Course 2A Pump Reliability Application & Installation Instructor: Eugene Vogel, Pump & Vibration Specialist, EASA, Inc.

Transcription

1 Tuesday, July 17, :00 to 8:00 a.m. Breakfast 8 a.m. to Noon Morning Pre-Conference Workshops Course 1A Rotor Dynamics with Rolling Element Bearings Instructor: Robert (Bob) Sayer, P.E., President, Vibration Institute & Owner Applied Structural Dynamics Course 2A Pump Reliability Application & Installation Instructor: Eugene Vogel, Pump & Vibration Specialist, EASA, Inc. Asset Condition Management Training Symposium 9 a.m. - Noon Asset Condition Management Course Speaker: Dave Reiber Certified Reliability Leader Workshop Speaker: Terrence O Hanlon 12:00 to 1:00 p.m. Sponsored Lunch on the Exhibit Floor 1:00 to 5:00 p.m. Course 1B Rotordynamics of Rotors using Hydrodynamic Bearings Instructor: Ray D. Kelm, P.E., President, Kelm Engineering & Malcolm E. Leader, P.E., Owner Applied Machinery Dynamics Company 5:00 to 7:00 p.m. Sponsored Opening Reception on the Exhibit Floor Course 2B Centrifugal Pump Repair - An Opportunity for Improvement Instructor: Robert Jennings, Corporate Trainer, Hydro, Inc. Asset Condition Management Course Speaker: Dave Reiber Certified Reliability Leader Workshop Speaker: Terrence O Hanlon

2 Wednesday, July 18, :00 a.m. Breakfast 8:00 9:15 a.m. Opening General Session and Keynote Presentation Keynote: Why and How Condition Monitoring Professionals Need to Embrace The IOT, Security, and Artificial Intelligence Speaker: Dale Maloney, Systems Engineer, Honda America Mfg., Inc. 9:15 9:30 a.m. Transition 9:30 10:30 a.m. Extended morning break on the exhibit floor to visit vendors Track 4 10:30 a.m. Noon Track 1 Track 2 Track 3 Balancing Workshop Part 1 Application of Phase Angle Measurements for Balancing Speakers: Tom Spettel, Senior Engineer, HECO PSG & Adam Smith, Senior Reliability Specialist, HECO PSG Vibration Testing and Analysis of Pumps Speakers: William D. Marscher, P.E., President & Technical Director, Mechanical Solutions, Inc., & Maki M. Onari, Pump & Turbomachinery Testing Manager, Mechanical Solutions, Inc. Development of a Multi- Technology Monitoring Program Speaker: Andy Page, Ph.D., Director, Business Process Excellence, Allied Reliability Group 9:30 a.m. 12:00 p.m. Asset Conditioning Management Symposium 2018: Artificial Intelligence & Internet of Things for Condition Monitoring - Technology Showcase Session, Sponsored by: Reliablityweb.com Session Moderators: Terry O Hanlon CEO, Reliabilitywev.com & Dave Reiber, Senior Reliability Leader

3 12:00 1:00 p.m. Sponsored Lunch on the Exhibit Floor 1:00 3:00 p.m. Track 1 Track 2 Track 3 ACMTS 1:00 2:00 p.m. Motion Amplification: A New Way to Visualize Vibrations (Includes a live demonstration) Speaker: Jeff Hay, Ph.D., Founder and CEO, RDI Technologies, Inc. 1:00 2:00 p.m. Vane-Pass Resonance, Analysis & Resolution on a 3000 HP BB1 Fan Pump Using Modal/ODS & FEA Speaker: Monroe Voyles, Solutions Engineer, ITT Goulds Pumps How to Design, Implement and Maintain a Powerful Oil Analysis Program Speaker: Alejandro Meza, Senior Technical Consultant, Noria Corporation 2:00 2:30 p.m. Wireless Condition Monitoring A Survey of Wireless Vendors Features and Performance Speaker: Ed Spence, CBM Senior Development Consultant, The Machine Instrumentation Group 2:30 3:00 p.m. Photonic Vibration Sensor Speaker: Atul Pradhan, Ph.D., Chief Technology Officer, Micatu, Inc. 2:00 3:00 p.m. Practical Implementation of Advanced Torsional Vibration Analysis Speaker: Malcolm Leader, P.E., Owner, Applied Machinery Dynamics 3:00 3:30 p.m. Afternoon Networking Break on the Exhibit Floor 3:30 5:00 p.m. Track 1 Track 2 Track 3 3:30 5:00 p.m. Balancing Workshop Part II Field Balancing of Rotors Speakers: Tom Spettel, Senior Engineer, HECO PSG & Adam Smith, Senior Reliability Specialist, HECO PSG 3:30 4:30 p.m. Introduction to Fixed Equipment Vibration Part 1: FIV and Random Response Speaker: Gyorgy Szasz, Ph.D., Stress Engineering Services, Inc. 3:30 4:30 p.m. New Shaft Alignment Standard Explained Speaker: Eugene Vogel, Pump & Vibration Specialist, EASA, Inc. 4:30 5:00 p.m. Understanding Non-Linear Signals Speaker: Ronald L. Eshleman, Ph.D., Founder, Technical Director of Training, Vibration Institute 5:00 7:00 p.m. Sponsored Closing Reception on the Exhibit Floor Passport drawing 6:45 p.m. (must be present to win) 4:30 5:00 p.m. Acceptance Testing of Rotordynamic Pumps Aligning Industry Practice with American National Standards Per ANSI/HI Speaker: Peter Gaydon, Director of Technical Affairs, Hydraulic Institute Asset Condition Management Course Speaker: Dave Reiber Certified Reliability Leader Workshop Speaker: Terrence O Hanlon

