NOTE TO USERS NI xx Pinout Labels for the SCB-A Output Modules/Devices Using the -Pin Shielded Connector Block If you are using an NI xx (formerly referred to as AO Series) analog output device or module with the SCB-A, you can print and attach a connector-specific pinout label to the cover of the connector block for easy connection reference. This document provides labels for the following models: NI 0 NI 0 NI NI NI NI NI NI NI NI NI
Use the following label if you are connecting the SCB-A to the NI 0 model. Figure. NI 0 / 0 AO 0 (V) AO (V) AO (V) /* 0 AO (V) AO (V) P0. AO (V) /* P0. AO (V) AO (V) RESERVED AO (V) P0. AO (V) AO (V) P0. 0 AO (V) 0 RESERVED P0. AO (V) /* AO 0 (V) AO (V) P0. 0 0 0 AO (V) D0. /* SCB-A Quick Reference Label NI 0 AO Series S S *: Connected to Ground on NI 0; No Connect () on SH--D cable. ni.com NI xx Pinout Labels for the SCB-A Note To Users
Use the following label if you are connecting the SCB-A to the NI 0 model. Figure. NI 0 / 0/ / AO (I) AO 0 (V) AO (V) AO (V) /* AO (I) AO (I) 0 / / / AO (I) AO (V) AO (V) / P0. AO (I) AO (I) AO (V) / /* AO (I) P0. AO (V) AO (V) / RESERVED AO (I) / AO (V) P0. / AO (I) AO (I) AO (V) AO (V) / P0. AO (I) 0 / AO (V) 0 RESERVED /0 AO (I) AO (I) P0. AO (V) /* / AO 0 (I) AO 0 (V) AO (V) P0. / 0/ 0 AO (I) 0 AO (V) D0. AO (I) /* SCB-A Quick Reference Label NI 0 AO Series S S *: Connected to Ground on NI 0; No Connect () on SH--D cable. NI xx Pinout Labels for the SCB-A Note To Users National Instruments
Use the following label if you are connecting the SCB-A to the NI / models. Figure. NI / / P0. FREQ OUT AO P0. 0 CTR 0 OUT P0. AO P0. PFI /CTR 0 GATE PFI /CTR 0 SOURCE P0. AO 0 PFI P0. PFI /AO START TRIG AO PFI /AO SAMP CLK 0 AO EXT REF 0 CTR OUT EXT STROBE P0. PFI 0 PFI /CTR GATE 0 PFI PFI /CTR SOURCE 0 PFI SCB-A Quick Reference Label NI / AO Series S S *: No Connect ni.com NI xx Pinout Labels for the SCB-A Note To Users
Use the following label if you are connecting the SCB-A to Connector 0 of the NI /// models. Figure. NI /// Connector 0 / P0. FREQ OUT AO P0. 0 CTR 0 OUT P0. AO P0. PFI /CTR 0 GATE PFI /CTR 0 SOURCE AO P0. AO 0 PFI P0. PFI /AO START TRIG AO AO PFI /AO SAMP CLK 0 AO EXT REF 0 CTR OUT EXT STROBE AO P0. PFI 0 PFI /CTR GATE 0 PFI PFI /CTR SOURCE 0 AO PFI SCB-A Quick Reference Label NI /// AO Series CONNECTOR 0 S S *: No Connect NI xx Pinout Labels for the SCB-A Note To Users National Instruments
Use the following label if you are connecting the SCB-A to Connector of the NI model. Figure. NI Connector No Connect AO AO AO 0 AO AO AO AO AO 0 AO AO AO AO 0 AO AO AO AO 0 AO 0 AO AO AO AO AO 0 AO 0 AO SCB-A Quick Reference Label NI AO Series CONNECTOR S S *: No Connect Note: This pin mapping only applies to the second SH-C-S cable when used with the NI device. ni.com NI xx Pinout Labels for the SCB-A Note To Users
