JRC / Alphatron Marine Product Training Courses

Transcription

1 JRC / Alphatron Marine Product Courses Introduction JRC / Alphatron is able to supply different types of technical training for service engineers. We can also provide ECDIS Train the Trainer trainings and ECDIS type specific training.all technical trainings are held in JRC / Aphatron Marine. ECDIS type specific training might take place on board or in JRC / Alphatron Marine training centre at 100 Pasir Panjang. In this document you will find the details of our training arrangements. Office and contact details Our office address is : Alphatron Marine Systems Pte Ltd 100 Pasir Panjang Road #05-01 Singapore Contact details : Telephone : training department support JRC products : training@alphatronmarinesystems.com : technical@alphatronmarinesystems.com Hotel arrangements At this moment we have an arrangement with Park Hotel Alexandra and Armara Hotel. If you would like to have hotel reservation, we are pleased to make the reservation for you. Please note that the trainee or the company employing the trainee is responsible for the hotel bill settlement when checking out. JRC / Alphatron Marine only assist in hotel reservation. 1-7

2 rules and requirements The engineer must have at least one year of field experience on the equipment in general (either JRC or other brands) and understand the electronic fundamentals of the type of equipment. If, during training, a lack of general experience/knowledge on the equipment is ascertained, the trainer may decide not to issue a certificate. The cost of the training will not be reimbursed. For ECDIS, VDR and Fleet Broadband training we require that the trainee has basic knowledge of windows operating system, computer architecture, networking and standard NMEA For Radar training we expect the trainee to have basic knowledge of radar systems. For training of Sonar equipment we expect the trainee to have basic knowledge of underwater acoustics. For GMDSS training we expect the trainee to have basic understanding of super heterodyne transceivers and do recommend certificate for GMDSS equipment. For AlphaMidiCourse and AlphaMiniCourse we expect the trainee to have basic knowledge of gyro principles. We expect that the trainees arrive in time for the training and notify us by telephone whenever they are not able to arrive in time for the training. In order to receive a certificate, trainees have to follow the complete course. If any part of the training is not completed then we can not issue certificate. normally starts at 09:00 and finishes not later than 17:00. There will be adequate breaks during the day. After finishing training for specific equipment a questionnaire will be handed out. This has to be completed by the trainee. In order to receive a certificate the trainee must score 70%. The trainee is allowed to use all the documents provided on the course when completing the questionnaire. Mobile telephones have to be switched off during training. Emergency use of mobile telephones is discussable. We expect trainees to pay attention to the training and do not use the Internet for web browsing during training. 2-7

3 What do the trainees have to bring During the training we will hand out training documents in PDF format. Trainees have to bring the laptop which they use for service. This is to make sure that the laptop they use is suitable for connecting to our equipment. Software required for opening standard industrial formats files should be installed on the laptop (e.g. VLC LAN, Word, Excel, Adobe reader, Winzip or Winrar, Google Chrome, Mozilla Firefox and Internet Explorer updated to latest versions). It is preferable to carry commonly used cables e.g. straight serial cable (5m), crossed serial cable (5m) and straight CAT-5 cable (5m). However if not available we can supply a limited amount of cables during the training. Also recommendable is to bring USB to serial converter if the laptop does not have a serial port. Please also check if the laptop is able to read/write CF cards and/or PCMCIA cards. If not please bring an external reader. This is especially important for Radar and (S)-VDR training (JCY-1700(S)/1800/1850, 1900/1950). 3-7

