Operations Specifications Table of Contents Part A HQ CONTROL DATE EFFECTIVE DATE AMENDMENT NUMBER 001 Issuance and Applicability 02/11/2016 02/17/2016 13 002 Definitions and Abbreviations 02/11/2016 02/17/2016 8 003 Ratings and Limitations 01/30/2004 08/20/2015 12 004 Summary of Special Authorizations and Limitations 09/23/1998 11/20/2013 9 007 Designated Persons 12/19/2006 02/04/2015 9 025 Electronic/Digital Recordkeeping System, Electronic/Digital Signature, and Electronic Media 11/16/2004 11/18/2016 2 449 Antidrug and Alcohol Misuse Prevention Program 07/17/2009 06/03/2016 2 Camtronics LLC Part A-1 Print Date: 11/18/2016 Certificate No.: D8XR913Y
Operations Specifications Table of Contents PartD too \Vork to be Performed at a Place Other Than the Repair Station Fixed Location(s) HQCONTROL DATE ll/l6/2004 EFFECTIVE DATE 08/I0/2011 AMENDMENT NUw!BER 7 Print Dale: 8/10/2011 Part D Camtronics LLC Certilicate No.: D8XR913Y
Operations Specit1cations A003. Ratings and Limitations HQ Control: 01/30/2004 HQ Revision: 010 The Certificate Holder is authorized the following Ratings ancvor Limitations: Class Ratings Accessory Class! : Mechanical Accessories Accessory Class 2: Electrical Accessories Accessory Class 3: Electronic Accessories Limited Ratint{S Rating Airframe Manufacturer Capability List. as Make/Model List, as Limitations Perform installation ofradio/navigatiojwl systems in aircraft. including antennas perform removal and replacement of radios. instmments, and accessories for as limited by the ratings. Perform tests required by! 4CFR P<HI 9 I.411 in accordance with 14CFR Part43, appendix E. Pcrfonn tests required by 14CFR Part 91.413 in llccrdancc with 14CFR Part 43, appendix F. Instruments Capability List. as C\1pability List. as Inspect, repair, overhaul test in accordance with the current component nwnufacturers maintenance Manuals and/or repair specifications listed in the specialized services section of this document. Radio Capability List, as Capability List, as Inspect. repair, overhaul, test in accordance with the current component manufacturers maintenance Manuals and/or repair spccifh:ations listed in the specialized services section of this document Emergency Equipment Capability List, us Capability List. as Inspect. repair, overhaul, test in accordance with the current component manufacturers maintenance Nondestructive Inspection, Testing, and Processing Capability List. as amendl'd. Capability List, as Dye penetrant testing in accordance with Camtronics procedures R24, 825, and 826. Limited Ratings- Specialized Services Rating Specifications Limitations Cam Ironies LLC A003-l Amdt. No: 12 Certificate :.!o.: OBXR9l3Y
Operations Speci fica I ions Rating Specifications Welding CWS-01 I 512 Camtroics weld procedure and A WS-D 17.I American welding society-specification for welding of aerospace applications. Limitations Usc the methods, techn iques. and practices prescribed in the current manufacturers maintenance manual or Instructions for Continued Airworthiness, or other methods, techniques, and practi ces acceptable to the Administrator. Limited Specialized Services. continued. Tile.following is a list ofcomponems and the associated Camtronics repair specifications thai may be used to repair those components. Valve duci--ca M-033 V. Wafer tank--ca Al/-24 5. TCAS mlll!nna--cam-0071. Light dimmer--ca M-233A, Vacuum genera/or--ca M-03 75. Seal actumor a//(/ DC motor--ca M-0490, Chari lwlder--ca M-5 I 3, A udiolcommunicaliom face plale--ca M-1 I I 2, An!enna--CAM- 1171. TCAS anlenna--ciiat/- 1 I 72, G P Sl X M/W AA S/G NSS/Iridi um/satcom/l-band/k U -band/ A R I NCISI R I S!G lobals 1ar/F I ight il!