Course Descriptions. ENG 101 (3) Course ID: Writing I. Attributes: WC - Written Communication Campus: BLC

Transcription

1 Course prefix/number arranged alphabetically. The course number will appear as 101 ENG on transcripts, student schedules and webbased documents. Course Credit. Variable credit is shown as (1-3). Unique course identification Course Title Course Description summarizes course content. May include information on course components, prerequisites/co-requisites, and other course stipulations. ENG 101 (3) Course ID: Writing I A course in writing emphasizing argument. Instruction and practice in reading critically, thinking logically, responding to texts, developing research skills, writing substantial essays through systematic revision, addressing specific audiences, and expressing ideas in standard and correct English. Includes grammar and mechanics review. NOTES: (a) credit not available by special examination; (b) ENG 101 and ENG 102 may not be taken concurrently. Attributes: WC - Written Communication Campus: Course may be offered only by identified campus. Attributes: Indicates the general education category and tag of the course, if applicable. Components: Course may have one component or several - lecture, laboratory, clinical, etc. Courses are numbered as follows: 001 through 099 Orientation and developmental courses 100 through 199 Undergraduate credit 200 through 299 Undergraduate credit; sophomore classification may be required. Modular courses have four character course numbers with the first three numbers representing the parent course, e.g., BAS 1601 is the first module of BAS 160. The last character denotes the sequence of the module with either a numerical or alpha character. Course descriptions are published for recently approved courses, and those that have been offered in the preceding two-year period. Other active courses may be offered that are not published in the printed catalog. A&S Art & Sciences A&S 100 (1-6) Course ID: Special Introductory Course This course permits the offering at the introductory level of special courses of an interdisciplinary, topical, or experimental nature. Each proposal must be approved by the Dean of the College of Arts and Sciences. A particular title may be offered at most twice under the A&S 100 number. Students may not repeat under the same title. May be repeated to a maximum of 12 credits. Prerequisite: Will be set by instructor. AAD Arts Administration AAD 200 (3) Course ID: Fundamentals of Arts Administration Arts administration, planning, evaluation, funding and finance in arts organizations are emphasized. Students are engaged in arts management projects related to career goals. Lecture: 3 credits (45 contact Prerequisite: AAD 100, ENG 102. ACC Accounting ACC 201 (3) Course ID: Financial Accounting Presents generally accepted accounting principles used for the measurement and reporting of financial information in the financial statements. Prerequisite: Sophomore standing (30 credit hours) or consent of the instructor. Lecture: 3 credits (45 contact ACC 202 (3) Course ID: Managerial Accounting An introduction to the use of accounting data within an organization to analyze and solve problems and to make planning and control decisions. Prerequisite: ACC 201 or ACT 101 and ACT 102. Lecture: 3 credits (45 contact hours) ACC 2011 (1) Course ID: Financial Accounting-Accounting as an Information System Presents the accounting cycle and preparation of financial statements. Prerequisite: Sophomore Standing (30 credit hours) or Consent of Instructor. Lecture: 1 credit (15 contact ACC 2012 (1) Course ID: Financial Accounting-Accounting for Merchandising Businesses Presents accounting for merchandising businesses including inventories, receivables and internal control. Prerequisite: Sophomore Standing (30 credit hours) or Consent of Instructor. and ACC 2011 or equivalent. Lecture: 1 credit (15 contact ACC 2013 (1) Course ID: Financial Accounting-Long Term Assets and Long Term Financing Activities Presents measuring and reporting of long term assets and long term financing activities. Prerequisite: Sophomore Standing (30 credit hours) or Consent of Instructor ACC 2011 and ACC 2012 or equivalent. Lecture: 1 credit (15 contact ACC 2021 (1) Course ID: Cost Terms Concepts, and Classifications Introduces the student to managerial accounting, differentiates between financial and managerial accounting, and presents cost and cost behaviors. Prerequisite: ACC 201 or (ACT 101 and ACT 102). Lecture: 1 credit (15 contact ACC 2022 (1) Course ID: Planning and Control Presents performance evaluation, and methods of financial statement analysis. Prerequisite: ACC Lecture: 1 credit (15 contact ACC 2023 (1) Course ID: Using Cost Data in Decision Making Introduces the student to master and capital budgets. Prerequisite: ACC Lecture: 1 credit (15 contact ACH Architecture ACH 100 (3) Course ID: Construction Documents I This is the first course of a four-semester studio sequence. Proper methods and fundamentals of architectural construction documents and residential construction will be introduced. Drafting conventions utilizing basic hand drafting tools and computer-aided drawing techniques will be studied. Lecture: 2 credits (30 contact hours): Laboratory: 1 credit (45 contact ACH 110 (1) Course ID: Survey of the Architectural Profession In this course, the student will gain an understanding of the language of architecture and develop an appreciation for building design strategies through direct analysis. In addition, various career opportunities in architecture and related professions will be explored. Lecture: 1 credit (15 contact ACH 120 (3) Course ID: Theory and History of Architecture I The development of architecture as it is related to world culture with an emphasis on design, structure, materials, eco-social, and political factors are considered. Lecture: 3 credits (45 contact 221

