Amphenol Heavy Duty Cylindrical Connectors
|
|
- Rhoda Ball
- 5 years ago
- Views:
Transcription
1 mphenol Heavy uty ylindrical onnectors mphenol
2 MI , W ccessories M85049 or cable sealing adapters (plug) H T HN STION MX. Type I H T HN MX Type II H R T HN R STION R-R MX Type III 60
3 MI , W ccessories M85049 or cable sealing adapters (plug) ll dimensions for reference only. MS Number* Superseded MS Number Proprietary Number* Used With Shell able Range Min Thread lass 2-H * Ordering procedure: ocate shell size needed (olumn 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part number (column 1) or Proprietary part number (column 3). MS numbers shown are non-conductive finish. To order conductive finish, substitute W for in the part number listed. 10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix ree ength H ± Thread lass 2 (Plated) 0.1P-0.2 ouble Stub pprox. Type M85049/411 MS17342N UN III M85049/421 MS17342N UN III M85049/431 MS17342N UN III M85049/311 MS17340N UN I M85049/321 MS17340N UN I M85049/511 MS17341N UN II M85049/451 MS17342N UN III M85049/441 MS17342N UN III M85049/461 MS17342N UN III M85049/331 MS17340N UN I M85049/471 MS17342N UN III M85049/341 MS17340N UN I M85049/351 MS17340N UN I M85049/361 MS17340N UN I M85049/481 MS17342N UN III M85049/381 MS17340N UN I M85049/371 MS17340N UN I M85049/551 MS17341N UN II M85049/561 MS17341N UN II M85049/391 MS17340N UN I M85049/3101 MS17340N UN I M85049/521 MS17341N UN II M85049/531 MS17341N UN II M85049/541 MS17341N UN II M85049/4121 MS17342N UN III M85049/4101 MS17342N UN III M85049/4111 MS17342N UN III M85049/3111 MS17340N UN I M85049/491 MS17342N UN III M85049/571 MS17341N UN II M85049/591 MS17341N UN II M85049/3121 MS17340N UN I M85049/581 MS17341N UN II M85049/4141 MS17342N UN III M85049/4131 MS17342N UN III M85049/3141 MS17340N UN I M85049/5141 MS17341N UN II M85049/3151 MS17340N UN I M85049/3131 MS17340N UN I M85049/5101 MS17341N UN II M85049/5111 MS17341N UN II
4 MI , W ccessories M85049 or cable sealing adapters (plug) ll dimensions for reference only. MS Number* Superseded MS Number Proprietary Number* Used With Shell able Range Min Thread lass 2-H * Ordering procedure: ocate shell size needed (olumn 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part number (column 1) or Proprietary part number (column 3). MS numbers shown are non-conductive finish. To order conductive finish, substitute W for in the part number listed. 10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix ree ength H ± Thread lass 2 (Plated) 0.1P-0.2 ouble Stub pprox. Type M85049/4181 MS17342N UN III M85049/4161 MS17342N UN III M85049/4171 MS17342N UN III M85049/4151 MS17342N UN III M85049/3181 MS17340N UN I M85049/3161 MS17340N UN I M85049/3171 MS17340N UN I M85049/5161 MS17341N UN II M85049/5131 MS17341N UN II M85049/5191 MS17340N UN I M85049/5171 MS17341N UN II M85049/5181 MS17341N UN II M85049/5151 MS17341N UN II M85049/5141 MS17341N UN II M85049/4201 MS17342N UN III M85049/4191 MS17342N UN III M85049/4211 MS17342N UN III M85049/4221 MS17340N UN I M85049/3211 MS17340N UN I M85049/3201 MS17340N UN I M85049/5201 MS17341N UN II M85049/5241 MS17341N UN II M85049/5231 MS17341N UN II M85049/5191 MS17341N UN II M85049/5211 MS17341N UN II M85049/5261 MS17341N UN II M85049/5251 MS17341N UN II M85049/5221 MS17341N UN II M85049/4231 MS17342N UN III M85049/4251 MS17342N UN III M85049/4221 MS17342N UN III M85049/4241 MS17342N UN III M85049/3241 MS17340N UN I M85049/3231 MS17340N UN I M85049/3251 MS17340N UN I M85049/5281 MS17341N UN II M85049/5351 MS17341N UN II M85049/5311 MS17341N UN II M85049/5271 MS17341N UN II M85049/5321 MS17341N UN II M85049/5301 MS17341N UN II M85049/5291 MS17341N UN II
5 MI , W ccessories M85049 or cable sealing adapters (plug) ll dimensions for reference only. MS Number* Superseded MS Number Proprietary Number* Used With Shell able Range Min Thread lass 2-H * Ordering procedure: ocate shell size needed (olumn 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part number (column 1) or Proprietary part number (column 3). MS numbers shown are non-conductive finish. To order conductive finish, substitute W for in the part number listed. 10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix 88-. ree ength H ± Thread lass 2 (Plated) 0.1P-0.2 ouble Stub pprox. Type M85049/5341 MS17341N UN II M85049/5331 MS17341N UN II M85049/4301 MS17342N UN III M85049/4291 MS17342N UN III M85049/4261 MS17342N UN III M85049/4281 MS17342N UN III M85049/4271 MS17342N UN III M85049/3261 MS17340N UN I M85049/3271 MS17340N UN I M85049/5401 MS17341N UN II M85049/5381 MS17341N UN II M85049/5361 MS17341N UN II M85049/5421 MS17341N UN II M85049/5391 MS17341N UN II M85049/5371 MS17341N UN II M85049/5411 MS17341N UN II M85049/4311 MS17342N UN III M85049/4321 MS17342N UN III M85049/4331 MS17342N UN III M85049/4341 MS17342N UN III M85049/5431 MS17341N UN II M85049/5441 MS17341N UN II M85049/5451 MS17341N UN II M85049/5461 MS17341N UN II 63
6 MI , W ccessories M85049 or cable sealing adapters (receptacle) H T HN P N STION - Type I H T HN P N Type II H R T HN P N R STION R-R Type III 64
7 MI , W ccessories M85049 or cable sealing adapters (receptacle) ll dimensions for reference only. able Used Thread Range Superseded Proprietary With ree lass 2 N MS MS Shell Min Thread ength H P-0.2 P Number* Number Number* lass 2-H ± ouble Stub Maz pprox. Type M85049/411 MS17342N UN III M85049/421 MS17342N UN III M85049/431 MS17342N UN III M85049/311 MS17340N UN I M85049/321 MS17340N UN I M85049/511 MS17341N UN II M85049/451 MS17342N UN III M85049/441 MS17342N UN III M85049/461 MS17342N UN III M85049/331 MS17340N UN I M85049/471 MS17342N UN III M85049/341 MS17340N UN I M85049/351 MS17340N UN I M85049/361 MS17340N UN I M85049/481 MS17342N UN III M85049/381 MS17340N UN I M85049/371 MS17340N UN I M85049/551 MS17341N UN II M85049/561 MS17341N UN II M85049/391 MS17340N UN I M85049/3101 MS17340N UN I M85049/521 MS17341N UN II M85049/531 MS17341N UN II M85049/541 MS17341N UN II M85049/4121 MS17342N UN III M85049/4101 MS17342N UN III M85049/4111 MS17342N UN III M85049/3111 MS17340N UN I M85049/491 MS17342N UN III M85049/571 MS17341N UN II M85049/591 MS17341N UN II M85049/3121 MS17340N UN I M85049/581 MS17341N UN II M85049/4141 MS17342N UN III M85049/4131 MS17342N UN III M85049/3141 MS17340N UN I M85049/5121 MS17341N UN II M85049/3151 MS17340N UN I M85049/3131 MS17340N UN I M85049/5101 MS17341N UN II M85049/5111 MS17341N UN II * Ordering procedure: ocate shell size needed (olumn 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part number (column 1) or Proprietary part number (column 3). MS numbers shown are non-conductive finish. To order conductive finish, substitute W for in the part number listed. 10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix
