Skill Standards Checklist Welding
|
|
- Zoe Smith
- 6 years ago
- Views:
Transcription
1 Skill Standards Checklist Welding CERTIFICATION AREAS COMPLETED: Student Name Welding Basics (required)** School District Core Abilities (required)** YA Consortium Welding Principles and Practices: (must complete a minimum of 2 processes) YA Coordinator Stick MIG TIG Flux Core High School Diploma/GED/HSED Date Received Cutting Principles and Practices: (must complete a minimum of 2 processes) Manual Oxyfuel Level One Requirements: All ** items, plus a minimum Machine Oxyfuel of onewelding process and one Cutting process. Air Carbon A minimum of 450 work hours Plasma Laser (counts as 2 processes) A minimum of 900 work hours Work Based Learning: Total Hours Company Name Phone # Employed Governor s Work-Based Learning Board - WBL (8/99)
2 Please sign this page if you have initialed competencies as a mentor, trainer or instructor of this student. CERTIFICATION: I certify that this student has successfully completed the competencies required in the areas I have initialed. Instructor Signature Instructor Signature Printed Name Printed Name Date Signed Date Signed Instructor Signature Instructor Signature Printed Name Printed Name Date Signed Date Signed 2
3 Core Abilities Required Core abilities address broad knowledge, skills, and attitudes that go beyond the context of a specific course. Core abilities are not taught in specific lessons. These are the employability skills that are critical for success in the Welding industry. 3 = Exceeds entry level/consistently displays this behavior 2 = Meets entry level/often displays this behavior 1 = Needs improvement/rarely displays this behavior 1. Prepare time or job cards (reports or records) Perform housekeeping duties Works productively Works cooperatively with others Works as a team member Acts responsibly Follow verbal instructions Communicates clearly with supervisor and others Follow safe practices Recognize safe and unsafe work habits Demonstrates proper safety procedures A TWO (2) IS REQUIRED ON ALL COMPETENCIES TO PASS THIS SECTION 3
4 Welding Basics Required 3 = Moderately Skilled - has performed job independently during the training program, limited additional training may be required. (entry level skill competent) 2 = Limited Practice - has practiced job during training program, additional training is required to develop skill. (entry level) 1 = Exposure Only - general information provided with no practice time, close supervision needed and additional training required. Drawing and Welding Symbol Interpretation 1. Interpret basic elements of a drawing or sketch Interpret welding symbol information Fabricate parts from a drawing or sketch Visual Examination Principals and Practices 4. Examine cut surfaces and edges of prepared base metal parts Examine tack, intermediate layers, and completed welds ALL COMPETENCIES MUST BE MET AT A THREE (3) TO PASS THIS SECTION 4
5 Welding Principles and Practices: Fill in Process (must complete a minimum of 2 processes) 3 = Moderately Skilled - has performed job independently during the training program, limited additional training may be required. (entry level skill competent) 2 = Limited Practice - has practiced job during training program, additional training is required to develop skill. (entry level) 1 = Exposure Only - general information provided with no practice time, close supervision needed and additional training required. 1. Perform safety inspections of equipment and accessories Perform operation maintenance to equipment and accessories Set up for welding operations on plain carbon steel Operate welding equipment Make fillet welds on plain carbon steel Make groove welds on plain carbon steel ALL COMPETENCIES MUST BE MET AT A THREE (3) TO PASS THIS SECTION 5
6 Welding Principles and Practices: Fill in Process (must complete a minimum of 2 processes) 3 = Moderately Skilled - has performed job independently during the training program, limited additional training may be required. (entry level skill competent) 2 = Limited Practice - has practiced job during training program, additional training is required to develop skill. (entry level) 1 = Exposure Only - general information provided with no practice time, close supervision needed and additional training required. 1. Perform safety inspections of equipment and accessories Perform operation maintenance to equipment and accessories Set up for welding operations on plain carbon steel Operate welding equipment Make fillet welds on plain carbon steel Make groove welds on plain carbon steel ALL COMPETENCIES MUST BE MET AT A THREE (3) TO PASS THIS SECTION 6
