Midwest OSHA Education Centers

Transcription

1 Midwest OSHA Education Centers OSHA Training Institute Courses Kirkwood Community College National safety council, greater Omaha Chapter St. Louis University

2 OSHA Training Institute Courses Midwest OSHA Education Centers In 2002, the Occupational Safety and Health Administration (OSHA) designated the Midwest OSHA Education Center (MOEC) consortium as an official training provider of the OSHA Training Institute Education Center (OTIEC) network. MOEC is a partnership between Kirkwood Community College, Cedar Rapids, Iowa; St. Louis University School of Public Health, St. Louis, Missouri; and the, Omaha, Nebraska. This partnership of programs provides a broad network of training resources that enables OSHA Region 7 to offer premium quality training and educational services. As OSHA Training Institute Education Centers, we work closely with OSHA to offer innovative local training based on regional needs and employment trends in the areas of occupational health and safety, environmental management, disaster and emergency response issues. Our education centers offer employers and their employees a wide array of top quality services and courses, seminars, distance learning opportunities and contract training programs. These programs can also be customized to best meet your organization s specific training needs. Training can be scheduled on-site at your workplace or at any of our Midwest OSHA Education Center sites. Continuing Education Units (CEUs) are available for all OSHA Training Institute courses. Midwest OSHA Education Centers Kirkwood Community College 6301 Kirkwood Blvd. SW Cedar Rapids, IA See last page for registration details St. Louis University School of Public Health 3545 Lafayette Ave. St. Louis, MO See last page for registration details M Circle Omaha, NE To register for classes, call or visit Kirkwood Community College is an equal access/equal opportunity institution in compliance with state and federal laws and does not discriminate on the basis of sex, race, color, creed, religion, national origin, age, disability, sexual orientation or marital status. The EEO officer is Bob Freeman. He is available for questions or information on the grievance procedure at

3 500 Trainer Course in OSHA Standards for Construction This course is designed for personnel in the private sector interested in teaching the 10- and 30-hour construction safety and health outreach programs to their employees and other interested groups. Special emphasis is placed on those topics that are required in the 10- and 30-hour programs as well as those that are the most hazardous using OSHA standards as a guide. Course participants are briefed on effective instructional approaches and the effective use of visual aids and handouts. This course allows the student to become a trainer in the Outreach Program, to conduct both a 10- and 30-hour construction safety and health courses, and to issue cards to participants verifying course completion. Prerequisites: OSHA 510 course and five years of construction safety experience. A college degree in occupational safety and health, a Certified Safety Professional (CSP) or Certified Industrial Hygienist (CIH) designation in the applicable training area may be substituted for two years of experience. ETOS-3000 / 4 sessions / $710 > 5437 Tue/Wed/Thu/Fri 8am-5pm Oct 12-Oct 15 > 4617 Tue/Wed/Thu/Fri 8am-5pm Oct 12-Oct 15 > Omaha Mon/Tue/Wed/Thu Oct 25-Oct 28 > 5439 Tue/Wed/Thu/Fri 8am-5pm Nov 9-Nov 12 Joplin Chamber of Commerce TBA > 5441 Tue/Wed/Thu/Fri 8am-5pm Dec 7-Dec 10 > Omaha Mon/Tue/Wed/Thu Jan 10-Jan 13 > 5444 Tue/Wed/Thu/Fri 8am-5pm Feb 8-Feb 11 > 4618 Tue/Wed/Thu/Fri 8am-5pm Feb 15-Feb 18 Kirkwood Community College Iowa City Learning Center C > Omaha Mon/Tue/Wed/Thu Apr 4-Apr 7 > 5445 Tue/Wed/Thu/Fri 8am-5pm Apr 26-Apr 29 > 5450 Tue/Wed/Thu/Fri 8am-5pm May 24-May 27 Poplar Bluffs TBA > 4621 Tue/Wed/Thu/Fri 8am-5pm May 24-May 27 > Omaha Mon/Tue/Wed/Thu Jul 18-Jul 21 > 5451 Tue/Wed/Thu/Fri 8am-5pm Jul 26-Jul Trainer Course in OSHA Standards for General Industry This course is designed for personnel in the private sector interested in teaching the 10- and 30-hour general industry safety and health outreach programs to their employees and other interested groups. Special emphasis is placed on those topics that are required in