(o/ma GR/ PLGR/Choke amemw--ca M-1575. Dimmer PC board--cam-1646, ADF antenna- -CAM-I 7 I 2. Ba11e1y pack--ca M-20/3, Water sensor probe--cam-2534, ELT mllenna--ca J'vl- 2718, Audio control panei--ca M-2 788. S1robe light--ca M-29 20, Drain mast--cam-3 160. Co.fle maker--ca M-35 I 0. TCAS cmtemw--ca M-4081. Audio panei--ca M-53 61. VHFIUHFIA TCIL-bmlci/Giideslope/Marker beac:on/coki/elt/vor/localizer/na VIDMEIC/Sbaud cmle11na--ca M-53 66, lnterphone lwndset--ca J\11-5583. Ballery pack--cam-57 3 7, DC motor--cam-6040, Fire dc:tector--ca M- 7122, Co_((ee/lm atviy pump--cam-7134, Galley oven--cam 8000, Radio altimeter cmlenna--ca M-870 I, TCAS antenna--ca M-89 73, VOR/Ivcalizer W/tenna--CAM-Div/23. Relay--CA M-SMI50D. Acluator and DC motor--cam T I 00. Thrust reversc:r ccmlmlunit--c A M-08ND, A ltemator drive coupling--ca lv/-6655. Drain mast--ca M-1!883. G PS antenna--ca,'v/- 1575. Flush acluator--ca,\.1-0 198. Drain mast--ca i\4-417 A, Flight lock actual or--ca J'v/-933D. Marker beacon--ca,\tl-/ 903. Drainmvst--CA IVI- 2093, High gain antemw--ca M-21 02. Droin mas1--ca M-2 190. Drain mast--ca M-280 I. AI lema/or dril'e lvf-5796, TClvf oil coolers--cam-6000, Oillel'el sensor--cam-.1146. Relay--CA M-SM 150D, Armature rewind--ca M-TI TW. I. The Certificate Holder applies for the Operations in this paragraph. 2. These Opcralions Specifications arc npprovcd by direction of the Administrator. Digitally signed by Thomas D Doerner. Principal /\ vionics Inspector (S\V 15) m' EFFECTIVE DATE: 8/20/20 15, [2] AMENDMENT #: 12 DATE: 20 15.08.20 06: 10:34-05:00 Campbell, David E. President -#>/' Date Camtrontcs LLC A003-2 /\mdt. :-.Jo: 12 Certificate No.: D8XR9 13Y
Operations Specifications A004. Summary of Special Authorizations and Limitations HQ Control: 09/23/1998 HQ Revision: 010 a. The certificate holder, in accordance with the reference paragraphs, is authorized to: Use an approved electronic recordkeeping system, electronic/digital signature, and/or electronic media. Reference Paragraphs A025 Conduct operations choosing to have an antidrug and alcohol misuse prevention A 449 program. Perfom; work, excluding at rts prunary FIXed LocatiOn. operations, at additional locations other than DIOO b. The certificate holder is not authorized and shall11ot: Use Exemptions. Reference Paragraphs A005 Perform maintenance with NAA ratings where the scope of work is authmized A0 6 0 by a BASAJMIP. Perform work, including continuous operations, at additional locations other than A!Ol at its primary fixed location. Perform maintenance in accordance with foreign repair station geographic authorizations. B050 Perform line maintenance for cert. holders conducting operations under Pat1s 121 and 135 and for foreign carriers/persons operating U.S. registered aircraft in DlO? conunon cattiage under Part 129, apart from DlOO which authorizes that work away from station. Camtronics LLC A004-l Amdt. No: 9 Certificate No.: D8XR913Y
Operations Specifications l. Issued by the. 2. These Operations Specifications are approved by direction of the Administrator. Digitally signed by Thomas D Doerner, Principal Avionics Inspector (SW 15) [I] EFFECTIVE DATE: 11120/2013, [2] AMENDMENT#: 9 DATE: 2013.11.20 15:04:20-06:00 Campbell, David E., FAA Accountable Manager, 145 /I!M Date Camtronics LLC A004-2 Amdt. No: 9 Certificate No.: D8XR9 13Y
Operations Specifications A007. Designated Persons HQ Control: 12/ 19/2006 HQ Revision: 030 a. The personnel listed in the following table arc designated to officially apply for and receive operations specifications for the certificate holder indicated below. Table 1 -Designated Persons to Apply for and Receive Authorizations Title Name Parts Authorized FAA Accountable Manager, 145 I President Campbell, David E. A,D Agent for Service I President Campbell, Richard E. A,D EASA Accountable Manager, 145 I President Campbell, David E A,D Director of Quality Assurance Eller, Blake A,D b. The following personnel listed in Table 2 are designated by the certificate holder to receive lnfonnation for Operators (INFO) messages for the certificate holder as indicated below. A receipt for the information by an operator or person is not required. Table 2 - Designated to Receive IN FO Messages Name Email Address Telephone No. Type of Information to Hcccivc Campbell, David E. dcampbell@camtronicsllc.com 918-299-5 148 ALL Eller, Blake beller@camtronicsllc.com 91 8-299-5 148 ALL I. Issued - by the. 2. These Operations Specifications are approved by direction of the Administrator. Digitally signed by Thomas D Doerner, Principal Avionics Inspector (SW1 5). [ I] EFFECTIVE DATE: 2/4/201 5, [2) AMENDMENT#: 9. DATE: 2015.02.04 10:26:53-06:00 3. I hereby accept and receive the Operations Specifications in t!jis paragraph. Ell er, Blake, Director of Quality Assurance Date Camtronics LLC A007- l Amdt. No: 9 Certificate No.: D8XR91 3Y