7 Cutting Principles and Practices: Fill in Process (must complete a minimum of 2 processes) 3 = Moderately Skilled - has performed job independently during the training program, limited additional training may be required. (entry level skill competent) 2 = Limited Practice - has practiced job during training program, additional training is required to develop skill. (entry level) 1 = Exposure Only - general information provided with no practice time, close supervision needed and additional training required. 1. Perform safety inspections of equipment and accessories Perform operation maintenance to equipment and accessories Set up for manual or automatic cutting operations Operate manual or automatic cutting equipment Perform straight, shape and/or beveled cutting operations. (circle all that apply) Remove weld metal slag ALL COMPETENCIES MUST BE MET AT A THREE (3) TO PASS THIS SECTION 7
8 Cutting Principles and Practices: Fill in Process (must complete a minimum of 2 processes) 3 = Moderately Skilled - has performed job independently during the training program, limited additional training may be required. (entry level skill competent) 2 = Limited Practice - has practiced job during training program, additional training is required to develop skill. (entry level) 1 = Exposure Only - general information provided with no practice time, close supervision needed and additional training required. 1. Perform safety inspections of equipment and accessories Perform operation maintenance to equipment and accessories Set up for manual or automatic cutting operations Operate manual or automatic cutting equipment Perform straight, shape and/or beveled cutting operations. (circle all that apply) Remove weld metal slag ALL COMPETENCIES MUST BE MET AT A THREE (3) TO PASS THIS SECTION 8
9 Special Projects or Certifications Instructor/Mentor Comments: Instructor/Mentor Signature Date Signed 9
10 Special Projects or Certifications Instructor/Mentor Comments: Instructor/Mentor Signature Date Signed 10
11 Notes 11
PRESSURE TACK WELDER CERTIFICATE OF COMPETENCY EXAMINATION
CERTIFICATE OF COMPETENCY AB-250 Edition 2, Revision 1, 2017-11-15 GENERAL INFORMATION Introduction: This Syllabus is intended to assist candidates preparing for the Pressure Tack Welder Certificate of
More informationWLDG 1428 Introduction to Shielded Metal Arc Welding
SYLLABUS WLDG 1428 Introduction to Shielded Metal Arc Welding WELDING BRAZOSPORT COLLEGE LAKE JACKSON TEXAS PREPARED BY: Jay Barr DATE: August 25, 2016 INSTRUCTOR RECOMMENDED BY: DATE: DIVISION CHAIRMAN
More informationEvendale Fire Department Procedures Manual
Subject: Training Safety Policy Effective: 05-23-2011 Evendale Fire Department Attachment(s): Yes Village Administrative Code Ref. Number: None 1. Purpose: 2. Policy: 3. Definitions: A. To define the roles
More informationEye and Face Protection in Maryland Schools
Eye and Face Protection in Maryland Schools Maryland Code (State Law) Maryland Code/EDUCATION /TITLE 7. PUBLIC SCHOOLS/SUBTITLE 4. HEALTH AND SAFETY OF STUDENTS / 7-407. Protective eye device. 7-407. Protective
More informationFluorine Gas Mist Pot Fails
Fluorine Gas Mist Pot Fails Lessons Learned Volume 03 Issue 09 2004 USW Fluorine Gas Mist Pot Fails Purpose To conduct a small group lessons learned activity to share information gained from incident investigations.
More informationPennsylvania Automotive Association Automotive Technology Scholarships
TO: RE: Those interested in Automotive Technology Automotive Technology Scholarships The, through a fund within the PAA Foundation, awards scholarships to young people to develop the skills necessary to
More informationAll completed applications are due on Monday, August 27, 2018 to one of the LTHS Band Directors.
August 21, 2018 Dear Student and Parent, Attached is the application form for the LT Band Parent Organization HIGH SCHOOL PRIVATE LESSON SCHOLARSHIPS. These scholarships will be awarded to students who
More informationWorker s Arm Pulled Into Belt and Pulley
Worker s Arm Pulled Into Belt and Pulley Lessons Learned Volume 04 Issue 37 2004 USW Worker s Arm Pulled Into Belt and Pulley Purpose To conduct a small group lessons learned activity to share information
More informationWelding Technology. September 2017
Welding Technology September 2017 Prepared by the Los Angeles/Orange County Center of Excellence for Labor Market Research Codes and Descriptions Currently, there is one occupation in the standard occupational
More informationWLDG 2443 ADVANCED SHIELD METAL ARC WELD (PLATE)
SYLLABUS WLDG 2443 ADVANCED SHIELD METAL ARC WELD (PLATE) WELDING BRAZOSPORT COLLEGE LAKE JACKSON TEXAS PREPARED BY: Jay Barr DATE: August 25, 2016 INSTRUCTOR RECOMMENDED BY: DATE: DIVISION CHAIRMAN RECOMMENDED
More informationPlanning Guide
Giles County Technology Center The Career and Technical Education (CTE) programs at Giles County Technology Center offer students career pathways to achieve their goals of employment and further education.