8 MI , W ccessories M85049 or cable sealing adapters (receptacle) ll dimensions for reference only. able Used Thread Range Superseded Proprietary With ree lass 2 N MS MS Shell Min Thread ength H P-0.2 P Number* Number Number* lass 2-H ± ouble Stub pprox. Type MS85049/4181 MS17342N UN III MS85049/4161 MS17342N UN III MS85049/4171 MS17342N UN III MS85049/4151 MS17342N UN III MS85049/3181 MS17340N UN I MS85049/3161 MS17340N UN I MS85049/3171 MS17340N UN I MS85049/5161 MS17341N UN II MS85049/5131 MS17341N UN II MS85049/3191 MS17340N UN I MS85049/5171 MS17341N UN II MS85049/5181 MS17341N UN II MS85049/5151 MS17341N UN II MS85049/5141 MS17341N UN II MS85049/4201 MS17342N UN III MS85049/4191 MS17342N UN III MS85049/4211 MS17342N UN III MS85049/3221 MS17340N UN I MS85049/3211 MS17340N UN I MS85049/3201 MS17340N UN I MS85049/5201 MS17341N UN II MS85049/5241 MS17341N UN II MS85049/5231 MS17341N UN II MS85049/5191 MS17341N UN II MS85049/5191 MS17341N UN II MS85049/5261 MS17341N UN II MS85049/5251 MS17341N UN II MS85049/5221 MS17341N UN II MS85049/4231 MS17342N UN III MS85049/4251 MS17342N UN III MS85049/4221 MS17342N UN III MS85049/4241 MS17342N UN III MS85049/3241 MS17340N UN I MS85049/3231 MS17340N UN I MS85049/3251 MS17340N UN I MS85049/5281 MS17341N UN II MS85049/5351 MS17341N UN II MS85049/5311 MS17341N UN II MS85049/5271 MS17341N UN II MS85049/5321 MS17341N UN II MS85049/5301 MS17341N UN II * Ordering procedure: ocate shell size needed (olumn 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part number (column 1) or Proprietary part number (column 3). MS numbers shown are non-conductive finish. To order conductive finish, substitute W for in the part number listed. 10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix
9 MI , W ccessories M85049 or cable sealing adapters (receptacle) ll dimensions for reference only. able Used Thread Range Superseded Proprietary With ree lass 2 N MS MS Shell Min Thread ength H P-0.2 P Number* Number Number* lass 2-H ± ouble Stub pprox. Type M85049/5291 MS17341N UN II M85049/5341 MS17341N UN II M85049/5531 MS17341N UN II M85049/4301 MS17342N UN III M85049/4291 MS17342N UN III M85049/4261 MS17342N UN III M85049/4281 MS17342N UN III M85049/4271 MS17342N UN III M85049/3261 MS17340N UN I M85049/3271 MS17340N UN I M85049/5401 MS17341N UN II M85049/5381 MS17341N UN II M85049/5361 MS17341N UN II M85049/5421 MS17341N UN II M85049/5391 MS17341N UN II M85049/5371 MS17341N UN II M85049/5411 MS17341N UN II M85049/4311 MS17342N UN III M85049/4321 MS17342N UN III M85049/4331 MS17342N UN III M85049/4341 MS17342N UN III M85049/5431 MS17341N UN II M85049/5441 MS17341N UN II M85049/5451 MS17341N UN II M85049/5461 MS17341N UN II * Ordering procedure: ocate shell size needed (olumn 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part number (column 1) or Proprietary part number (column 3). MS numbers shown are non-conductive finish. To order conductive finish, substitute W for in the part number listed. 10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix
10 MI , W ccessories adapter, cable clamp XX( ) adapter V T HN ( )3 cable clamp M Y Z MS3420-( ) sleeve 68
11 MI , W ccessories adapter, cable clamp ll dimensions for reference only. Shell Proprietary dapter Number* lamp Number** Superseded MS Number Thread lass 2 (Plated) * To attach the cable clamp to the left hand accessory threads of W connectors, adapter XX is needed. Order this proprietary adapter from column 2 and suffix the part number with the finish desired, listed in the finish chart below. ** Order MS clamp (column 3) to accommodate the cable type being used. Standard finish on the clamp is olive drab, cadmium plate. Min ull Thd ± ±.010 M V Thread lass 2-H ree losed ( ) ( ) MS UN UN ( ) ( ) MS UN UN ( ) ( ) MS UN UN ( ) ( ) MS UN UN ( ) ( ) MS UN UN ( ) ( ) MS UN UN ( ) ( ) MS UN UN ( ) ( ) MS UN UN ( ) ( ) MS UNS UNS ( ) ( ) MS UNS UNS ( ) ( ) MS UN UN Y Shell Sleeve MS Number Z ree losed ± MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS Sleeve not supplied as part of assembly. Order separately by part number shown inish hart for dapter & lamp right admium Plate lack nodize Olive rab, admium Plate ray nodize nodic oating Olive rab admium Plate, Nickel ase * No third digit required for and not available for Suffix -XX1 -XX2 -XX3 -XX4 -XX* -XX9 69
12 MI , W ccessories protective covers MS ( ) plug protective cover MS17349-XX ( ) receptacle protective cover MS17349-XX ( ) receptacle protective cover 70
13 MI , W ccessories protective covers ll dimensions for reference only. Shell Plug Protective over MS Number* Plug Protective over Proprietary Number** Thread lass 2 (Plated) 0.1P-0.2 ouble Stub.005 pprox. 12 MS17350-( ) ( ) MS17350-( ) ( ) MS17350-( ) ( ) MS17350-( ) ( ) MS17350-( ) ( ) MS17350-( ) ( ) MS17350-( ) ( ) MS17350-( ) ( ) MS17350-( ) ( ) MS17350-( ) ( ) MS17350-( ) ( ) *Order MS-approved covers as per coded part number example: PRT NUMR MS MS Number - MS17350 designated plug protective cover MS17349 designated receptacle protect cover 2. over inish - for conductive, N for non-conductive. 3. over - Shell size of connector with which cover is used. 4. over Type - (MS17349 only) - - Washer Termination, used with: MS17345 line (cable connecting) plug MS17347 jam nut receptacle MS17348 jam nut receptacle - yelet Termination - used with: MS17343 wall mount receptacle MS17346 box mount receptacle Shell Receptacle Protective over MS Number* MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) MS17349-( ) Receptacle Protective over Proprietary Number** ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Thread lass 2 0.1P-0.2 ouble Stub.005 pprox **Order Proprietary covers as per coded part number example: PRT NUMR ase Number designates plug cover with chain designates receptacle cover with chain designates receptacle cover with chain and attaching ring 2. over - Shell size of connector with which cover is used. 3. inish Non-conductive lumilite finish 9 - onductive olive drab cadmium plate over nickel finish Note: Protective covers are supplied with all M85049 style cable sealing adapters. 71