4 Which training can we provide? We can provide the following training: Installation, operation and maintenance of RADAR JMA-1030, JMR-72xx/92xx ECDIS JAN-7201/9201 CONNING DISPLAY/BAMS JAN-7202/9202 ROUTE PLANNING JAN-5203 (S)-VDR JCY-1900/1950 DOPPLER LOG JLN-205(MKII)/JLN-740/741 SATELLITE SPEEDLOG JLN-720* ECHOSOUNDER JFE-380/680/JFC-7050/180BB/800/810 CURRENT METER JLN-650/652/628 FLEETBROADBAND JUE-251/501 GLOBAL EXPRESS JUE-60GX* INMARSAT-C JUE-87 MFHF JSS-2250(N)/2500(N) VHF JHS-800S/780D AIS JHS-183 BNWAS JCX-161 (D)GPS JLR-8400/8600 GPS COMPASS JLR-21/31 SONAR JFP-180, JFP-185, JFS-280 *Only when we have the equipment. Operation and maintenance of RADAR CHARTRADAR ECDIS CONNING DISPLAY ROUTE PLANNING (S)-VDR FLEETBROADBAND INMARSAT-C MFHF AIS BNWAS GPS COMPASS SONAR JMA-71xx/91xx/53xxMKII/52xxMKII JMA-9xxB JAN-701B/901B/2000(MKII) JAN-701B-CON/901B-CON/2000-CON JAN-1186 JCY-1700(S), JCY-1800/1850 JUE-250/500 JUE-85 JSS-296/596/896 JHS-182 JCX-151/152 JLR-20/30 JFP

5 Type Specific/ Trainer ECDIS Train the Trainer training Type Specific Train the Trainer training ( B) Type Specific ( C1 standard classroom training) Type Specific ( C1 upgrade) Type specific training ( C2 on-board) JAN-701B/901B/2000 JAN-701B/901B/

6 composition and duration JRC products Duration Practice Required Maximum of 6 attendees of all technical courses. 1B 2B 3B 4B ECDIS, JAN-9201/7201 CONNING, JAN-9202/7202 RADAR, JMR-9200/7200 Series AlphaCAM (S)VDR, JCY-1700/1700S + APT (S)VDR, JCY-1800/ APT (S)VDR, JCY-1900/ APT RADAR, JMR-5400 Series ECDIS, JAN-901B/701B/2000 FBB, JUE-501/251 SDME, JLN-740/741 Alphaline Repeaters RADAR, JMA-9100/7100 Series Color Plotter, JLZ-1000 Alphaminicourse Scanning SONAR, JFS-280 SDME, JLN days Yes Theory of radar operation Laptop. Basic knowledge of computer architecture. Basic knowledge of windows XP. Basic understanding of networking. 5 days Yes Theory of radar operation Laptop. Basic knowledge of computer architecture. Basic knowledge of windows XP. Basic understanding of networking. 5 days Yes Laptop. Basic knowledge of computer architecture. Basic knowledge of windows XP. Basic understanding of networking. 5 days Yes Laptop used for APT/installation (S)-VDR. Straight LAN cable. 6-7

7 Certificates when changing jobs. The validity of training certificates: when an employee (mostly technicians) goes to a new employer in the same maritime service business, his JRC / Alphatron Marine certificates will become invalid. However, when the ex-employer (JRC / Alphatron Marine agent) agrees, in a written statement, to re-issue the certificates, it is possible to apply for new certificates.please note that this is only if both employers are active in the APAC region and that a fee may apply. The training department will provide you with the price and documents needed for re-issuing. Application for technical training It is only possible to apply for training with the application form we will provide. After reception of your application form, we will inform you if there is availability or if the engineer will be placed on a waiting list. Maximum amount of attendees for the technical training is 6. We have the right to cancel training 3 weeks before the training will starts, when there are not enough attendees. JRC / Alphatron Marine will inform you 5 weeks ahead if the amount of attendees. is not sufficient.. Terms of agreement The course registration is binding. This means that upon registration a payment obligation occurs to Alphatron Marine Systems Pte Ltd. Participants can unregister from the course up until 30 days prior to course starts. Cancellation from 30 till 14 days prior course start, 50% of the course fee will be charged. If cancellations is made within 14 days before the course starts, the course will be fully charged. Invoice will be sent after the end of the course. Alphatron Marine Systems Pte Ltd reserves the right to cancel, move or change course dates before the course starts. The participant will receive confirmation of participation successful or not upon registration. If you have not receive any confirmation on the training registration, please verify to training@alphatronmarinesystems.com. Alphatron Marine Systems Pte Ltd s General Terms & Conditions, a copy of which is available on our website, shall apply and be deemed to be incorporated by reference into: (i) all of our quotations, offers, agreements, invoices and purchase orders; and (ii) our services, deliveries and business transactions. All quotations, offers, agreements, invoices and purchase orders, services, deliveries and business transactions shall be subject to the terms set out in these General Terms & Conditions. A copy of these General Terms & Conditions will also be provided upon request. 7-7