More information3119 NAVMC A 19 May 2015
3119. OCCUPATIONAL FIELD 21, GROUND ORDNANCE MAINTENANCE 1. Introduction. The Ground Ordnance Maintenance OccFld ensures the MARFOR that serviceable ordnance materials are available. Duties include the
More informationINFORMAL SAFETY PROGRAM FOR SMALL BUSINESS
INFORMAL SAFETY PROGRAM FOR SMALL BUSINESS Provided by; Industry Services Small Business PREFACE Due diligence means to take all reasonable care in all circumstances of the workplace to protect the health
More informationACCIDENT PREVENTION PROGRAM &
Hitchcock Independent School District Mike Bergman Ed.D., Superintendent ACCIDENT PREVENTION PROGRAM 2008-2009 & 2009-2010 02/10/2009 1 TABLE OF CONTENTS General Safety Policy... 3 Responsibilities of
More informationStudent Declaration of Understanding
Student Declaration of Understanding Workplace Safety and Insurance Board or Private Insurance Coverage for Students on Unpaid Placements Student coverage while on unpaid placement: The government of Ontario,
More informationRATING. Each rating is followed by space for explanation(s) designed to reinforce the current performance and/or guide the individual to improve.
PERFORMANCE REVIEW COUNTY EXTENSION ASSOCIATE NAME: COUNTY: PERIOD OF EVALUATION: PROGRAM AREA: RATING This evaluation form is designed as a tool to assist with the evaluation of professional staff based
More informationHouston Controls, Inc Safety Management System
Preparation: Safety Mgr Authority: Dennis Johnston Issuing Dept: Safety Page: Page 1 of 8 Purpose This Bloodborne Pathogen Exposure Control Plan has been established to ensure a safe and healthful working
More informationTRAINING CALENDAR MARCH 2018
TRAINING CALENDAR MARCH 2018 Why Boecker? Boecker, one of the world s finest Food Safety training organizations and a registered training centre with the Royal Society for Public Health - UK, and Chartered
More informationThousands of workers are blinded each year from work-related eye injuries
Eye Safety Each day, about 2,000 US workers injure their eyes and require medical treatment Thousands of workers are blinded each year from work-related eye injuries 2 Common eye injuries include Cuts
More informationBaler Gone Wild! Lessons Learned. Volume 03 Issue USW
Baler Gone Wild! Lessons Learned Volume 03 Issue 29 2004 USW Baler Gone Wild! Purpose To conduct a small group lessons learned activity to share information gained from incident investigations. To understand
More information1. User Name: 2. Password: JROTC2014!!
Rochester Early College International High School JROTC 200 Genesee ST. Rochester, New York 14611 LET I-IV JROTC SYLLABUS 2014-2015 Mission: Motivate Young PEOPLE to be Better Citizens 1. COURSE NAME:
More informationLaboratory Chemical Hygiene Plan -- Teaching Lab
Laboratory Chemical Hygiene Plan -- Teaching Lab A chemical hygiene plan is a written program developed to establish procedures, protective equipment requirements and standard work practices that promote
More informationLearning Objectives. Describe the correct response to the commands for forming and marching the platoon. Match drill commands to platoon formations
LESSON 1: PLATOON DRILL Learning Objectives Describe the correct response to the commands for forming and marching the platoon Compare platoon drills and squad drills Match drill commands to platoon formations
More informationSUCCESSFUL CAPSTONE DESIGN PROJECT
How to sponsor a SUCCESSFUL CAPSTONE DESIGN PROJECT FOR INFORMATION OR TO DISCUSS YOUR PROJECT IDEA, PLEASE CONTACT: Mary I. Frecker, Ph.D. Director, Bernard M. Gordon Learning Factory The Pennsylvania
More informationAutomotive unit test specification breakdown
Automotive unit test specification breakdown Test : 4270/4290-151, Title: Knowledge of Routine Light Vehicle Maintenance Test : 4271/4291-151, Title: Knowledge of Removing and Fitting Basic Motor Mechanical,
More informationAssociated Builders and Contractors Training Academy (ABC Training Academy) Catalog
Associated Builders and Contractors Training Academy (ABC Training Academy) 2017-2018 Catalog Main Campus: Phone: 661-392-8729 Fax: 661-392-9076 Mailing Address: P.O. Box 80718 Bakersfield, CA 93380-0718
More informationInstructions for the Incident/Accident Investigation Form
PALMERTON AREA SCHOOL DISTRICT 680 FOURTH STREET, PALMERTON, PA 18071 610-826-7101 www.palmerton.org Instructions for the Incident/Accident Investigation Form Purpose of Form: Effective loss control efforts
More informationElectrical Safety and Testing Components published in Gazette Notice 1 December 2011
Provider: Date: Approved Competence Programme Provider Site Audit Checklist (Line Mechanic, Cable Jointer and persons engaged on works ) Electrical Safety and Testing Components published in Gazette Notice
More informationSUCCESSFUL CAPSTONE DESIGN PROJECT