Use the following label if you are connecting the SCB-A to Connector 0 of the NI / models with the SHC--A cable. Figure. NI / Connector 0 with SHC--A Cable / / AO 0 AO AO AO AO AO 0 //0 / / AO /P0. AO AO / P0. AO AO AO PFI 0/ / AO PFI 0/P.0 AO AO / PFI /P. AO / AO PFI /P. / AO AO PFI / AO AO / PFI /P. AO 0 / AO 0 PFI /P. / AO AO PFI /P. AO 0/ PFI / AO AO AO PFI /P. 0/ 0 AO 0 PFI / 0 AO PFI /P. AO 0 SCB-A Quick Reference Label NI / AO Series with SHC--A Cable CONNECTOR 0 S S Refer to Figure if you are using the NI / with the SH-C-S cable and NI PXIe- Adapter or NI PXIe- Adapter. NI xx Pinout Labels for the SCB-A Note To Users National Instruments
Use the following label if you are connecting the SCB-A to Connector of the NI model with the SHC--A cable. Figure. NI Connector with SHC--A Cable / 0/ AO AO AO AO AO AO 0 0 0// P0. 0/ / AO 0 P0./P0. AO AO / P0. AO 0 AO AO PFI / / AO PFI /P.0 AO AO / PFI /P. AO / AO PFI 0/P. / AO AO PFI 0/ AO AO / PFI /P. AO 0 / AO 0 PFI /P. / AO AO PFI /P. AO / PFI / AO AO AO PFI /P. / 0 AO PFI / 0 AO PFI /P. AO SCB-A Quick Reference Label NI AO Series with SHC--A Cable CONNECTOR S S *: No Connect Note: Refer to the NI / User Manual for AO bank information. Refer to Figure if you are using the NI with the SH-C-S cable and NI PXIe- Adapter. ni.com NI xx Pinout Labels for the SCB-A Note To Users
Use the following label if you are connecting the SCB-A to Connector 0 of the NI / models with the SH-C-S cable and NI PXIe- Adapter or NI PXIe- Adapter. Figure. NI / Connector 0 with SH-C-S Cable and NI PXIe-/ Adapter / / AO 0 AO AO AO AO AO 0 //0 / / AO /P0. AO AO / P0. AO AO AO PFI 0/ / AO PFI 0/P.0 AO AO / PFI /P. AO / AO PFI /P. / AO AO PFI / AO AO / PFI /P. AO 0 / AO 0 PFI /P. / AO AO PFI /P. AO 0/ PFI / AO AO AO PFI /P. 0/ 0 AO 0 PFI / 0 AO PFI /P. AO 0 SCB-A Quick Reference Label NI / AO Series with SH-C-S Cable and Adapter CONNECTOR 0 S S Note: Refer to the NI / User Manual for AO bank information. NI xx Pinout Labels for the SCB-A Note To Users National Instruments
Use the following label if you are connecting the SCB-A to Connector of the NI model with the SH-C-S cable and NI PXIe- Adapter. Figure. NI Connector with SH-C-S Cable and NI PXIe- Adapter / 0/ AO AO AO AO AO AO 0 0 0// P0. 0/ / AO 0 P0./P0. AO AO / P0. AO 0 AO AO PFI / / AO PFI /P.0 AO AO / PFI /P. AO / AO PFI 0/P. / AO AO PFI 0/ AO AO / PFI /P. AO 0 / AO 0 PFI /P. / AO AO PFI /P. AO / PFI / AO AO AO PFI /P. / 0 AO PFI / 0 AO PFI /P. AO SCB-A Quick Reference Label NI AO Series with SH-C-S Cable and Adapter CONNECTOR S S Note: Refer to the NI / User Manual for AO bank information. Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patents Notice at ni.com/patents. You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer to the Export Compliance Information at ni.com/legal/export-compliance for the NI global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject to the applicable limited rights and restricted data rights as set forth in FAR.-, DFAR.-0, and DFAR.-0. 0 National Instruments. All rights reserved. 0A-0 Mar