COURSE AND PROGRAM INFORMATION

Transcription

1 COUSE AND POGAM INFOMATION UINTAH BASIN TECHNICAL COLLEGE August December 2018 TUITION AND FEE SCHEDULE POGAM FEES egistration $60.00 e-enrollment $20.00 Basic Assessment NO COST FULL TIME 6 HOUS/DAY - $2.00 H Welding, Carpentry, Culinary Arts, NA August 21 days $252 September 19 days $228 October 21 days $252 November 19 days $228 December 14 days $168 OOSEVELT 1100 East Lagoon Street oosevelt, UT VENAL 450 North 2000 West Vernal, UT PAT TIME 4 HOUS/DAY - $2.00 H Welding, Carpentry, Culinary Arts, NA August 21 days $168 September 19 days $152 October 21 days $168 November 19 days $152 December 14 days $112 Single Classes: (Day and Evening Classes): Tuition is due for the entire class at time of enrollment. Payment or sponsorship voucher for tuition must be received in advance. If competencies are not completed in the approved hours, students will need to pay for an additional class block in order to continue. DO YOU LIVE IN THE UINTAH BASIN? YOU QUALIFY FO A SCHOLASHIP! SCHOLASHIPS AVAILABLE TO ESIDENTS! Visit for more information EGISTATION AND TUITION Class times vary. See the individual class/program for specific details. Tuition costs vary for open-entry classes. The costs for individual scheduled courses are listed in this bulletin. Books and supplies are in addition to tuition costs. See the registrar for details. UBTech does not discriminate on the basis of race, color, national origin, sex, disability, or age in its programs and activities. The following person has been designated to handle inquiries regarding the non-discrimination policies: Vice President of Student Services, 1100 East Lagoon Street, oosevelt, Utah 84066,

2 HOW TO STAT ENOLL IN A POGAM To enroll into a program and obtain a certificate you need to make an appointment at the UBTech Student Success Center. Adult students are required to complete a basic assessment of reading and math skills. The test is free and takes approximately one-to-two hours to complete. Students who wish to be admitted into a program must complete the admission requirements for the specific program. Visit with Jim LaMuth or Amber Thacker at the UBTech Student Success Center for financial aid and scholarship information. Jim is available in Vernal and Amber is available in oosevelt. Complete registration for admission at the front office in Vernal or oosevelt. You can also begin entering your information in at POTAL.UBTECH. EDU/POTAL now and finish the registration process at the front desk. Enroll in your program, and pay a non-refundable $60.00 enrollment fee and other appropriate tuition and fees. ENOLL IN A CLASS The front office operates on a walk-in basis and is open 7:30 a.m. to 4:30 p.m. Monday through Friday in Vernal and oosevelt. egister at least one week before class begins. Scholarships are reserved for those taking programs. HIGH SCHOOL STUDENTS High school students may enroll and attend day or evening courses during the school year including summer after qualifying through their local school. If a student is interested in taking classes, they will need to contact the high school counselor and make arrangements with their high school schedule to attend UBTech. There are secondary certificates available, students benefit from free tuition. If a student attends a high school in surrounding areas and have counselor permission to attend UBTech, call Deniele Malnar, to schedule classes. STACKABLE CETIFICATES TANSFE TO USU! 1. Upon completing a 900-hour certificate at UBTech, 30 credit hours can be applied towards an Associate of Applied Science (AAS) degree at Utah State University - Uintah Basin. 2. Apply your associates degree toward a Bachelor of Science in General Technology at USU - Uintah Basin. Certificates at UBTech that qualify for 30 transferable credits to Utah State University: Auto Technology, Culinary Arts, Heavy Duty Diesel, Medical Assistant, Office Professional, Practical Nursing, Welding Advanced Technician, Security Technician*, Surgical Technologist* *Pending COE approval Student Success Center and Financial Aid information: Vernal Jim LaMuth oosevelt Amber Thacker OOSEVELT & VENAL: M-F 8:00 AM - 4:00 PM

3 FINANCIAL ASSISTANCE & SCHOLASHIPS Visit under FUTUE STUDENTS and FINANCIAL AID to view eligible programs and for more information. ANY POGAM Uintah County esident Duchesne County esident High School Senior esident UBTech Foundation Annuity MEDICAL obert L. & Areva Huish Helen Huish Uintah Basin Healthcare Ashley egional Medical Center CDL (TUCK DIVING) Uintah County esident CDL WELDING Miller/Norco Welding AUTOMOTIVE FEDEAL PELL GANT STATE GANT Maximum state grant award is $300. *Funds can be used for tuition, books, transportation, personal expenses and off-campus housing. VA EDUCATIONAL BENEFITS STUDENT LOAN DEFEMENTS L&L Automotive SINGLE MOTHES UBTech Allred s Annuity BASIC SKILLS You Got This Foundation PIVATE STUDENT LOANS Private student loans come from banks who offer personal student loans. It s money that may help a student pay for higher education expenses such as tuition and fees, books, supplies and tools, room and board, transportation and personal expenses. UBTech does not have a preferred lender list. Scholarship applications due three weeks prior to class/program start date. Scholarships are reviewed on an on-going basis. Filling out an application does not guarantee scholarship funds. VOCATIONAL EHABILITATION Provides services to assist eligible individuals in obtaining employment through Training Personal advisement Job placement assistance Eligibility depends on the presence of a physical or mental impairment which constitutes an impediment to employment. This includes a wide range of disabling conditions. Call oosevelt at or Vernal at to arrange for an orientation. WOKFOCE SEVICES Works with individuals to obtain employment through individual career counseling activities, which may include Additional skill enhancement Job placement Training services Support services Call for more information or visit a location near you. You can also apply online at jobs.utah.gov