2 ACH 150 (3) Course ID: Construction Documents II This is the second course of a four-semester studio sequence. Students develop architectural construction documents for multi-level framed construction. Students will further develop an understanding of programming, schematics, design development, and construction document production using current computer-aided technology. Emphasis will be placed on building codes and related discipline coordination. Lecture: 2 credits (30 contact hours): Laboratory: 1 credit (45 contact Prerequisite: ACH 100 or consent of instructor. ACH 160 (3) Course ID: Building Materials and Construction I The essentials of the theory of selected building materials (Construction Specifications Institute, Divisions 2-7) and their assembly in appropriate systems are presented with particular attention to component selection and behavior under various loads, climatic conditions and fire. Lecture: 3 credits (45 contact ACH 161 (3) Course ID: Building Materials and Construction II The essentials of the theory of selected building materials (Construction Specifications Institute, Divisions 7-16) and their assembly in appropriate systems are presented with particular attention to component selection and behavior under various loads, climatic conditions and fire. Lecture: 3 credits (45 contact ACH 170 (3) Course ID: Theory and History of Architecture II A survey of the architectural periods from the neo-classic to the present is presented. This course is a continuation of ACH 120. Lecture: 3 credits (45 contact ACH 175 (3) Course ID: Introduction to Systems An overview of the various systems found in buildings and the influences that shape architectural design and construction is presented. Lecture: 3 credits (45 contact ACH 180 (1-3) Course ID: Selected Topics in Architectural Technology (Topic) The subject matter of this course may vary from semester to semester as new technology is developed and new issues evolve and/or to address local architectural issues. This course may be repeated with different topics to a maximum of six credit hours. Prerequisite: Consent of instructor. Lecture: 1-3 credits (15-45 contact ACH 194 (3) Course ID: Visual Composition In this course, the student will study the aesthetic principles found in both two-dimensional and three-dimensional compositions. These principles will be applied in exercises involving drawing, model construction and creative writing. Lecture: 1 credit (15 contact hours): Laboratory: 2 credits (120 contact ACH 195 (3) Course ID: Computer Aided Drafting I Students learn how computer hardware and software are used in preparing architectural documents. Lecture: 2 credits (30 contact hours); Laboratory: 1 credit (45 contact ACH 200 (3) Course ID: Construction Documents III This is the third course of a four-semester studio sequence. Students study the methods by which commercial buildings are designed and constructed. Basic skills are developed relating to the implementation of determinants in this process such as program analysis, applicable codes, construction methods and materials as well as computer applications. Through the completion 222 of a series of structured projects including the preparation of a set of architectural construction documents for a medium-sized building, students apply the knowledge necessary to achieve these goals. Lecture: 2 credits (30 contact hours): Laboratory: 1 credit (45 contact Prerequisite: ACH 150 and ACH 185/ACH 195 or consent of instructor. ACH 225 (3) Course ID: Structures Students study structural materials and systems including the design of simple structural components. Prerequisite: ACH 175 and MAH 125, or consent of instructor. ACH 250 (3) Course ID: Construction Documents IV This is the fourth course of a four-semester studio sequence. Students prepare a set of advanced construction documents using current computer-aided drafting techniques. Emphasis will be placed on design principles and site development for a commercial construction project. Lecture: 2 credits (30 contact hours): Laboratory: 1 credit (45 contact Prerequisite: ACH 200 or consent of instructor. ACH 260 (3) Course ID: Office Practice This course is intended to serve as a capstone course in the Architectural Technology program. Emphasis is placed on preparing students for the workplace by focusing on the professional, legal, and business aspects of the architectural and construction industries. Case studies are reviewed and projects are prepared by students with the goal of introducing them to a broader set of circumstances that affect how decisions are made in the practice of architecture. Lecture: 3 credits (45 contact Prerequisite: ACH 110 and ACH 200 or equivalent. ACH 275 (3) Course ID: Mechanical and Electrical Systems Students engage in a qualitative and quantitative study of environmental control systems used in buildings. Prerequisite: ACH 175 and MAT 125, or consent of instructor. Lecture: 3 credits (45 contact ACH 285 (3) Course ID: Computer-Aided Drafting II Students learn how to modify selected computer aided drafting software to enhance construction document production. Integration of other software will also be discussed. Prerequisite: ACH 185 or consent of instructor. Lecture: 3 credits (45 contact ACH 290 (3) Course ID: Building Codes I Students will analyze the content and format of current building codes. The necessity for building codes, problems in interpretation and application as well as legal aspects will be discussed. The main objective is to familiarize students with the basic provisions and procedures associated with building code administration. Prerequisite: ACH 150 and ACH 160, or consent of instructor. Lecture: 3 credits (45 contact ACH 291 (3) Course ID: Construction Management Students examine the principles and current practices of construction management with emphasis on project organization, scheduling and cost control. Prerequisite: ACH 150, ACH 160 and ACH 161, or consent of instructor. Lecture: 3 credits (45 contact ACH 292 (3) Course ID: Building Codes II This course will be continuation of ACH 290, Building Codes I, with a more in-depth study of current building codes. Prerequisite: ACH 290 or consent of instructor. Lecture: 3 credits (45 contact ACH 293 (3) Course ID: Presentation Techniques Students will explore a variety of presentation and rendering techniques used in the architectural profession. Design skills and the understanding of spatial relationships