How to sponsor a SUCCESSFUL CAPSTONE DESIGN PROJECT FOR INFORMATION OR TO DISCUSS YOUR PROJECT IDEA, PLEASE CONTACT: Matthew Parkinson Director, Bernard M. Gordon Learning Factory The Pennsylvania State
More informationFire Department Safety Officer: Health and Safety Officer
Fire Department Safety Officer: Health and Safety Officer Practical Skills Materials Based on NFPA 52: Standard for Fire Department Safety Officer Professional Qualifications, 205 Edition. Alabama Fire
More informationInsights into the Excellence in Action Award
Insights into the Excellence in Action Award Tuesday, November 10, 2015 Thank You to Our Webinar Host For Today s Webinar - Introduction to the Award - 2014 and 2015 award-winning programs overview - What
More informationINCIDENT COMMAND SYSTEM POSITION MANUAL ASSISTANT SAFETY OFFICER- HAZARDOUS MATERIALS ICS-1102
INCIDENT COMMAND SYSTEM POSITION MANUAL ASSISTANT SAFETY OFFICER- HAZARDOUS MATERIALS ICS-1102 JULY 2016 This document contains information relative to the Incident Command System (ICS) component of the
More informationInstructor Bulletin 10-32
CDE October 1, 2010 Instructor Bulletin 10-32 DOCUMENTATION FREQUENTLY ASKED QUESTIONS The purpose of this bulletin is to answer frequently asked questions regarding proper documentation. These are some
More informationCrane Bashes Pipes. Lessons Learned. Volume 03 Issue USW
Crane Bashes Pipes Lessons Learned Volume 03 Issue 13 2004 USW Crane Bashes Pipes Purpose To conduct a small group lessons learned activity to share information gained from incident investigations. To
More informationBusiness. Ms. Hardin. Business Principles & Applications. Suggested Grade Level: Prerequisite: None. Credit: 1.0
Business Ms. Hardin Business Principles & Applications Suggested Grade Level: 9-10 Prerequisite: None Course Description: This course establishes basic foundations for further study in business and marketing
More informationVP, Facilities and Construction Management
Title: Lead-Based Paint Management Procedure Effective Date: November 2005 Revision Date: January 12, 2017 Issuing Authority: Responsible Officer: VP, Facilities and Construction Management Director Environmental
More informationDefective Backhoe Breaks Line
Defective Backhoe Breaks Line Lessons Learned Volume 03 Issue 05 2004 USW Defective Backhoe Breaks Line Purpose To conduct a small group lessons learned activity to share information gained from incident
More informationCONTRACTORS SAFETY PROCEDURES Health and Safety Procedures Overview. Safety is a high priority of the Chinook s Edge School Division No. 73.
CONTRACTORS SAFETY PROCEDURES Health and Safety Procedures Overview Safety is a high priority of the Chinook s Edge School Division No. 73. Chinook s Edge School Division No. 73 (CESD) is committed to
More informationWorker Injured Elbow by Lifting Shaft
Purpose Worker Injured Elbow by Lifting Shaft To share lessons learned gained from incident investigations through a small group discussion method format. To understand lessons learned through a Systems
More informationWrong PSV Found Installed in Field
Wrong PSV Found Installed in Field Lessons Learned Volume 04 Issue 12 2004 USW Wrong PSV Found Installed in Field Purpose To conduct a small group lessons learned activity to share information gained from
More informationNAVSEA STANDARD ITEM. 1.1 Title: Prevention of Radiographic-Inspection Ionizing-Radiation Hazards; accomplish
NAVSEA STANDARD ITEM ITEM NO: 009-112 DATE: 18 JUL 2014 CATEGORY: I 1. SCOPE: 1.1 Title: Prevention of Radiographic-Inspection Ionizing-Radiation Hazards; accomplish 2. REFERENCES: 2.1 None. 3. REQUIREMENTS:
More informationSTANDARD ITEM. 1.1 Title: Prevention of Radiographic-Inspection Ionizing-Radiation Hazard; accomplish
STANDARD ITEM DATE: 30 APR 2018 CATEGORY: II 1. SCOPE: 1.1 Title: Prevention of Radiographic-Inspection Ionizing-Radiation Hazard; accomplish 2. REFERENCES: 2.1 NAVMED P-5055, Radiation Health Protection
More informationOccupational Injury and Illness Reporting
Name of School: Vocational Program/Course/Room: Optional Information Date of Inspection: Signature of Inspector: Occupational Injury and Illness Reporting Self Inspection Checklist Guidelines: This checklist
More information(Company name) Health and Safety Plan
(Company name) Health and Safety Plan 1 Index I II III IV V VI VII VIII IX Safety Policy Statement Accident/Injury Analysis Component Safety Program Record keeping Component Health and Safety Education
More informationIllinois Valley Community College Career Services. Résumé Worksheet. Please PRINT all information on this form
Illinois Valley Community College Career Services Résumé Worksheet Please PRINT all information on this form NAME: HOME PHONE #: ADDRESS: JOB OBJECTIVE: Work History (Start with your most recent job.)
