Admitting and Discharging Transient Patients

Transcription

1 Admitting and Discharging Transient Patients Goal: Learn to admit and discharge transient patients in CROWNWeb. Estimated Time: 25 to 30 minutes Page 1

2 Table of Contents Course Goals 3 Before You Begin... 4 Admitting Transient Patients... 5 Admitting a Transient Patient... 6 Clinicals for Transient Patients... 7 Discharging Transient Patients... 8 Troubleshooting... 9 Summary Frequently Asked Questions Demonstration Pop-up Blocker Instructions Quiz Admitting and Discharging Transient Patients Quiz Pop-up Blocker Instructions For More Information Quick Start Guides Online Help Field-by-Field Descriptions Page 2

3 Course Goals By completing this course, you will be able to: Admit a transient patient in CROWNWeb. Discharge a transient patient in CROWNWeb. Page 3

4 Before You Begin Before you can complete this procedure, the following conditions must be met: You must be a Facility Editor or a Network Patient Editor. You must have scope over the facility to which you are admitting the patient. Let s get started! Page 4

5 Admitting Transient Patients You must admit a patient as a transient when the admission is temporary less than 30 days or no more than 13 treatments. Admitting a patient as a transient allows the patient to remain admitted to his/her home facility in CROWNWeb (without being discharged), while temporarily visiting your facility. Page 5

6 Admitting a Transient Patient The following interactive tutorial will guide you through admitting a transient patient in CROWNWeb. 1. Click Patients From the CROWNWeb Home Page, click Patients. The Search for Patients screen displays. 2. Click Admit Patient Click Admit Patient from the sub-menu. The Admit Patient screen displays. 3. Enter Patient Information Enter the admit information for the transient patient and then select Yes for the Transient Status. Click Next. The screen expands and transient information is required. 4. Enter Transient Information Enter the Transient Reason and any extra transient information for the patient, and then click Next. The Patient Admission Confirmation screen displays. 5. Patient Admission Confirmation CROWNWeb prompts you to confirm that you are admitting a transient patient. Click Accept. The Admit a Patient - Add Treatment screen displays. 6. Enter Treatment Information Enter treatment information for the patient, and then click Next. The Edit Patient Attributes screen displays. 7. Exact Match Message The Edit Patient Attributes screen displays the message "This patient was an exact match for the New Patient info you entered." Scroll to the bottom of the screen, and click Submit. 8. Transient Details SUBMITTED The View Patient Attributes screen displays the message View Patient Details SUBMITTED. Page 6

7 Clinicals for Transient Patients Transient patients are not required to have labs drawn until after they have had six treatments at your facility. If a transient patient does not have any labs drawn during their visit, the facility must complete the minimum required fields in HD or PD clinical (those with a red asterisk (*) or have a checkbox, such as Sodium Education and the Vaccinations). The minimum required fields do not require lab data just a simple selection or data entry. Page 7

8 Discharging Transient Patients The following interactive tutorial will guide you through discharging a transient patient in CROWNWeb. 1. Click Patients From the CROWNWeb Home Page, click Patients. The Search for Patients screen displays. 2. Enter Search Criteria Enter search criteria to find the patient, then click Search. The Patient Search Results screen displays a list of all patients who match the criteria entered. 3. Click CROWN UPI Click the CROWN UPI of the patient. The View Patient Attributes screen displays. 4. Click Admit/Discharge Summary Click Admit/Discharge Summary in the gray sub-menu. The Admit/Discharge Summary screen displays. 5. Click Admit Date Click the Admit Date for the date that the transient was admitted to your facility. The View Admit/Discharge Information screen displays. 6. Click Edit Admit/Discharge Click Edit Admit/Discharge in the gray sub-menu. The Edit Admit/Discharge Information screen displays. 7. Enter Patient Discharge Information The fields are now enabled for editing. Go to the Patient Discharge Information section and: Enter the Discharge Date and select a Discharge Reason of Transfer. The Transfer Discharge Subcategory field becomes active; select Dialysis Facility from the pull-down menu. Click Submit. 8. Patient Discharged The Admit/Discharge Summary screen displays the message "Patient Admit Discharge Submitted." The Discharge Date and Discharge Reason are now populated on the admit/discharge summary. Page 8

