Final Results of the project DEXA Motor Challenge Programme Dissemination, extension and application of the Motor Challenge Programme EIE/04/164/S07.38650 From 1st January 2005 to 30th June 2007 THE EUROPEAN MOTOR CHALLENGE PROGRAMME : An initiative supported by the European Commission
DEXA-MPC consortium STEM - Swedish Energy Agency Fraunhofer ISI dena SenterNovem LEI MOTIVA 15 partners from 11countries ADEME AERE Edgard Blaustein ISR University of Coimbra ADENE ENEA AEA - Austrian Energy Agency JSI - Jozef Stefan Institute - Energy Efficiency Centre CRES
DEXA The objectives of the project Main Objectives: Long term introduction and integration of the Motor Challenge Programme into national energy programmes Development of the Motor Challenge Programme around Europe Implementation and dissemination actions (in more than150 enterprise interventions) Complete MCP technical toolset: Refrigeration and Electrical distribution in the industry to be developped Create tools to support the MCP dissemination specific for SMEs (software and paper) THE EUROPEAN MOTOR CHALLENGE PROGRAMME : An initiative supported by the European Commission
Results achieved by the project DEXA-MPC 1 - Dissemination of the Motor Challenge and energy efficiency tools DEXA-MCP activities and results are summarized under the 3 following titles: 2 Extension of the Motor Challenge programme 3 Integration of the MCP at the national level for an efficient programme
1 - Dissemination of the Motor Challenge and energy efficiency tools 247 Audits and MCP presentations : 61 new Partners and 33 new Endorsers 10 case studies have been developed to be disseminated as Best practices. Contacts and promotion of the Motor Challenge programme through the organization of : 18 Workshops and 62 Interventions in seminars/conferences More than 960 Meetings, interviews and MCP presentations and 2690 Emailing and mailing information about MCP Organization of 39 Trainings sessions Participation at EEMODS 05 at Heidelberg, Germany: 200 attendees (3 papers from DEXA consortium). THE EUROPEAN MOTOR CHALLENGE PROGRAMME : An initiative supported by the European Commission
1 - Dissemination of the Motor Challenge and energy efficiency tools Construction of dissemination support tools: 12 Posters, 5 Brochures, 10 leaflets, 13 information Internet websites or part of websites dedicated to t the Motor Challenge Programme, 2 24 hours Hotline about MCP, 18 PowerPoint presentation and 4 small movies. Redaction or contribution of 76 articles on the Motor Challenge programme. THE EUROPEAN MOTOR CHALLENGE PROGRAMME : An initiative supported by the European Commission
1 - Dissemination of the Motor Challenge and energy efficiency tools: few examples Road show in Portugal Promotion leaflet Poster for exhibition
1 - Dissemination of the Motor Challenge and energy efficiency tools: few examples European Motor Challenge workshop 27 February 2007
2 Extension of the Motor Challenge programme 5 new MCP contact points in Eastern Europe countries through the collaboration built by DEXA-MCP with the 4EM-MCP MCP project. 4EM-MCP project website: www.mcpeurope.net/4em 4 new contact points ready to integrate the MCP European network: DEXA-MCP has established new contacts with Macedonia, Croatia, Cyprus, Malta, and Turkey and has tried to intensify the cooperation with Ireland and Great Britain. Good results have been received from : Croatia, Macedonia, Turkey and UK for their integration into the MCP European network. THE EUROPEAN MOTOR CHALLENGE PROGRAMME : An initiative supported by the European Commission
2 Extension of the Motor Challenge programme Integration of 2 new systems in the Motor Challenge and development ent of 2 new technical modules for these systems: Industrial refrigeration systems and Industrial electricity distribution systems used within industrial plants. Creation of 2 new MCP tools: 1 paper guide and 1 software tool These tools are more awareness than expert tools and the goal to achieve was to create a simple and easy to adapt base that could be used in all countries. THE EUROPEAN MOTOR CHALLENGE PROGRAMME : An initiative supported by the European Commission
2 Extension of the Motor Challenge programme : few examples DEXA - Complete the MCP technical range 2 new technical modules have been being developed: Industrial refrigeration 9% Electricity consumption (specifically in some industrial sectors such as food industry, plastic industry,...) in EU-15 in 1999 6 6 to 10 TWh saving potential The study of the industrial refrigeration systems extended to the EU-27 in 2002 have shown that the energy consumption is more than 100TWh/y (around 6% of the industrial electricity consumption). Industrial electricity distribution systems For instance: 5 TWh saving potential with industrial distribution transformers
2 Extension of the Motor Challenge programme : few examples The new technical guide : a tool designed for the SMEs
2 Extension of the Motor Challenge programme : few examples The new software : a tool designed for the SMEs
3 Integration of the MCP at the national level for an efficient programme Translation of the MCP toolset in the different languages: The translation of the already existing technical modules in national languages completed for the new countries being part of the DEXA- MCP consortium: Slovenia, Lithuania and Finland. Translation from the English of the 2 new modules in all the 10 different languages of the project : German, Slovenian, Lithuanian, Portuguese, uese, Swedish, Greek, Italian, Dutch, French and Finnish. Translation from the English of the 2 new tools (paper guide and software) in the different languages: Paper technical guide: French, Italian, Portuguese, Slovenian, Finnish, German. Software tool: French, Italian, German, Finnish, Greek, Lithuanian, an, Portuguese, Swedish, Slovenian THE EUROPEAN MOTOR CHALLENGE PROGRAMME : An initiative supported by the European Commission
