GOVERNMENT OF INDIA MINISTRY OF DEFENCE ORDNANCE FACTORY BOARD ORDNANCE FACTORY RECRUITMENT CENTRE

GOVERNMENT OF INDIA MINISTRY OF DEFENCE ORDNANCE FACTORY BOARD ORDNANCE FACTORY RECRUITMENT CENTRE Online applications are invited from Indian citizens for engagement of 55 th Batch (for n- & candidates) of Trade Apprentices under the 'Apprentices Act 1961 in Ordnance & Ordnance Equipment Factories located in different States across India. The number of vacancies is approx.6948 including 3621 and 3327 n-, the highest ever as part of OFB s Skill India Mission. Important te: Candidates who have already applied through the Government Of India portal, www.apprenticeship.gov.in are necessarily required to re-apply to appear in written examination for this purpose and issue of Admit Card through our website link appearing in this advertisement. 1. On-line Registration of Application: Submission of On-line Application Starts from: 17/01/2017 Closing date of submission of On-line Application: 07/02/2017 2. AGE LIMIT: Between 14 to 22 years as on lase date of application, Relaxation in Upper age limit is permitted as under: Sl Category Years a) For SC/ST Candidates 05 (Five) years b) For OBC candidates 03 (Three) years c) For Physically Handicapped (PH) / Additional 10 (Ten) years Physically Challenged (PC) or Differently Abled Candidates d) For Candidates Upper age limit is further relaxed by the period of training already undergone as per the normal duration of NCVT/SCVT, in the relevant trade. 3. ESSENTIAL QUALIFICATION: a. For n- Category Passed Madhyamik (Class: 10th standard or equivalent) with minimum 40% marks in aggregate with 40% marks in each of mathematics & Science. b. For Category Should have passed /trade test from any institute recognized by NCVT (SCVT or any other authority specified through Gazette tification of Ministry of Labour & Employment / Ministry of Skill Development and Entrepreneurship, with duration as per the Apprentice Act, 1961) and should possess the qualification of the closing date of application. Page 1 of 16

4. VACANCY DETAILS: I. Vacancies are given in Annexure-I. The number of vacancies notified is provisional. II. Candidates can ONLY choose any one of the Ordnance Factories named in the annexure-i, where the applicant intends to appear in the competitive written Examination and to undergo the Trade Apprenticeship training. III. The candidates are advised to gather specific information about the factory, one intends to apply by visiting the link http://ofb.gov.in/index.php?wh=ourunits&lang=en. This will give an idea to the candidate about the location, products, facilities available with that Ordnance Factory / unit etc. IV. Vacancies in the trades for Ex- candidates available in respective factories are also mentioned in the table. However, vacancies in the trades for n- candidates will be allotted on the basis of merit position of the candidates, drawn through the written examination vis-a-vis vacancies in various trades available in the respective factory. 5. HOW TO APPLY: Candidate must apply 'online' ONLY directly through the website: http://www.ofb.gov.in/ While filling up the application form through website, the applicant must be ready with the following Scan copy of signature (10Kb - 20Kb), Clear passport size photo (15Kb - 40Kb) Scanned picture of Left Thumb Impression (10Kb-20Kb) - all in JPG/JPEG format. Candidates must also follow the detailed instructions, which is available on the website while filling up the application form. Candidates should keep a copy of the Application printout. Candidates are not required to send hard copy of application to the respective Factory/unit. However, the same will have to be produced by the candidates at the time of document verification in the respective Factory/unit. 6. SCHEME OF EXAMINATION: The written examination will be as follows: For n- Candidates: Written Test (One Paper of 03 hours duration, total questions 150) consisting of questions on English, General Knowledge, Mathematics and Aptitude/ Reasoning, as per Madhyamik ( Class: X th Standard or equivalent) For Candidates: Written Test (one paper consisting of 02 parts of 03 hours duration, total questions 150) PART - A: Questions on English, General Knowledge, Mathematics and Aptitude/Reasoning approx. 40% out of total number of questions. PART - B: Questions on the group of subject trades - approx. 60% out of total number of questions. Examination will be conducted on 'Multiple Choice Objective Type Test' on OMR sheet. There will be no negative marking. Page 2 of 16

