Part 48 Training Program Optional Training Plan Format
|
|
|
- Muriel Beasley
- 6 years ago
- Views:
Transcription
1 8/16/13 Annual Refresher Training Program Part 48 Training Program Optional Training Plan Format Independent Contractors Coal Surface Mines ID# FN4 7/31/2013 6:46:41 PM Annual Refresher Training Program Section Each miner will receive a minimum of 8 hours of annual refresher training. However, the time spent for each course may vary to meet specific needs, such as changes in mining conditions, accident history or other safety and health problems. Predicted time of each session of refresher training is Annually. Predicted length of each session of refresher training is One 8-hour session. Subjects 1. Mandatory health and safety standards[ 48.28(b)(1)J Approximate Time: ~"~"' ' applicable regulations, company, MSHA, vendor/manufacturer ~~,.,......,._., -. -~ 2. Transportation controls and communication systems[ 48.28(b)(2)] Approximate Time: applicable regulations, company, mine communication systems, MSHA, vendor/manufacturer, warning signals/directional signs 3. Escape and emergency evacuation plans; firewarning and firefighting[ 48.28(b)(3)J Approximate Time: audio/video, discussion, lecture, site tour applicable regulations, company, escape and emergency evacuation plans, firewarning signals and firefighting procedures, mine escape system, MSHA 4. Ground control; working in areas of highwalls, water hazards, pits and spoil banks; illumination and file:/1/c:/users/pprielo/documentstvvork/msha INFO/MSHA TRAINING PLAN AND PAULS INTRUCTOR ID NUMBER/UPDATED TRAINING PLAN/Ann... 1/3
2 8/16/13 Annual Refresher Training Program night work[ 48.28(b)(4)J audio/video, discussion, lecture applicable regulations, company, highwall and ground control plans, MSHA 5. First aid[ 48.28(b)(5)J 2:00 [hrs:mins], AED applicable regulations, company, first aid supplies, MSHA, vendor/manufacturer 6. Electrical hazards[ 48.28(b)(6)J 2:00 [hrs:mins] audio/video, discussion, lecture, Locks & Tags applicable regulations, company, lockout devices, MSHA, vendor/manufacturer 7. Prevention of accidents[ 48.28(b)(7)J From 0:30 to 2:00 [hrs:mins] audio/video, discussion, lecture accident reports, applicable regulations, company, MSHA, vendor/manufacturer 8. Health[ 48.28(b)(8)J 1977 Mine Act, applicable regulations, company, dosimeters, dust control plan, health control plans, MSDS, MSHA, protective equipment, warning labels ~ ---~--~ ~ ~-~ Explosives[ 48.28(b)(9)J audio/video, discussion, lecture applicable regulations, company, MSHA, vendor/manufacturer 10. Self-rescue and respiratory devices[ 48.28(b)(10)J applicable regulations, company, MSHA, training devices, vendor/manufacturer fit test, file:///c:/users/pprieto/documents/work/msha INFO/MSHA TRAINING PLAN AND PAULS INTRUCTOR ID NUMBER/UPDATED TRAINING PLAN/Ann
3 8/16/13 Annual Refresher Training Program Total Minimum and Maximum Time Total Minimum: Total Maximum: 8:00 [hrs:mins] 9:30 [hrs:mins] Remarks First-Aid,CPR, AED file:///c:/users/pprieto/docurnents/work/msha INFO/MSHA TRAINING PLAN AND PAULS INTRUCTOR ID NUMBER/UPDATED TRAINING PLAN/Ann... 3/3
4 8/16/13 Certified and Qualified Training Program Part 77 Training Program Optional Training Plan Format Independent Contractors Coal Surface Mines ID# FN4 7/31/2013 6:46:41 PM Certified and Qualified Training Program Section General Information 1. Company and mine names MSHAID# Company Name Address Mine Name FN4 Arnold Machinery Co, SALT LAKE CITY, UT84130 n/a4 2. Person responsible for health and safety training at the mine Name Position/Title Phone Number Dan Bletzacker Director: Environmental Health & Safety (801) Location(s) where training will be given Certified Persons Qualified Persons minesite minesite Certified Persons Section (a) The following program is for training and retraining persons whose work assignments require they be certified. Subjects file:///c:/users/pprieto/documents/work/msha INFO/MSHA TRAINING PLAN AND PAULS INTRUCTOR ID NUMBER/UPDATED TRAINING PLAN/Ger... 1/3
5 8/16/13 Certified and Qualified Training Program 1. Tasks and duties performed as a certified person[ (a)J applicable regulations, company, devices, MSHA, safe work procedures, vendor/manufacturer 2. First aid[ (a) & (b)] Initial Training: Refresher Training: 30 hours 30 hours applicable regulations, company, first aid supplies, MSHA, vendor/manufacturer 3. Provisions of Part 77 [ (a)J audio/video, discussion, lecture 1977 Mine Act, applicable regulations, company, company rules, MSHA Qualified Persons Section (b) The following program is for training and retraining persons whose work assignments require they be qualified. Subjects 1. Tasks performed as a qualified person( (b)], site tour applicable regulations, company, devices, MSHA, safe work procedures, vendor/manufacturer 2. Electrical[ ] This training will utilize an electrical program approved by the Secretary of Labor in accordance with Section Hoisting[ ] applicable regulations, company, mine equipment, MSHA, vendor/manufacturer 4. Refuse/lmpoundment inspection( ] file:///c:/users/pprieto/documents/workjmsha INFO/MSHA TRAINING PLAN AND PAULS INTRUCTOR ID NUMBER/UPDATED TRAINING PLAN/Ger