More informationRegulation STUDENTS August 13, Management of Students with Cancer in the School Setting
August 13, 2008 Management of Students with Cancer in the School Setting These are guidelines to follow when the school is informed of the presence of a student with a cancer diagnosis. I. Modern advanced
More informationChapter 7 Battle Drills
Chapter 7 Battle Drills Train in difficult, trackless, wooded terrain. War makes extremely heavy demands on the soldier s strength and nerves. For this reason, make heavy demands on your men in peacetime
More informationPART 1: SELF ASSESSMENT
Ministry Leader Assessment Form Annual Review for Date: PART 1: SELF ASSESSMENT My Celebrations of the Past Year: Ministry Related Accomplishments List and describe as many ministry-related accomplishments
More informationEMPLOYMENT SERVICES INJURY & ILLNESS PREVENTION PROGRAM THINK SAFETY FIRST CPPFOUNDATION.COM
EMPLOYMENT SERVICES INJURY & ILLNESS PREVENTION PROGRAM THINK SAFETY FIRST CPPFOUNDATION.COM Memorandum Date: January 30, 2012 To: Personnel Committee Cal Poly Pomona Foundation, Inc. From: Dennis Miller
More informationCabin Safety Inspectors Manual
Cabin Safety Inspectors Manual CAP 8400 Annexure 2 Revision 0 November 2016 TRAINING CENTRE INSPECTION/ APPROVAL CHECKLIST Operator: Name of the Cabin Safety Training Manager: Location: Name of Alternate
More information14-16 Programme
14-16 Programme 2015-2017 Contents Agriculture (Level 1) Agriculture (Level 2) Animal Management (Level 1) Animal Management (Level 2) Equine Fishery Management Horticulture Engineering Motor Vehicle Please
More informationHermon High School Junior Reserve Officers Training Corps (JROTC)
Hermon High School Junior Reserve Officers Training Corps (JROTC) The Mission of Hermon High School is to prepare students for personal success in college, work, and community. JROTC Mission: To motivate
More informationFULTON COUNTY MEDICAL CENTER POSITION DESCRIPTION
FULTON COUNTY MEDICAL CENTER POSITION DESCRIPTION POSITION TITLE: ADMISSIONS REGISTRATION CLERK REPORTS TO: REGISTRATION SUPERVISOR REVISION DATE: OCTOBER 2004 I. POSITION SUMMARY: An Admission Registration
More informationPepperdine University MFT Clinical Training Program
Pepperdine University MFT Clinical Training Program MFT STUDENT S EVALUATION OF SUPERVISION AND AGENCY Note: Please return this evaluation to your practicum instructor by the last week of class. Should
More informationFlorida State Courts System Class Specification. Class Title: Deputy Marshal Supreme Court. Class Code: General Description
Florida State Courts System Class Specification Class Title: Deputy Marshal Supreme Court Class Code: 1505 Pay Grade 18 General Description As a law enforcement officer, the essential function of the position
More informationSample worker orientation checklist
Employee name: Position (tasks): First day of work: Date(s) of orientation: Person providing orientation (name and position): Company name: Topic Initials (trainer) Initials (worker) Comments 1. Supervisor
More informationIntroduction to OSHA. 2-hour Lesson. Directorate of Training and Education OSHA Training Institute
Introduction to OSHA 2-hour Lesson Directorate of Training and Education OSHA Training Institute Lesson Overview Purpose: To provide workers with introductory information about OSHA Topics: 1. Why is OSHA
More informationLoudoun Education Foundation Fall 2018 Teacher Grant Application
Loudoun Education Foundation Fall 2018 Teacher Grant Application Matching funds made available by the Making a Difference Grant from the Claude Moore Charitable Foundation (Grants to be used in 2018-2019
More informationRe: SpineCare Foundation PhD RESEARCH FUND APPLICATION
To the research applicant, Re: SpineCare Foundation PhD RESEARCH FUND APPLICATION Thank you for your interest in the SpineCare Foundation Research Fund sponsored PhD scholarship. The SpineCare Foundation
More informationHQ AFOATS AIR FORCE JUNIOR RESERVE OFFICER TRAINING CORPS (AFJROTC)
HQ AFOATS AIR FORCE JUNIOR RESERVE OFFICER TRAINING CORPS (AFJROTC) (Prepared 2002) J R O T C INTERSERVICE CROSS-INDEX DRILL MANUAL TABLE OF CONTENTS FOREWORD..............................................