7. MEDIUM OF EXAMINATION: 3 Languages formula: candidate can choose English or Hindi or language of the state in which ordnance factory chosen by the candidate is located (Bengali/ Marathi/ Oriya/ Tamil/ Telugu). 8. CENTRE OF EXAMINATION: Centre will be allotted w.r.t. location of the ordnance factory and medium of examination chosen by the candidate in one of the 12 centres viz. Bhubaneswar, Chennai, Coimbatore, Delhi, Hyderabad, Jabalpur Kolkata, Kanpur, Mumbai, Nagpur, Pune and Trichy. 9. NOTICES TO PROSPECTIVE CANDIDATES: The schedule for date of downloading the admit card and date of written examination will be notified on the website. In case of any change in schedule of dates, amendment etc. the same will be made available on the website. Changes in dates or in the recruitment process or any OTHER changes will be notified on the OFB link/ Dedicated Examination website to the prospective candidates. There will not be any separate advertisement in Print media in this regard. The candidates are advised to check Website regularly to take notice. tice to candidates who have successfully applied will be notified on the website itself after successful submission of application online on the website and/or will also receive intimation through SMS alert / e-mail. 10. MERIT LIST: Merit list for all candidates will be published on the website where the application form was submitted. In the event of tie in total marks obtained by the candidates, following criterion will be followed to decide position: For n- Candidates by age seniority. For Candidates i. Higher marks in Part-B ii. Age seniority. iii. If the tie still persists, it is finally resolved by referring to the alphabetical order of names i.e. a candidate whose name begins with the alphabet which comes first in the alphabetical order gets preference. 11. RESERVATION FOR SC/ST/OBC & PH (PC) CANDIDATES: As per the relevant schedule in the Rules under the Apprentice Act, 1961 and the Disability Act, 1995 and existing Government Rules. Final selection of the candidates will be made in order of merit in each category, separately. 12. DURATION OF TRAINING: For non- and candidates: Duration of Training period will be as specified in the Apprentice Act, 1961.However, for ex- candidates, training period will be reduced by the normal duration of Trade-wise training period, the candidate has undergone training at in the respective trade. 13. STIPEND: According to the Trade Apprentice Act 1961 & as per The Gazette notification of India, G.S.R. 680(A), Part-ll-Section 37-Sub-section(i) Dtd. September 22, 2014 year wise entitlement of Page 3 of 16

present stipend is appended below. (Time to time amendments via Gazette notification also will regulate the stipend). During the 1 st year of training 70% of minimum wages of Semi-Skilled workers notified by the respective state or Union Territory During the 2 nd year of training 80% of minimum wages of Semi-Skilled workers notified by the respective state or Union Territory During the 3 rd year of training 90% of minimum wages of Semi-Skilled workers notified by the respective state or Union Territory te: other allowances will be paid during the entire period of Apprenticeship training. However, in case of Ex- candidates, period of already undergone by them will be considered for the purpose of determining the stipend. 14. STANDARD OF PHYSICAL FITNESS: As per the Schedule-II of the Apprentices Act, 1961 and the disability Act, 1995. 15. MEDICAL EXAMINATION: Will be conducted by the respective Ordnance Factory (for the selected candidates only). Date, Time and Venue of Medical Examination will be communicated separately by the respective factory only. 16. TERMS & CONDONS: The selected candidates will have to execute a Contract (if minor, by his/her guardian). The Apprentices will not be provided with quarters/hostel accommodation by the Ordnance Factories. During the training, the Apprentices are entitled for FREE MEDICAL treatment from respective Ordnance Factory Hospital only. 17. OFFER & ACCEPTANCE OF EMPLOYMENT: It shall not be obligatory on the part of the Employer to offer any employment to any Apprentice after completion of the training, nor shall it be obligatory for the Apprentices to accept any employment, if offered by the Employer. The candidates are advised to get themselves familiarised with the rules and regulations under the Apprentices Act, 1961 and the disability Act, 1995. However, as per current executive order of MOD/OFB, extra 5 marks which is under litigation as on date may be given to Ex-trade Apprentices in the final merit list of the written examination conducted for a total of 100 marks for recruitment of Industrial Employees in Ordnance Factories, separately when vacancies are advertised after completion of Trade Apprenticeship from any of the Ordnance Factories. 18. Important Instruction for PH(VH) and PH(OH) candidates (a) One eyed candidates and partially blind candidates who are able to read the normal Question Paper set for all the candidates with or without magnifying glass and who wish to write/indicate the answer with the help of Magnifying Glass will be allowed to use the Magnifying Glass in the Examination Hall and will not be entitled to a Scribe. Such candidates will have to bring their own Magnifying Glass to the Examination Hall. (b) Visually handicapped (VH) candidates and candidates suffering from Cerebral Palsy can avail the assistance of a SCRIBE in the Written Examination subject to such requests being made in the application forms. Question Papers and Answer Sheets will not be provided in BRAILLE. Page 4 of 16