6 8/16/13 Certified and Qualified Training Program applicable regulations, company, MSHA MSHA exam, 5. Methane and oxygen deficiency testing[ ] applicable regulations, company, gas measuring devices, MSHA, vendor/manufacturer file:///c:/users/pprieto/documentsnvork/msha INFO/MSHA TRAINING PLAN AND PAULS INTRUCTOR ID NUMBER/UPDATED TRAINING PLAN/Cer... 3/3
7 8/16/13 Hazard Training Program Part 48 Training Program Optional Training Plan Format Independent Contractors Coal Surface Mines ID #FN4 7/31/2013 6:46:41 PM Hazard Training Program Section Miners or persons who are exposed to mine hazards and are not required to take new miner or experienced miner training as specified in Section 48.22(a)(2) will receive the following training prior to commencing work on mine property. The training will be given at least once every 12 months. Experienced short-term contract workers, such as drillers or blasters, who received training under Section may receive hazard training in lieu of more experienced miner training for each new mine employment. Subjects 1. Hazard recognition and avoidance [ 48.31(a)(1)] applicable regulations, checklist(s), company, company rules and policies, MSHA 2. Emergency and evacuation procedures[ 48.31(a)(2)] applicable regulations, company, emergency and evacuation plans, MSHA, vendor/manufacturer 3. Health and safety standards, safety rules and safe working procedures[ 48.31(a)(3)] applicable regulations, company, MSHA, vendor/manufacturer 4. Self-rescue and respiratory devices[ 48.31(a)(4)] applicable regulations, company, MSHA, training devices, vendor/manufacturer fit test, file:///c:/users/pprieto/documents/work/msha INFO/MSHA TRAINING PLAN AND PAULS INTRUCTOR ID NUMBER/UPDATED TRAINING PLAN/Haz... 1/1
8 8/16/13 New Miner Training Program Part 48 Training Program Optional Training Plan Format Independent Contractors Coal Surface Mines ID# FN4 8/16/ :42:16 AM New Miner Training Program Section Each new miner will receive no less than 24 hours of training as prescribed in this section. New Miner Training Request Request that part of training be given after work assignment? No Subjects 1. Statutory rights of miners and their representatives under the Act; authority and responsibility of supervisors[ 48.25(b)(1)J audio/video, discussion, lecture 1977 Mine Act, applicable regulations, company, company rules, MSHA, First-Aid, CPR, AED For First Responder 2. Self-rescue and respiratory devices[ 48.25(b)(2)] audio/video, demonstration, discussion applicable regulations, company, MSHA, training devices, vendor/manufacturer fit test, 3. Transportation controls and communication systems[ 48.25(b)(3)J applicable regulations, company, mine communication systems, MSHA, vendor/manufacturer, warning signals/directional signs 4. Introduction to work environment[ 48.25(b)(4)] audio/video, discussion, lecture, site tour applicable regulations, company, MSHA, vendor/manufacturer file:///c:/users/pprieto/documents!work/msha INFO/MSHA TRAINING PLAN AND PAULS INTRUCTOR ID NUMBER/UPDATED TRAINING PLAN/Ne... 1/3
9 8/16/13 New Miner Training Program 5. Escape and emergency evacuation plans; firewarning and firefighting[ 48.25(b)(5)] applicable regulations, company, escape and emergency evacuation plans, firewarning signals and firefighting procedures, mine escape system, MSHA, vendor/manufacturer 6. Ground control; working in areas of highwalls, water hazards, pits and spoil banks; illumination and night work[ 48.25(b)(6)] audio/video, discussion, lecture, site tour applicable regulations, company, highwall and ground control plans, MSHA 7. Health[ 48.25(b)(7)] 1977 Mine Act, applicable regulations, company, dosimeters, dust control plan, health control plans, MSDS, MSHA, protective equipment, warning labels 8. Hazard recognition[ 48.25(b)(8)] audio/video, discussion, lecture, site tour applicable regulations, company, MSHA, vendor/manufacturer 9. Electrical hazards[ 48.25(b)(9)] audio/video, discussion, lecture applicable regulations, company, lockout devices, MSHA, vendor/manufacturer 10. First aid[ 48.25(b)(10)J applicable regulations, company, first aid supplies, MSHA, vendor/manufacturer 11. Explosives[ 48.25(b)(11 )l audio/video, discussion, lecture applicable regulations, company, MSHA, vendor/manufacturer 12. Health and safety aspects of the tasks to which the new miner will be assigned[ 48.25(b)(12)], site tour applicable regulations, company, HazCom Program, MSDS, MSHA, protective equipment, safe work procedures, vendor/manufacturer file:///c:/users/pprieto/documentsnvork/msha INFO/MSHA TRAINING PLAN AND PAULS INTRUCTOR ID NUMBER/UPDATED TRAINING PLAN/Ne