3 Integration of the MCP at the national level for an efficient programme Long term introduction of MCP into national energy programme: 1. All EU countries have national Energy Efficiency programmes 2. MCP is flexible and developed regarding these national programmes 3. MCP is a supplementary, a complementary tool. It is common European banner that gives the opportunity to offer visibility to the potential savings in Motor Driven systems THE EUROPEAN MOTOR CHALLENGE PROGRAMME : An initiative supported by the European Commission
3 Integration of the MCP at the national level for an efficient programme : few examples France: NCP Information and training Guidelines Information, incentives, training AUDIT E E consumption Saving potential Steps to implement MCP action plan
3 Integration of the MCP at the national level for an efficient programme : few examples Sweden Integration with the voluntary energy efficiency program (PFE). Finland Audit results are reported to the Energy Agency. MCP Integration into the national Energy Efficiency Agreements simplified annual reporting using the national one: information on reported energy efficiency potentials and measures to Motiva who will give the summary information to the Commission
3 Integration of the MCP at the national level for an efficient programme : few examples The Netherlands Usergroup on MCP, started january 25, 2007 Since 2007: MCP-actionplan is on the list of Taxreduction National MCP Event, scheduled for October 2007
3 Integration of the MCP at the national level for an efficient programme : few examples Italy Training courses to Energy Managers, Brochure about White certificates Information and application on Fiscal deduction about high efficiency motors and VSD Case study on MCP applied to water pumps station Training, Application and Dissemination of MCP among SMEs Energy managers, White certificates & Fiscal deduction are connected to National Programme on Energy Efficiency
3 Integration of the MCP at the national level for an efficient programme : few examples Austria: Integration in the national climate:change programme: the first focus in the energy - efficient companies module will be on electric motor systems in companies workshops for consultants information material in addition to MCP technical guidelines
3 Integration of the MCP at the national level for an efficient programme : few examples Examples of Market Activities: MCP award ceremony, press-releases analysis of 10 energy audits (-12% saving potential) Best Practice Examples (4 MCP energy-audits) Follow up activities National Conference on electricity efficiency with motor supplyer training for compressed air consultant 7 top CAS saving measures with quick assessment procedure
DEXA-MPC conclusions and lessons learnt The 3 main conclusions of the DEXA-MCP project are the following ones: 1 Knowledge about cost effective energy efficiency measures in motor driven systems is still not very common in enterprises and their remains a strong need to further disseminate information with new tools and continuous efforts. The Motor Challenge programme has proved to be a good tool for a EU wide approach for efficiently helping to support the European Industries by developing common tools and supporting industrial efforts. The public support of the programme should therefore be constant in the time and avoid breaks due to periods without any public funding. THE EUROPEAN MOTOR CHALLENGE PROGRAMME : An initiative supported by the European Commission
DEXA-MPC conclusions and lessons learnt The 3 main conclusions of the DEXA-MCP project are the following ones: 2 Helping the enterprise to act and improve their energy efficiency is essential. The support of walk through audits and auditing programmes are one key to identify energy efficiency measures. Enterprises highly welcome the support of an expert to realize the audit and to follow the implementation of measures. Training of energy auditors in the field of motor driven systems is essential. Convincing the enterprises to use this expertise is facilitated by the public support and engagement of the EC and the national governments. The second key to help the enterprises to act is to train their internal staff and especially in the SMEs. THE EUROPEAN MOTOR CHALLENGE PROGRAMME : An initiative supported by the European Commission
DEXA-MPC conclusions and lessons learnt The 3 main conclusions of the DEXA-MCP project are the following ones: 3 - To further develop the outreach of the Motor Challenge Programme e in the EC two levels of actions are required: a real and permanent European Coordination and support by public funding is essential for the long term success of the program and its required impact on energy savings and emission reductions and a strong coordination at the national level is essential in order to integrate the programme within the national l context, organizations and policies. The national contact points of the program p are the key players for the further outreach and development of the Motor Challenge Programme. THE EUROPEAN MOTOR CHALLENGE PROGRAMME : An initiative supported by the European Commission
Thanks to all the participants of DEXA-MCP for their fruitful contribution to the success of the project CRES Sofronis Ilias and Karamani Fotini sofronis@cres.gr and fkaramani@cres.gr ENEA Vignati Sigfrido vignati@casaccia.enea.it AEA Kulterer, Konstantin Konstantin.kulterer@energyagency.at DENA Agricola, Annegret-Cl. and Bluem, Stefan Agricola@dena.de Fhg ISI Radgen, Peter peter.radgen@isi.fraunhofer.de SenterNOVEM Hartkamp Frank F.Hartkamp@senternovem.nl ADENE Oliveira, Fernando fernando.oliveira@adene.pt Thanks to the JRC and Paolo Bertoldi for its collaboration UC-ISR JSI LEI STEM MOTIVA AERE EB ADEME Almeida, Aníbal Evald Kranjcevic Skema Romualdas Widerström, Glenn Hille HYYTIA Dr. RIALHE Anne Blaustein, Edgar BUDIN, Jacques-Olivier and CHRETIEN, Bruno adealmeida@isr.uc.pt evald.kranjcevic@ijs.si skema@mail.lei.lt glenn.widerstrom@energimyndigheten.se hille.hyytia@motiva.fi a.rialhe@aere.fr Edgar.Blaustein@wanadoo.fr Jacques-olivier.budin@ademe.fr Thanks to: Europeump BCAS Eurovent ECI for their collaboration with the project Results of the project available at the websites: www.ademe.fr/dexa dexa-mcp www.motor-challenge.eu