THURSDAY 11:00-2:00 LUNCH: 12:00 pm - 1:00 pm 2-DAYS OF WEDNESDAY, APR IL 18, 2018 8:00 AM - 5:00 PM THURSDAY, APRIL 19, 2018 8:00 AM - 12:00 P M YOU ARE CORDIALLY INVITED to attend the Trade Show LOOK INSIDE FOR MORE INFORMATION
PARTICIPATING MANUFACTURERS Now Assa Abloy HPC, a Hudson Lock Company, Now Assa Abloy 2
DAY #1 - WEDNESDAY, APRIL 18, 2018 1 Basic Low Voltage Electricity for Installers 2 Advanced Electronic System Wiring & Basic Troubleshooting DATE: Wednesday, April 18, 2018 8:00 a.m. - 12:00 p.m. PRESENTER: Rodger Schmidt : Wyandotte Room DATE: Wednesday, April 18, 2018 1:00 p.m. - 5:00 p.m. PRESENTER: Rodger Schmidt : Wyandotte Room CREDITS OFFERED ALOA #AATP-AA007 NJCEU CREDITS OFFERED ALOA #AATP-AA007 NJCEU This entry level course is designed to educate the participants in the basic electronic knowledge needed to wire an electronic locking system. The class includes a balance of instructional and hands-on exercises. The following subjects are covered: Key Figures in Electricity Voltage, Current and Resistance AC & DC Electricity Switches and Relays Normally Open Normally Closed Circuits Fail Safe/Fail Secure lock wiring Hands-on basic system wiring and operation Series versus Parallel Wiring Use of Multi-meters How to test Multi-meter Circuit Testing for Volts & Amps Electronic Components This course is designed for participants with previous basic electronic knowledge and use of a multimeter. Covered in this course are advanced access control and system wiring techniques, installation and product troubleshooting. The class includes instructional and hands-on exercises covering the following subjects: Fire Alarm Interface Fail safe lock system wiring Fail secure lock system wiring Basic system trouble shooting - Using multi-meter Wiring trouble shooting - What you should test DK-26 and Power Supply Trouble shooting Magnetic lock and electric strike troubleshooting Touch sense bar troubleshooting Digital keypad troubleshooting Basic access control systems troubleshooting On-Site Registration for Classes: Space is limited and available on a first come, first served basis. Registration on-site may be allowed if there are openings. Pre-Registration is encouraged. APRIL 18, 2018 Class #1-8:00 am - 12:00 pm Class #2-1:00 pm - 5:00 pm Class #3-8:00 am - 5:00 pm 3
DAY #1 - WEDNESDAY, APRIL 18, 2018 3 Understanding Master Keying Training Class HPC, a Hudson Lock Company DATE: Wednesday, April 18, 2018 8:00 a.m. - 5:00 p.m. PRESENTER: Marty Jalove : Douglas Room Master Keying is a skill that everyone in the Physical Security Industry must understand. Knowing how to write and implement a system makes you essential to your employer s and customer s success. Knowing how to do this quickly and accurately makes you an extremely valuable asset. In this class, you will learn how to write a master key system. You will learn 3 different types of systems and when to use them. You ll learn to write a system on paper and in software. And you ll learn the fast key generating secrets that successful Locksmiths have been using for years. After taking this class with HPC, Hudson Lock, and IDN you will walk away with the ability to write master key systems and generate more business. Instructor: Marty Jalove, has been teaching master keying for over 15 years and has helped in the development of master keying software and the key machines that we ll be cutting keys on at this class On-Site Registration for Classes: Space is limited and available on a first come, first served basis. Registration on-site may be allowed if there are openings. Pre-Registration is encouraged. APRIL 18, 2018 Class #1-8:00 am - 12:00 pm Class #2-1:00 pm - 5:00 pm Class #3-8:00 am - 5:00 pm 4