10 8/16/13 New Miner Training Program Remarks First-Aid & CPR, AED for Emergency Response file:///c:/users/pprieto/documents!work/msha INFO/MSHA TRAINING PLAN AND PAULS INTRUCTOR ID NUMBER/UPDATED TRAINING PLAN/Ne... 3/3
11 8/16/13 Optional Training Plan Format- General Information Part 48 Training Program Optional Training Plan Format Independent Contractors Coal Surface Mines 8/16/ :41:11 AM General Information 1. Company and mine names MSHAID#: Company Name: Address: Mine Name: FN4 Arnold Machinery Co 2975 West 2100 South, Salt Lake City, UT n/a 2. Person responsible for health and safety training at the mine Name: Position/Title: Phone Number: Dan Bletzacker Director: Environmental Health & Safety (801) MSHA approved instructors and courses each is qualified to teach Name(s) Paul Te Prieto MIIN M Course Code(s) IS 4. Location(s) where training will be given New Miner: Experienced Miner: Task Training: Annual Refresher Training: Hazard Training: minesite/offsite minesite/offsite minesite/offsite minesite/offsite minesite/offsite 5. Number of miners and trainees Approximate number of miners employed: Maximum number of trainees per training session: file:///c:/users/pprieto/documents/work/msha INFO/MSHA TRAINING PLAN AND PAULS INTRUCTOR ID NUMBER/UPDATED TRAINING PLAN/Opti... 1/2
12 8/16/13 Optional Training Plan Format- General Information Remarks Lock-Out, Tag-Out Hazards, Welding & Cutting Hazards, Slings/Rigging Hazard. file:///c:/users/pprieto/documents!work/msha INFO/MSHA TRAINING PLAN AND PAULS INTRUCTOR ID NUMBER/UPDATED TRAINING PLAN/Opti... 2/2
This order was adopted by the Board at its meeting on.
Notice of Final Rulemaking Department of Environmental Protection BOARD OF COAL MINE SAFETY [25 Pa. Code Ch. 208] Requirements for Automatic External Defibrillators The Board of Coal Mine Safety (Board)
Public Employee Safety and Health (PESH)
Public Employee Safety and Health (PESH) presented by Matthew Setteducati Supervising Safety & Health Inspector New York State Department of Labor Division of Safety and Health (DOSH) Public Employee Safety
HAT. Human Assets Training. Training & Consultation Services
HAT Human Assets Training We We Provide Provide The The Best Best Training & Consultation Services Overview Human Assets Training (HAT) for training and consultations established in 2011 in Al Khobar with
OSHA (PESH) Records. Presented by: Doug Miller. Occupational Safety Consultants, Inc.
OSHA (PESH) Records Presented by: Doug Miller Objectives At the end of this presentation you will know and understand: OSHA s Written Program Requirements OSHA s Training Documentation Requirements OSHA
Salt Lake Community College
Salt Lake Community College Program for the Control of Hazardous Energy (Lock-out/Tag-out) Prepared By: Environmental Heath and Safety July 2004 Intended use of this program: The purpose of this program
INFORMAL SAFETY PROGRAM FOR SMALL BUSINESS
INFORMAL SAFETY PROGRAM FOR SMALL BUSINESS Provided by; Industry Services Small Business PREFACE Due diligence means to take all reasonable care in all circumstances of the workplace to protect the health
Does this topic relate to the work the crew is doing? If not, choose another topic.
TRAINING GUIDE RESPIRATORS 1994 Before you begin the meeting... Does this topic relate to the work the crew is doing? If not, choose another topic. Did you read this Training Guide and fill in the blanks
Health, Safety, Security and Environment
Document owner and change code Document Owner Aaron Perronne Title HSSE Manager Mark X Change Code Description X N/A First Issue A Typographical/Grammatical correction; formatting change; text clarification-no
Hazard Communication. OSHA Office of Training and Education 1
Hazard Communication OSHA Office of Training and Education 1 Introduction About 32 million workers work with and are potentially exposed to one or more chemical hazards There are approximately 650,000
STANDARDIZED SAFETY TRAINING saskpolytech.ca/sst
STANDARDIZED SAFETY TRAINING saskpolytech.ca/sst SAFETY TRAINING STARTS HERE Saskatchewan Polytechnic is your source for provincial training standards. Our Standardized Contractor Safety Training courses
Sample worker orientation checklist
Employee name: Position (tasks): First day of work: Date(s) of orientation: Person providing orientation (name and position): Company name: Topic Initials (trainer) Initials (worker) Comments 1. Supervisor
Facilities Department Accident Prevention Plan
Prepared By: Facilities Management team Revision Date: 2/12/18 1.0. PURPOSE The management of Edmonds Community College is committed to preventing accidents and ensuring the safety and health of our employees.