4 HEAVY DUTY DIESEL All courses are taught to NATEF standards so that graduates will be prepared to pass the ASE industry standard tests. Students will gain experience in maintaining a fleet of diesel trucks that are used in the Truck Driver Training program at UBTech as well as compressors and other diesel powered equipment. HEAVY DUTY DIESEL Heavy Duty HVAC V 7/30-10/03 M-Th 3:00 p.m. - 6:00 p.m. $275 Preventive Maintenance V 7/30-10/03 M-Th 6:00 p.m. - 9:00 p.m. $275 Inspection Hydraulics V 10/08-12/12 M-Th 3:00 p.m. - 6:00 p.m. $275 Brakes V 10/08-12/12 M-Th 6:00 p.m. - 9:00 p.m. $275 Diesel Engines 1 Suspension and Steering V 12/17-02/28 M-Th 3:00 p.m. - 6:00 p.m. $275 V 12/17-02/28 M-Th 6:00 p.m. - 9:00 p.m. $275 Scholarship applications due three weeks prior to class/program start date. - Andrew Marquez Heavy Duty Diesel Student STATE VEHICLE SAFETY INSPECTION Call to get on waiting list Call to get on waiting list Passenger/Lt. Truck/Motorcycle* Tractor/Trailer/Bus 16 hrs 16 hrs $97 Tuition & Fees $12.50 Book $97 Tuition & Fees $12.50 Book TADES POST - PEACE OFFICE STANDADS & TAINING SATELLITE ACADEMY Application Deadline October 1, Schedule an appointment Student Success Center for enrollment process. Includes online application to POST, NPOST entrance exam (2 hours), and background check. Physical Entrance Exams will be scheduled early October. Uniforms must be purchased before 1st day of class. Approx cost is $350. A Special Function Officer allows a person to work in a limited number of Special Function positions such as constables, auxiliary officers, bailiffs, reserve officers, and other special function officers, as approved by the department. SFO must be completed before LEO or Correctional training. SPECIAL FUNCTION OFFICE (SFO) Special Function 10/ M-Th Officer 8:00 a.m. - 5:30 p.m. Cost: $952 + books, supplies The Basic Corrections Officer (BCO) is the fastest growing job in the law enforcement field. If you become a corrections officer, your primary duty will be to guard and supervise prisoners confined to penal institutions. Special Function Officer (SFO) is a prerequisite for the Basic Corrections Officer (BCO). BASIC COECTIONS OFFICE (BCO) AUTO TECHNOLOGY The program follows the curriculum guide of the National Automotive Technicians Education Foundation. Upon successful completion students will receive a Certificate of Completion. AUTO TECHNOLOGY Brakes 8/27-9/17 M-F 8:00 a.m. - 2:30 p.m. $230 Steering & Suspension 9/24/-10/23 M-F 8:00 a.m. - 2:30 p.m. $305 Industry Communications 10/29-11/02 M-F 8:00 a.m. - 2:30 p.m. $98 Electrical/ Electronic Systems 11/5-12/19 M-F 8:00 a.m. - 2:30 p.m. $360 - Jordan Wynn Welding Advanced Technician Student PIPE WELDING- Experienced welders may enroll to work toward certification as a pipe welder for the oil/gas industry. Combined with welding. Same schedule as welding. WELDING- Preparation for certification is available. Priority will be given to adult students. Two certificates available for adults. Welding certificates are also available to secondary students. Night Lab Night Lab Daytime WELDING WELDING 5:00 p.m. - V Year ound M,W 9:00 p.m. 5:00 p.m. - Year ound T, Th 9:00 p.m. &V August - May M-F 8:00 a.m. - 3:00 p.m. $100 fee + tuition per month $100 fee + tuition per month $100 fee + tuition per month For complete details on classes or recertification call Lezlee at Basic Corrections 1/02-2/04 M-Th Officer 8:00 a.m. - 5:30 p.m. Cost: $592 + books, supplies BLACKSMITHING & ONAMENTAL ION Students get hands-on experience in the process of forging, anvil work, making own tools, and heat treating steel. BLACKSMITHING & ONAMENTAL ION (60 HS)* 9/11-11/20 T,Th 5:30 p.m. - 8:30 p.m. $118 1/16-3/22 T,Th 5:30 p.m. - 8:30 p.m. $118 *MUST be registered a week in advance In addition to enforcing laws, police officers are primarily responsible for protecting lives and property. Upon successful completion, students will be prepared to respond to calls, conduct traffic stops, issue citations, arrest suspects, investigate domestic issues, write detailed reports, patrol, give first aid to accident victims, and more. LAW ENFOCEMENT OFFICE (LEO) Law Enforcement Officer 2/19-4/9 M-F 8:00 a.m. - 5:30 p.m. Cost: $ books, supplies CAPENTY Students get hands-on experience in the actual construction of a home. The student is involved in all phases from planning and drafting to foundation, framing, and finishing work. Daytime CAPENTY &V August - May M-F 8:00 a.m. - 3:00 p.m. Tuition+Fees