will be further developed. Prerequisite: ACH 100 or consent of instructor. Lecture: 2 credits (30 contact hours); Laboratory: 1 credit (45 contact ACH 294 (3) Course ID: Specification Writing This course provides an in-depth study of the importance of specifications in the design and construction process. Students will engage in research, evaluate the quality of building materials, study the methods of writing specifications, and gain exposure to industry-standard software in preparing a variety of specifications. Prerequisite: ACH 150, ACH 160, ACH 161, or consent of instructor. Lecture: 3 credits (45 contact ACH 295 (3) Course ID: Computer Aided Drafting II Students learn how to modify selected computer aided drafting software to enhance construction document production. Integration of other software will also be discussed. Prerequisite: ACH 195 or consent of instructor. Lecture: 3 credits (45 contact ACH 297 (3) Course ID: Estimating Techniques Students investigate the factors affecting the cost of construction, labor productivity, materials, overhead and profit, including area and volume computations. Current methods of cost estimating will be applied. Prerequisite: ACH 150 and MAT 125; or consent of instructor. Lecture: 2.5 credits (37.5 contact hours); Laboratory: 0.5 credits (7.5 contact ACH 298 (3) Course ID: Computer 3D Modeling Students learn how computer hardware and software are used in preparing 3D architectural drawings and clientoriented presentations. Prerequisite: ACH 150 and ACH 185 or consent of instructor. ACR Air Conditioning and Refrigeration ACR 100 (3) Course ID: Refrigeration Fundamentals Introduces refrigerant piping and fundamentals of refrigeration including environmental issues associated with HVAC. Corequisite: ACR 101. Lecture: 3 credits (45 contact ACR 101 (2) Course ID: Refrigeration Fundamentals Lab Introduces fundamentals of refrigeration including environmental issues associated with HVAC and refrigerant piping. Develops proper hands-on techniques in the servicing and troubleshooting of basic systems. Stresses proper use and care of tools, equipment, materials, and safety. Corequisite: ACR 100. Laboratory: 2 credits (60 contact ACR 102 (3) Course ID: HVAC Electricity Introduces students to basic physics of electricity. Covers Ohm s law; measuring resistance, voltage, ohms, watts and amps; constructing various types of electrical circuits; selecting wire and fuse sizes; and troubleshooting an electric motor and motor controls. Corequisite: ACR 103. Lecture: 3 credits (45 contact ACR 103 (2) Course ID: HVAC Electricity Lab Introduces students to basic physics of electricity. Provides for application of Ohm s law; and measure resistance, voltage, ohms, watts and amps; construct various types

3 of electrical circuits; select wire and fuse sizes; and learn to troubleshoot an electric motor and motor controls. Corequisite: ACR 102. Laboratory: 2 credits (60 contact ACR 112 (3) Course ID: Sheet Metal Fabrication The student will learn to make patterns and lay out and construct common sheet metal duct fittings. Corequisite: ACR 113. ACR 113 (2) Course ID: Sheet Metal Fabrication Lab Provides lab time for students to lay out, cut, construct, and install common sheet metal duct fittings. Corequisite: ACR 112. Laboratory: 2 credits (60 contact ACR 130 (3) Course ID: Electrical Components Defines the electrical components of an air conditioning system. Includes different types of line voltages, wiring diagrams and solid state devices. Emphasizes safety. Prerequisite: ACR 102 with a grade of C or greater. Corequisite: ACR 131. Lecture: 3 credits (45 contact ACR 131 (2) Course ID: Electrical Components Lab Permits practice using different types of line voltages, reading wiring diagrams, and using solid state devices. Emphasizes safety. Prerequisite: ACR 102 with a grade of C or greater. Corequisite: ACR 130. Laboratory: 2 credits (60 contact ACR 170 (3) Course ID: Heat Load/Duct Design Introduces fundamentals needed to calculate heat gain and heat loss, thereby determining air conditioner/furnace size which will be used to calculate the correct duct size. Lecture: 3 credits (45 contact ACR 198 (2) Course ID: Practicum Practicum provides supervised on-the-job work experience related to the student s educational objectives. Students participating in Practicum do not receive compensation. Prerequisite: Permission of the Instructor. Components: Practicum ACR 199 (2) Course ID: Cooperative Education Program Co-op provides supervised on-the-job work experience related to the student s educational objectives. Students participating in the Cooperative Education program receive compensation for their work. Prerequisite: Permission of the Instructor. Components: Co-Op ACR 200 (3) Course ID: Commercial Refrigeration Develops techniques for servicing and troubleshooting mechanical and electro-mechanical refrigeration components. Emphasizes electrical and refrigeration safety. Covers proper tool use and environmentally sound refrigerant handling. Prerequisite: (ACR 100 and ACR 101) with a grade of C or greater. Corequisite: ACR 201. Lecture: 3 credits (45 contact ACR 201 (2) Course ID: Commercial Refrigeration Lab Provides techniques in servicing and troubleshooting mechanical and electro-mechanical refrigeration components. Emphasizes electrical and refrigeration safety. Covers proper tool use and environmentally sound refrigerant handling. Prerequisite: (ACR 100 and ACR 101) with a grade of C or greater. Corequisite: ACR 200. Laboratory: 2 credits (60 contact ACR 206 (5) Course ID: Boilers Develops techniques for servicing, troubleshooting and performing preventive maintenance on steam generating systems. Emphasizes electrical and steam safety. Covers proper tool and instrument use and practices for the efficient applications on steam systems used in commercial and industrial settings. Pre-requisite: ACR 102 and ACR 103. Lecture/Lab: 5.0 credits (105 contact ACR 207 (5) Course ID: Commerical HVAC Systems Develops techniques for servicing, troubleshooting and performing preventive maintenance on commercial HVAC systems. Emphasizes electrical and mechnical safety. Covers tools and