the 10- and 30-hour programs as well as those that are the most hazardous using OSHA standards as a guide. Course participants are briefed on effective instructional approaches and the effective use of visual aids and handouts. This course allows the student to become a trainer in the Outreach Program, to conduct both a 10- and 30-hour general industry safety and health courses, and to issue cards to participants verifying course completion. Prerequisites: OSHA 511 course and five years of general industry safety experience. A college degree in occupational safety and health, a Certified Safety Professional (CSP) or Certified Industrial Hygienist (CIH) designation in the applicable training area may be substituted for two years of experience. ETOS-3001 / 4 sessions / $710 > Omaha Mon/Tue/Wed/Thu Oct 11-Oct 14 > 5503 Tue/Wed/Thu/Fri 8am-5pm Nov 2-Nov 5 > 4605 Tue/Wed/Thu/Fri 8am-5pm Nov 9-Nov 12 > 5507 Tue/Wed/Thu/Fri 8am-5pm Jan 11-Jan 14 > Omaha Mon/Tue/Wed/Thu Jan 17-Jan 20 > 4607 Tue/Wed/Thu/Fri 8am-5pm Mar 8-Mar 11 > 5508 Tue/Wed/Thu/Fri 8am-5pm Mar 22-Mar 25 > Omaha Mon/Tue/Wed/Thu Apr 18-Apr 21 > 5513 Tue/Wed/Thu/Fri 8am-5pm May 10-May 13 Joplin Chamber of Commerce TBA > 5514 Tue/Wed/Thu/Fri 8am-5pm Jun 7-Jun 10 > 4626 Tue/Wed/Thu/Fri 8am-5pm Jun 14-Jun 17 > Omaha Mon/Tue/Wed/Thu Jul 25-Jul 28 > 5516 Tue/Wed/Thu/Fri 8am-5pm Aug 23-Aug Update for Construction Industry Outreach Trainers This course is designed for personnel in the private sector who have completed OSHA 500 Trainer Course in Occupational Safety and Health Standards for Construction, and who are active trainers in the Outreach Program. It provides an update on such topics as OSHA construction standards, policies and regulations. Prerequisites: OSHA 500 course. NOTE: Outreach trainers are required to attend this course once every four years to maintain their trainer status. Students must bring their current trainer s card for validation. ETOS-3002 / 3 sessions / $535 > Omaha Tue/Wed/Thu Oct 26-Oct 28 > 4619 Wed/Thu/Fri 8am-5pm Oct 27-Oct 29 Kirkwood Community Training & Response Center 126 > 5452 Wed/Thu/Fri 8am-5pm Dec 1-Dec 3 > Omaha Tue/Wed/Thu Jan 11-Jan 13 > 4620 Wed/Thu/Fri 8am-5pm Mar 2-Mar 4 > Omaha Tue/Wed/Thu Apr 5-Apr 7 > 5454 Tue/Wed/Thu 8am-5pm Apr 19-Apr 21 > 4622 Wed/Thu/Fri 8am-5pm Jun 1-Jun 3 > Omaha Tue/Wed/Thu Jul 19-Jul 21 > 5457 Wed/Thu/Fri 8am-5pm Jul 20-Jul 22 Midwest OSHA Education Centers Register online at 1

4 503 Update for OSHA Trainers in General Industry This course is designed for private sector personnel who have completed OSHA 501 Trainer Course in Occupational Safety and Health Standards for General Industry, and who are active trainers in the Outreach Program. It provides an update on OSHA general industry standards and OSHA policies. Prerequisites: OSHA 501 course. NOTE: Outreach trainers are required to attend this course once every four years to maintain their trainer status. Students must bring their current trainer s card for validation. ETOS-3003 / 3 sessions / $535 > 5443 Wed/Thu/Fri 8am-5pm Sep 29-Oct 1 > Omaha Tue/Wed/Thu Oct 12-Oct 14 > 4623 Wed/Thu/Fri 8am-5pm Nov 17-Nov 19 > 5446 Wed/Thu/Fri 8am-5pm Jan 5-Jan 7 > Omaha Tue/Wed/Thu Jan 18-Jan 20 > 5455 Wed/Thu/Fri 8am-5pm Mar 9-Mar 11 > 4624 Wed/Thu/Fri 8am-5pm Apr 13-Apr 15 > Omaha Tue/Wed/Thu Apr 19-Apr 21 > 4625 Wed/Thu/Fri 8am-5pm Jun 8-Jun 10 > Omaha Tue/Wed/Thu Jul 26-Jul Occupational Safety and Health Standards Construction Industry This course for private sector personnel covers OSHA policies, procedures and standards, as well as construction safety and health principles. Topics include scope and application of the OSHA construction standards. Special emphasis is placed on those areas that are the most hazardous, using OSHA standards as a guide. All participants must bring a current copy of the OSHA regulations 29 CFR 1926 to the course. This is a prerequisite to the OSHA 500 course. ETOS-3004 / 4 sessions / $710 > Omaha Mon/Tue/Wed/Thu Sep 27-Sep 30 > 5440 Tue/Wed/Thu/Fri 8am-5pm Oct 5-Oct 8 Joplin Chamber of Commerce TBA > 5448 Tue/Wed/Thu/Fri 8am-5pm Nov 16-Nov 19 > Omaha Mon/Tue/Wed/Thu Dec 13-Dec 16 > 4610 Tue/Wed/Thu/Fri 8am-5pm Dec 14-Dec 17 Kirkwood Community College Iowa City Learning Center C > 5459 Tue/Wed/Thu/Fri 8am-5pm Jan 25-Jan 28 > Omaha Mon/Tue/Wed/Thu Feb 7-Feb 10 > 5464 Tue/Wed/Thu/Fri 8am-5pm Mar 1-Mar 