5 MEDICAL & HEALTH POGAMS NEW POGAM! SUGICAL TECHNOLOGIST (1265 HOUS) Surgical Technologists are members of an operating room team, which includes the surgeon(s), anesthesia provider, and circulating nurse. Their primary function is to fulfill the first scrub role and to help with the preparation of the operation room by setting up sterile surgical equipment, checking equipment for proper functionality, and assisting the surgeon with instruments and supplies while maintaining the sterile field. Please make an appointment with UBTech Student Success Center for details and enrollment at Scholarships due three weeks prior to start date. SUGICAL TECHNOLOGIST V 8/20 M-F 8:00 a.m. - 3:00 p.m. $795+books and fees PACTICAL NUSING (COE 900 HOUS) The practical nursing program begins each fall. Application deadline is May 30. You can apply if your prerequisites will be completed before classes start August 22. Contact Student Success Center for more information and application process at Upon completion, 30 credits are stackable to Utah State University, contact USU for more details. The Practical Nursing program is accredited by ACEN (Accreditation Commission for Education in Nursing): 3343 Peachtree oad NE, Suite 850, Atlanta, GA Phone or Fax MEDICAL ASSISTANT (940 HOUS) Training will prepare students with the skills to assist in clinics and health maintenance organizations. Medical Terminology will be also included inside the program. Scholarships available. Students must be 18 by May 1. Please make an appointment with admissions for details and enrollment at Application deadline is August 1. Scholarships due three weeks prior to start date. MEDICAL ASSISTANT 8/22-5/24 M-F 8:00 a.m. - 3:00 p.m. $2690 Medical terminology, medical anatomy and physiology, and business communications are included in the program, but may be taken separately. PHAMACY TECHNICIAN (600 HOUS) Students will learn to interpret, calculate, and fill medication orders, as well as all other skills needed to assist the Pharmacist. This course prepares students to take the National Pharmacy Technician Exam and to get licensed as a Pharmacy Technician in the State of Utah. Clinical hours will be completed on your own time, after school and on weekends. Students must be 18 years old by May 1. See admissions for applications or online at UBTech.edu. Entrance is based on the date of completed application. Limit of 12 students. Scholarships are available for this program. Contact the instructor for more information: katrina@ubtech.edu or Application deadline is July 21. PHAMACY TECHNICIAN 8/22-5/24 M-Th 8:30 a.m. - 11:30 p.m. $1637 +books NUSING ASSISTANT (100 HOUS) This course will enable the student to render safe and meaningful care to clients in acute and longterm care and to assist a licenced nurse. Practical skills of personal, emotional, and social care will be emphasized. This course prepares students to take the state CNA exam. It includes 76 hours of class instruction and 24 hours of clinical externship. Must be 16 years old. *State examination fee of $75 must be paid by the student directly to the Utah Nursing Assistant egistry, after completing the class. Must be 16, immunizations required. NUSING ASSISTANT Daytime 9/5 M-F 11:45 a.m. - 2:45 p.m. Daytime V 9/6 M-F 12:00 p.m. - 3:00 p.m. Evening* 9/10 M,Th 6:00 p.m. - 10:00 p.m. $328+books *Must be 16 by first day of class. Must register by start date. Scholarships due three weeks prior to start date. MEDICAL TEMINOLOGY COUSE This course provides the student with the skills necessary to interpret and understand medical terminology, in order to be successful in the pursuit of health occupation careers. MEDICAL TEMINOLOGY COUSE August 23 Alternating Days 10:30 a.m.-11:45 a.m. V Sept-May M-F () 10:30 a.m. -3:00 p.m. PHLEBOTOMY COUSE Upon completion, students will be prepared to obtain blood samples in all settings and eligible to take a National Certifying Exam. Limit of 12 students, must be 18 years old and must have high school diploma or GED. PHLEBOTOMY 10/2-11/6 T, Th 5:00 p.m. - 10:00 p.m. $515 - Faith Burk, Practical Nursing Student - Jennilyn DeLos Santos, Medical Assistant Student - Kimberly eary, Pharmacy Technician Student

6 OFFICE POFESSIONAL (900 HOUS) This certificate offers courses that will enhance any resume. Gain computer and business skills that will help you become more employable or give you that edge you need to become a more valuable employee. In our technology-driven world, utilize the opportunity to learn the newest techniques and tools. From communication to social media to everyday professionalism, these courses will give you the most up-to-date skills currently needed. Contact the UBTech Student Success Center to enroll into the Office Professional program today at Scholarships are due three weeks prior to class/program start date. EQUIED Business Communication I Business Communication II Customer Service MS Word MS Excel ecords Management OOSEVELT UBTECH CAMPUS AUGUST 22 - OCTOBE 31 (M-F) Customer Service 8:00 a.m. - 9:15 a.m. $170 Video 9:15 a.m. - 10:30 a.m. $170 QuickBooks 9:15 a.m. - 10:30 a.m. $170 Photoshop 10:30 a.m. - 11:45 a.m. $170 MS Word 11:45 a.m. - 1:00 p.m. $170 Business Communication I 1:30 p.m. - 2:45 p.m. $170 Tax Preparation 2:45 p.m. -4:00 p.m. $170 NOVEMBE 1 - JANUAY 24 (M-F) ecords Management 8:00 a.m.