Michigan State University Department of Chemical Engineering and Materials Science (CHEMS) SAFETY Documents
Michigan State University Department of Chemical Engineering and Materials Science (CHEMS) SAFETY Documents Contents Safety Training Requirements 2 Safety Compliance Guidelines 3 Laboratory Safety Rules
CHEMICAL HYGIENE PLAN
SAMPLE WRITTEN CHEMICAL HYGIENE PLAN For Compliance With 29 CFR 1910.1450 Wyoming General Rules and Regulations Wyoming Department of Workforce Services OSHA Division Consultation Program ACKNOWLEDGEMENTS
Outreach Training Program
Directorate of Training and Education Outreach Training Program General Industry Procedures Revised April 2011 Occupational Safety and Health Administration (OSHA) 2020 S. Arlington Heights Rd Arlington
OSHA Regulations- Credit: CNBT Required. Title of course. ies
OSHA Regulations- -Construction Industry (OSHT 1305) Credit: 3 semester credit hours (2 hour lecture, 1 hour lab) Prerequisite: Passed the writing portion of COMPASS or other accepted testing instrument,
Overview of the Province of Ontario s Underground Mine Blitzes
Overview of the Province of Ontario s Underground Mine Blitzes 2013-2014 WSN Mining Conference April 9 th, 2014 Glenn Staskus Provincial Coordinator Mining (A) Ontario Ministry of Labour Ministry of Labour
CONTRACTORS SAFETY PROCEDURES Health and Safety Procedures Overview. Safety is a high priority of the Chinook s Edge School Division No. 73.
CONTRACTORS SAFETY PROCEDURES Health and Safety Procedures Overview Safety is a high priority of the Chinook s Edge School Division No. 73. Chinook s Edge School Division No. 73 (CESD) is committed to
U.S. CONCRETE, INC. SAFETY POLICY and PROCEDURE MANUAL
- SAFE -15 Page 1 of 7 U.S. CONCRETE, INC. SAFETY POLICY and PROCEDURE MANUAL FUNCTION Safety TOPIC Lock Out / Tag Out Program OBJECTIVE(S): To provide a work atmosphere that is conducive to attaining
See footnotes at end of table.
with from work, job transfer, or with All industries including state and local government 4 43.7 23.7 12.8 10.9 20.0 Private industry 4 32.8 18.7 9.9 8.8 14.1 Goods-producing 4 9.4 6.0 3.1 3.0 3.4 Natural
First Aid/CPR Training Program Application Packet
First Aid/CPR Training Program Application Packet Submit completed application and supporting documentation to: Contra Costa Emergency Medical Services Attn: First Aid/CPR Training Program Approval 1340
EARLY SAFETY TRAINING PROGRAM A Saskatchewan Safety Council Initiative. Hosting Guidelines
EARLY SAFETY TRAINING PROGRAM A Saskatchewan Safety Council Initiative Hosting Guidelines Opportunity for Youth Opportunity for Industry Opportunity for Saskatchewan Make Safety the Right Choice Thank
Student Declaration of Understanding
Student Declaration of Understanding Workplace Safety and Insurance Board or Private Insurance Coverage for Students on Unpaid Placements Student coverage while on unpaid placement: The government of Ontario,
COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF ENVIRONMENTAL PROTECTION BUREAU OF MINE SAFETY COAL MINE RESCUE TEAM AGREEMENT
COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF ENVIRONMENTAL PROTECTION BUREAU OF MINE SAFETY COAL MINE RESCUE TEAM AGREEMENT This AGREEMENT entered into by and between the Commonwealth of Pennsylvania, Department
Incident & Hazard Reporting and Investigation Guidelines
Incident & Hazard Reporting and Investigation Guidelines Contents 1. Introduction/Background... 2 2. Scope/Purpose... 2 3. Roles and Responsibilities... 2 4. Flowchart... 3 5. Incidents... 4 5.1. Immediate
Licensed Science Officer Benchmark
POSITION EVALUATION RATIONALE POSITION TITLE of Mines and Resident Engineer () MINISTRY AND DIVISION Energy, Mines and Petroleum Resources BRANCH AND SECTION Mineral Resources Branch, Inspection and Engineering
Courses for MSHA and the Mining Industry
Courses for MSHA and the Mining Industry U.S. Department of Labor Mine Safety and Health Administration National Mine Health and Safety Academy FY 2017 Dedicated to the Health and Safety of the Nation
IGO GROUP SAFETY STANDARD 15 - ENERGY CONTROL AND ISOLATION INDEPENDENCE GROUP NL
IGO GROUP SAFETY STANDARD 15 - ENERGY CONTROL AND ISOLATION INDEPENDENCE GROUP NL CONTENTS 1. INTENT... 3 2. APPLICATION... 3 3. GENERAL REQUIREMENTS... 3 4. DETAILED GUIDANCE ON ISOLATION... 4 5. TRAINING
Health and Safety Policy and Procedures
. Health and Safety Policy and Procedures CANTERBURY COATING SPECIALISTS LTD VALID TO: 10 May 2017 Table of Contents 1. Policy Statement 4 2. Health and Safety Procedures Overview 5 Part A Our Health and
Electrical Safety and Testing Components published in Gazette Notice 1 December 2011
Provider: Date: Approved Competence Programme Provider Site Audit Checklist (Line Mechanic, Cable Jointer and persons engaged on works ) Electrical Safety and Testing Components published in Gazette Notice
No. 22 in In accordance to articles 152 & 108 / second of Labor Law no. (71) of 1987 we decided to issue the following instructions:
No. 22 in 1987 Occupational Health and Safety Instructions In accordance to articles 152 & 108 / second of Labor Law no. (71) of 1987 we decided to issue the following instructions: Article one: these
WRITTEN HAZARD COMMUNICATION PROGRAM. Prepared for: BORO OF
Prepared for: BORO OF 2013 TABLE OF CONTENTS INTRODUCTION...1 POLICY:...1 OBJECTIVE:...1 PURPOSE:...1 RESPONSIBLE PERSONS:...2 HAZARD DETERMINATION...3 PHYSICAL HAZARDS:...3 HEALTH HAZARDS:...4 EXEMPT
UC Merced Injury and Illness Prevention Program
UC Merced Injury and Illness Prevention Program www.ucmerced.edu Version 2013-1 Section Table of Contents Page 1.0 Preface... 1 2.0 Health, Safety & Environmental Policy... 2 3.0 Program Responsibilities...