4 Poplar Bluffs TBA > 5468 Tue/Wed/Thu/Fri 8am-5pm Mar 29-Apr 1 > 4612 Tue/Wed/Thu/Fri 8am-5pm Apr 26-Apr 29 > 5474 Tue/Wed/Thu/Fri 8am-5pm May 17-May 20 > Omaha Mon/Tue/Wed/Thu Jun 13-Jun 16 > 5477 Tue/Wed/Thu/Fri 8am-5pm Aug 16-Aug Occupational Safety and Health Standards General Industry This course for private sector personnel covers OSHA policies, procedures and standards. Topics include scope and application of the OSHA regulation standards. Special emphasis is placed on those areas that are the most hazardous, using OSHA standards as a guide. All participants must bring a current copy of the OSHA regulations 29 CFR 1910 to the course. This is a prerequisite to the OSHA 501 course. ETOS-3005 / 4 sessions / $710 > Omaha Mon/Tue/Wed/Thu Sep 13-Sep 16 > 4613 Tue/Wed/Thu/Fri 8am-5pm Sep 21-Sep 24 > 5453 Tue/Wed/Thu/Fri 8am-5pm Oct 5-Oct 8 > Omaha Mon/Tue/Wed/Thu Dec 6-Dec 9 > 5456 Tue/Wed/Thu/Fri 8am-5pm Dec 14-Dec 17 > 4614 Tue/Wed/Thu/Fri 8am-5pm Jan 18-Jan 21 > Omaha Mon/Tue/Wed/Thu Feb 14-Feb 17 > 5458 Tue/Wed/Thu/Fri 8am-5pm Feb 22-Feb 25 > 5460 Tue/Wed/Thu/Fri 8am-5pm Mar 8-Mar 11 Joplin Chamber of Commerce TBA > 5461 Tue/Wed/Thu/Fri 8am-5pm Apr 12-Apr 15 > 4615 Tue/Wed/Thu/Fri 8am-5pm May 10-May 13 > Omaha Mon/Tue/Wed/Thu Jun 20-Jun 23 > 5462 Tue/Wed/Thu/Fri 8am-5pm Jul 12-Jul 15 2 Additional questions? Call our phone-in registration at or

5 521 Introduction to Industrial Hygiene This four-day course addresses the general concepts of industrial hygiene. Topics include recognizing common health hazards such as air contaminants and noise, hazard evaluation through screening and sampling, and control methods for health hazards including ventilation and personal protective equipment. 4 sessions / $ Health Hazard Awareness The goal of this course is to assist participants with recognizing potential health hazards in the workplace and avoiding, minimizing, controlling or eliminating them whenever possible. ETOS-3007 / 1 session / $50 > 4629 Mon 8am-5pm Feb 21 > 5471 Mon 8am-12pm Apr 4 > Omaha Mon/Tue/Wed/Thu Mar 14-Mar Guidelines for Ergonomics Training in Nursing Homes The focus of this one-day course is to use OSHA s Ergonomic Guidelines for Nursing Homes to develop a process to protect workers in nursing homes. This course will focus on analyzing and identifying ergonomic problems and practical solutions to address these problems. Topics include developing an ergonomics process, risk factors in the nursing home guidelines, identifying problem jobs including protocols for resident assessment, and implementing solutions including work practices and engineering solutions. 1 session / $180 / National Safety Council, Greater Omaha Chapter 7500 Developing an Effective Health and Safety Program The keys to an effective safety and health program include an on-site safety committee and a thorough job hazard analysis. Participants will learn a step-by-step procedure for forming and managing an effective safety committee. Other topics include program development, job hazard analysis, accident investigation, record keeping and reporting requirements. This course is designed for safety and health professionals, managers, team leaders and others responsible for developing workplace safety and health programs. ETOS-3008 / 1 session / $75 > 4627 Fri 8am-12pm Oct 8 > Omaha Wed Sep 8 > Omaha Wed Mar 9 > Omaha Wed Jul 13 > Omaha Wed Sep Introduction to Evacuation and Emergency Planning This course is an overview of requirements and considerations for developing an effective emergency action plan and evacuation plan for small businesses. The goal of this course is to increase the participant s knowledge of emergency planning and the features of good evacuation floor plans. ETOS-3006 / 1 session / $ Accident Investigation 8-hours This course provides an introduction to basic accident investigation procedures and describes accident analysis techniques. The goal of this course is to help participants gain the basic skills necessary to conduct an effective accident investigation at their workplace. ETOS-3009 / 1 session / $150 > 4628 Mon 8am-5pm Oct 11 > 5519 Mon 8am-5pm Nov 22 > 4616 Wed 8am-5pm Feb 2 Midwest OSHA Education Centers Register online at 3