-9:15 a.m. $170 Google Tools/Apps 9:15 a.m. - 10:30 a.m. $170 Illustrator 10:30 a.m. - 11:45 a.m. $170 MS Excel 11:45 a.m. - 1:00 p.m. $170 Business Communication II 1:30 p.m. - 2:45 p.m. $170 SUPEVISOY AND MANAGEMENT ESSENTIALS Supervisory and Mgmt. Essentials 9/4-12/20 T, Th 7:00 a.m. - 9:00 a.m. $170 H Essentials 10/25-11/13 T, Th 7:00 a.m. - 9:00 a.m. $54 Accounting I Accounting II QuickBooks Tax Preparation Account eceivables Mgmt. Payroll Workbased Learning Specialized Training ELECTIVE CHOICES Web Site Creation Social Media Marketing Video Illustrator InDesign Photoshop Google Tools/Apps Digital Communication I Digital Communication II VENAL UBTECH CAMPUS AUGUST 20 - NOVEMBE 14 (M-F) Tax Preparation 7:45 a.m.-8:51 a.m. $170 Photoshop 9:01 a.m.-10:07 a.m. $170 Business Communication I 10:17 a.m.-11:23 a.m. $170 MS Word 11:33 a.m.-12:39 p.m. $170 Accounting I 1:19 p.m. - 2:25 p.m. $170 NOVEMBE 15 - FEBUAY 22 (M-F) Payroll Accounting 7:45 a.m.-8:51 a.m. $170 Social Media Marketing 7:45 a.m.-8:51 a.m. $170 Illustrator 9:01 a.m.-10:07 a.m. $170 Business Communication II 10:17 a.m.-11:23 a.m. $170 MS Excel 11:33 a.m.-12:39 p.m. $170 Accounting II 1:29 p.m. - 2:25 p.m. $170 CULINAY ATS (990 hours) The Culinary Arts program at UBTech gives students real life experience working in the food service industry in a working restaurant environment. Students will prepare a variety of foods from soups, sauces, stocks, meat fabrication, vegetable preparation, proper cooking methods, and the basics of baking. Students will develop their management skills and become familiar with inventory controls, food costing, understanding proper receiving and the flow of food and sanitation. They will also gain an understanding of different types of table service and catering event setup pertaining to the front of the house. CULINAY ATS Year ound M-F 7:00 a.m. - 2:00 p.m. Serv Safe esfresher* Serv Safe Sanitation** SEV SAFE - WOKSHOPS AVAILABLE 8-hours M-F 7:00 a.m. - 2:00 p.m. $82 30-hours M-F 7:00 a.m. - 2:00 pm. $96 +book *This course is an 8-hour accelerated course for industry professionals who have been Serv Safe certified before (instructor approval needed before you can register for this course). ** This course is for individuals who are certifying for the first time. Students will have the opportunity to get an in-depth look at all aspects of Serv safe course in 30 hours of training.

7 BUSINESS & INDUSTY POGAMS IT Support Technician prepares students with skills in basic IT information, troubleshooting hardware and software issues, basic networking, and security. Students will also be taught appropriate customer service skills. Students will be prepared with the necessary skills for employment in IT support, help desk, and call centers. Building off IT Support Technician hours, Network Technician prepares students with skills to secure a network by developing network access and to maintain documentation while providing reference and support. Students will be prepared with the necessary skills for employment in network administration as a network specialist. Building off Network Technician hours, Security Technicians provide support services to industry with security needs. This program prepares students with skills to install and integrate security systems. Students will be able to plan network installations, as well as order and mount appropriate equipment. Students will understand industry standards and documentation. Students will be prepared with the necessary skills for employment as a security specialist. NEW POGAMS! IT SUPPOT TECHNICIAN (600 hours)* Year ound IT SUPPOT TECHNICIAN M-Th F 11:30 a.m. - 7:00 p.m. 10:30 a.m. - 1:30 p.m. NETWOK TECHNICIAN (800 hours)* Year ound NETWOK TECHNICIAN M-Th F 11:30 a.m. - 7:00 p.m. 10:30 a.m. - 1:30 p.m. SECUITY TECHNICIAN (1000 hours)* Year ound SECUITY TECHNICIAN M-Th F 11:30 a.m. - 7:00 p.m. 10:30 a.m. - 1:30 p.m. FAM AND ANCH BUSINESS MANAGEMENT This program provides individualized training for farmers/ranchers. Farms are assisted in keeping a complete set of financial records through monthly instructor visits, record-keeping practices and computer recordkeeping systems, including Quicken, QuickBooks, etc. This program meets the requirements for FSA borrower training. For more information, contact David Gillman at or Basic Course ($204/year) Or Advanced Course ($240/year) CIVIL DAFTING TECHNICIAN (360 hours)* Civil Drafting Technicians provide support services to civil engineers and surveyors. This program prepares students with skills in AutoCAD, Civil 3D, hydrology, road design, sewer design, oil and gas field design, and land survey documentation, including core instruction in civil design principles and industry expectations. Students will be prepared with the necessary skills for employment in a civil engineering office or a land surveyor s office. AUGUST 20 - NOVEMBE 14 (M-F) V CAD Architecture 1 7:45 a.m. - 8:51 a.m. $170 V CAD Mechanical 1 & 2 9:01 a.m. -10:07 a.m. $170 V Civil 3D 1* 10:17 a.m. - 11:23a.m. $170 V CAD Mechanical 1 & 2 11:33 a.m. -12:39p.m. $170 NOVEMBE 15 - FEBUAY 22 (M-F) V CAD Architecture 1 7:45 a.m. - 8:51 a.m. $170 V CAD Architecture 1 & 2 9:01 a.m. -10:07 a.m. $170 V CAD Mechanical 1 & 2 10:17 a.m. - 11:23a.m. $170 V Civil 3D 1* 11:33 a.m. -12:39p.m. $170 V Civil 3D 2* 1:19 p.m. - 2:25 p.m. $170 *Must complete CAD Mechanical 1 & 2 prior to starting Civil 3D. VISIT THE CULINAY CAFE FO LUNCH! 11:30 a.m. - 1:20 p.m. Tuesday - Thursday oosevelt UBTech Campus Like UBTech Culinary Arts on Facebook to stay informed on program workshops and cafe specials!