14 W ccessories sealing gaskets R (TP).031 ±.010 ( ).031 ±.005 ( ) R (TP) T 4 HOS ll dimensions for reference only. Number* Shell R ±.010 * ( ) for operating temperature range 67 to Order by part number listed to accommodate shell size being used. T ± Number** Shell R ±.010 ** ( ) for operating temperature range 0 to Order by part number listed to accommodate shell size being used. T ±
15 W ccessories encapsulation adapter N.425 R T HN H Y ll dimensions for reference only. Number* Shell Thread lass 2-H ± ±.005 *Order by part number listed to accommodate shell size being used. To complete part number add suffix for finish desired from table below ± ± ±.005 H ±.005 ±.031 N ±.016 ± ( ) UN ( ) UN ( ) UN ( ) UN ( ) UN ( ) UN ( ) UN ( ) UN ( ) UN ( ) UN ( ) UN ( ) UN ( ) UN Y inish right admium Plate lack nodize admium Plate, Olive rab ray nodize nodic oating admium Plate Nickel ase Suffix -XX1 -XX2 -XX3 -XX4 -XX5 -XX7 73
16 W ccessories encapsulation end bell ll dimensions are for reference only. Number* ±.010 ± *Order by part number listed to accommodate shell size being used. 74
17 MI , W MS solder contacts Machine copper alloy contacts in a full range of sizes, with closed entry socket design in the size 12 and 16 contacts. heavy silver-plated finish is deposited on all MS style solder contacts for maximum corrosion resistance, maximum current carrying capacity and low millivolt drop. old plated contacts are also available (See how to order, page 22) Number Pin/ Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket SOR ONTTS* Mating nd Wire arrel 16 ong llowable Wire Test urrent** mps * Solder Wells Unfilled **ontact ratings as stated are test ratings only. The connector could not withstand full rated current through all contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer s hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit MS Service Rating Table I ONTT RRNMNT SRVI RTIN Recommended Operating * at Sea evel (RMS) ffective reepage istance Nom. Mechanical Spacing Nom. Inst / /8 1/ /16 1/ /4 3/ /16 1/ /16 * The values listed in Table I represent operating values which include a generous safety factor. It may be necessary for some applications to exceed the operating voltages listed here. If this is necessary, desigers will find Table II useful for determining the degree to which the recommended values of Table I can be exceeded. MS Service Rating irspace Nominal istance reepage Table II TITU VOT RTIN** HRT Standard Sea evel onditions Minimum lashover (RMS) Test (RMS) Pressure ltitude 50,000 eet Minimum lashover (RMS) Test (RMS) Pressure ltitude 70,000 eet Minimum lashover (RMS) Test (RMS) Inst. 1/32 1/ /16 1/ /8 3/ /16 1/ /4 5/ / Not corrected for changes in density due to variations in temperature. **No attempt has been made to recommend operating voltages. The designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc. 75
18 W solderless (crimp) contacts Machined from copper alloys and silver-plated for maximum corrosion resistance, with a minimum millivolt drop and a maximum current carrying capacity, the size 16 and 12 socket contacts are of the closed entry design. rimp contacts are available for all MS insert arrangements and are identified with an mphenol proprietary number. old plated contacts are also available (See how to order, page 22). RIMP ONTTS* Number Pin Pin/ Socket or Socket Pin or Socket Pin Socket Pin Socket Pin Socket Mating nd Wire arrel 16 ong llowable Wire * * 4 6* 0 2* Required Wire dapter Sleeve Test urrent** mps * When using wire adapter sleeve shown. ** ontact ratings as stated are test ratings only. The connector could not withstand full rated current through all contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer s hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. MS Service Rating Table I ONTT RRNMNT SRVI RTIN Recommended Operating * at Sea evel (RMS) ffective reepage istance Nom. Mechanical Spacing Nom. Inst / /8 1/ /16 1/ /4 3/ /16 1/ /16 * The values listed in Table I represent operating values which include a generous safety factor. It may be necessary for some applications to exceed the operating voltages listed here. If this is necessary, designers will find Table II useful for determining the degree to which the recommended values of Table I can be exceeded. Nominal istance Table II TITU VOT RTIN** Standard Sea evel onditions Pressure ltitude 50,000 feet Pressure ltitude 70,000 feet Minimum Minimum Minimum MS Service Rating irspace reepage lashover (RMS) Test (RMS) lashover (RMS) Test (RMS) lashover (RMS) Test (RMS) Inst. 1/32 1/ /16 1/ /8 3/ /16 1/ /4 5/ / Not corrected for changes in density due to variations in temperature. ** No attempt has been made to recommend operating voltages. The designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc. 76
19 W application tools omplete installation instructions (-615) for mphenol W Series onnectors are available on request. The following data includes information pertaining to the application tools which have been established for crimping, inserting and removing crimp contacts used in W Series onnectors. ontact rimping, Insertion & Removal Tools rimping Tool Positioner/ Turret ontact ontact Style Insertion Tool Removal Tool M22520/1-01 * 16 Pin & Socket it M22520/1-01 * 12 Pin & Socket it ** ** 8 Pin & Socket it ** ** 4 Pin & Socket ** ** 0 Pin & Socket * Use aniels Turret TH29-1 or stro Tool o. Turret **or appropriate crimp tool and positioner refer to Pico rimping Tool o. Tool used with rbor press Pin Socket Pin Socket
20 Mouser lectronics uthorized istributor lick to View Pricing, Inventory, elivery & ifecycle Information: mphenol: MS MS MS MS
CHANGE-OUT SERIES A STOOW FEMALE PLUGS WITH ZINC DIECAST COUPLING NUT CHANGE-OUT SERIES A STOOW FEMALE PLUGS WITH NYLON COUPLING NUT
CHANGE-OUT SERIES A STOOW FEMALE PLUGS WITH ZINC DIECAST COUPLING NUT FE 2 1. Black 600V, 18A 14 6' X8651-49P 2. White 12' X8651-50P 18' X8651-51P 3 1. Black 600V, 18A 14 6' X8652-48P 2. White 12' X8652-49P
More informationCOMMERCIAL ITEM DESCRIPTION SHUNT, INSTRUMENT (EXTERNAL, 50 MILLIVOLT, 10 THROUGH 150 AMPERES (A) LIGHTWEIGHT TYPE)
INCH-POUND A-A-55524/1B 22 February 2012 SUPERSEDING A-A-55524/1A 31 January 2003 COMMERCIAL ITEM DESCRIPTION SHUNT, INSTRUMENT (EXTERNAL, 50 MILLIVOLT, 10 THROUGH 150 AMPERES (A) LIGHTWEIGHT TYPE) The
More informationVERTICAL TURBINE. PUMPS Repair Parts Table
Peerless Pump Company VERTICAL TURBINE SECTION 150 PUMPS Repair Parts Table Page 0.1 Sorted By Pages (See page 0.2 for sorting by Description) February 26, 1999r Group Description Page Group Description
More informationMCC. SMBJP6KE6.8(C)A THRU SMBJP6KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 600 Watt.