6 Introduction to OSHA This course is for persons with little or no knowledge of OSHA regulations, but need this information because of their job responsibilities. Participants will be led stepby-step through the Code of Federal Regulations (29 CFR 1910). An explanation of the main standards and their application will be given. ETOS-3012 / 1 session / $75 > 4637 Thu 8am-12pm Sep 16 > 4638 Thu 8am-12pm Jan 13 OSHA General Industry Outreach Training 10-hours Participants will learn how the nine major provisions of the Occupational Safety and Health Act (OSHA) can be implemented in the workplace. Topics include common violations; inspections, citations and penalties; walking and working surfaces; means of egress and fire protection; hazardous materials; material handling; electrical safety; and machine guarding. This course is taught by an OSHA-authorized instructor. Participants who successfully complete the course will receive a 10-hour card from OSHA certifying completion of the course. ETOS-3013 / 2 sessions / $180 > 4653 Thu 8am-3pm, Fri 8am-12pm Oct 21-Oct 22 > 4654 Thu 8am-3pm, Fri 8am-12pm Feb 24-Feb 25 > 4655 Thu 8am-3pm, Fri 8am-12pm May 5-May 6 OSHA Construction Industry Outreach Training 10-hours This course covers construction safety and health principles, OSHA policies and procedures, and construction industry standards. Special emphasis is placed on the most hazardous areas, using OSHA standards as a guide. This course is taught by an OSHA-authorized instructor. Participants who successfully complete the course will receive a 10-hour card from OSHA certifying completion of the course. ETOS-3014 / 2 sessions / $180 > 4649 Thu 8am-3pm, Fri 8am-12pm Sep 30-Oct 1 > 4650 Thu 8am-3pm, Fri 8am-12pm Dec 9-Dec 10 > 4651 Thu 8am-3pm, Fri 8am-12pm Feb 3-Feb 4 > 4652 Thu 8am-3pm, Fri 8am-12pm May 19-May Machinery and Machine Guarding Standards This course familiarizes you with various types of common machinery and the related safety standards. Guidance is provided in respect to the hazards associated with the various kinds of machinery and the control in the hazardous energy sources (lockout/tagout). This four-day course presents an approach to machine inspection that enables you to recognize hazards such as those created by points of operation, rotating parts and flying chips, and provides options to achieve abatement. These hazards include mechanical motions and actions created by points of operation and other machinery processes. An introduction to robotics, hands-on training in the laboratory and a plant tour are included in the course. ETOS-5009 / 4 sessions / $710 > 5467 Tue/Wed/Thu/Fri 8am-5pm Dec 14-Dec 17 > 5473 Tue/Wed/Thu/Fri 8am-5pm Jun 14-Jun Respiratory Protection This course covers the requirements for the establishment, maintenance and monitoring of a respiratory program. Topics include terminology, OSHA standards, NIOSH certification and medical evaluation recommendations. Course highlights include laboratories on respirator selection, qualitative fit testing and the use of a large array of respiratory and support equipment for hands-on training. ETOS-5010 / 3-4 sessions / $710 > Omaha Wed/Thu/Fri Feb 23-Feb 25 ($680) > 5475 Tue/Wed/Thu/Fri 8am-5pm Jul 5-Jul Principles of Ergonomics Given the responsibility to evaluate the workplace, the student will assess the work environment for the prevention of work-related musculoskeletal disorders (WMSD). 4 sessions / $680 > Omaha Mon/Tue/Wed/Thu May 23-May 26 Custom Training Need training for your company? We can customize any of these courses to best meet your organization s specific needs. Training can be scheduled on-site at your workplace or at one of our facilities. For more information, contact us at or visit 4 Additional questions? Call our phone-in registration at or

7 2264 Permit-required Confined Space Entry This course is designed to enable students to recognize, evaluate, control and abate safety and health hazards associated with permit-required confined space entry. This course focuses on the specific requirements of 29 CFR (a)(1). Each paragraph of the standard is discussed with references to the OSHA directive letters of interpretation and preamble rationale. Technical topics include the recognition of confined space hazards, basic information about the instrumentation used to evaluate atmospheric hazards and general permit space ventilation techniques. This course features workshops on confined space classification permits and program evaluation. ETOS-5011 / 3 sessions / $580 > 5438 Mon/Tue/Wed 8am-5pm Nov 22-Nov 24 > 5442 Wed/Thu/Fri 8am-5pm Apr 6-Apr 8 > Omaha Mon/Tue/Wed Aug 15-Aug 17 ($680) 3010 Excavation, Trenching and Soil Mechanics This course focuses on OSHA standards and the safety aspects of excavation and trenching. Students are introduced to practical soil mechanics and its relationship to the stability of shored and unshored slopes and walls of excavations. Various types of shoring (wood timbers and hydraulic) are covered. Testing methods are demonstrated and a one-day field exercise is conducted, allowing students to use instruments such as penetrometers, torvane shears and engineering rods. ETOS-5012 / 3 sessions / $580 > 5469 Wed/Thu/Fri 8am-5pm Feb 16-Feb 18 > 5472 Wed/Thu/Fri 8am-5pm Mar 16-Mar 18 > 5476 Wed/Thu/Fri 8am-5pm Sep 7-Sep Electrical Standards This course is designed to provide the student with a survey of OSHA s electrical standards and the hazards associated with electrical installations and equipment, grounding, ground fault circuit interrupters and safety-related work practices. Emphasis is placed on electrical hazards recognition and OSHA inspection procedures. Hands-on training is provided using various types of electrical test equipment. Prerequisites: All OSHA personnel must have completed course (d). State consultants: OSHA 1500 Basic On-site Consultation program. Other federal agency or department personnel: OSHA 6000 or 6010 courses. Private sector and other non-federal government personnel: OSHA 511 course. This course is available to noncompliance personnel only. ETOS-5013 / 4 sessions / $680 > 5479 Tue/Wed/Thu/Fri 8am-5pm Dec 14-Dec 17 > 5482 Tue/Wed/Thu/Fri 8am-5pm Jun 21-Jun Fall Arrest Systems This course provides an overview of the state-of-the-art technology for fall protection and current OSHA requirements. Topics covered include the principles of fall protection, the components of fall arrest systems, the limitations of fall arrest equipment and OSHA policies regarding fall protection. This course features a one-day field exercise demonstrating fall protection equipment. Prerequisites: 21(d) state consultants: OSHA 510 course and OSHA 1500 Basic On-site Consultation program. Other federal agency or department personnel: OSHA 510 and OSHA 6000 or 6100 courses. Private sector and other non-federal government personnel: OSHA 510 course. ETOS-5014 / 3 sessions / $580 > 5447 Mon/Tue/Wed 8am-5pm Nov 29-Dec 1 > 5449 Wed/Mon/Tue 8am-5pm Jun 15-Jun Disaster Site Worker Train-the-Trainer Experienced trainers will learn to present the Disaster Site Worker Course (OSHA 7600). Learn to apply elements of successful training programs and practice knowledge, skills and attitudes through discussion, exercises and presentations. This course includes lesson plans, training materials, and information on training techniques and resources. There will be student presentations of select portions of the Disaster Site Worker Course. Prerequisite: OSHA 500 and 501 courses, three years safety training experience and completion of the 40-hour HAZWOPER training. $680 / Call for dates Collateral Duty for Other Federal Agencies This course introduces federal agency collateral duty (part-time) safety and health personnel to the OSHA Act, Executive Order 12196, 29 CFR 1969 and 29 CFR It enables them to recognize basic safety and health hazards in their own workplaces and to effectively assist agency safety and health officers in their inspection and abatement efforts. The course features a mock inspection of a government facility. ETOS-5016 / 4 sessions / $680 > 5466 Tue/Wed/Thu/Fri 8am-5pm Mar 15-Mar 18 > Omaha Mon/Tue/Wed/Thu May 9-May 12 Midwest OSHA Education Centers Register online at 5

8 7100 Introduction to Machinery and Machine Guarding This one-day course is designed to increase the participant s knowledge and skills in proper machine safeguarding techniques and to highlight the benefits of guarding various types of machinery. The target audience is the small employer, business owner or supervisor designated with the responsibility to develop a machine-safeguarding program. This training is also suitable for anyone who works with or around machinery and machine guarding. ETOS-5018 / 1 session / $180 > Omaha Thu Mar 2 > 5483 Mon 8am-5pm Mar Bloodborne Pathogens Control for Health Care Facilities The purpose of this one-day course is to