Silver Plus. Manual Guns. Airless. Features and Benefits. Typical Applications. Typical Fluids Handled

Transcription

1 Silver Plus Manual Guns Features and Benefits Shaped handle reduces fatigue and increases comfort No adjustment needle makes for quick and easy repairs Patented needle design increases life Typical Applications Rail car manufacturing Ship and barge construction Bridge, tank, and water tower painting Farm and construction machinery manufacturing Industrial metal structures fabrication Typical Fluids Handled High solids epoxy primers and coatings Coal tar epoxy primers High solids polyurethane coatings Tank and pipe coatings and linings Architectural latex emulsion paints Reverse-A-Clean tip design to reduce downtime caused by frequent tip plugging SST wetted parts for material compatibility 5000 psi (345 bar, 34.5 MPa) fluid rating for spraying the toughest materials Silver Plus

2 FINISHING EQUIPMENT APPLICATORS Technical Specifications Max. working fluid pressure psi (345 bar, 34.5 MPa) Weight without tip or guard oz. (510 g) Fluid orifice All models, except in. (2.3 mm) in. (0.94 mm) Fluid inlet /4 npsm(m) Maximum material temperature F (50 C) Sound pressure level* dba Sound power level* dba Wetted parts stainless steel, polyethylene, polyurethane, nylon, Teflon Instruction manual * Measured while spraying waterborne paint gravity 1.36 through a 517 tip at 3000 psi (207 bar, 20.7 MPa) per ISO Teflon is a registered trademark of Du Pont. Ordering Information Silver Plus with NanaTite Tip Guard and 517 RAC 5 SwitchTip, 2-Finger Trigger Silver Plus with HD Guard Tip Includes GND SwitchTip, 2-Finger Trigger Silver Plus with HD Guard Tip Includes GND SwitchTip, 4-Finger Trigger Silver Plus with DripLess Flat Tip Guard, 2-Finger Trigger Spray tip not included, order separately Silver Plus with HD Tip Guard, 2-Finger Trigger with 4-Finger Fluid Tube for improved gloved hand access Silver Plus with DripLess Flat Tip Guard, 4-Finger Trigger. Spray tip not included, order separately Silver Plus with DripLess Flat Tip Guard, in. (0.94 mm) pre-orifice for fine finish. Spray tip not included, order separately Silver Plus Gun Repair Kit

3 APPLICATORS FINISHING EQUIPMENT Tip Selection Chart Size (300 mm) Flow Rate* SwitchTip Tip Tip Tip Tip Flat Tip RAC (50-100) (0.178) 6-8 ( ) (0.20) GHD (50-100) (0.203) 4-6 ( ) (0.26) ( ) (50-100) GHD (0.229) 4-6 ( ) (0.33) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD (50-100) (0.254) 4-6 ( ) (0.41) FF ( ) FF ( ) FF ( ) FF ( ) (50-100) GHD (0.279) 4-6 ( ) (0.49) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) FF5212 (0.305) 6-8 ( ) (0.59) FF ( ) FF ( ) FF ( ) FF ( ) (50-100) GHD (0.330) 4-6 ( ) (0.69) GHD213 LL ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) FF5214 (0.356) 6-8 ( ) (0.79) ( ) FF ( ) FF ( ) FF ( ) ( ) ( )

4 FINISHING EQUIPMENT APPLICATORS (50-100) GHD (0.381) 4-6 ( ) (0.91) GHD215 LL ( ) GHD315 LL ( ) GHD415 LL ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) (50-100) 0.31 GHD (0.432) 4-6 ( ) (1.17) GHD217 LL ( ) GHD317 LL ( ) GHD417 LL ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) (0.457) 6-8 ( ) (1.32) ( ) ( ) ( ) ( ) ( ) ( ) (50-100) GHD (0.483) 4-6 ( ) (1.47) GHD219 LL ( ) GHD319 LL ( ) GHD419 LL ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) ( ) (0.508) 8-10 ( ) (1.63) ( ) ( ) ( ) (50-100) GHD (0.533) 4-6 ( ) (1.79) GHD ( ) GHD321 LL ( ) GHD421 LL ( ) GHD ( ) GHD621 LL ( ) GHD ( ) GHD ( )

5 APPLICATORS FINISHING EQUIPMENT ( ) (0.559) ( ) (1.97) ( ) ( ) ( ) ( ) (0.584) 6-8 ( ) (2.15) GHD323 LL ( ) GHD423 LL ( ) GHD ( ) GHD623 LL ( ) GHD ( ) GHD ( ) GHD ( ) (0.610) 6-8 ( ) (2.35) ( ) ( ) ( ) ( ) ( ) ( ) GHD225 LL (0.635) 6-8 ( ) (2.54) GHD325 LL ( ) GHD425 LL ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) ( ) (0.660) ( ) (2.76) ( ) ( ) ( ) ( ) 0.78 GHD (0.686) 6-8 ( ) (2.96) GHD327 LL ( ) GHD427 LL ( ) GHD ( ) GHD627 LL ( ) GHD ( ) GHD ( ) GHD ( ) (0.711) ( ) (2.76) ( ) ( )