More informationDEPARTMENT OF THE ARMY *III CORPS & FH REG 40-7 HEADQUARTERS, III CORPS AND FORT HOOD Fort Hood, Texas JULY 1999
DEPARTMENT OF THE ARMY *III CORPS & FH REG 40-7 HEADQUARTERS, III CORPS AND FORT HOOD Fort Hood, Texas 76544-5000 15 JULY 1999 Medical Services VISION CONSERVATION PROGRAM History. This supersedes Fort
More informationPOLICY C-9 ATTACHMENT #1 MONTANA STATE UNIVERSITY COLLEGE OF NURSING Preceptor Data Form. Preceptor=s Name: Home Address: Home Phone No.
ATTACHMENT #1 Preceptor Data Form Preceptor=s Name: Home Address: Home Phone No.: Agency Name: Address: Unit/Department Phone: Job Title: Supervisor=s Name Area of Specialization: Years of Practice in
More informationPollution Prevention Metrics Menu
Pollution Prevention Metrics Menu Prepared by the Northeast Pollution Prevention Roundtable April 1, 1999 Northeast Waste Management Officials Association 129 Portland Street 6 th floor Boston, MA 02114
More informationIncident Investigation
Incident Investigation Richard Kohlhausen, Capital Risk Management Ronald Sawchak, ARM CNA Insurance Companies Slide 1 Welcome Incident investigation is a core safety program element Program overview Focus
More informationLincoln County Position Description. Date: January 2015 Reports To: Board of Health
Lincoln County Position Description Position Title: Director-Health Officer Department: Health Department Pay Grade: Grade 16 FLSA: Non-Exempt Date: January 2015 Reports To: Board of Health GENERAL SUMMARY:
More informationAUTOMATED EXTERNAL DEFIBRILLATOR IN THE SCHOOL SETTING
Hitchcock Independent School District Carla Vickroy Superintendent AUTOMATED EXTERNAL DEFIBRILLATOR IN THE SCHOOL SETTING 2014-2015 1 TABLE OF CONTENTS AUTOMATIC EXTERNAL DEFIBRILLATOR (AED) PROGRAM...
More informationINSTRUCTION FOR COMPLETING COMPETITIVE SOLICITATION ACKNOWLEDGEMENT FORMS
INSTRUCTION FOR COMPLETING COMPETITIVE SOLICITATION ACKNOWLEDGEMENT FORMS The Competitive Solicitation Acknowledgement Form must be completely filled in. This may be done on line then printed or you may
More informationMidwest OSHA Education Centers
www.kirkwood.edu/ce Midwest OSHA Education Centers 2010-2011 OSHA Training Institute Courses Kirkwood Community College National safety council, greater Omaha Chapter St. Louis University 2010-2011 OSHA
More informationINCIDENT INVESTIGATION PROGRAM
INCIDENT INVESTIGATION PROGRAM 1.0 PURPOSE The purpose of this program is to prevent the recurrence of an incident and to eliminate or minimize the risks associated with the incident. 2.0 SCOPE This procedure
More informationAttachment J-8 Contractor / Supplier Submittal Register
Contractor / Supplier Register Number Title Technical Bid Package Subcontractor Request Form Labor Agreement Letter of Assent Proposal s L G 14 ACC Procurement s,,, Proc. File B H (7) 14 APP Proc. File
More informationUniversity of Notre Dame. Safety Program. Department of Physics Nieuwland Science Hall Eddy Street Lab.
