Local 26 Educational Development Trust 1st and 2nd Quarters 2013 Training Schedule Apprenticeship A Labor Management Partnership
Local 26 Educational Development Trust Table of Contents Page 3-4: Contact/Location Information Page 5-11: Training Schedule Southwest Washington Pipe Trades Brothers and Sisters, As our year draws to an end, I would like to thank all of the membership of local 26 for helping make this a successful year at Southwest Washington Pipe Trades. I would like to give a special thank-you to my staff Elysha Peters, who does a tremendous job in helping me with all the work behind the scenes to make things happen. I would also like to give special thanks to my entire staff of instructors, whether currently working for us or not. These individuals perform day in and day out to the highest industry standards. They have filled in on short notice and gone above and beyond the call of duty to help train our membership! Their thankless dedication makes what we do in training possible! We will continue to do our best to support the training needs of our industry. When we are notified of an upcoming job requirement, we do our best to put together the training needed. Just like on the job, planning is the key to success. Sometimes we have to put a course together on short notice, so I would ask that you bear with us through that process. I am proud to announce the recent award received by one of our 5 th year plumbing apprentices, Shalma Wellington. She was the recent recipient of the award for Trades Woman of the Future, presented at the Ballard Elks Lodge by the Washington Women in the Trades organization. Congratulations Shalma! This also leads me to announce that there will be a women s support group established in 2013. This idea was brought to me by another outstanding apprentice, Adawnya Shields. Ms. Shields and Ms. Wellington both strongly support the idea, and will be instrumental in helping to get group established. The first meeting will be held on January 19, 2013 at our Lacey facility. The meeting is scheduled for 11 am, sort of a brunch if you will. The first meeting will be for getting to know one another, exchanging ideas and making plans for future meetings. We will be helping in getting that venture off the ground. The basic idea is to be a help and support line for new and current female apprentices, and to help actively recruit more women into the trade. Ms. Shields and Ms. Wellington will be looking for all the help and support possible from our Journey level women also to help make this idea a reality. I have volunteered to help disseminate information and help establish the first meeting here in Lacey. We will be happy to accept phone calls and help pass contact information as requested. We can only pass on contact information if an individual leaves it with us. Company policy prohibits passing out information without written permission from the individual. In closing, I am encouraged looking forward. I believe that the next generation of UA mechanics being trained will carry on our proud tradition. I am pleased to be a part of that future! Elmer Arter Coordinator Southwest Washington Pipe Trades 2
Local 26 Educational Development Trust David McMichael Annette Hampson Trust Administrator Administrative Assistant dave@local26training.org annette@local26training.org 360-486-9401 360-486-9401 Northwest Washington Pipe Trades 780 Chrysler Drive Burlington, WA 98233 Gary Peterson Coordinator gary@local26training.org 360-486-9442 Janice Buben Office Assistant janice@local26training.org 360-486-9441 Southwest Washington Pipe Trades 8501 Zenith Court NE Lacey, WA 98516 Elmer Arter Coordinator elmer@local26training.org 360-486-9402 Elysha Peters Office Assistant elysha@local26training.org 360-486-9400 West Sound Pipe Trades 7725 NW Eldorado Blvd Bremerton, WA 98312 Larry Durdahl Coordinator larry@local26training.org 360-486-9472 Southwest Washington Pipe Trades Training Center Location: 1135 3rd Ave Longview, WA 98632 Lower Columbia College (LCC) (Map on next page): Don Talley Building 1600 Maple St Longview, WA 98632 Terry Boudreau Assistant Coordinator terry@local26training.org 360-636-6066 3