instruments used in installing, troubleshooting, and preforming preventive maintaince on commercial HVAC systems. Pre-requisite: (ACR 100 and ACR 101 and ACR 102 and ACR 103) or Consent of the Instructor. Lecture/Lab: 5.0 credits (105 contact ACR 208 (4) Course ID: Chillers Develops techniques for servicing, troubleshooting and performing preventive maintenance on high-pressure, low-pressure and absorption chilled water systems. Emphasizes electrical and safety. Covers proper tool and instrument use and practices for the efficient applications on chilled water systems used in commercial and industrial settings. Pre-requisite: ACR 100 and ACR 102 and ACR 103. Lecture/Lab: 4.0 credits (75 contact hours) ACR 209 (4) Course ID: Manual N Commercial Load Calculation and Design Covers fundamentals needed to calculate heat gain and heat loss for commercial buildings. Introduces design conditions, solar heat gain, ventilation, internal heat gains, psychrometrics and distribution systems for air conditioning and heating, thereby determining the correct size of equipment needed for different commercial buildings. Lecture: 4.0 credits (60 contact ACR 210 (3) Course ID: Ice Machines Introduces operation, checking, adjusting and troubleshooting commercial ice makers. Covers adjusting, checking, cleaning and troubleshooting commercial ice machines. Prerequisite: (ACR 100 and ACR 102) with a grade of C or greater. Lecture: 3 credits (45 contact ACR 250 (3) Course ID: Cooling and Dehumidification Explains working characteristics of air conditioning units with air and water cooled condensers. Covers line, low voltage and pneumatic controls. Prerequisite: (ACR 100 & ACR 101) with a grade of C or greater. Corequisite: ACR 251. Lecture: 3 credits (45 contact ACR 251 (2) Course ID: Cooling and Dehumidification Lab Prepares the student for installing, servicing, and troubleshooting air conditioning systems with water and air cooled condensers and line and low voltage. Prerequisite: (ACR 100 & ACR 101) with a grade of C or greater. Corequisite: ACR 250. Laboratory: 2 credits (60 contact ACR 260 (3) Course ID: Heating and Humidification Explains heating systems from simple fossil fuel furnaces through more complex systems. Concentrates on line and control voltage circuitry pertaining to these systems. Prerequisite: (ACR 102 and ACR 103) with a grade of C or greater. Corequisite: ACR 261. Lecture: 3 credits (45 contact ACR 261 (3) Course ID: Heating and Humidification Lab Provides lab time for application of troubleshooting, checking, adjusting, and installing heating units currently in use. Prerequisite: (ACR 102 and ACR 103) with a grade of C or greater. Corequisite: ACR 260. Laboratory: 3 credits (90 contact ACR 270 (3) Course ID: Heat Pump Application Explains reverse cycle heating systems, defrost cycles, reversing valves, and auxiliary heating. Concentrates on line and control voltage circuitry pertaining to these units. Prerequisite: [(ACR 100 and ACR 102) with a grade of C or greater] or Permission of Instructor. Corequisite: ACR 271. Lecture: 3 credits (45 contact ACR 271 (2) Course ID: Heat Pump Application Lab Provides for application of troubleshooting, checking, adjusting, and installing reverse cycle units. Prerequisite: [(ACR 100 and ACR 102) with a grade of C or greater] or Permission of Instructor. Corequisite: ACR 270. Laboratory: 2 credits (60 contact ACR 290 (3) Course ID: Journeyman Preparation Includes lectures, discussions, and presentations pertaining to the proper application of HVAC codes. Prepares the student to pass the Kentucky Journeyman HVAC licensing exam. (This class should be taken at the end of the program.) Lecture: 3 credits (45 contact ACR 291 (1) Course ID: Special Problems I A course designed for the student who has demonstrated specific special needs. Prerequisite: Permission of Instructor ACR 293 (2) Course ID: Special Problems II A course designed for the student who has demonstrated specific special needs. Prerequisite: Permission of Instructor ACR 295 (3) Course ID: Special Problems III A course designed for the student who has demonstrated specific special needs. Prerequisite: Permission of Instructor ACR 298 (2) Course ID: Practicum Practicum provides supervised on-the-job work experience related to the student s education objectives. Students participating in Practicum do not receive compensation. Prerequisite: Permission of the Instructor. Components: Practicum ACR 299 (2) Course ID: Cooperative Education Program Co-op provides supervised on-the-job work experience related to the student s educational objectives. Students participating in the Cooperative Education program receive compensation for their work. Prerequisite: Permission of the Instructor. Components: Co-Op ACT Accounting ACT 101 (3) Course ID: Fundamentals of Accounting I Students are introduced to accounting terminology and general theoretical principles. The major focus of the course is on the accounting cycle and the communication of financial information to decision-makers. Lecture: 3 credits (45 contact 223

4 ACT 102 (3) Course ID: Fundamentals of Accounting II Basic financial accounting concepts and methods are expanded to include accounting for partnerships and corporations. Lecture: 3 credits (45 contact Prerequisite: ACT 101. ACT 177 (3) Course ID: Entrepreneurial Accounting Includes issues and concerns that are vital to small and medium-size businesses. Lecture: 3 credits (45 contact ACT 196 (3) Course ID: Payroll Accounting Introduces the design and implementation of modern payroll systems. Lecture: 3 credits (45 contact ACT 277 (3) Course ID: Managerial Accounting Topics The study of the uses of accounting information in managerial planning and control of organizations. Prerequisite: ACC 202. Lecture: 3 credits (45 contact ACT 279 (3) Course ID: Computerized Accounting Systems Accounting concepts and principles are applied using computerized accounting systems. Lecture: 3 credits (45 contact Prerequisite: ACC 201 or ACT 101 and ACT 102 or concurrent enrollment in ACT 102. Computer literacy 3 credit hours. ACT 281 (3) Course ID: Individual Taxation The study of the theory and applications of federal and