Health & Safety Policy & Procedures
Health & Safety Policy & Procedures [CS 1.0] Table of Contents Table of Contents... 2 1. Policy Statement... 4 2. Health and Safety Procedures Overview... 6 Part A Our Health and Safety Procedures... 7
i. Identifying work areas, processes or tasks that require workers to wear respirators, and evaluating hazards.
St. Norbert College RESPIRATORY PROTECTION POLICY (29 CFR 1910.134) 1. INTRODUCTION - The purpose of this respiratory policy is to establish standard operating procedures to ensure the protection of all
HARBEX METAL PROCESSING LTD. Health and Safety Policy and Procedures
HARBEX METAL PROCESSING LTD Health and Safety Policy and Procedures This page is intentionally blank. Contents General Policy A declaration of our intent to provide and maintain, so far as is reasonably
Notifiable Incident Report
Page 1 of 5 Notifiable Incident Report Important This form is to be used to notify a serious event under the Work Health and Safety Act 2011 (the Act). You can access the Act at www.legislation.act.gov.au.
ADMINISTRATIVE PROCEDURE
Page 1 of 5 1. Purpose: To ensure health and safety of all employees of the Catholic District School Board of Eastern Ontario. 2. Procedures and Responsibilities 1) Site Managers Responsibilities (Principals)
Duties of a Principal
Duties of a Principal 1. Principals shall strive to model best practices in community relations, personnel management, and instructional leadership. 2. In addition to any other duties prescribed by law
Introduction to OSHA. 2-hour Lesson. Directorate of Training and Education OSHA Training Institute
Introduction to OSHA 2-hour Lesson Directorate of Training and Education OSHA Training Institute Lesson Overview Purpose: To provide workers with introductory information about OSHA Topics: 1. Why is OSHA
Appendix 1 Contractor Site Handbook
Appendix 1 Contractor Site Handbook Contractor and Visitor Site Induction Handbook 2018 Address: 421 Elizabeth Mitchell Drive Thurgoona NSW 2640 Phone: 02 60493400 ABN: 95572160729 Contact: Facilities
\ University of California, Berkeley Injury and Illness Prevention Program
\ University of California, Berkeley Injury and Illness Prevention Program Effective Date: 10-06-17 Department Name: PHYSICS Department Head: Wick Haxton Name Department Safety Coordinator: Anthony Vitan
GENERAL SKILLS CLASSES improve general construction skills used by Construction Craft Laborers on a daily basis.
GENERAL SKILLS CLASSES improve general construction skills used by Construction Craft Laborers on a daily basis. Aerial Lifts (Boom Lifts & Scissor Lifts) Aug 2 Oct 4 Nov 1 Hoisting, Rigging and Signaling
QP29.20 Revision 15 Safety
GFG Alliance Whyalla ISOLATION FOR PERSONAL PROTECTION QP29.20 Revision 15 Safety 1.0 PURPOSE Ensure isolation of energy source is carried out to prevent injury to personnel caused by: The accidental or
FIREFIGHTING EMERGENCY SUPPORT FUNCTION (ESF #4) FORMERLLY FIRE SERVICES OFFICER
NIMS Category: Operations Responsible for the coordination of firefighting, rescue and route alerting functions Reports to the emergency management coordinator DATE OF ACTIVATION: REASON FOR ACTIVATION:
GENERAL SKILLS CLASSES improve general construction skills used by Construction Craft Laborers on a daily basis.