Operations Specifications A025. Electronic/Digital Recordkeeping System, Electronic/Digital Signature, and Electronic Media HQ Control: 11/16/2004 HQ Revision: 00a a. The certificate holder is authorized to use an approved electronic/digital recordkeeping system, described and/or referenced in this paragraph (if none, enter N/A.) Camtronics Repair Station Manual Part 3 b. The certificate holder is authorized the use of the following electronic/digital signature procedures (if none, enter N/A ). Camtronics Repair Station Manual Part 3 c. The certificate holder is authorized to use electronic media for the repair station and quality control manuals, if acceptable (if none, enter N/A ). Camtronics Repair Station Manual Part 3 1. Issued by the. 2. These Operations Specifications are approved by direction of the Administrator. Digitally signed by Melvin L. Devore, Principal Maintenance Inspector (SW15) [1] EFFECTIVE DATE: 11/18/2016, [2] AMENDMENT #: 2 DATE: 2016.11.18 06:27:05-06:00 3. I hereby accept and receive the Operations Specifications in this paragraph. Campbell, David E., President Date 11/18/2016 Camtronics LLC A025-1 Amdt. No: 2 Certificate No.: D8XR913Y
Operations Specifications D100. Work to be Performed at a Place Other Than the Repair Station Fixed Location(s) HQ Control: 11/16/2004 HQ Revision: 050 a. The certificate holder may perform work at a place other than its Fixed Location (as listed in paragraph A001, and paragraph A101 if issued, of these operations specifications) provided it has the facilities, material, equipment and technical personnel to perform the work authorized in the following table. Work Authorized Work on a recurring basis Table 1 Repair Stations Manual References Part 1 of the Combined Repair Station and Quality Control Manual Quality Control Manual References Part 1 of the Combined Repair Station and Quality Control Manual b. The certificate holder may not perform continuous operation at a facility other than the station s Fixed Location listed in paragraph A001, and paragraph A101 if issued. c. Line Stations. Privileges of a line station, as set forth by the EASA certificate and scope of work and located within the country where the main facility is domiciled are listed in Table 1 are authorized. d. Work may be due to a special circumstance or on a recurring basis. If on a recurring basis, the repair station must have procedures in its manual. 1. Issued by the. 2. These Operations Specifications are approved by direction of the Administrator. Digitally signed by Melvin L. Devore, Principal Maintenance Inspector (SW15) [1] EFFECTIVE DATE: 11/18/2016, [2] AMENDMENT #: 8 DATE: 2016.11.18 06:29:08-06:00 3. I hereby accept and receive the Operations Specifications in this paragraph. Campbell, David E., President Date 11/18/2016 Camtronics LLC D100-1 Amdt. No: 8 Certificate No.: D8XR913Y
Operations Specifications 1. Issued by the. 2. Supp011 information reference: Repair Station I Quality Control Manual Revision H moved the referenced pages & Sections. 3. These Operations Specifications are approved by direction of the Administrator. 20 II.OS. I 0 13:47 : I 0 Central Daylight Locntion: \VcbOPSS Dil!ilally sil!ncd by Thomns D Doerner. Pri7Kipnl A\ 'ionics (S\\'15) 4. Date Approval is effecti ve: 08/ 10/2011 Amendment Number: 7 5. I hereby accept and receive the Operations Speci fieations in this paragraph. Campbell, David E, FAA Accountable Manager, 145 Date: 08/ 10/2011 Print Date: 8/1 0/201 1 D100-2 Camtronics LLC Certificate No.: D8XR913Y