4 Thursday, July 19, :00 8:00 a.m. Breakfast 8:00 9:00 a.m. Focus Session: Facing the Challenge Engineering Overview of the New Orleans PCCP Monster Pumps Speaker: Jack Claxton, P.E., Vice President, Engineering, Patterson Pump Company 9:15 10:00 a.m. Track 1 Track 2 Track 3 ACMTS 9 a.m. 2:30 p.m. Communication and accountability are the keys to Success in Condition-Based Maintenance Speaker: Forrest Pardue, President/Owner 24/7 Systems 10:00 10:30 a.m. Networking Break Torsional Damping Benefits for Reciprocating Compressors Speaker: Thomas J. Stephens, P.E., Engineer, Ariel Corporation Dynamics of Pumping Machinery Proper Upfront Analysis Limits Vibration Problems in the Field Per ANSI/HI Speaker: Peter Gaydon, Director of Technical Affairs, Hydraulic Institute 10:30 a.m. Noon Track 1 Track 2 Academic Track 10:30 11:30 a.m. Static Couple Balancing within the Power Industry 10:30 11:30 a.m. Introduction to Fixed Equipment Vibration Part 2: Piping Vibration Forensic Evaluation of a Mezzanine Failure Speaker: Tom Lantrip, Principle Speaker: Gyorgy Szasz, Ph.D., Staff An Application of a Engineer, Southern Company Consultant, Stress Engineering Tuned Vibration Services Absorber with Finite Elements Asset Condition Management Course Speaker: Dave Reiber Certified Reliability Leader Workshop Speaker: Terrence O Hanlon 11:30 a.m. 12:00 p.m. Industrial IEPE Accelerometer that Uses Bias Voltage to Measure and Compensate for Temperature Speaker: George Zusman, Ph.D., D.Sc., Owner, Vibration Measurement Solution, Inc. 12:00 1:00 p.m. Sponsored Lunch 11:30 a.m. 12:00 p.m. Torsional Vibrations of Reciprocating Compressors Speaker: Aly El-Shafei, Ph.D., Managing Director, RITEC, Egypt Setting Up a Tool Conditioning Monitoring Lab at a University 1:00 3:00 p.m. Track 1 Track 2 Academic Track Stiffness & Machine Vibration Speaker: Barry T. Cease, Owner, Cease Industrial Consulting 1:00 2:00 p.m. Rotor Stability Test with Various Five Pad Tilting Pad Bearings Speaker: Edgar J. Gunter, Ph.D., Professor Emeritus, University of Virginia 2:00 2:30 p.m. Steam Turbine Reliability Improvement and Optimization Speaker: Allan McNally, Owner, McNally, LLC 2:30 3:00 p.m. Are New MEMS Accelerometers Really Game Changers? A Comparison of Accelerometer Technologies Performance and Features Speaker: Ed Spence, CMB Senior Consultant, The Machine Instrumentation Group & Renard Klubnik, Senior Application Engineer, Wilcoxon Sensing Technologies A Parametric Analysis of Structural Integrity of Pressure Vessel Installed in Open Air Static Measurements of Used Golf Balls Acoustic Effects Demonstrator Design Strain Dependence of Inherent Damping in 3D Printed INCONEL 718 Exam 3 5 p.m. The Association of Asset Management Professionals (AMP) has developed an exam based on the holistic system of Uptime Elements and the CRL Body of Knowledge (BoK). The proctored exam consists of 125 multiple choice questions within a two-hour timeframe. The cost for the exam is $299 USD. You will be able to register for the exam during the registration process for this event.

5 3:00 3:30 p.m. Networking Break 3:30 5:00 p.m. Track 1 Track 2 Track 3 Balance Machine Review and Applying Balancing Tolerances Speaker: Pete Ehlers, Director of Sales & Marketing, Schenck Trebel Corporation Gas Turbine & Generator Case Study Speakers: Timothy S. Irwin, Engineering Manager, MHPS-AMER & E. Peyton Swan, P.E., Machinery Diagnostics Services Manager, Bruel & Kjaer Vibro American Electrical and Current Signature Analysis of Electric Motors & Machines and Correlation with Vibration and Motion Amplification Speaker: Howard W. Penrose, Ph.D., President, MotordDoc LLC 7:00 8:00 a.m. Breakfast 8:00 10:00 a.m. Vibration Institute Annual Meeting Friday, July 20, 2018 Focus Session: SEMAJIB: A Versatile High Performance Smart Bearing Speaker: Aly El-Shafai, Ph.D., Managing Director, RITEC, Egypt Focus Session: An Intermittent Abnormal Vibration of a Large Steam Turbine Speaker: Mamdouh B. Al-Aidarous, P.E., Engineering Consultant, Saudi Aramco Includes: Vibration Institute Annual Meeting and Jack Frarey Award 10:00 10:30 a.m. Networking Break 10:30 a.m. Noon Focus Session: Lessons learned in 35 years of Troubleshooting Vibration Problems Speaker: Nelson L. Baxter, P.E., President, ABM Technical Services, Inc. Closing Remarks - Bob Sayer 12:00 1:00 p.m. Lunch for Post-Conference Short Course Participants 1:00 5:00 p.m. Post-Conference Short Course Roadmap to Effective Vibration Diagnostics Instructor: Robert Sayer, P.E., President Vibration Institute & Owner, Applied Structural Dynamics