GENERAL SKILLS CLASSES improve general construction skills used by Construction Craft Laborers on a daily basis. Aerial Lifts (Boom Lifts & Scissor Lifts) Nov 1 Dec 13 Jan 24 Feb 14 Mar 7 Mar 14 Mar 29
Central Washington University
Central Washington University General Safety Information Accident Prevention Plan Plan prepared by: Central Washington University Office of Environmental Health & Safety 400 East University Way Ellensburg,
BP U.S. Pipelines & Logistics (USPL) Safety Manual Page 1 of 7
Safety Manual Page 1 of 7 1. Purpose USPL has established a policy to comply with OSHA s Medical Services and Standard (CFR 1910.151). USPL s policy is designed to: Provide first aid supplies for treatment
P N R Associates Ltd
HEALTH AND SAFETY POLICY P N R Associates Ltd 19 Reading Road Pangbourne Berkshire RG8 7LR Tel: 0118 984 4646 Fax: 0118 984 4862 Email: info@pnr-associates.com PREPARED BY 16a Market Square, Sandy, Bedfordshire
Spring Quarter, 2014, 4 credits for ENVH 560 / 3 Credits for ENVH 460, 11 weeks
Course Syllabus ENVH 460/560 Occupational Safety Management Canvas.uw.edu Spring Quarter, 2014, 4 credits for ENVH 560 / 3 Credits for ENVH 460, 11 weeks Time: Tuesday, 10:30 1:20 pm (ENVH 460) 10:30-2:20
[Type here] RESPIRATORY PROTECTION PROGRAM
![[Type here] RESPIRATORY PROTECTION PROGRAM](/thumbs/71/65995291.jpg "[Type here] RESPIRATORY PROTECTION PROGRAM")
[Type here] RESPIRATORY PROTECTION PROGRAM 1 March 7, 2017 TABLE OF CONTENTS Section Title Page 1. Scope... 1 2. Program Administration and Responsibilities... 1 3. Immediately Dangerous to Life and Health
Administrative Safety
Administrative Safety Environmental Health and Safety Department 800 West Campbell Rd., SG10 Richardson, TX 75080-3021 Phone 972-883-2381/4111 Fax 972-883-6115 http://www.utdallas.edu/ehs Modified: March
Industrial and Environmental Health & Safety Training
Industrial and Environmental Health & Safety Training HTC Mobile Safety Trailer Classes customized to meet your requirements Did you know that lost productivity from injury and illness costs businesses
Environmental Health & Safety Course Information
Environmental Health & Safety Course Information Title Description Additional Information Aerial lift (including practical s for all aerial and man lists) EHS provides training to employees in the operations,
Health and Safety Policy and Procedures
DRD Builders Health and Safety Policy and Procedures VALID TO: 7 June 2016 Prepared on Wednesday, 5 August 2015-11:09am Page 1 of 33 Table of Contents 1. Policy Statement 3 2. Health and Safety Procedures
Working Safely in Engineering
Unit 1: Working Safely in Engineering Unit reference number: T/600/9131 QCF level: 1 Credit value: 3 Guided learning hours: 30 Unit aim This unit is designed to introduce learners to health and safety
Site Safety Plus. Site Supervision Safety Training Scheme Refresher (SSSTS-R) Course appendix D
Page 1 Site Safety Plus Site Supervision Safety Training Scheme Refresher (SSSTS-R) Course appendix D 1. Introduction... 2 2. Aims and objectives... 2 3. Entry requirements... 2 4. Assessment... 2 5. Delegate
Construction Laborers Education, Apprenticeship & Training Fund of Minnesota & North Dakota Schedule Main Street Lino Lakes, MN 55038
Construction Laborers Education, Apprenticeship & Training Fund of Minnesota & North Dakota 2019 Schedule 2350 Main Street Lino Lakes, MN 55038 Telephone: (651) 653-6710 Toll Free: (888) 758-6466 www.ltcmn.org
S.I. No. XX of 201X SAFETY, HEALTH AND WELFARE AT WORK (ONSHORE AND OFFSHORE DRILLING) REGULATIONS, 2014 ARRANGEMENT OF REGULATIONS.
S.I. No. XX of 201X SAFETY, HEALTH AND WELFARE AT WORK (ONSHORE AND OFFSHORE DRILLING) REGULATIONS, 2014 1. Citation and commencement 2. Interpretation 3. Application General Safety, Health and Welfare
POLICY. Edith Cowan University (ECU) recognises that a safe and healthy working environment is conducive to job satisfaction and productivity.
POLICY Policy Title: Work Health and Safety Policy Owner: Director Human Resources Service Centre Keywords: 1) Health 2) Safety 3) Duty of Care Policy Code: PL139 [hr081] Intent Organisational Scope Definitions
Stillwater Fire District Stillwater, New York
Stillwater Fire District Stillwater, New York Fire District Policy and Procedure Policy Number: 8 of 2010 Policy: Minimum Training Requirements Date Issued: June 16, 2010 Effective: June 16, 2010 Revised:
Center for Nano and Micro Manufacturing
Center for Nano and Micro Manufacturing Review Date: 10/2016 UC DAVIS Center for Nano and Micro Manufacturing INJURY AND ILLNESS PREVENTION PROGRAM This Injury and Illness Prevention Program has been prepared
University of California, Berkeley Facility Services Department Injury and Illness Prevention Program (IIPP)
University of California, Berkeley Facility Services Department Injury and Illness Prevention Program (IIPP) Effective Date: July 1, 2015 Department Name: Facility Services Department Head: Sally McGarrahan
Adult Family Care Home Top Ten Health Deficiency Citations Statewide October 8, 2009 Year Date Range: January 1, 2008 through December 31, 2008
Rank Tag Count Description Adult Family Care Home 1 F0401 182 Personnel records must include verification of freedom from communicable disease for the AFCH provider, each relief person, each adult household
Course Syllabus. ENVH 460/560 Occupational Safety Management. ENVH Credits ENVH Credits. Instructor: Rick Gleason, MSPH, CIH, CSP
Course Syllabus ENVH 460/560 Occupational Safety Management ENVH 460-3 Credits ENVH 560-4 Credits Instructor Name: Rick Gleason, CIH, CSP Time: Tuesdays 10:30 am - 1:20 pm Location: T-663 Spring Quarter,
NORTH CAROLINA A&T STATE UNIVERSITY Chemical Hygiene Plan
North Carolina Agricultural and Technical State University OFFICE OF ENVIRONMENTAL HEALTH & SAFETY Safety Manual Subject: Chemical Hygiene Plan Number: 5-1 Date February 1, 2009 Amends: None Supersedes:
Blasting in Nova Scotia
REGULATIONS... 2 REQUIREMENTS FOR BLASTING IN NOVA SCOTIA... 2 CATEGORIES OF BLASTERS... 3 WHAT TYPES OF BLASTING CAN FIRST, SECOND AND THIRD CLASS BLASTERS DO?... 4 SPECIALIZED BLASTING AND SPECIAL CASE
2.01 All employees of the University of Windsor shall be vigilant and shall exercise appropriate due diligence to minimize risks.