individual income taxes will be emphasized. Lecture: 3 hours. Prerequisite: One semester of college accounting or consent of instructor. ACT 286 (3) Course ID: Financial Accounting Topics Additional in-depth exposure to financial accounting procedures for classifying, recording, reporting, and disclosure; intended primarily for students enrolled in the Accounting Technology AAS program and the Accounting Option in the Business Administration AAS Program. Prerequisite: ACC 201 or ACT 101 and ACT 102. Lecture: 3 credits (45 contact ACT 290 (1-3) Course ID: Selected Topics in Accounting: (Topic) This course is designed to expand course offerings as new technology is developed, new issues evolve and/ or to address local accounting issues. Topics may vary from semester to semester at the discretion of the instructor; courses may be repeated with different topics to a maximum of six credit hours. Lecture: 1-3 hours. Prerequisite: Consent of instructor. ACT 295 (3) Course ID: Corporate and Partnership Taxation Emphasizes the study of federal and state tax laws applying to corporations, partnerships, and other entities. Prerequisite: ACT 281 or consent of instructor. Lecture 3.0 credits (45 contact ACT 1771 (0.6) Course ID: Rationale for a Well Designed Accounting System Developing a well designed accounting system for the entrepreneur. Lecture: 0.6 credits (9 contact ACT 1772 (0.6) Course ID: Contractual and Legal Reporting Requirements Common contractual and legal reporting requirements. 224 Lecture: 0.6 credits (9 contact Prerequisite: ACT 1771 or consent of the instructor. ACT 1773 (0.6) Course ID: Overview of Accounting for the Entrepreneur Overview of accounting for the entrepreneur. Lecture: 0.6 credits (9 contact Prerequisite: ACT 1772 or consent of the instructor. ACT 1774 (0.6) Course ID: Introduction to Computer Accounting Software to Record Basic Accounting Transactions Computer accounting software to record basic accounting transactions. Lecture: 0.6 credits (9 contact Prerequisite: ACT 1773 or consent of instructor. ACT 1775 (0.6) Course ID: Introduction to Computer Accounting Software to Generate Financial Statements Computer accounting software to generate financial statements. Lecture: 0.6 credits (9 contact Prerequisite: ACT 1774 or consent of the instructor. ACT 1961 (0.5) Course ID: Payroll Records Introduces the records required for today s payroll or human resource manager. Covers the relationship between Payroll and Human Resources and their common laws. Concludes with salary computations and methods to compute Gross Payroll. Lecture: 0.5 credit (7.5 contact ACT 1962 (0.5) Course ID: Payroll Taxes Covers federal and state tax withholding and employerside payroll expenses. Prerequisite: ACT Lecture: 0.5 credit (7.5 contact ACT 1963 (0.5) Course ID: Accounting for Payroll Covers federal and state unemployment laws and accounting for payroll. Prerequisite: ACT Lecture: 0.5 credit (7.5 contact ACT 1964 (1) Course ID: Manual Payroll Requires the student to complete a Quarterly Payroll Simulation. Prerequisite: ACT 1962 & Lecture: 1 credit (15 contact ACT 1965 (0.5) Course ID: Computerized Payroll Requires the student to complete a Computerized Payroll Simulation. Prerequisite: ACT 1962 & Lecture: 0.5 credit (7.5 contact ADX Automotive Technology ADX 120 (3) Course ID: Basic Automotive Electricity Introduces the student to the principles, theories, and concepts of the automotive electrical system that include the unique diagramming, coding and locating of wiring, and component devices. Lecture: 3.0 credits (45 contact ADX 121 (2) Course ID: Basic Automotive Electricity Lab Provides hands-on work designed to allow the student to use the concepts, principles, and theories covered in Basic Automotive Electricity, ADX 120, in practical application. Provides the student a work experience alternating between periods of work off campus and work in a classroom laboratory setting. Pre-requisite or Corequisite: ADX 120. Lab: 2.0 credits (90 contact ADX 150 (3) Course ID: Engine Repair Provides a series of lectures and demonstrations on the fundamentals of engine repair, troubleshooting, and engine operation and maintenance. Lecture: 3.0 credits (45 contact ADX 151 (2) Course ID: Engine Repair Lab Provides practical experiences and applications relating to engine repair, inspection, trouble shooting and maintenance. The student may be provided a work experience alternating between periods of work off campus and work in a classroom laboratory setting. Pre-requisite or Corequisite: ADX 150. Lab: 2.0 credits (90 contact ADX 170 (3) Course ID: Climate Control Introduces the theory and operation of heating and air conditioning systems, air conditioning terminology, and servicing and troubleshooting mechanical and electrical circuits of heating and air conditioning systems. Lecture: 3.0 credits (45 contact ADX 171 (1) Course ID: Climate Control Lab Provides opportunities to trouble shoot, repair and perform maintenance on heating and air conditioning systems. Provides experiences in safety precautions, special tool uses, component operation and how to service and trouble shoot the complete system. The student may be provided a work experience alternating between periods of work off campus and work in a classroom laboratory setting. Pre-requisite or Corequisite: ADX 170. Lab: 1.0 credit (45 contact ADX 260 (3) Course ID: Electrical Systems Focuses on the theory and principles relating to automotive electrical/electronic components. Lecture: 3.0 credits (45 contact ADX 261 (2) Course ID: Electrical Systems Lab Provides practical applications and experiences related to the theory and principles of automotive electrical/electronic components. The student may be provided a work experience alternating between periods of work off campus and work in a classroom laboratory setting. Pre-requisite or Corequisite: ADX 260. Lab: 2.0 credits (90 contact AER Aeronautics AER 110 (3) Course ID: Fundamentals of Aerodynamics/Private Pilot Ground School Covers the fundamentals of aerodynamics aircraft systems, aeronautical decision making (ADM), applicable federal regulations, flight planning and aeronautical charts, meteorology, flight navigation, and weight and balance. Requires no previous aviation experience and is formatted to take zero time students and ready them for the national private pilot examination. Lecture: 3.0 credit hours (45 contact AET Applied Engineering Technology AET 100 (1) Course ID: Introduction to Lean Systems Presents methodologies for Lean systems to include Lean Manufacturing basics and tools, Lean implementation, Lean measures, Six-Sigma, and Lean supply chain design and management. Lecture: 1 credit (15 contact