8 ECONOMIC DEVELOPMENT WHAT IS CUSTOM FIT? Custom Fit funding is made available through the Utah Legislature for economic and workforce development through training partnerships between Utah companies and the Utah System of Technical Colleges. ECONOMIC DEVELOPMENT AND CUSTOM FIT POGAMS Custom Fit funding may be available to assist with qualifying training costs. What Can CUSTOM FIT Do For Your Business? CUSTOM FIT works with Utah businesses of every size providing 40% funding assistance for approved trainings, technical training, safety certifications, leadership and management skills development, and more. APPLYING FO CUSTOM FIT IS SIMPLE The company provides basic contact information, a brief description of company, the training your employees will need and the costs. The company signs a one-page agreement stating they agree to pay their 60% share of training costs. New Custom Fit Funding Available! FO MOE INFOMATION ON HOW CUSTOM FIT CAN WOK WITH YOU BUSINESS CONTACT LEZLEE WHITING BEGINNING SPANISH Say HOLA to learning how to communicate with your Spanish speaking customers, co-workers, patients, clients, friends, neighbors and family members. This popular 10-week evening course is taught by instructor Dan Burk. Learn the basics of Spanish, the second most widely spoken language in the U.S. Students receive oneon-one help. Classes are held in Vernal, Wednesday night, 7 9 p.m. September 12 - November 14. Cost: $175. Class size is limited, register early. Ask about Custom Fit for 40% discount. NEW! ENTEPENEUS! LEAN HOW TO SELL ON AMAZON & ETSY Learn the insider tricks of the trade and the step-by-step process to sell your homemade goods or commercial product on Amazon and Etsy. Three proven Amazon and Etsy sellers will answer your questions while sharing how they launched their business on these sites and how you can do the same. This half-day seminar will be held in oosevelt, Thursday, September 27th, 9 a.m. noon. Cost $50/person or $30/person for your company through the Custom Fit 40% training discount. For additional information and to pre-register call EXCEL WOKSHOPS Build your confidence and abilities when using Excel. Working knowledge of Excel is a resume booster. Six-hour Excel Workshop will be scheduled 9 a.m. - 4 p.m. based on request. Dates to be announced. Beginning, Beginning/Intermediate and Intermediate/Advanced levels taught. Call to get on the waiting list, or schedule a workshop for your company. Cost $75/ person. Custom Fit funding for eligible companies reduces cost 40%. HUMAN ESOUCE MANAGEMENT CETIFICATE Boost your employability with this 11-week intensive H evening course held in Vernal, Tuesday nights, 5:30 9:30 p.m. via interactive EDNET system, taught by Frances Hume. Virtual attendance available for missed classes. Enhance your resume, prepare for PH or SPH exams, obtain general recertifi cation CEUs, updates on HM best practices and changes in H law. Class runs Tuesday, September 4th. Custom Fit funding available to pay 40% of cost for your business. egistration deadline is August HOU PLUMBE CONTINUING ED (Taught in 1 day) Plumbers must have 12 hours of continuing education credits by November 30th to relicense. Course includes 10 hours code instruction with Dean Johnson and 2 hours professional with Marty Ellis, Viega District Manager. oosevelt, September 14th, 7 a.m. 7 p.m. with lunch served and refreshments. Twelve hours $125/ 6 hours (or less) $70. Custom Fit available for eligible companies, reduces cost by 40 percent. Pre-register now to be eligible for Custom Fit. All CE credits are DOPL approved. To register call Lezlee For more information or to register on any of these offerings, please contact Lezlee Whiting at NEW HIE SKILLS WOKSHOP Four-hour workshop reviews job skills that employers expect of employees: Teamwork, Customer Service, Conflict esolution, Communication, Proper Dress, Meeting Expectations, and Loyalty. Cost $38/person. Held 8:30 a.m. to 12:30 p.m. Vernal or oosevelt. Call to schedule a customized workshop for your company. WOK BETTE TOGETHE The Myers Briggs Type Indicator (MBTI) is the most widely used personality assessment in the world. Type can be introduced in an organization or business to help manage others, develop leadership skills, aid in conflict resolution, assist in change management, and determine communication and decision making styles. Training and costs will vary depending on the business s needs. Ask about Custom Fit for 40% discount. NEC UPDATE (Last Chance!) DOPL approved continuing education classes for electricians, journeymen, apprentices, and contractors. Electricians must complete 16 hours of continuing education every two years. NEC Update (2017) offered in Vernal, September 7-8 (Friday & Saturday). Cost: 16 hours $250 / 8 hours $150. Custom Fit available for eligible companies, reduces tuition and code book costs by 40 percent. Pre-register now to be eligible for Custom Fit. CE hours are reported to DOPL by UBTech. CE hours must be completed by November 30th. Instructor is yan Jackson, a soughtafter code seminar presenter who is an approved NEC provider in several states. VEHICLE SAFETY INSPECTION Heavy duty trucks (TTB) Safety Inspection (16 hours) offered based on requests, Vernal, $109.50/person. Call to get on waiting list, (*Passenger/light truck/ motorcycle - PLTM safety inspection offered as required for your company needs, call to set up dates and for cost.)