NOTES: Features Halogen free available upon request by adding suffix "-HF" For surface mount applicationsin in order to optimize board space Available in both unidirectional and bidirectional construction
More informationELECTRICAL INSPECTION ACT CANADIAN ELECTRICAL CODE REGULATIONS
c t ELECTRICAL INSPECTION ACT CANADIAN ELECTRICAL CODE REGULATIONS PLEASE NOTE This document, prepared by the Legislative Counsel Office, is an office consolidation of this regulation, current to June
More informationEasylink to Square D Module
Document o. 587-326 Easylink to Square D Module Product Description The Easylink Module mounts in an enclosure (P/ 587-300, 115 Vac or P/ 587-295, 230 Vac). Once installed, the Easylink Module is positioned
More informationTECHNICAL MANUAL UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
TECHNICAL MANUAL UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL GENERATOR SET, SKID MOUNTED, TACTICAL QUIET 15 KW, 50/60 AND 400 Hz MEP-804A (50/60 Hz) 6115-01-274-7388 MEP-814A (400 Hz) 6115-01-274-7393
More informationParts List. Commercial Series Refrigerated Kitchen Equipment
Parts List Commercial Series Refrigerated Kitchen Equipment Models CR1S, CF1S CR2S, CF2S CR3S, CF3S Full Glass (FGE/FGY), Full Solid (FS), Half Solid (HS) hoshizakiamerica.com Number: 7132 Issued: 12-28-201
More informationThomas Built Buses Using ServiceLink TBB Institute
Thomas Built Buses Using ServiceLink TBB Institute April 24, 2012 Center for Education Security Classification Line 1 Center for Education Thomas Built Buses 2 ServiceLink www.accessfreightliner.com Log
More informationMedical Grade Power Strips
Product Bulletin for Medical Grade Power Strips For use in Patient Care Areas of Health Care Facilities Conforms to UL 60601-1, UL 60950-1 and UL 1363A Leviton s family of medical-grade power strips are
More informationTABLE OF CONTENTS FINAL ASSEMBLY (3 WIRE)... 1 FINAL ASSEMBLY (2 WIRE)... 2 DOOR ASSEMBLY (3 WIRE)... 4 DOOR ASSEMBLY (2 WIRE)...
FEB2008 4216770 B TABLE OF CONTENTS FINAL ASSEMBLY (3 WIRE)... 1 FINAL ASSEMBLY (2 WIRE)... 2 FINAL ASSEMBLY (3 WIRE & 2 WIRE) PARTS LIST... 3 DOOR ASSEMBLY (3 WIRE)... 4 DOOR ASSEMBLY (3 WIRE) PARTS LIST...
More informationNEMA LAY-IN WIREWAY
Quick Features : Seamless welding Poured gasket raw pull catches omplete system asy installation Powder coating NM 12-13 LY-N WRWY Oil and dust tight lay-in wireway The 1500 series oil tight lay-in wireway
More informationTECHNICAL MANUAL OPERATOR, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
TECHNICAL MANUAL OPERATOR, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) POWER UNIT, 2 1/2 TON DIESEL ENGINE DRIVEN, TRAILER MOUNTED, 60 kw, 50/60 Hz, PU-805
More informationTERMS & CONDITIONS. 1. The maintenance work should be carried out at Pondicherry University campus and Guest House, kalapet, Puducherry.
TERMS & CONDITIONS 1. The maintenance work should be carried out at Pondicherry University campus and Guest House, kalapet, Puducherry. 2. The work should be carried out strictly in accordance with CPWD
More informationWIRING DIAGRAM KITCHEN OUTLETS
16 April, 2018 WIRING DIAGRAM KITCHEN OUTLETS Document Filetype: PDF 493.69 KB 0 WIRING DIAGRAM KITCHEN OUTLETS Wiring always has to be protected from. How to Wire a GFCI Outlet for a Garbage Disposal.
More informationNOTE ON PERFORMANCE TESTING
NOTE ON PERFORMANCE TESTING Performance Profile Sheet(s) are included in a format that can be easily photocop ied for each trainee. Performance tests are designed to mea sure competency in the s taught
More information2-DAYS OF EDUCATION TUESDAY, AUGUST 7, :00 AM - 5:00 PM TRADE SHOW WEDNESDAY, AUGUST 8, :00 AM - 2:00 PM YOU ARE CORDIALLY INVITED
YOU ARE CORDIALLY INVITED to attend the IDN-Grand Rapids Trade Show TRADE SHOW 11:00 AM - 2:00 PM LIVE AT 2-DAYS OF EDUCATION TUESDAY, AUGUST 7, 2018 8:00 AM - 5:00 PM 8:00 AM - 11:00 AM LOOK INSIDE FOR
More informationKimberly Shea, Administrator, Technical Projects. SUBJECT: NFPA 70 Second Draft TC Ballot Final Results (A2016)
National Fire Protection Association 1 Batterymarch Park, Quincy, MA 02169-7471 Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.org TO: NEC Code-Making Panel 12 FROM: Kimberly Shea, Administrator, Technical
More informationISABELLA COUNTY REQUEST FOR PROPOSALS COMMISSION ON AGING CATV AND HEADEND EQUIPMENT
ISABELLA COUNTY REQUEST FOR PROPOSALS COMMISSION ON AGING CATV AND HEADEND EQUIPMENT ISSUED BY ISABELLA COUNTY BOARD OF COMMISSIONERS ISSUE DATE: February 4, 2008 ISABELLA COUNTY REQUEST FOR PROPOSALS
More informationItem No. Description Part No.
MONITRON II Boiler Replacement Parts List LISTED 89C4 Electric Hot Water Boiler This parts list must be left with owner, hung on or adjacent to the boiler. Owner should retain parts list for future reference.
More informationOPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND
*TM 9-1270-212-14&P TECHNICAL MANUAL No. 9-1270-212-14&P HEADQUARTERS DEPARTMENT OF THE ARMY WASHINGTON, D. C., 10 JULY 1981 OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
More informationF60CET 06 (6C52) 1E6C5-280E /3/31 NEWS NO. DATE COMMENT PE0-OM March,2,2009 MOD:FIG.24 PTT(6C D) P/No.
F60CET 06 () 1E6C5-280E1 ( ) 2009/3/31 NEWS DATE COMMENT PE0-OM-090024 March,2,2009 MOD:FIG.24 PTT(6C5-43800-01-8D) P/No. REVISION F60CET PARTS CATALOGUE 2006 by Yamaha Motor Co., Ltd. 1st edition, August
More informationTECHNICAL MANUAL OPERATORS AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) DEMOLITION MATERIALS
TECHNICAL MANUAL OPERATORS AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) DEMOLITION MATERIALS HEADQUARTERS, DEPARTMENT OF THE ARMY MARCH 1973 * TM 9--1375-213-12
More informationRFP for 2015 E-Rate Funded Wireless Upgrade Project at Four Locations In Thomasville City Schools RFP Reference# 2015Wireless Cabling Contact Mike
RFP for 2015 E-Rate Funded Wireless Upgrade Project at Four Locations In Thomasville City Schools RFP Reference# 2015Wireless Cabling Contact Mike Ingram Chief Information Officer Thomasville City Schools
More informationAIRCRAFT WEAPONS SYSTEMS TEST EQUIPMENT
CHAPTER 16 AIRCRAFT WEAPONS SYSTEMS TEST EQUIPMENT Aviation ordnancemen use test equipment in all phases of electrical testing of weapons systems. The testing procedures you use are required at specific
More information1.5 to 5 Tons INDOOR COILS C33. Upflow - Cased and Uncased PRODUCT SPECIFICATIONS C A - 2 F MODEL NUMBER IDENTIFICATION FEATURES
INDOOR COILS C33 PRODUCT SPECIFICATIONS Upflow - Cased and Uncased Bulletin No. 20280 September 203 Supersedes June 202 MODEL NUMBER IDENTIFICATION FEATURES WARRANTY Unit Type C = Indoor Coil - Upflow
More informationTESTING APPLICATION STANDARD (TAS) IMPACT TEST PROCEDURES
TESTING APPLICATION STANDARD (TAS) 201-94 IMPACT TEST PROCEDURES 1. 2. Scope: 1.1 This protocol covers procedures for conducting the impact test of materials as required by Section 1626 of the Florida
More informationCERTIFICATES OF ELECTRICAL SAFETY RESPONSIBILITY OF RECs AND ELECTRICIANS
OFFICE OF THE CHIEF ELECTRICAL INSPECTOR Level 3, Building 2, 4 Riverside Quay, Southbank PO Box 262, Collins Street West, Melbourne, Vic, 8007 ABN 33 592 662 340 CERTIFICATES OF ELECTRICAL SAFETY RESPONSIBILITY
More informationF225AET 06 (69J5) FL225AET 06 (69K5) 1E69J-280E1
F225AET 06 () FL225AET 06 () 1E69J-280E1 ( ) F225AET/FL225AET PARTS CATALOGUE 2006 by Yamaha Motor Co., Ltd. 1st edition, August 2006 All rights reserved. Any reprinting or unauthorized use without the
More informationAir Force Lifecycle Management Center (AFLCMC)
Air Force Lifecycle Management Center (AFLCMC) Air Force Materiel Command Parts Management PSMC 1 NOV 2016 AFLCMC/EZSS PHONE: 937-656-2645 1 Hanscom AFB, Hill AFB AIR FORCE MATERIEL COMMAND AIR FORCE SPACE
More informationNon-MACT Plating Operations
NEW JERSEY DEPARTMENT OF ENVIRONMENTAL PROTECTION AIR QUALITY PERMITTING GENERAL PERMIT REGISTRATION FORM Non-MACT Plating Operations SECTION A: FACILITY PROFILE Facility ID Number Facility Name Street
More informationClinical Pendants. starkstrom. Enhancing Safety at the Bedside. Powering Healthcare. a Progility company
Clinical Pendants Enhancing Safety at the Bedside a Progility company Powering Healthcare 2014 Starkstrom s Clinical Pendants Combining function and aesthetics, Starkstrom s range of ceiling mounted clinical
More informationARMY TM AIR FORCE TO-35C NAVY NAVFAC P
AIR FORCE TO-35C2-3-445-1 TECHNICAL MANUAL Operator And Unit Maintenance Manual GENERATOR SET, DIESEL ENGINE DRIVEN, TACTICAL SKID MTD, 15 KW, 3 PHASE, 4 WIRE, 120/208 AND 240/416 VOLTS DOD MODEL CLASS
More informationPipeline Operational Qualification (OQ) Crosswalks
Pipeline Operational Qualification (OQ) Crosswalks A guide to the 3 rd edition pipeline covered task modules. Complete Packet Crosswalks provided for: 1 st & 2 nd Edition s 1 st & 2 nd Edition s 1 st &
More information1. Perform maintenance tasks associated with L120 and SMB actuators: 3. Evaluate L120 and SMB actuators for correct operation.
PROGRAM TITLE: SMB/L120 ACTUATORS PROGRAM LENGTH: 24 HOURS This program presents the fundamental maintenance and operation of L120 and SMB actuators. Mechanical and electrical operation is presented in
More informationThe Plug-In Coupling System.
2018.1 The Plug-In Coupling System. For Corrugated Stainless Steel Pipes. --------------------------------------------- made in Germany A6 THE SPECIALIST FOR CORRUGATED PIPES. 2 The Plug-in Coupling System
More informationPC-1600 Mech 230/460v PC v BL PC v BL PC-1300 Mech 230/460v
Mech 380-0558007884 Mech 380-0558007882 380-0558007234 380-0558007224 Mech 0558008933 Mech 0558008932 0558007636 0558007634 Mech 0558008142 Mech 0558008141 0558007237 0558007227 Mech 0558007883 Mech 0558007881
More informationField Raked Poles. Southern Pine & Coastal Douglas-fir 32ft - 107ft Longer Poles Available Upon Request
aminated ood Systems, Inc. Field aked Poles Southern Pine & Coastal Douglas-fir 32ft - 107ft onger Poles Available Upon equest aminated ood Systems, Inc. 1-800-949-3526 www.lwsinc.com E-AM Standard aked
More informationL1-CHE-SPE-305 SIGNAL IDENTIFICATION AND GENERAL INFORMATION
Engineering Specification Signalling L1-CHE-SPE-305 SIGNAL IDENTIFICATION AND GENERAL INFORMATION Version: 1 ENGINEERING SPECIFICATION SIGNAL IDENTIFICATION AND GENERAL INFORMATION L1-CHE-SPE-305 Version:
More informationDocument source:
INCH-POUND MIL-I-6115A AMENDMENT 4 15 December 1999 SUPERSEDING AMENDMENT 3 31 December 1960 MILITARY SPECIFICATION INSTRUMENT SYSTEMS, PITOT TUBE AND FLUSH STATIC PORT OPERATED, INSTALLATION OF This amendment
More informationTARGUS NOTEBOOK SECURITY DEFCON SCL SERIALIZED COMBINATION CABLE LOCK
notebook security DEFCON SCL serialized combination cable lock USER GUIDE Visit our Website at www.targus.com Features and specifications subject to change without notice. 2006 Targus Group International,
More informationA. General provisions and other electrical systems are specified in other Sections of Division 26.