5 AET 102 (4) Course ID: Introduction to Energy Introduces the scientific principles of energy and fuels and investigates specific topics: nature and extent of energy resources, economics and environmental effects, alternative energy, energy technology, health and safety. Lecture/Lab: 4 credits (75 contact AET 110 (4) Course ID: Introduction to Circuit Analysis Covers basic electrical components as well as DC/AC circuit configurations; introduces the theory and operation of solid state devices such as diodes, BJTs, FETs, and operational amplifiers; emphasizes circuit construction, analysis, and troubleshooting. Corequisite: MT 125 or Consent of Instructor. Lecture/Lab: 4 credits (75 contact AET 112 (4) Course ID: Alternative Energy Fundamentals Addresses topics of alternative energy sources including passive and active solar systems, fuel cells, hydroelectric power, geothermal heat transfer, photovoltaic systems, bio fuels, and wind energy. Prerequisite: AET 102. Lecture/ Lab: 4 credits (75 contact AET 114 (4) Course ID: Solar and Wind Energy Generation Introduces the methods and equipment necessary for the production of electrical energy by alternative means to include photovoltaic systems, wind turbines and solar water heating. Prerequisite: AET 110 or consent of intructor. Lecture/Lab: 4 credits (75 contact AET 120 (4) Course ID: Power Electronics Introduces the circuitry and components used to convert the power generated by alternative methods to line voltage and current values commonly used in residential and commercial electrical installations; includes Thyristor theory and application, inverter types and application, and battery charging and maintenance. Prerequisite: AET 110 or Consent of instructor. Lecture/Lab: 4 credits (90 contact AET 130 (3) Course ID: Industrial Sensors Covers various types of industrial sensors and optoelectronic devices. Prerequisite: AET 110 or Consent of Instructor. Lecture/Lab: 3 credits (60 contact AET 140 (4) Course ID: Industrial Equipment Maintenance Covers maintenance techniques and practices commonly found in a wide variety of industrial settings to include areas such as lubrication, mechanical drives, bearings, and safe working practices. Lecture/Lab: 4 credits (90 contact AET 150 (4) Course ID: Advanced Circuit Analysis Introduces the more advanced concepts of DC and AC circuits. Topics include Kirchhoff s Laws, network theorems, Delta-Y conversion, reactive circuits, complex impedances, Z-matching, resonance, and LC tank loading effect. Prerequisite: AET 110 or Consent of Instructor. Lecture/Lab: 4 credits (75 contact AET 160 (4) Course ID: Industrial Controls Electronics Introduces the concepts of industrial power control to include solid state devices, controllers, single and polyphase rectification, and DC power supplies. Prerequisite: AET 110 or Consent of Instructor. Lecture/Lab: 4 credits (75 contact AET 170 (4) Course ID: Digital Circuits and Concepts Covers the basics of digital electronics to include logic gates, number systems, Boolean algebra, Karnaugh mapping, registers, bi-stable circuits, and basic arithmetic circuits. Prerequisite: AET 110 or consent of instructor. Lecture/Lab: 4 credits (75 contact AET 180 (3) Course ID: Industrial Computer Architecture Introduces the basic layout of industrial computers as preparatory course leading into the more advanced PLC s; includes binary and hexadecimal number systems, bus oriented computer systems, I/O scan, interfacing considerations, and introduction to programmable controllers. Prerequisite: AET 110 or Consent of Instructor. Lecture: 3 credits (45 contact AET 190 (4) Course ID: Industrial Computer Programming Concepts Covers programming concepts specifically directed toward industrial programmable devices such as PLCs. Prerequisite: Consent of instructor. Lecture/Lab: 4 credits (75 contact AET 200 (4) Course ID: Integrated Circuits Focuses on integrated circuits as they apply to linear and non-linear applications to include integration techniques, operational amplifiers, linear voltage amplifiers, waveform generators, comparators, active filters, and interfacing. Prerequisite: AET 150 or Consent of Instructor. Lecture/ Lab: 4 credits (75 contact AET 210 (4) Course ID: Alternative Energy Independent Studies Provides the student with the opportunity to put to practical use, by way of a student project, the knowledge and skills gained in AET 102, AET 112, AET 114, and AET 120. Prerequisite: AET 112 and AET 114 and AET 120. Lecture/ Lab: 4 credits (105 contact AET 220 (4) Course ID: Modulation Techniques and Applications Introduces the various types of electronic modulation including amplitude, frequency, and phase modulation with emphasis on antenna theory and the study of RF power in both resonant and non-resonant loads. Prerequisite: AET 200 or Consent of Instructor. Lecture/Lab: 4 credits (75 contact AET 230 (3) Course ID: Introduction to Circuit Design Utilizes ideas learned in previous electronics courses to design, build, and test circuits based upon design criteria provided by the instructor. Prerequisite: [AET 170 and AET 200] or Consent of Instructor. Lecture/Lab: 3 credits (60 contact AET 240 (4) Course ID: Industrial Machinery Control Examines AC and DC motors and their associated control equipment. Introduces ladder logic and schematic diagram interpretation and drawing. Gives the student practical experience in the design, construction and troubleshooting of industrial motor control circuitry. Advances the use of solid state devices and system integration. Prerequisite: AET 110. Lecture/Lab: 4 credits (90 contact AET 250 (4) Course ID: PLC Networking Introduces the basic