develop a bloodborne pathogens exposure plan for health care facilities using a step-by-step approach. Featured topics include an introduction to the bloodborne pathogens standard, the exposure control plan, methods of control, vaccinations and evaluations, training, and information and record keeping. ETOS-5020 / 1 session / $180 > Omaha Thu Sep 9 > 5481 Mon 8am-5pm Feb 21 > Omaha Thu Mar 10 > Omaha Thu Jul 14 > Omaha Thu Sep Understanding OSHA Confined Space Rules This one-day course discusses the requirements of OSHA s permit-required confined space standard 29 CFR It is designed for small employers or designated representatives (line supervisors or managers) with the responsibility to develop a permit space program. It covers OSHA s requirements but does not feature the hands-on sections (instrumentation, control methods and testing) that are included in OSHA 2260 course. ETOS-5022 / 1 session / $180 > Omaha Thu Mar 3 > 5478 Mon 8am-5pm Jun Fall Hazard Awareness for the Construction Industry This course provides small construction employers and employees with information on recognizing potential fall hazards and methods to control or eliminate these hazards. It focuses on falls to lower levels rather than falls from slips and trips. ETOS-5023 / 1 session / $180 > 5485 Mon 8am-5pm Oct 25 > 5498 Mon 8am-5pm Mar Managing Excavation Hazards This course presents the importance of and the requirements involving excavation competent persons. Topics include discussion of OSHA s excavation standard, excavation hazards, soil analysis techniques, protective system requirements and emergency response. ETOS-5024 / 1 session / $180 > 5484 Mon 8am-5pm Dec 20 > Omaha Tue Feb 22 > Omaha Thu Sep Developing an Effective Safety and Health Program The keys to an effective safety and health program include an on-site safety committee and a thorough job hazard analysis. Participants will learn a step-by-step procedure for forming and managing an effective safety committee. Other topics include program development, job hazard analysis, accident investigation, record keeping and reporting requirements. This course is designed for safety and health professionals, managers, team leaders and others responsible for developing workplace safety and health programs. ETOS-5025 / 1 session / $180 > 5490 Wed 8am-12pm Jan 19 > Omaha Thu May 5 > 5495 Mon 8am-12pm Jul Introduction to Accident Investigation This course provides an introduction to basic accident investigation procedures and describes accident analysis techniques. The goal of this course is to help participants gain the basic skills necessary to conduct an effective accident investigation at their workplaces. Topics include the primary reasons for conducting an accident investigation, employer responsibilities related to workplace accident investigations and a six-step accident investigation procedure. This course is set up as a facilitated, interactive training session focusing on class discussion and group activities. ETOS-5026 / 1 session / $180 > 5499 Mon 8am-5pm May 9 6 Additional questions? Call our phone-in registration at /

9 7845 OSHA Record Keeping This four-hour course is designed to assist employers in identifying and fulfilling their responsibilities for posting certain records, maintaining records of illness and injuries, and reporting specific cases to OSHA. Topics include what needs to be reported and the forms to be aware of. Several practice sessions are included. ETOS-5028 / 1 session / $95 > 5463 Mon 8am-12pm Oct 4 > 4630 Mon 8am-12pm Nov 15 > 5470 Mon 8am-12pm Dec 13 > 5480 Mon 8am-12pm Mar 7 > Omaha Fri May 6 > 4631 Mon 8am-12pm May Construction Industry Requirements: Awareness and Prevention Strategies This course provides federal employees with pertinent information regarding OSHA requirements and guidelines applicable to construction industry activities and operations. The goal of this course is to help participants gain an awareness level necessary to be able to describe major construction hazards and prevention strategies. Topics include the recognition of major safety and health hazards in the construction industry, prevention strategies that include safety and health management systems, OSHA requirements and guidelines, and resources available. ETOS-5029 / 2 sessions / $225 > 5465 Thu/Fri 8am-5pm Jan 20-Jan Industrial Warehouse Safety This