If you do not see a class offered that you would like to take, please, call one of our training facilities to inquire about being placed on a waiting list. If we end up with enough interest for a particular class and an instructor is available, we will do our best to accommodate the on-going needs in the trades. Below is a sample list of classes that may be of interest: AUTO CADD INSTRUMENTATION BASIC ELECTRICITY LEVEL 1 INSTRUMENTATION CERT BUILDERS LEVEL TRANSIT RELATED MATHEMATICS BUILDING LAYOUT ORBITAL WELDING CFC OSHA 10/30 CO2 REFRIGERATION SYSTEMS OXY-ACETYLE COLLECTIVE BARGAINING RIGGING COMET SIGNALPERSON CERT. DRAINAGE SOLDERING & BRAZING DRAWING INTERPRETATION STEAM SYSTEMS GREEN AWARENESS TUBE BENDING HYDRONICS 4
C-Stop Refresher This 4 hour class provides a safety certification which is good for a two (2) year period. *This course provides (4) hours of industry related plumbing (IRP) training for the WA State Plumbers Continuing Education requirements. Instructor: Tom Banks, Curtis Middleton or Gary Peterson 8:00 AM 12:00 PM January 5th February 2nd March 2nd April 6th May 4th June1st Location: SWWPT Lacey Instructor: Bob Gates / Jay Clevenger Dates/Time: 8:00 AM 12:00 PM January 12th March 9th May 11th Location: SWWPT Longview LCC Don Talley Building Room 232 Instructor: Kelsie Jacobson Dates/Time: 8:00 AM 12:00 PM February 2nd April 6th June 1st *There must be a minimum of 5 people to run a C-STOP class. Please sign up ahead of time to allow us to prepare the course. C-Stop This 6 hour class provides a safety certification which is good for a two (2) year period. *This course provides (4) hours of industry related plumbing (IRP) training for the WA State Plumbers Continuing Education requirements. Instructor: Tom Banks, Curtis Middleton or Gary Peterson 8:00 AM 2:00 PM January 12th February 9th March 9th April 13th May 11th June 8th Instructor: Bob Gates or Jay Clevenger Dates/Time: 8:00 AM 2:00 PM January 19th March 16th May 18th Location: SWWPT Longview LCC Don Talley Building Room 232 Instructor: Terry Boudreau or Kelsie Jacobson 8:00 AM 2:00 PM February 9th April 13th June 8th 5
First Aid/CPR This class will certify individuals for a two (2) year period, please remember all instructors and foremen are required to have a current CPR card. * This course provides (4) hours of industry related plumbing (IRP) training thru WA State Plumbing Continuing Education. *There must be a minimum of 10 people to run a First Aid/CPR class. Please sign up ahead of time to allow the training staff to prepare the course. Location: WSPT Bremerton 7715 Eldorado Blvd, Bremerton WA 98312 Instructor: Bob Hamilton Monday 6:00PM - 10:00PM February 11th April 8th Instructor: George Schoettle March 16th Instructor: Ron Cleveland 8:00 AM 4:00 PM March 30th June 29th SOUTHWEST WASHINGTON PIPE TRADES HVAC/R 06A Trainee Card Holders Continuing Education *There must be a minimum of 5 people signed up to run any course. Please sign up ahead of time to allow us to prepare the course. Electrical Basics (8-Hours) CEC Credit will only be given for electrical trainees Dates: March 2nd Day: Time: 8:00 AM 4:30 PM HVAC/R Continuing Education Course: This class provides (8) hours of Electrical continuing education credits with the State of Washington HVAC/R-06A Specialty Electrical License division to support the renewal of your trainee card. Bring your electrical trainee card to verify the card number to receive proper credit. Licensed electricians must attend the journeyperson continuing education classes. Electrical Currents (8-Hours) CEC Credit will only be given for electrical trainees, Todd Butler or Joe Halbig Dates: March 16th Day: Time: 8:00 AM 5:00 PM HVAC/R Continuing Education Course: This class provides (8) hours of Electrical continuing education credits with the State of Washington HVAC/R-06A Specialty Electrical License division to support the renewal of your trainee card. Bring your electrical trainee card to verify the card number to receive proper credit. Licensed electricians must attend the journeyperson continuing education classes. 6