9 Troubleshooting Commonly experienced problems, recognized solutions, and other key information: You must have scope over a facility before you can admit a transient to that facility. Only a Facility Editor or Network Patient Editor can admit a transient patient to a facility. If an out-of-scope near match is found during the admission process, your Network Patient Editor will help you admit the patient. Page 9

10 Summary To admit a transient patient in CROWNWeb: 1. From the Home Page, click Patients. 2. Click Admit Patient. 3. Enter preliminary patient information. For Transient Status select Yes. 4. Enter the Transient Reason and patient s transient information. Click Next. 5. Click Accept on the Patient Admission Confirmation screen. 6. Enter treatment information. Click Next. 7. Click Submit. To discharge a transient patient in CROWNWeb: 1. From the Home Page, click Patients. 2. Search for the patient. 3. Click on the patient s CROWN UPI. 4. Click Admit/Discharge Summary. 5. Click on the date link in the Admit Date column. 6. Click on Edit Admit/Discharge. 7. Enter the Date of Discharge, Discharge Reason (Transfer), and Transfer Discharge Subcategory (Dialysis Facility). 8. Click Submit. Page 10

11 Frequently Asked Questions To view Frequently Asked Questions for this topic, click the following link: ACCESS FAQs Enter the word transient (or any other applicable keyword) to view FAQ content for that topic. Page 11

12 Demonstration The Admitting and Discharging Transient Patients demonstration will allow you to watch the task of admitting and discharging transient patients in real time. Click the View Demonstration button below, -or- Click the Bypass Demonstration button to skip the demonstration and advance to the Admitting and Discharging Transient Patients Quiz. View Demonstration Bypass Demonstration To Quiz Help on Pop-up Blocker Page 12

13 Pop-up Blocker Instructions To turn off pop-up blocker for your web browser when you get the Pop-up blocked. message Go to the top menu bar and select: Tools > Pop-up Blocker > Always Allow Pop-ups from This Site Return to Demonstration Page 13

14 Quiz The Admitting and Discharging Transient Patients Quiz will test your knowledge on generating reports in the CROWNWeb system. Click the Take Quiz button below to take the Admitting and Discharging Transient Patients Quiz; or Click the Bypass Quiz button to skip the quiz and advance to the end of the tutorial. Take Quiz Bypass Quiz End Tutorial Help on Pop-up Blocker Page 14

15 Admitting and Discharging Transient Patients Quiz Q. Patients remain to their Home Facility while visiting another facility as a Transient. A. Close B. Admitted C. Anonymous Answer: B. Admitted Q. At the end of a Transient patient s visit, you would: A. Do nothing B. Tell the patient they are only allowed to be a transient two times within a three-month period. C. Discharge the patient from your facility D. Delete the Transient admit information Answer: C. Discharge the patient from your facility Q. Clinical data does not need to be reported by the visiting facility in CROWNWeb unless the transient has had more than treatments. A. 10 B. 15 C. 6 Answer: C. 6; transient patients do not need clinical data reported in CROWNWeb until they have had more than 6 treatments at the visiting facility. FINISH TUTORIAL Page 15

16 Pop-up Blocker Instructions To turn off pop-up blocker for your web browser when you get the Pop-up blocked. message Go to the top menu bar and select: Tools > Pop-up Blocker > Always Allow Pop-ups from This Site Return to Quiz Page 16

17 For More Information Quick Start Guides The CROWNWeb Quick Start Guides provide short and simple instructions on tasks users can perform in CROWNWeb, including admitting and discharging transient patients. Click the link below to access the CROWNWeb Quick Start Guides. GO TO QUICK START GUIDES Online Help The CROWNWeb Online Help is a resource that contains instruction on all facets of the CROWNWeb system, including admitting and discharging transient patients. Click the link below to access the CROWNWeb Online Help. GO TO ONLINE HELP Field-by-Field Descriptions The CROWNWeb Field-by-Field Descriptions are an online resource that contains details on every field on screens in the CROWNWeb system. Click the link below to access the Patients Field-by-Field Descriptions. GO TO FIELD DESCRIPTIONS Thank you for taking this tutorial! This material was prepared by FMQAI, the CROWNWeb Outreach, Communication, and Training contractor, under contract with the Centers for Medicare & Medicaid Services (CMS), an agency of the U.S. Department of Health and Human Services. The contents presented do not necessarily reflect CMS policy. COCT contract # HHSM G. Publication Number: FL-OCT-2013OTCT Page 17