PART 1: GENERAL 1.01 DESCRIPTION: A. General provisions and other electrical systems are specified in other Sections of Division 26. B. Commissioning is an ongoing process and shall be performed throughout
More informationTECHNICAL MANUAL OPERATOR'S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
TECHNICAL MANUAL OPERATOR'S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) AIR CONDITIONER: TRAILER-MOUNTED, GENERATOR-SET-POWERED, 18,000 BTU/HR (NSN 4120-00-930-5700)
More information66CF1005 Certificate lifting equipment with new delivery Pag. 64/03
Estil Spur-Gear Chain Hoists Estil Link Chain Hand-Lever Hoists Estil Steel wire hoist and lashing devises. Estil Trolleys for manual and electrical hoists Estil Beam clamps for temporarty lifting points
More informationTECHNICAL MANUAL OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL
TECHNICAL MANUAL OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL AIR CONDITIONER, HORIZONTAL, COMPACT, 36,000 BTU/HR, MULTI-POWER INPUT 208V, 3 PHASE, 50/60/400 HZ MODEL MH-40-MP
More informationCHUK Hospital Statistics 1
Summer Institute 2013, Rwanda CHUK Hospital in Kigali Dustin Ritter Sarah Ritter End-of-program Conference July 27-28, 2013 CHUK Hospital Statistics 1 Largest hospital in Rwanda (referral) 66 doctors (45
More informationTM ARMY AH-64A HELICOPTER HELLFIRE MISSILE EQUIPMENT AVIATION INTERMEDIATE MAINTENANCE MANUAL TECHNICAL MANUAL
TECHNICAL MANUAL AVIATION INTERMEDIATE MAINTENANCE MANUAL ARMY AH-64A HELICOPTER HELLFIRE MISSILE EQUIPMENT This copy is a reprint which includes current pages from Changes 1 through 6. HEADQUARTERS, DEPARTMENT
More informationCONVENIENCE CORNER STORE RIGHT ON THE FLOOR
Metal Fabrication Abrasives Vending Solutions CORNER STORE CONVENIENCE RIGHT ON THE FLOOR Pre-selected product assortment for optimal coverage of popular applications Industry s best selection of abrasive
More informationDEPARTMENT OF THE ARMY TECHNICAL MANUAL *TM DEPARTMENT OF THE AIR FORCE TECHNICAL ORDER TECHNICAL MANUAL
DEPARTMENT OF THE ARMY TECHNICAL MANUAL *TM 5-6115-593-12 DEPARTMENT OF THE AIR FORCE TECHNICAL ORDER TO-35C2-3-463-1 TECHNICAL MANUAL Operator and Organizational Maintenance Manual GENERATOR SET, DIESEL
More informationTECHNICAL MANUAL FOR OPTICAL FIBER TEST SET TS-4320(P)/G (NSN ) (EIC: N/A)
TM 11-6625-3271-24P TECHNICAL MANUAL UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) FOR OPTICAL FIBER
More informationSpecifications, Performance & Submittal
Presents Specifications, Performance & Submittal Multi Zone Condenser ( Heat Pump) Model: Multi Zone Condenser M Z H D A A M=Multi Z= Zone 2= Zone 3=Zone 4=Zone 5=Zone Operation: [H=Heat Pump] Voltage:
More informationProject Planning Document Request for Proposals
Project Planning Document Request for Proposals LIFT-Coatings-15-01 Surface Finishing to Enable Design and Manufacturing with Lightweight Alloys Project Call Release Date: December 11, 2015 POC: Alan TAUB
More informationMULTMED MODULAR MEDICAL BED LIGHT
MULTMD MODULAR MDICAL BD LIGHT SUBMITTAL: JOB: TYP: VOLTAG: XAMPL 4 ARN G - 250TT/450TT/0TT - OPTIONS - B2-B2/2-B1 - UNV SRIS NOM. STYL CILING # LAMPS AND LAMP WATTAG/TYP OPTIONS BALLAST TYP VOLTAG L.
More information*TB HEADQUARTERS, DEPARTMENT OF THE ARMY WASHINGTON, DC, 1 AUGUST 1999
1 AUGUST 1999 *TB 11 5820 890 20 11 HEADQUARTERS, DEPARTMENT OF THE ARMY WASHINGTON, DC, 1 AUGUST 1999 REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS You can help improve this manual. If you find any
More informationBuck & Boost Transformer Installation Instructions
Buck & Boost Installation Instructions 120 V x 240 V - 12/24 V Class 7414 Introduction This manual provides installation, operation, and maintenance instructions for the 2847 Buck & Boost transformer,
More informationB. All of the documents in this RFP form the Basis-of-Design for this project.