SOUTHWEST WASHINGTON PIPE TRADES HVAC/R Journeyperson Continuing Education The following 4 classes fulfill the 24 hour Continuing Education requirement to renew your Electrical license. *There must be a minimum of 5 people signed up to run any course. Please sign up ahead of time to allow us to prepare the course. HVAC/R Grounding & Bonding (8-Hours) Dates: February 2nd Day: Time: 8:00 AM - 5:00 PM HVAC/R Continuing Education Course; This 8- hour class is designed to provide participants an update/refresher of the State of Washington Rules and Regulations as they pertain to the HVAC/Refrigeration Industry. This class provides (8) hours of Electrical Related credits with the State of Washington HVAC/R-06A Specialty Electrical License Continuing Education Courses. Bring 06A Licenses to verify card number to receive proper credit 2008 NEC Analysis of Changes (8-Hour) Day: Dates: February 16th Time: 8:00 AM - 5:00 PM HVAC/R Continuing Education Course; This 8- hour class is designed to provide HVAC Mechanics with information pertaining to the current National Electrical Code and interpret any changes/additions to the code. This class provides (8) hours of Electrical Related credits with the State of Washington HVAC/R-06A Specialty Electrical License Continuing Education Courses. Bring 06A Licenses to verify card number to receive proper credit. Electrical Currents (4-Hours) Dates: April 13th Day: Time: 8:00 AM 12:00 PM HVAC/R Continuing Education Course; This 4- hour class is an overview of industry related issues that were documented in the Electrical Currents newsletter that is published by the Washington State Department of Labor and Industries. This class provides (4) hours of Electrical Related credits with the State of Washington HVAC/R-06A Specialty Electrical License Continuing Education Courses. Bring 06A Licenses to verify card number to receive proper credit. RCW/WAC Regulations Update (4-Hours) Dates: April 13th Day: Time: 12:30 PM 4:30 PM HVAC/R Continuing Education Course; This 4- hour class is designed to provide participants an update/refresher of the State of Washington Rules and Regulations as they pertain to the HVAC/Refrigeration Industry. This class provides (4) hours of Electrical Related credits with the State of Washington HVAC/R-06A Specialty Electrical License Continuing Education Courses. Bring 06A Licenses to verify card number to receive proper credit. 7
Plumber s Continuing Education UPC Refresher The participants will be able to analyze and interpret any change added to the current 2009 UPC Plumbing Code including Washington State Amendments. This course provides a complete synopsis of major code changes and furnishes the participants with an overview of what is new in the latest plumbing code requirements. This class provides 12 hours of Code Update credits (8-hrs Code & 4-hrs IRP) with the State of Washington Plumber Continuing Education. Instructor: Tim Murcray or Ralph Saragina 8:00 AM - 2:00 PM March 2nd & March 9th Instructor: Ben Tolbert or Aaron Souza Tuesday/Thursday 6:00 PM -10:00 PM January 22nd, 24th & 29th June 18th, 20th & 25th Location: SWWPT Longview LCC Don Talley Building Room 232 Instructor: Terry Boudreau or Mert Barney Monday/Wednesday 6:00 PM - 10:00 PM February 18th, 20th & 25th *There must be a minimum of 5 people signed up to run any course. Please sign up ahead of time to allow us to prepare the course. UPC Code Update Instructor: Larry Durdahl Dates: March 11th & 13th May 13th & 15th Location: WSPT Bremerton Days: Monday & Wednesday Time: 6:00 PM - 10:00 PM The participants will be able to analyze and interpret any change added to the current 2009 UPC Plumbing Code including Washington State Amendments. This course provides a complete synopsis of major code changes and furnishes the participants with an overview of what is new in the latest plumbing code requirements. This class provides (8) hours of Code Update credits with the State of Washington Plumber Continuing Education Courses. Water Systems Instructor: Tim Murcray Dates: January 5th & 12th May 4th & 11th Day: Times: 8:00 AM 2:00 PM This 12 hour class will train individuals in water system installations and how these systems apply to the 2009 UPC. *This course provides 12 hours of plumbing code (CODE) for WA. State Plumber Continuing Education. Remember: The C-STOP courses and the First Aid classes also provide 4 hours of Industry Related Plumbing continuing education credit to support the plumbing licensing renewal requirement. Please read the class description carefully. 8