6 FINISHING EQUIPMENT APPLICATORS ( ) (0.737) 6-8 ( ) (3.42) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) ( ) (0.762) ( ) (3.67) ( ) 1.03 GHD (0.787) 6-8 ( ) (3.90) GHD331 LL ( ) GHD431 LL ( ) GHD ( ) GHD631 LL ( ) GHD ( ) GHD ( ) GHD ( ) (0.813) 8-10 ( ) (4.16) ( ) ( ) 1.17 GHD333 (0.828) 8-10 ( ) (4.42) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) 1.31 GHD235 LL (0.889) 6-8 ( ) (4.98) GHD335 LL ( ) GHD435 LL ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) 1.47 GHD337 (0.940) 8-10 ( ) (5.56) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) 1.63 GHD (0.991) 6-8 ( ) (6.18) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD

7 APPLICATORS FINISHING EQUIPMENT ( ) 1.80 GHD341 LL (1.041) 8-10 ( ) (6.83) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) 1.99 GHD343 (1.092) 8-10 ( ) (7.51) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) ( ) 2.17 GHD345 LL5345 (1.143) 8-10 ( ) (8.21) GHD ( ) GHD ( ) GHD ( ) ( ) 2.37 GHD347 (1.194) 8-10 ( ) (8.98) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) 2.58 GHD349 LL5349 (1.245) 8-10 ( ) (9.75) GHD ( ) GHD ( ) GHD ( ) GHD ( ) ( ) 2.79 GHD351 LL (1.295) 8-10 ( ) (10.6) GHD ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) 3.01 GHD (1.346) ( ) (11.41) GHD ( ) 3.21 GHD355 LL5355 (1.397) 8-10 ( ) (12.29) GHD455 LL ( ) GHD ( ) GHD ( ) GHD ( ) GHD ( ) (1.448) 8-10 ( ) (13.2) ( ) GHD ( ) GHD ( )

8 FINISHING EQUIPMENT APPLICATORS ( ) (1.499) 8-10 ( ) (14.14) ( ) GHD ( ) GHD ( ) ( ) 3.99 GHD (1.549) ( ) (15.12) GHD ( ) GHD ( ) GHD ( ) GHD ( ) 4.26 GHD (1.600) ( ) (16.13) GHD ( ) GHD ( ) GHD ( ) GHD ( ) 4.53 GHD (1.651) ( ) (17.17) GHD ( ) GHD ( ) ( ) ( ) 4.82 GHD (1.702) ( ) (18.24) GHD ( ) GHD ( ) GHD ( ) GHD ( ) (1.753) ( ) (19.36) ( ) GHD ( ) 5.41 GHD (1.803) ( ) (20.48) GHD ( ) GHD ( ) GHD ( ) ( ) (1.854) ( ) (21.57) ( ) 6.04 GHD (1.905) ( ) (22.85) GHD ( ) GHD ( ) (1.956) (24.22) ( ) (2.006) (25.36) ( ) 7.04 GHD (2.057) (26.66)

9 APPLICATORS FINISHING EQUIPMENT Accessories Filters Maximum working pressure: 3000 psi (210 bar, 21.0 MPa). Adequate filtering is important for a good surface finish and to minimize tip clogging. These filters provide secondary filtering. Various screen meshes are available. Filters that mount in hose: Includes filter body, spring and one 100 mesh screen Includes assembly plus a 3 ft. (0.9 m) whip hose for more flexible gun movement Includes filter spring and one 60 mesh screen. Use with filter body Includes filter spring and one 100 mesh screen. Use with filter body. Filters that mount between hose and gun: Includes swivel, adapter, and one 100 mesh screen. Replacement screens for above filters: Three 60 mesh (250 micron) screens Three 100 mesh (149 micron) screens Three 200 mesh (74 micron) screens. Gun Hose Swivels and Whip Hose Swivels and whip hoses provide more flexible gun movement for easier handling and less fatigue. Working pressures are listed in the descriptions. Nylon Brushes Use to thoroughly clean the gun s fluid passages in. (9 mm) diameter in. (16 mm) diameter. Tools Wrench Fits all hexes on the gun Needle Tool Required to install new needle without damaging it. Tip Guards These tip guards fit all Graco airless spray guns. Choose the one that is right for your application. One of these tip guards is included with every Graco airless gun. Use the chart on the inside pages of this data sheet as a Tip Selection Guide HandTite Tip Guard Use with RAC II or RAC 5 SwitchTips Standard DripLess Tip Guard Use with Contractor or Silver Flat Tips Heavy-Duty RAC DripLess Tip Guard Use with Heavy-Duty SwitchTip Gun Hose Swivel 1/4 npsm(f) x 1/4 npt(m). Max. working pressure: 3000 psi (210 bar, 21.0 MPa) Hose Swivel 1/2 npsm(f) x 3/8 npt(f). Max. working pressure: 5000 psi (350 bar, 35.0 MPa) Whip Hose, Nylon Coupled 1/4 npsm(f) x 3/8 npt(m), spring guards both ends. Max. working pressure: 3000 psi (210 bar, 21.0 MPa) Whip Hose, Nylon 1/4 in. (6 mm) ID x 6 ft. (2 m). Coupled 1/4 npsm(fbe). Max. working pressure: 5000 psi (345 bar, 34.5 MPa).