9 ENEGY SEVICES POGAMS IADC WELLSHAP WELL CONTOL POGAMS UBTech has state-of-the-art well control simulators with updated computer software and hardware, a modern joystick that will control breaking and throttle in a simultaneous action/motion and includes camera controls. The simulators are equipped with a main display to produce 3-D graphics needed to facilitate a realistic training experience, full 3-D automation of top-drive drilling and Kelly bushing drilling, and a student touch screen console. These simulators comply with IADC and IWCF standards for certification requirements. WELL CONTOL Well Control Supervisor (Drilling) (4-day) COMING SOON: OIL AND GAS OPEATO EPESENTATIVE WOKOVE AND INTEVENTION WELL CONTOL (5-DAY) V Drilling Workover Endorsement (8 hours)* V Service Company Equipment Operator Workover (5-day) V Call to schedule Call to schedule Call to schedule *Must be also enrolled in Well Control Supervisor Program. This endorsement is offered the following day. All courses provide 2-year IADC Wellsharp certifications $812 $213 $895 NEW POGAMS! AUTOMATION TECHNICIAN (600 HOUS)* The Automaton Technician program is intended to deliver a fundamental understanding of electricity and automation procedures and practices. The program prepares students for careers in Automation to meet the demanding requirements for safety and reliability in product production. Students will learn electrical theory and applications, programing, communication and networking relative to automation controls used in the Automation industry. This is a hybrid program with scheduled lab and lecture times. AUTOMATION TECHNICIAN 6:00 p.m. - 8/22-6/12 T - Th $1260+fees 10:00 p.m. OIL & GAS TECHNICIAN (260 HOUS)* The Oil and Gas Technician program is designed to meet the needs of the oil and gas industry. The program provides the training, identified by local industry, to work in the oil and gas related fields. The training combines both the technical skills and the necessary soft skills to succeed as an Oil and Gas Technician. This is a hybrid program with scheduled lab and lecture times. OIL & GAS TECHNICIAN 6:00 p.m. - V 8/20-12/19 M - Th $580+fees 10:00 p.m. 6:00 p.m. - V 1/07-5/09 M - Th $580+fees 10:00 p.m. CDL (420 HOUS) Numerous jobs exist for truck drivers. A CDL license can open the door to gainful employment. Instruction is a mix of behind-the-wheel and classroom training. Our 420-hour course covers Pre-trip/Post-trip Coupling/Uncoupling Mountain, Night & Dirt oad Driving Log book Airbrake Adjustment Large Driving/Backing ange Variety of Big igs Empty/Loaded/Bobtail Students typically finish course in 10 to 12 weeks. Training offered at both Vernal and oosevelt. Upon successful completion a student receives CDL license with initial endorsements, HAZMAT endorsements, brake adjustment, and certifications. Training package includes physical, drug screening and third party testing. CDL Year ound 8:00 a.m. - V M-F 4:00 p.m. Year ound 8:00 a.m. - M-F 4:00 p.m. Scholarship application deadline is the 2nd Friday of each month. SCHOLASHIP APPLICATION DEADLINE due 3 weeks prior to start date. $ books $ books ELECTICAL APPENTICE Electricians are responsible for the safe installation and maintenance of electrical wiring. Levels 1A 4A taught first semester. Levels 1B 4B taught second semester. First class taught in oosevelt. ELECTICAL APPENTICE Electrical Alternating Apprentice Vernal/oosevelt 6:00-10:00 p.m. $335 + books 1A & 3A 9/10-11/14 M,W 2A & 4A 9/11-11/20 T,Th

10 ENEGY SEVICES OFFEINGS PEC BASIC 10 Basic/10 provides awareness training in a variety of safety topics and eliminates the need to send workers for separate OSHA 10 and SafeLand training saving time and money without sacrificing the quality of worker training and safety knowledge. Upon course completion, workers will have gained the knowledge to recognize workplace hazards, an awareness of their rights in the workplace, and the capacity to encourage safe work practices adding momentum to the culture of safety you have built in your organization. PEC H2S CLEA This course not only improves safety performance, it also prepares general industry workers by providing crucial knowledge of the dangers of H2S and all the precautions, tools and controls necessary when working in H2S environments. This course has no prerequisite and covers the current classroom requirements of ANSI Z390.1 and is designed to meet the new ANSI requirements. PEC H2S Clear can also be used to enhance our other training courses such as PEC Basic Orientation, PEC Basic/10, or PEC Core Compliance. COMPLIANCE POGAM BUILDING Do you have the required written OSHA programs for your business? Our new Compliance Program Building Course is designed to help identify and build the programs you need to stay compliant to OSHA and other regulatory agencies. This course focuses on management, leadership and employee involvement, worksite analysis and hazard prevention and control, and safety and health training and education. Students will learn what written programs are needed