DAY #2 - THURSDAY, 4 HES Electric Strikes Applications & Installation 5 Product Line Presentation DATE: Thursday, April 19, 2018 8:00 a.m. - 12:00 p.m. PRESENTER: Rodger Schmidt : Wyandotte Room CREDITS OFFERED ALOA #AATP-AA011 NJCEU, ALABAMA CEU, MISSISSIPPI CEU Students will be shown the easiest techniques for cutting and installing an electric strike into a hollow metal door frame. Cutting tool selection and use of the HES metal template kit is demonstrated. Students will be allowed to individually measure and cut in a strike. With instructional and hands-on exercises covering the following subjects: Codes and Standards Fire Rated verses non-fire rated Openings Electric strike application and selection Frame and door types Fail safe to fail secure conversion of HES strikes 12 to 24 volt strike conversion Solenoid testing and Trouble Shooting Installation techniques Safety Hands on installation of electric strikes DATE: Thursday, April 19, 2018 8:00 a.m. - 11:00 a.m. PRESENTER: Tony Presidio : Shawnee II & III COURSE DESCRIPTION: Present the features and benefits of Kaba Ilco & Advanced Diagnostics Products and what they can do for you. The class achieves this through a hands-on and lecture review on products and resources related to both product lines. TCODE & MVP PRO review Kaba-Ilco latest key cutting technology with emphasis on the New Futura Pro Kaba-Ilco latest transponder keys and cloning capabilities RW4 Plus advantages Smart Dongle & Smart 4 Car review and demonstration. Programming Software review through hands-on simulation Customer Equipment review and updates performed Hands On Programming Demonstrations Open discussion NOTES: Customers are encouraged to bring their Advanced Diagnostic Equipment for review if possible. On-Site Registration for Classes: Space is limited and available on a first come, first served basis. Registration on-site may be allowed if there are openings. Pre-Registration is encouraged. Class #4-8:00 am - 12:00 pm Class #5-8:00 am - 11:00 am Class #6-2:00 pm - 5:00 pm 5
DAY #2 - THURSDAY, 6 BEST Master Key Training Class DATE: Thursday, April 19, 2018 2:00 p.m. - 5:00 p.m. PRESENTER: Dan Stephens : Wyandotte Room 1. Interchangeable core keyway types provided by Best A. Standard B. Premium C. Preferred D. Cormax (keyway families and backwards compatability) 2. Best Key System types (A2, A3, and A4) 3. Creating key system hierarchies (utlizing the system types) 4. Key cuttng (hands on, time permiting) 5. Calculating pin segments for the core 6. Pinning the core (hand on, time permiting) 7. Troubleshooting keys and cores 8. Proper way to drill out a core if required 9. Keystone Web (time permiting) On-Site Registration for Classes: Space is limited and available on a first come, first served basis. Registration on-site may be allowed if there are openings. Pre-Registration is encouraged. Class #4-8:00 am - 12:00 pm Class #5-8:00 am - 11:00 am Class #6-2:00 pm - 5:00 pm 6
MAP N W E S IDN-H. Hoffman 11648 W. 90th St. 7
REGISTRATION Company Name: Acct. #: Address: City: State: Zip: Telephone: ( ) Fax: ( ) Email Address (Reminder Will Be Sent): REGISTRATION DEADLINE: APRIL 11 2018 Class Number (Place Check Mark in Box For All You Wish to Attend) First/Last Name Of Attendee (If only attending the Trade Show, Complete This Section & Check Trade Show Box At Right) 1/BASIC LOW VOLTAGE CLASS 4.18.18 2/ADVANCED ELEC- TRONIC CLASS 4.18.18 3/HPC MASTER KEY CLASS 4.18.18 4/ELECTRIC STRIKE CLASS 4.19.18 5/PRODUCT LINE PRESENTATION 4.19.18 6/BEST MASTER KEY CLASS 4.19.18 Attending Trade Show? 1. 2. 3. 4. YES YES YES YES NO NO NO NO Class Registration, Check One Box $35 00 Registration Price SINGLE PERSON, Unlimited Classes registration and payment must be received before 4.11.18 $65 00 Registration Price SHOP RATE, Unlimited Classes* registration and payment must be received before 4.11.18 Registration for classes will be complete ONLY when payment is received. Payment fees for classes cannot be billed on your IDN-H. Hoffman account. The class registration fee is non-refundable. *Pay one low price for your shop and send as many of your employees to as many classes as you want. TO REGISTER: 1. For the Trade Show: complete this form and FAX: (913) 599-4111 or EMAIL: charmon@idnhhoffman.com scottg@idnhhoffman.com 2. For attendance at Classes: Mail this form with payment to: IDN-H. Hoffman Att.: Marketing Dept. 7330 W. Montrose Ave Chicago, IL 60706 QUESTIONS: Shane Harmon at (913) 599-4111 or charmon@idnhhoffman.com or Scott Guetschow at (314) 614.5019 or scottg@idnhhoffman.com 8