course is designed as a training course for warehouse workers and focuses on the many hazards and injuries that are likely to be encountered in warehouse operations. It has been shown that warehousing has become an increasingly hazardous area to work in. OSHA has identified public storage and warehousing as one of seven industries with a high lost times claims rate. Injuries may occur from forklifts, material handling and lifting, exposure to hazardous substances, and slips, trips and falls. This course will discuss powered industry trucks, material handling/lifting/ergonomics, hazard communication, waling and working surfaces, exit routes and fire protection. ETOS-5030 / 1 session / $180 > 5502 Mon 8am-5pm Mar 14 Midwest OSHA Education Centers Instructor Profiles AJ Gajdosik, CSP, ARM-P AJ is a graduate of Central Missouri State University with a B.S. in safety management. AJ has safety experience in the construction, manufacturing and agriculture industries. He has earned his certified safety professional designation as well as associate degrees in risk management and risk management for public entities. AJ is also an instructor trainer in CPR, first aid and safety for the American Red Cross, and is authorized to teach both construction and general industry OSHA outreach training classes. AJ currently works full time for Amerisure Insurance as a senior loss control consultant. Christopher J. Burgoyne A graduate of Iona College with a bachelor s degree in business administration, Christopher is an authorized OSHA construction outreach trainer, an authorized OSHA general industry outreach trainer and recently completed the lead abatement supervisor course. His extensive experience includes leading roles in businesses as president and vice president, where he was responsible for product training and staff management. He has worked in the education field as the director of education for Independent Electrical Contractors, and currently works as a substitute teacher for the Saint Charles, Missouri School District. Gregory T. Smith Gregory is a graduate of Iowa State University, where he earned his B.S. in occupational safety, a graduate certificate of public management and a master s degree of public administration. His education also includes an associate of science degree in fire science technology from Des Moines Area Community College. Gregory has experience as a safety director, as well as experience as an industrial hygienist. He is one of four battalion chiefs for the Cedar Rapids Fire Department and a volunteer firefighter for the Marion Fire Department. Gregory also serves as an adjunct instructor for Kirkwood Community College. Midwest OSHA Education Centers Register online at 7

10 Occupational Safety and Health Specialist Certificate Program The occupational safety and health specialist certificate program consists largely of courses developed by the Occupational Safety and Health Administration s OSHA Training Institute, and requires a minimum of 210 hours of course contact hours. Individual courses are offered at each of the Midwest OSHA Education Center consortium locations (Kirkwood Community College, St. Louis University School of Public Health and the National Safety Council, Greater Omaha Chapter) and are also accepted from other regional National Safety Council affiliates (Iowa-Illinois Safety Council and St. Louis Safety Council). We will recognize some classes taken from Metropolitan Community College in Kansas City, Iowa State University in Ames, Iowa and Barton Community College in Kansas. A minimum of five years experience in either construction or general industry is required for admission to the OSHA 500 or OSHA 501 trainer courses. Contact any of our three centers for details on this new program. General Industry Safety and Health Specialist Required Courses (minimum 128 hours) OSHA 511 Safety and Health Standards for General Industry (32 hours) OSHA 501 Trainer Course for General Industry (32 hours) OSHA 3950 Electrical Standards (32 hours) OSHA 521A Introduction to Industrial Hygiene (32 hours) NSC Principles in Occupational Safety and Health POSH (32 hours National Safety Council class) Elective Courses (minimum of 82 hours) OSHA 2015 Hazardous Materials (32 hours) OSHA 2045 Machine and Machine Safeguarding (32 hours) OSHA 2225 Respiratory Protection (32 hours) OSHA 