based on their industry as well as the requirements for programs such as fall protection, general safety and health programs, HAZCOM, Permit required confined space, respiratory protection, lockout/ tagout and many more. For questions or scheduling, please call Kimberli Wadsworth or Gary Duncan SAFETY MEDIC FIST AID/CP WITH AED - For schedule, please Kimberli at kimberliw@ubtech.edu or call Cost: $60 Combine with H2S + FA/CP/AED = Cost: $85 CHILD/INFANT FIST AID/CP ENDOSEMENT- Ideal for day care providers, teachers, babysitters, nursery workers, parents and grandparents. FOKLIFT COUNTE BALANCE O OUGH TEAIN - IVES Training System will help ensure your company s mobile equipment operator training. Meets or exceeds all applicable industry standards and government regulations in certifying/qualifying your operators of forklifts. Classroom training and equipment evaluation. IVES AEIAL LIFTS- Aerial lifts, man lifts, knuckle boom, and scissor lift. Fulfills OSHA requirements to include classroom and practical evaluation. Available upon request. H2S HYDOGEN SULFIDE COMPLIANCE- This is a 2-hour class. or schedule, please Kimberli at kimberliw@ubtech.edu or call Cost: $51 PEC SAFELAND- The Operators listed below recognize and support the SafeLand Orientation, with a primary goal of reducing the number of preventable accidents in our industry s journey to zero accidents. SafeLand is recognized by Anadarko, Exxon Mobil, EnCana, BP, Newfield, Bill Barrett, Crescent Point and many others. Held monthly, 8:00 a.m. Cost: $112 PEC COE COMPLIANCE- This training program will insure your employees are trained in the safety topics commonly required by operators. ESPIATOY POTECTION & FIT TEST- Procedures for fitting a respirator to protect against hazardous gases. HAZCOM GHS AWAENESS- New chemical labeling mandate. This 2-hour class is held by request with on-site training available at your business. Please call to schedule. Cost: $38 HAZWOPE - Let UBTech provide the knowledge and skills necessary to ensure the safety of response personnel when taking action to contain and control releases of hazardous materials or response to disaster events that have impacted the workplace and community. This training will aid employers in compliance with local, state and federal regulations applicable to spill and disaster response cleanup. UBTech offers 8 hour refresher and 24 & 40 hour trainings. Call Kimberli Wadsworth at for more information.

11 To view schedule: Visit ubtech.edu Under Certificates and Programs Energy Services OSHA Training OSHA TAINING INSTITUTE EDUCATION CENTE OSHA #500 Trainer Course in OSHA Standards for Construction OSHA #501 Trainer Course in OSHA Standards for General Industry OSHA #502 Update for Construction Industry Outreach Trainers OSHA #503 Update for General Industry Outreach Trainers OSHA #510 Occupational Safety and Health Standards for the Construction Industry OSHA #511 Occupational Safety and Health Standards for General Industry OSHA #521 OSHA Guide to Industrial Hygiene OSHA #2015 Hazardous Materials OSHA #2225 espiratory Protection OSHA #2255 Principles of Ergonomics (formerly OSHA #2250) OSHA #2264 Permit-equired Confined Space Entry OSHA #3015 Excavation, Trenching and Soil Mechanics (formerly OSHA #3010) OSHA #3095 Electrical Standards OSHA #3115 Fall Protection (formerly OSHA #3110 Fall Arrest Systems) OSHA #5810 Hazards ecognition & Standards for On-Shore Oil and Gas Exploration and Production OSHA #6000 Collaborative Duty Course for Other Federal Agencies. OSHA #7005 Public Warehousing and Storage OSHA #7100 Introduction to Machinery and Machine Safeguarding OSHA #7105 Evacuation and Emergency Planning OSHA #7115 Lockout/Tagout OSHA #7205 Health Hazard Awareness OSHA #7225 Transitioning to Safer Chemicals OSHA #7300 Understanding OSHA s Permit-equired Confined Space Standard OSHA #7400 Noise Hazards in the Construction Industry OSHA #7405 Fall Hazard Awareness for the Construction Industry OSHA #7410 Managing Excavation Hazards OSHA #7415 Construction Industry Hazards and Prevention Strategies OSHA #7500 Introduction to Safety and Health Management OSHA #7505 Introduction to Incident Investigation OSHA #7510 Introduction to OSHA for Small Businesses OSHA #7845 ecord keeping ule Seminar OSHA 10 hr. Outreach General Industry OSHA 30 hr. Outreach General Industry OSHA 10 hr. Outreach Construction Ind. OSHA 30 hr. Outreach Construction Ind. For more information regarding OSHA courses, please call Kimberli at or kimberliw@ubtech.edu PUBLIC SECTO SAFETY AND HEALTH CETIFICATE GENEAL INDUSTY equired: (3) #511 #7500 #7505 Electives: (4) minimum of 29 contact hours #3095 #7000 #7005 #7100 or #2045 #7105 #521 #2255 #7115 #7200 #7205 #7210 #7845 #2264 or #7300 CONSTUCTION equired: (3) #510 #7500 #7505 Electives: (4) minimum of 29 contact hours #3095 #3115 or #7405 #7105 #7110 #2264 #2255 #7205 #7400 #7845 #3015 or #7410 #521 PUBLIC SECTO SAFETY & HEALTH CETIFICATE The certificate program in Public Sector Safety & Health Fundamentals supports OSHA s mission by training public