SECTION 01 91 13 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification Sections,
More informationSpare Part Catalogue. Star Cool refrigeration unit Model SC MCI40, SCU and SCI
Spare Part Catalogue Star Cool refrigation unit Model SC MCI0, SCU and SCI Vsion 8090C - Jume 0 Introduction The Star Cool reef machine incorporates innoatie features compared to the traditional equipment
More informationOPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL FOR MULTIPLEXER SET AN/FCC-97 (NSN )
ARMY TM 11-5805-694-14 AIR FORCE TO 31W2-4-287-1 OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL FOR MULTIPLEXER SET AN/FCC-97 (NSN 5805-01-0308) This copy is a reprint
More informationDEPARTMENT OF THE ARMY TECHNICAL MANUAL OPERATOR'S AND ORGANIZATIONAL MAINTENANCE MANUAL ELECTRONIC MULTIMETERS TS-505A/U
DEPARTMENT OF THE ARMY TECHNICAL MANUAL TM 11-6625-239-12 OPERATOR'S AND ORGANIZATIONAL MAINTENANCE MANUAL ELECTRONIC MULTIMETERS TS-505A/U AND TS-505B/U AND MULTIMETERS TS-505C/U AND TS-505D/U This copy
More informationDEFCON KL. Notebook Computer Key Lock
DEFCON KL Notebook Computer Key Lock Targus DEFCON KL Thank you for purchasing the Targus DEFCON KL Notebook Computer Key Lock. The cut and tamperresistant DEFCON KL helps protect your valuable notebook
More informationARCHITECTS' AND ENGINEERS' SPECIFICATIONS FOR NC300 MICROPROCESSOR NURSE CALL SYSTEM
ARCHITECTS' AND ENGINEERS' SPECIFICATIONS FOR NC300 MICROPROCESSOR NURSE CALL SYSTEM PART 1 - GENERAL 1.1 INTENT 1.1.1 It is the intent of this specification to describe the operation of specific equipment
More informationBattery Recycling in the Union. Organization name: Illini Union Board Date of Submission: April 1 st 2011
Battery Recycling in the Union Organization name: Illini Union Board Date of Submission: April 1 st 2011 1. Name of Group: Illini Union Board and Kim Pekar, SSC recycling intern 2. Primary Contact: Name:
More informationeconsult econsult Introduction & Training Manual
econsult Introduction & Training Manual Table of Contents Introduction to econsult.....3 Certification & Requirements....4 Referral & Scheduling Process....5 econsult Appointments......6 Video Equipment....7
More informationSub : Guidelines for Procurement from Micro and Small Enterprises (MSEs)
DULIAJAN [GM(COMMERCIAL) OFFICE] Ref. GM(COM):02/01-478 August 14, 2015 All Executive Directors All Group General Managers All General Managers All Heads of Departments Heads of C&P Functions of All Spheres
More informationService Manual. WorkCentre Multifunction Printer. WC5016 WC5020 Black-and-white. Multifunction Printer
Service Manual WorkCentre 5016 5020 Multifunction Printer WC5016 WC5020 Black-and-white Multifunction Printer Work Center 5016, 5020 Service Documentation 701P48365 June 2008 CAUTION Certain components
More informationAudio. Distribution. Network ADN C1/ADN D1. Quick guide
Audio Distribution Network ADN C1/ADN D1 Quick guide Information on this quick guide Information on this quick guide Please make sure to read the Safety information supplement included separately with
More informationUser Manual Lobby Camera Phone
User Manual Lobby Camera Phone DRC-GUM/RF1 Thank you for purchasing COMMAX products. Please carefully read this User s Guide (in particular, precautions for safety) before using a product and follow instructions
More informationwww MK-Electronic de 5 Parts List 8. Xerographic PL 8.1 Xerographic (1 of 2) PL 8.2 Xerographic (2 of 2)
Overview Introduction... 5-5 Subsystem Information... 5-6 Symbology... 5-7 s 1. IIT/CP PL 1.1 Platen/IIT Cover... 5-9 PL 1.2 Control Panel/Platen Glass... 5-10 PL 1.3 Control Panel (1 of 2)... 5-11 PL
More information*TM &P INTRODUCTION PAGE 1-1
*TM 9-2540-205-24&P INTRODUCTION PAGE 1-1 *TM 9-2540-205-24&P Technical Manual HEADQUARTERS DEPARTMENT OF THE ARMY NO. 9-2540-205-2481P Washington D. C., 10 April 1992 ORGANIZATIONAL, DIRECT SUPPORT, AND
More informationSURGICAL SERVICE SPECIALTY. Set Up and Safe Operation of Equipment
DEPARTMENT OF THE AIR FORCE Headquarters US Air Force Washington, DC 20330-5000 QTP 4N1X1X-05 25 July 2014 SURGICAL SERVICE SPECIALTY Set Up and Safe Operation of Equipment ACCESSIBILITY: Publications
More informationAPPLE-l CASSETTE INTERFACE
APPLE-l CASSETTE INTERFACE INTRODUCTION The Apple Cassette Interface (ACI) is a peripheral device for the Apple Computer which enables the user to store and retrieve information (data and programs) using
More informationProduct Brochure. If you would like to browse our website please click here
Product Brochure If you would like to browse our website please click here Stockholm: A range of table lights formed from veneered plywood. A choice of metal finishes is available. Description Product
More informationARMY TM AIR FORCE TO 35C MARINE CORPS TM 10155A-13/1
OPERATOR S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL OPERATING INSTRUCTIONS 2-1 OPERATOR TROUBLESHOOTING 3-3 UNIT LEVEL PMCS 4-7 UNIT LEVEL TROUBLESHOOTING 4-12 UNIT MAINTENANCE PROCEDURES 4-27 DIRECT
More informationUMSD Tour for DH NERB
UMSD Tour for DH NERB PARKING: Candidates are to park in the Visitor section of the Palmer Drive Parking Structure when attending the tour (for driving and parking directions, see Visitor Parking online:
More informationTECHNICAL BULLETIN VIS
ARMY TB 11-5830-263-20-1 MARINE CORPS MI 08953A-35/26 TECHNICAL BULLETIN VIS INSTALLATION INSTRUCTIONS FOR INTERCOMMUNICATION SET, VEHICULAR AN/VIC-3(V)1 (NSN 5830-01-395-4177) (EIC: NA) IN A TANK, COMBAT,
More informationProvider Portal User Guide
Provider Portal User Guide MyMSOncologyases.com MyMSRheumatologyases.com 1 ear Healthcare Office: nclosed is the user guide that you requested. Thank you for your interest in utilizing MyMSOncologyases.com
More informationWATERFRONT MAINTENANCE NOTE Number 13. MK 137 MODS 1,2, and 4 SRBOC Decoy Launching System Refurbishment
19 Nov 2015 SERMC CODE: 900 WATERFRONT MAINTENANCE NOTE Number 13 MK 137 MODS 1,2, and 4 SRBOC Decoy Launching System Refurbishment The following references are provided to assist ships force in preparation
More informationSiemens TEC Unit Vent 0-10V Output Controller. Accessories. Control Applications. Product Description. Product Numbers. Warning/Caution Notation
Document No. 540-1027 Siemens TEC Unit Vent 0-10V Output Controller Generic Controller I/O Layout. See Wiring Diagram for application specific details. Control Applications 2281, 2283, 2284, 2286, 2287
More informationGBH 24 VFR GBH 24 VRE
GBH 24 VFR-VRE - Vorderseite Seite 1 Mittwoch, 28. August 2002 2:38 14 Bedienungsanleitung Operating Instructions Instructions d emploi Instrucciones de servicio Manual de instruções Istruzioni d uso Gebruiksaanwijzing
More informationRG 102 Accreditation for the Inspection of Non-public High Voltage Electrical Systems
This publication contains policy, recommendations and guidance applicable to UKAS accredited inspection bodies RG 102 Accreditation for the Inspection of Non-public High Voltage Electrical Systems Contents
More informationEasylink to Liebert Sitelink Module
Document o. 58718 Easylink to iebert Sitelink Module PRODUCT DESCRIPTIO The Easylink Module mounts in an enclosure (P/ 58700, 115 Vac or P/ 58795, 0 Vac). Once installed, the Easylink Module is positioned
More information12500 TI Boulevard, MS 8640, Dallas, Texas 75243
12500 TI Boulevard, MS 8640, Dallas, Texas 75243 PCN# 20130116001 Qualification of RFAB and TI Clark as additional Fab site and Assembly site options for the DRV2603RUNx device Change Notification / Sample
More informationTM BD INTRODUCTION PAGE 1-1 TECHNICAL MANUAL ASSESSING BATTLEFIELD DAMAGE PAGE 2-1
INTRODUCTION PAGE 1-1 TECHNICAL MANUAL BATTLEFIELD DAMAGE ASSESSMENT AND REPAIR FOR ENVIRONMENTAL CONTROL UNIT (ECU) ASSESSING BATTLEFIELD DAMAGE PAGE 2-1 GENERAL REPAIR PAGE 3-1 ELECTRICAL SYSTEM PAGE
More informationF200DET 13 (6CD5) F225DET 13 (6CC5) F250CET 13 (6CB5)
F200DET 13 () F225DET 13 () F250CET 13 () 1M6CD-700E1 ( ) 2013/11/20 NEWS DATE COMMENT PE0-OM-130047 Oct.,29,2013 MOD:FIG.3,6 LIST/ILLUSTRATION REVISION PE0-OM-130050 Nov.,20,2013 COR:FIG.13 ILLUSTRATION
More informationNAWCWD Long Range Acquisition Forecast (LRAF) Requirements FY15 FY17
NAWCWD Long Range Acquisition Forecast (LRAF) Requirements FY15 FY17 Distribution Statement A Approved for public release, distribution is unlimited. File: NAVAIR Brief 1 Weapons Systems Integration and
More informationTECHNICAL MANUAL. DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimite.