2250 Principles of Ergonomics (32 hours) OSHA 2264 Permit Required Confined Space Entry (24 hours) OSHA 3110 Fall Arrest Systems (24 hours) OSHA 7100 Introduction to Machinery and Machine Guarding (8 hours) OSHA 7200 Bloodborne Pathogens (8 hours) OSHA 7500 Introduction to Safety and Health Management (8 hours) NSC Safety and Health Management Techniques (30 hours) Construction Safety and Health Specialist Required Courses (minimum 128 hours) OSHA 510 Safety and Health Standards for Construction (32 hours) OSHA 500 Trainer Course for the Construction Industry (32 hours) OSHA 3110 Fall Arrest Systems (28 hours) NSC Principles of Occupational Safety and Health POSH (32 hours National Safety Council class) CEET 403 Hazardous Waste Operations and Emergency Response (40 Hours) Elective Courses (minimum 82 hours) OSHA 2015 Hazardous Materials (32 hours) OSHA 2045 Machine and Machine Safeguarding (32 hours) 2225 OSHA Respiratory Protection (32 hours) 2250 OSHA Principles of Ergonomics (32 hours) 2264 OSHA Permit Required Confined Space (24 hours) OSHA Introduction to Industrial Hygiene (32 hours) OSHA 3950 Electrical Standards (32 hours) OSHA 5600 Disaster Site Worker Train-the-Trainer (30 hours) OSHA 7500 Introduction to Safety and Health Management (8 hours) OSHA 7100 Introduction to Machine and Machine Safeguarding (8 hours) OSHA 7400 Construction Hearing Conservation Trainer (6 hours) OSHA 7500 Introduction to Safety and Health Management (8 hours) NSC Safety Management Techniques (30 hours National Safety Council) 8 Additional questions? Call our phone-in registration at or

11 To register for Omaha classes, call or visit Register Now! With four easy ways to register. Many Classes Have Limited Seating. Register Early! By Phone Tell Our Operators: 1. The class numbers from this catalog. 2. Your credit card/debit card number and expiration date. By Mail: 1. Fill out the enclosed enrollment form and credit card/debit card number, or enclose check. 2. For company billings, please include name, address, phone number and appropriate signature. Make Check Payable to Kirkwood Community College: 1. Pay the amount under tuition only. 2. Write name of person and class number on check. 3. Send to: Continuing Education, Kirkwood Community College P.O. Box 2068 Cedar Rapids, IA Registration Information or Payment must be made at the time of registration. MasterCard, VISA or Discover Card accepted. Online: Log on to By Fax Fax enclosed enrollment form with credit card/debit card number or company billing information. Refunds: An automatic refund is made if Kirkwood cancels a class. To withdraw your registration before a class starts, please call or Refunds will be issued to students who drop the class at least one day prior to the class start date. No refunds will be issued for classes dropped on or after the class start date. Kirkwood Community College Continuing Education is pleased to welcome learners of all ages. However, learners under the age of 17 wishing to enroll in non-youth courses should seek permission from the program director. Please phone Sex: Male Female Name Last First Middle Initial Address City State ZIP Phone: Day Night Date of Birth Course(s) Title Social Security Number Title Class No. Tuition $ Class No. Tuition $ Title Title Class No. Tuition $ Class No. Tuition $ Paying by Credit Card: (please circle) MasterCard Visa Discover Credit Card No. Exp. Date Your Signature Date Agency/Company Billing (We do not bill individuals, please list sponsoring agency): Date 20 Agency/Company Nine-digit EIN number Address Individual Granting Approval Phone Student Signature (required) Authorized Company Signature (required) Any fees unpaid at the end of the class will revert back to the student s account and he/she will be held accountable. The student will not receive CEU s or transcripts and will not be allowed to register until the account is paid in full. Please note: Under the Federal Right to Privacy Act, Kirkwood Community College Continuing Education cannot disclose any student information without the written consent (a separate form) of the student.

12 Non-Profit Organization U.S. Postage PAID Cedar Rapids, Iowa Permit No Kirkwood Blvd. SW PO Box 2068 Cedar Rapids, Iowa Midwest OSHA Education Centers OSHA Training Institute Courses 10 Additional questions? Call our phone-in registration at or