University of Notre Dame Safety Program Department of Physics Nieuwland Science Hall Eddy Street Lab. Christopher Kolda, Department of Physics, ckolda@nd.edu Steven Ruggiero, Department of Physics, sruggier@nd.edu
More informationSpring Quarter, 2014, 4 credits for ENVH 560 / 3 Credits for ENVH 460, 11 weeks
Course Syllabus ENVH 460/560 Occupational Safety Management Canvas.uw.edu Spring Quarter, 2014, 4 credits for ENVH 560 / 3 Credits for ENVH 460, 11 weeks Time: Tuesday, 10:30 1:20 pm (ENVH 460) 10:30-2:20
More informationIs a smoke free workplace. Position Description. Staff Development Officer (SDO) Full Time. Nursing. In accordance with the relevant award.
Is a smoke free workplace Position Description Position: Staff Development Officer (SDO) Date: 9 th September 2013 Classification: Registered Nurse - Grade 4 Employment Status: Full Time Department: Conditions:
More informationVET in School Prospectus
VET in School Prospectus 2018 2017 Kingston and Employment Pty Ltd T/As Provider No. 6811 CRICOS No. 02899B Copyright Information Copyright 2017 Kingston and Employment Pty Ltd Provider no 6811 Trading
More informationA World Class Leader in Training and Development. Safety Training. Safety Training. Global Learning Services
Page 1 Content A World Class Leader in Training and Development 1. General Health & Safety Page 3 2. Advanced Health & Safety Page 4 3. Health & Safety Representative Page 5 4. Incident Accident Investigation
More informationFlorida State Courts System Class Specification. Class Title: Chief Deputy Marshal Supreme Court. Class Code: General Description
Florida State Courts System Class Specification Class Title: Chief Deputy Marshal Supreme Court Class Code: 1500 Pay Grade 25 General Description The essential function of the position within the organization
More informationCHARLOTTE COUNTY PUBLIC SCHOOLS JOB DESCRIPTION. MANAGER / FOOD SERVICE OPERATIONS Pay Grade M
CHARLOTTE COUNTY PUBLIC SCHOOLS JOB DESCRIPTION MANAGER / FOOD SERVICE OPERATIONS 76013 Pay Grade M QUALIFICATIONS: 1. Experience: minimum of three (3) years of verified successful school food & nutrition
More informationUser-Service Manual Joerns Assist Handle Model F025
User-Service Manual Joerns Assist Handle To avoid injury, read user s manual before using. F025 Assist Handle leading bed evolution WOUND SOLUTIONS SAFETY SOLUTIONS DESIGN SOLUTIONS Important Precautions
More informationCONVENIENCE METAL FABRICATION ABRASIVES VENDING SOLUTIONS CORNER STORE RIGHT ON THE FLOOR
METAL FABRICATION ABRASIVES VENDING SOLUTIONS CORNER STORE CONVENIENCE RIGHT ON THE FLOOR Pre-selected product assortment for optimal coverage of popular applications Industry s best selection of abrasive
More informationMEDICAL CARE BRANCH DIRECTOR
Mission: Organize and manage the delivery of emergency, inpatient, outpatient, casualty care, behavioral health, and clinical support services. Position Reports to: Operations Section Chief Command Location:
More informationAutomatic External Defibrillator (AED) And Training Grant Program. For Community and Recreation Facilities 2015
Automatic External Defibrillator (AED) And Training Grant Program For Community and Recreation Facilities 2015 Application Deadline: May 31, 2015 1 Objective of the AED / Training Grant Program The objective
More informationPyroLance LLC. STANDARD OPERATING PROCEDURE
PyroLance LLC. STANDARD OPERATING PROCEDURE Section: Subject: Approved: Demo/Training Live Fire Training Exercises SOP: 1.00 October 24, 2012 Execute d: Revised: Casparus Seyffert VP Operations Table of
More informationCONVENIENCE CORNER STORE RIGHT ON THE FLOOR
Metal Fabrication Abrasives Vending Solutions CORNER STORE CONVENIENCE RIGHT ON THE FLOOR Pre-selected product assortment for optimal coverage of popular applications Industry s best selection of abrasive
More informationCareer and Technical Education
Career and Technical Education Health Care Manufacturing Construction Automotive South Tech North Tech MET Center Serving St. Louis for Over 40 Years About Applied Tech As the Adult Technical Education
More informationTRAINING & READINESS SUPPLEMENT FACILITY WATCH OFFICER (ENLISTED)
TRAINING & READINESS SUPPLEMENT FACILITY WATCH OFFICER (ENLISTED) Air Traffic Control Facility 28 Mar 2016 This supplement includes s (LTGs) and Local Qualification Standards (LQSs) for Marine Corps Air
More informationThe NHS complaints policy has been relocated from behind reception to in front of reception and font size has been increased.