This course will provide electrical safety training for our members with emphasis on the plumber in the commercial and residential service industry. *This class provides (4) hours of industry related electrical (IRE) training thru WA. State Plumber Continuing Education. Instructor: Vicki Hadley Wednesday 6:00 PM -10:00 PM January 9th March 13th May 8th Electrical Safety Location: WSPT Bremerton Instructor: Larry Durdahl 6:00 PM 10:00 PM Wednesday: February 13th Thursday: April 11th Electrical Safety II Hot Water Heaters 6:00 PM 10:00 PM January 31st June 27th Location: SWWPT Longview LCC Don Talley Building Room 232 Wednesday 6:00 PM -10:00 PM February 27th Medical Gas Continuity To keep your Medical Gas Card current and at no cost, a brazing procedure must be performed and documented every 6 months. The Med-Gas Braze can be documented by either a continuity filled out by the contractor you are working for or by performing a braze continuity at the training center. CHECK YOUR EXPIRATION DATES!!!! Instructor: Howard Ammons/Jeff Hurlbert 1st Thursday of the Month 4:30 PM - 7:30 PM January 3rd February 7th March 7th April 4th May 2nd June 6th Instructor: Duke Johnson 1st Thursday of the Month 4:00PM - 6:00 PM January 3rd February 7th March 7th April 4th May 2nd June 6th Location: WSPT Bremerton Instructor: Larry James 9:00 AM - 11:00 AM February 16th March 16th April 20th June 15th Medical Gas Continuities may be performed during UA Weld Test Sessions (Page 11) 9
United Association Certifications *There must be a minimum of 5 people signed up to run any course. Please sign up ahead of time to allow us to prepare the course. UA RIGGING CERTIFICATION: Instructor: Jack Baker Dates: April 13th, 20th, 27th, May 4th, 11th, 18th, & 25th Day: Time: 8:00 AM - 4:00 PM IPT s Crane and Rigging handbook must be purchased by each participant prior to this class. This book is $16.00 and is available at the Northwest Washington Pipe Trades Training Center. NCCCO SIGNALMAN CERTIFICATION: Instructor: Jack Baker Dates: March 23rd, 30th, April 6th Location: NWWPT BURLINGTON Day: Time: 8:00 AM 4:00 PM The signal person training course study guide is required for this course. This book is $18.00 and can be purchased at the training center Exams must be ordered 4 weeks in advance. Deadline for signup for this class is February 22, 2013. Class is limited to 18 participants NCCCO SIGNALMAN CERTIFICATION: Instructor: Kevin Dolan or Jay Clevenger Day: Monday/Wednesday; (Test) Dates: April 29th, May 1st, 6th, 8th Time: 6:00 PM 9:30 PM Test: May 11th The signal person training course study guide is required for this course. This book is $18.00 and can be purchased at the training center Exams must be ordered 4 weeks in advance. Deadline for signup for this class is April 5, 2013. Class is limited to 18 participants More information can be found at www.uavip.org 10
Welding Practice Sessions *There must be a minimum of 5 people to run any course. Please sign up by Wednesday to allow us to prepare the session. Instructor: Richard Powell, Greg Heath, Steve Mayervich or Bruce Savage Time: 8:00 AM - 12:00 PM Dates: January 12th & 19th; February 9th, 16th, & 23rd; March 9th & 16th; April 13th, 20th, & 27th; May 11th; June 8th & 15th Location: SWWPT Longview Instructor: Austin Greene or Patrick Byrnes Time: 8:00 AM - 2:00 PM Dates: January 12th & 19th, February 9th & 16th, March 9th & 16th, April 13th & 20th, May 4th & 11th, June 8th & 15th Instructor: Jay Clevenger, or Kevin Dolan Time: 8:00 AM - 2:00 PM Dates: January 12th & 19th, February 9th & 16th, March 9th & 16th, April 13th & 20th, May 4th & 11th, June 8th & 15th Location: WSPT Bremerton Instructor: Mike Murphy Time: 8:00 AM - 12:00 PM Dates: January 12th, February 9th, March 9th, April 13th, & May 11th United Association Weld Testing and Continuity Medical Gas Continuities may be performed during these UA Weld Test Sessions NWWPT BURLINGTON WSPT BREMERTON ATR: Richard Powell, Bruce Savage or Steve Mayervich 8:00 AM 3:00 PM January 5th March 2nd May 4th WABO testing is also available at the Northwest Washington Pipe Trades Training Center. ATR: Larry Durdahl or Mike Murphy 8:00 AM 3:00 PM February 16th March 16th April 20th June 15th SWWPT LACEY SWWPT LONGVIEW ATR: Kevin Dolan, Jay Clevenger, Mike Murphy, Mike Stull or Elmer Arter 8:00 AM 3:00 PM January 26th March 23rd May 18th ATR: Jeff Erskine Jr., Jay Clevenger or Pat Byrnes 8:00 AM 3:00 PM February 23rd April 27th June 22nd 11
12