Revision No: 2 Page: 1 of 5 1.0 PURPOSE 1.01 To ensure that the University of Windsor complies with legislated health and safety requirements and to promote communication and develop procedures that improve
SafeGulf Program Agreement (Form SCO-03sg)
SafeGulf Program Agreement (Form SCO-03sg) You indicated your intent to operate the HSE RigPass accreditation program in accordance with the SafeGulf requirements. You should be aware that the following
Yosemite Community College District Biennial Inspection
Prepared by: Terrie Norris, CSP, ARM, CPSI Risk Control Manager April 2009 Table of Contents Executive Summary... 1 Critical Findings... 2 Scorecard... 3 Recommendation Summary... 4 Findings and Recommendations...
320- HAZARD COMMUNICATION
320.1 PURPOSE A. To ensure the safe use of hazardous chemicals and to comply with the requirements of OSHA 1910.1200. 320.2 SCOPE A. This program is applicable to all CNM employees who may be exposed to
UNITED CHURCH OF CHRIST LOCAL CHURCH DISASTER PREPAREDNESS AND RESPONSE PLANNING GUIDELINES
UNITED CHURCH OF CHRIST LOCAL CHURCH DISASTER PREPAREDNESS AND RESPONSE PLANNING GUIDELINES The United Church of Christ local churches may use this plan as a guide when preparing their own disaster plans
The policy and procedures described in this program apply to all MCC employees.
WORKPLACE SAFETY AND HEALTH Index No. X-32 PROCEDURES MEMORANDUM TO: FROM: SUBJECT: MCC Staff Office of the President MCC Safety and Health Program DATE: August 10, 2018 PURPOSE: SCOPE: The College is
Implementation Date: JANUARY. Annual Review Date: January 1, 2016/dh Annual Review Date: January 1, 2017/dh Annual Review Date:
UC DAVIS HEALTH SCHOOLS OF HEALTH EDUCATION & RESEARCH Implementation Date: JANUARY Annual Review Date: January 1, 2016/dh Annual Review Date: January 1, 2017/dh Annual Review Date: SCHOOLS OF HEALTH EDUCATION
Review Date: Scope: All CHL Employees and Contractors Originated: 5/15/2017 References: OSHA Revisions:
Community Healthlink Policy and Procedure Manual Section: 11 Facilities and Equipment Policy Number: 11-14 Effective Date: 5/15/17 Title: Hazard Communication Program Review Date: Scope: All CHL Employees
ADMINISTRATIVE PRACTICE LETTER TABLE OF CONTENTS
Page(s) 1 of 12 TABLE OF CONTENTS I. General II. Responsibilities a. Chancellor b. University Presidents c. Vice Presidents, Provosts, Deans d. Chairs and Directors e. Faculty and Instructors f. Supervisors
Panhandle Area Educational Consortium Safe Schools Planning
Panhandle Area Educational Consortium Safe Schools Planning SAFETY - SECURITY & HEALTH ASSESSMENT School District Date 1. OSH Management Evaluations Has an OSH Management Evaluation of the schools been
Policy. Health and Safety Welfare
Health & Safety Welfare Policy Policy Title Health and Safety Welfare Policy Created / Amended September 2017 Policy Ratified September 2017 Policy review cycle 1 year Policy Review Date September 2018
Statement of General Policy 2. Organisation Responsibilities 3
The Blackpool Sixth Form College HEALTH AND SAFETY POLICY CONTENTS Statement of General Policy 2 Organisation Responsibilities 3 Arrangements Section 1: Health and Safety Risks arising from College activities
PROCEDURE 806 HEALTH AND SAFETY
PROCEDURE 806 HEALTH AND SAFETY I. Administration For the purpose of implementing Policy 806 Health and Safety, the District has assigned the following responsibilities: A. Employees Employees will: 1.