concepts in PLC networking to include networking protocols specific to industrial controllers, ASCII codes, bus topologies, and handling of remote I/O. Prerequisite: AET 190. Lecture/Lab: 4 credits (75 contact AET 260 (4) Course ID: Robotics and Programmable Controls Introduces the theory of robots and programmable controls including terminology, components, and basic programming; provides theory of servo and non-servo robots and their controllers. Prerequisite: Consent of instructor. Lecture/Lab: 4 credits (75 contact AET 270 (4) Course ID: Advanced PLC Programming Introduces the student to the wide range of capabilities, beyond basic programming needs, which are available to the modern PLC user. Includes data Manipulation; shift register and sequencer instructions; binary, octal and hexadecimal numbering systems; and analog inputs and outputs. Prereqisite: EET 276 and EET 277. Lecture/Lab: 4 credits (75 contact AFS Air Force Studies AFS 111 (1) Course ID: Aerospace Studies I A course designed to provide the student with a basic understanding of the nature and principles of war, national power, and the Department of Defense role in the organization of national security. The student also develops leadership abilities by participating in a military organization, the cadet corps, which offers a wide variety of situations demanding effective leadership. Corequisite: AFS 112. Lecture: 1 credit (15 contact AFS 112 (1) Course ID: Leadership Laboratory I A course designed for development of basic skills required to be a manager, including communications, human relations, and administration of equal opportunity. Credit will not be granted toward the hours requirements for the degree. Pass/Fail only. Corequisite: AFS 111. Laboratory: 1 credit (45 contact AFS 113 (1) Course ID: Aerospace Studies I A course designed to provide the student with a basic understanding of the contribution of aerospace power to the total U.S. strategic offensive and defensive military posture. The student also develops leadership abilities by participating in a military organization, the cadet corps, which offers a wide variety of situations demanding effective leadership. Prerequisite: AFS 111. Lecture: 1 credit (15 contact AFS 114 (1) Course ID: Leadership Laboratory 1 A continuation of AFS 113. A course designed to develop managerial skills including superior/subordinate relationships, communications, customs and courtesies, basic drill movements and career progression requirements. Credit will not be granted toward the hours requirements for the degree. Pass/Fail only. Corequisite: AFS 113. Laboratory: 1 credit (45 contact AFS 211 (1) Course ID: Aerospace Studies II Introduces the study of air power from a historical perspective; focuses on the development of air power into a primary element of national security. Leadership experience is continued through active participation in the cadet corps. Prerequisite: AFS 111, 113 or PAS approval. Lecture, 1 hour; leadership, laboratory, one hour. AFS 212 (1) Course ID: Leadership Laboratory II A course designed for development of advanced skills required to be a manager/leader, including leadership studies, public speaking, group dynamics, motivation and preparation for field training. Credit will not be granted toward the hours requirements for the degree. Pass/Fail only. Corequisite: AFS

6 AFS 213 (1) Course ID: Aerospace Studies II Provides a foundation for understanding how air power has been employed in military and non-military operations to support national objectives. Examines the changing mission of the defense establishment, with particular emphasis on the United States Air Force. Leadership experience is continued through participation in the cadet corps. Lecture, one hour; leadership laboratory, one hour per week. Prerequisite: AFS 111, 113 or PAS approval. AFS 214 (1) Course ID: Leadership Laboratory II A continuation of AFS 213. A course designed to develop supervisory management skills to include communications, techniques of critique, social actions, personnel evaluation procedures, problem solving, role playing and field training preparation. Credit will not be granted toward the hours requirements for the degree. Pass/Fail only. Corequisite: AFS 213. AGR Agricultural Technology AGR 101 (3) Course ID: The Economics of Food and Agriculture Introduces the field of agricultural economics and some of the basic tools and concepts of decision-making. Illustrates concepts in terms of selected current social and economic issues including the role of agriculture in both a national and international dimension. Lecture: 3 credits (45 contact Attributes: SB - Social Behavior Science, SB - Agriculture AGR 125 (3) Course ID: Introduction to Fertilizers and Soils Introduces practical aspects of soils and fertilizers as related to plant growth and production. Lecture: 2.0 credits (30 contact Lab: 1.0 credits (30 contact AGR 130 (2) Course ID: Field Applications in Agriculture Includes methods of solving many application problems encountered in agriculture using applied mathematical and logic skills. Emphasizes practical mathematical skills already acquired from secondary education to address agricultural situations involving computations necessary for upper level courses in agriculture. Requires some knowledge of agricultural situations. Prerequisite: MAT 055 or equivalent placement level. Lecture: 2.0 credits (30 contact AGR 140 (3) Course ID: Issues In Agriculture Provides an introduction to agriculture and current issues pertaining to the agricultural industry. Lecture: 3.0 credits (45 contact AGR 150 (3) Course ID: Agricultural Power Provides an introduction to farm equipment and their power units through classroom instruction that concentrates on specific principles that govern the equipment. Includes a lab that applies the principles learned in the classroom. Lecture: 1.0 credit (15 contact Lab: 2.0 credits (45 contact AGR 160 (3) Course ID: Horticultural Science A study of the practical principles and practices used in horticulture. AGR 165 (3) Course ID: Agricultural Seminar Includes reports and discussion of problems in relation to operations of agricultural business. Offered