Appendix A General Dental Practice: Practice: Improvement Plan Jamie Pugh Dental Health Ltd. Date of Inspection: 18 February 2015 Page Patient Experience Page 7 The NHS complaints process should be made
More informationESSENTIAL SAFETY RESOURCES
ESSENTIAL SAFETY RESOURCES ADM-1005 INCIDENT INVESTIGATION AND REPORTING Rev. 0 Effective Date: Originator: Safety Advisor s Signature: Type Name Approval: HSE Manager s Signature: Type Name Approval:
More informationAmerican Academy of Dermatology SHADE STRUCTURE GRANT PROGRAM
American Academy of Dermatology SHADE STRUCTURE GRANT PROGRAM APPLY FOR A SHADE STRUCTURE Thank you for your interest in the American Academy of Dermatology s (AAD) Shade Structure Program. This informational
More informationLSSU An Economic Piston for the EUP and Beyond
LSSU An Economic Piston for the EUP and Beyond David Roland Finley, Ph.D., P.E. Dean, Business & Engineering Eric R. Becks, M.S. Dir. Intellectual Property & Economic Development 1 Where is LSSU? 2 BATCHEWANA
More informationWorkshop Proposal Form
Workshop Proposal Form 2017 SOFT-TIAFT Joint Meeting Boca Raton, Florida Proposal due March 15, 2017 INSTRUCTIONS Complete the workshop proposal form in its entirety. Submit workshop proposal form electronically
More informationHealth and Safety Plan
Health and Safety Plan Mission Statement: The mission of Manatee Technical College is to produce highly skilled individuals and resourceful leaders through collaborative education to meet the ever-changing
More informationPROCEDURE 806 HEALTH AND SAFETY
PROCEDURE 806 HEALTH AND SAFETY I. Administration For the purpose of implementing Policy 806 Health and Safety, the District has assigned the following responsibilities: A. Employees Employees will: 1.
More informationPOLICIES GOVERNING RESEARCH AT THE SODA SPRINGS DESERT STUDIES CENTER
POLICIES GOVERNING RESEARCH AT THE SODA SPRINGS DESERT STUDIES CENTER Introduction. It is the policy of the Board of Governors of the California Desert Studies Consortium to encourage and facilitate research
More informationDMACC Workforce Training Academy Vocational Training Programs
DMACC Workforce Training Academy Vocational Training Programs Are you looking for a rewarding career but need additional training? DMACC s Workforce Training Academy can help. Certificate classes provide
More informationBLACKFEET TERO OFFICE INDIAN JOBS SKILLS BANK PLEASE PRINT LEGIBLY NAME: ADDRESS: CITY/STATE/ZIP CODE: PHONE NUMBER: CELL NUMBER: MESSAGE:
BLACKFEET TERO OFFICE INDIAN JOBS SKILLS BANK PLEASE PRINT LEGIBLY NAME: ADDRESS: CITY/STATE/ZIP CODE: PHONE NUMBER: CELL NUMBER: MESSAGE: MALE FEMALE ARE YOU 18 YEARS OR OLDER? DATE OF BIRTH: ARE YOU
More informationEmployment Application Form
Employment Application Form YOUR APPLICATION WILL BE KEPT ON FILE UNTIL POSTIONS BECOME AVAILABLE Please fill out electronically and SAVE when completed (changes will be lost if you don t save) and email
More informationAccident Prevention Process
page 8 of 44 Accident Prevention Process Accidents and injuries can be prevented, but it takes planning, organizing, leadership and coordination to do so. Safety and health professionals have identified
More informationTeesside University Pre-registration Nursing Programme Preferred Option Information Booklet for Students (1209 onwards)
Teesside University Pre-registration Nursing Programme Preferred Option Information Booklet for Students (1209 onwards) Year one/stage one placement information: All Fields There are two long practice
More informationGasket Failure Causes Leak
Gasket Failure Causes Leak Lessons Learned Volume 04 Issue 35 2004 USW Gasket Failure Causes Leak Purpose To conduct a small group lessons learned activity to share information gained from incident investigations.
More information2016 Commercial Partner Information
2016 Commercial Partner Information To provide facilities and training that increase our members skills and allows them to build their dream projects using our precision equipment while fostering a sense
More information