Safety. 3.1 The Law Affecting Health and Safety in the UK UK Health and Safety at Work Act (HASWA) Statutory Duties of the Employer
3 Legislation Related to Health and Safety 3.1 The Law Affecting Health and Safety in the UK 3.1.1 UK Health and Safety at Work Act (HASWA) 1974 The 1974 HASWA defines the statutory duties UK employers
NAVSEA STANDARD ITEM CFR Part 61, National Emission Standards for Hazardous Air Pollutants
NAVSEA STANDARD ITEM ITEM NO: 009-01 DATE: 18 JUL 2014 CATEGORY: I 1. SCOPE: 1.1 Title: General Criteria; accomplish 2. REFERENCES: 2.1 40 CFR Part 61, National Emission Standards for Hazardous Air Pollutants
HAZARDOUS MATERIALS EMERGENCY. Awareness Level Response Plan 29 CFR (q) and 40 CFR 311
HAZARDOUS MATERIALS EMERGENCY Awareness Level Response Plan 29 CFR 1910.120 (q) and 40 CFR 311 This plan addresses health and safety protection for the Med-Care Ambulance Service Prepared By: Chris Moretto
Summary of Learning Outcomes Level 2 Award in Health and Safety in the Workplace Qualification Number: 500/5439/9 1
Summary of Learning Outcomes Level 2 Award in Health and Safety in the Workplace Qualification Number: 500/5439/9 1 Contents Contents... 2 SUMMARY OF LEARNING OUTCOMES FOR LEVEL 2 AWARD IN HEALTH AND SAFETY
RISK ASSESSMENT POLICY Independent School Standards Regulations 2014, Part 3 16(a) December 2015
DANESMEAD, FULFORD CROSS, YORK YO10 4PB TEL: (01904) 654983 RISK ASSESSMENT POLICY Independent School Standards Regulations 2014, Part 3 16(a) December 2015 Introduction The school s management and Trustees
A World Class Leader in Training and Development. Safety Training. Safety Training. Global Learning Services
Page 1 Content A World Class Leader in Training and Development 1. General Health & Safety Page 3 2. Advanced Health & Safety Page 4 3. Health & Safety Representative Page 5 4. Incident Accident Investigation
Louisiana State University
Revision: 3 Effective Date: December 1, 2010 Page 1 of 9 Louisiana State University Office of Facility Services Operating Instruction 4006 SUBJECT: RESPIRATOR PROTECTION PROGRAM I. General A. In compliance
Hazardous Materials Awareness & Ops
Western Technical College 10503153 Hazardous Materials Awareness & Ops Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 1.00 Total Hours 27.00 This
WARTBURG COLLEGE ENVIRONMENTAL AND OCCUPATIONAL SAFETY PROGRAM. Hazardous Chemical Communication Plan (Worker Right To Know)
February 1, 2001 WARTBURG COLLEGE ENVIRONMENTAL AND OCCUPATIONAL SAFETY PROGRAM Hazardous Chemical Communication Plan (Worker Right To Know) Introduction..1 Responsibilities 1 References 2 Material Safety
Emergency Operations Plan
Emergency Operations Plan Twin Valley Community Local School District 100 Education Drive District Office West Alexandria, Ohio 45381 (937) 839-4688 Twin Valley Community Local School Emergency Operations
PPLHSL4 Maintain the health, hygiene, safety and security of the working environment
Maintain the health, hygiene, safety and security of the working Overview This unit is about maintaining health, safety, security and hygiene standards relevant to your area of responsibility. The maintenance
Entomology and Nematology
Entomology and Nematology UC DAVIS Entomology and Nematology INJURY AND ILLNESS PREVENTION PROGRAM This Injury and Illness Prevention Program has been prepared by the University of California, Entomology
MARIN MUNICIPAL WATER DISTRICT
MARIN MUNICIPAL WATER DISTRICT DEFINITION Under general supervision, participates and provides direction to Park Rangers in the work of watershed operations which include but are not limited to: watershed
Training Course Descriptions
Course Descriptions Risk Management, Environmental Health & Safety Smith Hall 103 Mt. Pleasant, MI 48859 (989) 774-7398 www.cmich.edu/cmuehs March 2017 Risk Management, Environmental Health & Safety Course
Toronto, Ontario, Canada
Toronto, Ontario, Canada SCHOOL: DEPARTMENT: School of Engineering Technology and Applied Science Applied Biological and Environmental Science Mechanical and Automation Engineering Technology Electronics,
HEALTH AND SAFETY POLICY
HEALTH AND SAFETY POLICY Ratified by Governors/Principal: Resources, Finance and Employment Committee (REF) Current ratification date: Spring 2015 Review frequency: Two years Next review date: Spring 2017
New Hire Safety Orientation Safety Through Involvement
V18-3/31/10 New Hire Safety Orientation Safety Through Involvement Presented by Safety Operations Oh No! Not another boring Safety Class The World of Safety according to Steve Unsafe Acts Communication
Feilding Church Health & Safety Plan
Feilding Church Health & Safety Plan 2017 Version 2 Contents Introduction... 1 Health and Safety Plan Objective... 1 Plan Review... 1 Church Profile... 1 Health and Safety Commitment Statement... 2 Health
Safety Information Book. For. Academic and Administrative Units
For Academic and Administrative Units Department: Prepared by: Date prepared: Approval signature of unit head: Approval date: Revision date(s): Revision 1. 3/17/94. Revision 2. 3/19/95. Revision 3. 11-3-2003
CHABOT/LAS POSITAS COMMUNITY COLLEGE DISTRICT
CHABOT/LAS POSITAS COMMUNITY COLLEGE DISTRICT HAZARD COMMUNICATION PLAN Chabot/Las Positas Community College District Hazard Communication Program 2/2007 Pg 1 of 7 Hazard Communication Program Policy Policy