only in summer. Lecture: 3.0 credits (45 contact AGR 170 (3) Course ID: Introduction to Equipment, Machines, and Engines Provides an introduction to tractors, combines, balers, forage harvesters and windrowers and various attachments. Includes a study of the operation, adjustments, and repairs. Covers an introduction to engines in which theory and minor repairs will be discussed. Lecture: 1.0 credit (15 contact Lab: 2.0 credits (90 contact AGR 180 (2) Course ID: Agricultural Internship I Provides the opportunity to broaden the educational experience through appropriate observation and individualizes work assignments related to the prerequisite and/or co-requisite course objectives. The students will spend 80 hours of supervised field experience in an approved Agricultural Industry. Pre-requisite Or Co-requisite: (AGR 150 and AGR 140) or Consent of Instructor. Lab: 2.0 credits (75 contact AGR 190 (2) Course ID: Agricultural Internship II Provides the opportunity to broaden the educational experience through appropriate observation and individualized work assignments related to the prerequisite and/or co-requisite course objectives. The students will spend 80 hours of supervised field experience in an approved Agricultural Industry. Prerequisite: (AGR 125 and AGR 180 and AGR 170) or Consent of Instructor. Lab: 2.0 credits (75 contact AGR 200 (2) Course ID: Agricultural Internship III Provides the opportunity to broaden the educational experience through appropriate observation and individualized work assignments related to the prerequisite and/or co-requisite course objectives. The students will spend 80 hours of supervised field experience in an approved Agricultural Industry. NOTE: Internship III is a variable credit (1-2 credit hours) with a total 2 credit hour program requirement. Students must take a minimum of one credit hour of Internship in their last semester of enrollment or after all agricultural classes have been completed. Prerequisite: AGR 180 and AGR 190. Lab: 2.0 credits (75 contact AGR 220 (3) Course ID: Computers In The Agricultural Environment Provides an introduction to computers as they relate to the agricultural environment. Prerequisite: CIS 100. Lecture 2.0 credits (30 contact Lab: 1.0 credit (30 contact AGR 223 (3) Course ID: Introduction to Artificial Insemination for Cattle The primary objective of this course is to instruct students in artificial insemination techniques in cattle. Topics will include reproductive system, herd health, nutrition, semen handling, and estrus detection and synchronization. Prerequisite: AG 240 or consent of Instructor. AGR 230 (3) Course ID: Career Development in Agriculture Includes essential aspects of career preparation, entry, adjustment, and advancement in agriculture and related fields. Lecture: 3.0 credits (45 contact AGR 240 (3) Course ID: Introduction to Animal Science Provides a limited overview of the farm species of livestock. Includes the study of major livestock breeds of beef and dairy cattle, sheep, swine, poultry, and horses. Covers management application for livestock production as well as production facilities. Lecture: 2.0 credits (30 contact Lab: 1.0 credits (30 contact AGR 250 (3) Course ID: Introduction to Plants/Crop Production Familiarizes students with the basic principles and theories involved in field crop production. Provides a limited understanding of how crops are grown as a prelude to growing crops successfully. Covers pest and pesticides as well as plant disease and protection. Lecture: 2.0 credits (30 contact Lab: 1.0 credit (45 contact AGR 260 (3) Course ID: Introduction to Sustainable Agriculture Provides students with a clear perspective on the principles, history, and practices of sustainable agriculture in our local and global communities. Provides understanding of the challenges to sustainability in our present system of agriculture. Enables students to identify principles of sustainable agriculture as they relate to basic production practices. Lecture: 3.0 credits (45 contact AGR 270 (3) Course ID: Introduction to Organic Agriculture Introduces students to the theories, practice, and policy of organic agriculture. Topics covered include the history and the need for organic agriculture, fundamental organic farming practices, organic animal production, the National Organic Program, and economic and marketing considerations for organic products. Lecture: 3.0 credits (45 contact AHS Allied Health AHS 100 (2) Course ID: Human Growth and Development Course focus is on the promotion of health through assessment of individuals growth and development across the life span. Consideration is given to the family, cultural, environmental, spiritual, and genetic influences when meeting basic human needs. Lecture: 2 credits (30 contact AHS 105 (3) Course ID: Introduction to Health Occupations Basic health care concepts and skills for students interested in or planning a career in health care are introduced. Basic body mechanics, health care delivery systems, caregiver/client relationships, infection control, basic assessment skills, first aid, cardiopulmonary resuscitation certification, team-building skills and problem-based learning are included. Lecture: 2.5 hours; Laboratory: 2 hours. AHS 109 (4) Course ID: Introduction to Body Structure and Functions Provides knowledge of the structure and function of the human body with emphasis on normalcy. Includes interaction of all body systems in maintaining homeostasis and promotes an understanding of health maintenance. Not intended as a general education science course. Lecture: 4 credits (60 contact AHS 115 (3) Course ID: Medical Terminology A study of anatomical, physiological and pathological terminology with emphasis on work structures and definition of root words, suffixes, and prefixes from Greek and Latin. Additional emphasis is placed on spelling and pronunciation. Primarily designed for individuals preparing for a career in health care. No previous knowledge of Greek or Latin is required. Lecture: 3 hrs. AHS 120 (1) Course ID: Medical Terminology Basic medical word techniques emphasizing anatomical, physiological and medical terms. Lecture: 1 credit (15 contact 226