sector employees in occupational safety and health to reduce incident rates for workers in state and local governments. Participants have the opportunity to earn certificates for Construction and General Industry training. Participants can choose from a variety of topics such as occupational safety and health standards for the construction or general industry, safety and health management, accident investigation, fall hazard awareness, and record keeping. OSHA 10-HOU GENEAL INDUSTY Taught monthly. Two-day course. Preregistration required. OSHA 10-HOU CONSTUCTION Teaches construction workers about their rights, employer responsibilities and how to identify, abate, avoid and prevent job related hazards. Approved for Contractors Continuing Education credits. Scheduled by request. TANSPOTATION COUSES DOT HAZMAT/HM126 Workshop can be taught at UBTech in Vernal or oosevelt or company facility. Offered upon request. CDL WINTE DIVING CUSTOMIZED WOKSHOP Topics include DOT regulations, slick road driving, chain up, driver evaluations, etc. Offered upon request. Vernal/oosevelt. Offered upon request. DOT-UHP 4-HOU WOKSHOP Presentation by UHP Trooper includes: What to expect in a DOT inspection, oilfield exemptions & motor carrier regulations. Call for dates. AIBAKE WOKSHOP Workshop can be taught at UBTech in Vernal, oosevelt or at your place of business. Offered upon request. DOT LOG BOOK TAINING Designed for individuals and employers who need to know and discuss applicable DOT laws regarding Hours-of-Service regulations and proper log book completion. Offered upon request. Vernal. CDL 3D PATY TESTING UBTech can administer Utah 3rd Party Test for a CDL license. You can use a UBTech truck to take the test if needed. Test must be scheduled more than 48 hours in advance. Call Tammy Smith at to schedule a test and for more information. NATIONAL SAFETY COUNCIL DEFENSIVE DIVING available to companies only DEFENSIVE DIVING FO THE POFESSIONAL TUCK DIVE: 4-hour National Safety Council course. Offered upon request in Vernal/oosevelt. Six-hour National Safety Council course for the Professional Truck Driver.

12 POGAMS Business & Industry oosevelt Campus Only Culinary Arts IT Support Technician* Network Technician* Security Technician* Vernal Campus Only Civil Drafting Technician* oosevelt & Vernal Campuses Office Professional Farm & anch Business Management Medical oosevelt Campus Only Medical Assistant Pharmacy Tech Practical Nursing Vernal Campus Only Surgical Technologist* oosevelt & Vernal Campuses Nursing Assistant Trades oosevelt Campus Only Auto Technology POST - Peace Officer Standards & Training Satellite Academy Vernal Campus Only Heavy Duty Diesel oosevelt & Vernal Campuses Electrical Apprenticeship Welding Carpentry Energy Services oosevelt & Vernal Campuses Energy Services Safety CDL Vernal Campus Only Oil & Gas Technician* Well Control Supervisor oosevelt Campus Only Automation Technician* High School Only oosevelt & Vernal Campuses Automotive Maintenance & Light epair Cabinetry Welding Basic Technician EXPEIENCE THE POWE OF TECHNICAL EDUCATION OOSEVELT 1100 East Lagoon Street oosevelt, UT VENAL 450 North 2000 West Vernal, UT DS! O C E U O Y ACCESS.EDU/POTAL BTECH L.U VISIT: POTA t records, n e d u t s r u Access yo des, and account s, gra transcript balance! Like UBTech on Facebook for updates and giveaways! UBTECH COMMUNITY EVENTS! AUGUST - FEE UBIC BEAKFAST oosevelt UBTech Friday, August 3 6:30 a.m. SEPTEMBE - ANNUAL UBTECH FOUNDATION GOLF CLASSIC oosevelt Golf Course September 14 egistration: 7:00 a.m. - 7:45 p.m. Tee Off: 8:00 a.m. Tournament Fee: $450 per Team Format: 4-Man Scramble egister at ubtech.edu/golf or here >> OCTOBE - TECHNICAL EDUCATION SUMMIT Duchesne Wednesday, October 3 6:00 p.m. oosevelt Thursday, October 4 6:00 p.m. Vernal Wednesday, October 10 6:00 p.m. NOVEMBE - UCK UN Vernal UBTech Saturday, November 10 CAEE COUNSELING The UBTech Student Success Center in Vernal and oosevelt offer career counseling to anyone considering classes at UBTech. Call for more information. UBTECH STUDENT SUCCESS CENTE The Student Success Center assists individuals in succeeding in their choice of academic studies by providing a variety of testing services. Call to schedule a test. The Testing Center is an authorized site for the following organizations: ASE Prometric Utah Nursing Assistant egistry ocky Mountain Gas Association (MGA) National Police Officer Selection Test (NPOST) MBTI Myers-Briggs Type Indicator Strong Interest Inventory TABE Placement Tests Pearson Vue Basic Skills Class Basic Skills Class BASIC SKILLS CLASS 10:00 a.m. Year ound T, Th - 2:00 p.m. $100 M, V Year ound W 10:00 a.m. $100-2:00 p.m. SENIO CITIZENS Senior Citizens (62 or older) will receive an 80% discount for individual classes. Enrollment will be allowed on a space available basis. Community education and other self funded classes are exempt from the senior discount. No grade or certificate will be awarded. An Audit will be given. Bus transportation available between Vernal and oosevelt campuses. visit