TECHNICAL MANUAL OPERATOR S MANUAL GENERATOR SET SKID MOUNTED, TACTICAL QUIET 5 KW, 60 AND 400 HZ MEP-802A (60 HZ) 6115-01-274-7387 MEP-812A (400 HZ) 6115-01-274-7391 DISTRIBUTION STATEMENT A : Approved
More informationKey to BEDSIDE External Pulse Generator Controls and Features
Output Adjusts the voltage of the pacing pulse Rate Adjusts the frequency of the pacing pulses Low Battery Indicator Output Indicator ON/OFF Switches Flashes when batteries Flashes for Output Press Green
More informationOPERATOR S MANUAL GENERATOR SET, SKID MOUNTED, TACTICAL QUIET
AIR FORCE TO 35C2 3-444 11 MARINE CORPS TM 09244A/09245A 10/1 TECHNICAL MANUAL OPERATOR S MANUAL GENERATOR SET, SKID MOUNTED, TACTICAL QUIET 60 KW, 50/60 AND 400 HZ MEP-806A (50/60 HZ) 6115-01-274-7390
More information1. Introduction Features Installation... 5
Environmental Monitoring Device Installation Manual Revision: Date: Sep. 2012 Table of Contents 1. Introduction... 3 2. Features... 4 3. Installation... 5 3.1. With USHA Pro II...5 3.2. With USHA ProE
More informationRulemaking Hearing Rules of Department of Commerce and Insurance Division of Fire Prevention. Chapter Electrical Installations.
Page 1 of 6 pages Rulemaking Hearing Rules of Department of Commerce and Insurance Division of Fire Prevention Chapter 0780-02-01 Electrical Installations Amendments Rule 0780-02-01-.01 Scope is amended
More informationINDIAN ASSOCIATION FOR THE CULTIVATION OF SCIENCE 2A & 2B Raja S.C.Mullick Road Jadavpur, Kolkata
INDIAN ASSOCIATION FOR THE CULTIVATION OF SCIENCE 2A & 2B Raja S.C.Mullick Road Jadavpur, Kolkata 700032 Tender Notice No.: IACS/PC/BBD/WELLCOME-DBT/14/38 dated: 4.09.2014 Sub: Specification for CO2 Incubator
More informationTM * HEADQUARTERS, DEPARTMENT OF THE ARMY DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
* DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE TRUCK, FORKLlFT, DED PNEUMATIC TIRE, 10,000 LB. CAPACITY ROUGH TERRAIN, ARTICULATED FRAME STEER (DRESSER INDUSTRIES MODEL M10A, MHE 236) (NSN 3930-01-054-3833)
More informationIsolette TI500 Neonatal Transport
Isolette TI500 Neonatal Transport Transport neonates safely, comfortably and with a minimum of stress with a fully-featured, high-performance transport incubator. D-1587-2009 02 Isolette TI500 Benefits
More informationMEMORANDUM. According to the final ballot results, all ballot items received the necessary affirmative votes to pass ballot.
National Fire Protection Association 1 Batterymarch Park, Quincy, MA 02169-7471 Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.org MEMORANDUM To: NEC Code-Making Panel 11 From: Kimberly Shea, Project Administrator
More informationCONVENIENCE METAL FABRICATION ABRASIVES VENDING SOLUTIONS CORNER STORE RIGHT ON THE FLOOR
METAL FABRICATION ABRASIVES VENDING SOLUTIONS CORNER STORE CONVENIENCE RIGHT ON THE FLOOR Pre-selected product assortment for optimal coverage of popular applications Industry s best selection of abrasive
More informationGLI Standards Composite Submission Requirements Initial Release, Version: 1.0 Release Date: August 25, 2011
GLI Standards Composite Submission Requirements Initial Release, Version: 1.0 Release Date: This Page Intentionally Left Blank About These Requirements This document contains a composite view of all submission
More informationARMY DATA SHEETS FOR CARTRIDGES, CARTRIDGE ACTUATED DEVICES AND PROPELLANT ACTUATED DEVICES FSC 1377
TM 43-1-39 TECHNICAL MANUAL ARMY DATA SHEETS FOR CARTRIDGES, CARTRIDGE ACTUATED DEVICES AND PROPELLANT ACTUATED DEVICES FSC 1377 Approved for public release: distribution is unlimited. HEADQUARTERS, DEPARTMENT
More informationSubj: CHANGE OR EXCHANGE OF COMMAND OF NUCLEAR POWERED SHIPS. Encl: (1) Engineering Department Change of Command Inspection List
DEPARTMENT OF THE NAVY OFFICE OF THE CHIEF OF NAVAL OPERATIONS 2000 NAVY PENTAGON WASHINGTON, DC 20350-2000 OPNAVINST 5000.39C N133 OPNAV INSTRUCTION 5000.39C From: Chief of Naval Operations Subj: CHANGE
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-26 08 00 (August 2008) Change 1-02/15 --------------------------- Preparing Activity: NAVFAC Superseding UFGS-26 08 00 (April 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationTobyhanna Army Depot. Overview
CECOM/Tobyhanna Army Depot Tobyhanna Army Depot Overview 18 Oct 17 Daniel Petty Business Development Specialist D/Production Management Tobyhanna Army Depot Tobyhanna Army Depot Est. 1912 Mission AMC Depots
More information