(c) Assistance for Scribe: The candidate should indicate the request for scribe while filling the application form. There is a separate application for scribe in which the candidate is required to be filled up his scribe details including ID. 19. GENERAL INFORMATION : Applicants are advised to note the following instructions carefully: I. Candidates will have to apply on-line only through the link appearing in this advertisement. II. Candidates are not required to pay any fee for the examination. III. It is to be noted that mere submission of application form, receipt of 'acknowledgement', receipt of admit card and appearance in examination does not guarantee induction as trade apprenticeship in any of the Ordnance Factories. The selection of candidates will be made based on factory-wise merit position considering available vacancies category-wise, scrutiny of original copy of credentials, clear police verification report & medical test etc. IV. The candidates are required to carefully go through the advertisement in detail. The candidates automatically agree to the terms and conditions of this advertisement by clicking the Apply Online Button in this Advertisement. V. Candidates are not required to send hard copy of application & admit card to the respective Factory/OFRC. However, the same will be kept with candidates only and have to produce by the candidates at the time of document verification. VI. Candidates are required to check up website for submitting online applications for any updates and changes. VII. Candidates are required to give valid mobile. and e-mail id for periodical notices. VIII. Written examination is Multiple Choice Question type and OMR answer sheets based. There will be NO negative marking. IX. Canvassing of any kind will disqualify the candidate. Selection process is done strictly on merit. Candidates are advised not to fall prey to any unscrupulous elements. X. Candidates will be permitted to enter examination hall with valid ADMIT CARD only, showing clear PHOTO, SIGNATURE & Left Thumb Impression. Hence the candidates are advised to ensure that their proper clear PHOTO, SIGNATURE & Left Thumb Impression have been uploaded and are printed on the Admit Card. XI. XII. XIII. XIV. XV. The candidate must not attempt impersonation or take help of any impersonator at any stage of the selection process or try to copy from neighboring candidates, books and use of any electronic gadgets. Any material suppression of facts or submitting forge certificates shall lead to rejection his/her candidature at any stage of selection of this process. If any candidate is found using any type of unfair means during the examination, the candidature of the candidate shall be debarred summarily and the candidate shall not be allowed to appear in any of the exams/written test conducted by Ordnance Factories at a future date. Decision of Ordnance Factories in all matters relating to the eligibility, acceptance/rejection of any application, allotment of language, examination centre etc. will be final and binding on the candidate and no inquiry/correspondence shall be entertained in this regard. Any subsequent changes in the terms and conditions of the engagement of Trade Apprentices as per the extant rules will stand good. Ordnance Factory Board reserves the right to incorporate any subsequent changes/modifications / additions in the terms & Page 5 of 16

XVI. XVII. XVIII. XIX. XX. XXI. XXII. XXIII. conditions under this advertisement notice as necessitated and applicable. Any corrigendum will be published on the OFB site (www.ofb.gov.in) or the site meant for applying online. Any dispute in regard to the engagement of Trade Apprentices will be subject to courts/tribunals having jurisdiction over the City/Town in which the concerned Ordnance Factory is situated and where the candidate has submitted his/her application. The candidates applying for the examination should ensure that they fulfil all the eligibility criteria for admission to the examination. Their admission at all the stages of examination will be purely provisional, subject to their satisfying the prescribed eligibility conditions. If, on verification of document, at any time before or after the written examination, it is found that the candidate does not fulfil any of the eligibility conditions, his/her candidature for the examination shall be cancelled by OFB or concerned Ordnance Factories / units. After the written examination is over, the question paper and answer keys will be uploaded on the website within 2 days. If any candidate wants to contest the uploaded answer keys, the candidate can do so within 07 days along with supporting documents ONLY after paying the prescribed fees of Rs 100/- for each question contested online. After the stipulated period is over, no contest shall be entertained. A third party expert panel will be constituted to examine the contests received and to finalise the revised answer key for evaluation. The decision of third party expert panel and the result based on the same will be final and binding. Record retention period for examination material (Original OMR Sheet/Attendance Sheet/Question paper etc.) will be 3 month after the declaration of result. After that no RTI shall be entertained by OFRC/any unit of Ordnance factories regarding this examination. The Competent Authority reserves the right to adopt any alternative lawful mode of selection in part or in whole, in case of contingency. The applicants are ONLY required to take a print-out of Admit Card to appear in the exam from the ONLINE portal. The candidates are NOT required to send any hard copy, anywhere, including that of his application filled up online, any documents or Admit Card. The applicants are required to ensure that the following details appear on the Admit Card print-out: A. Name and Roll. B. Clear photo for Identification purpose C. legible signature D. Clear Left Thumb Impression E. Complete address of the Centre 20. REJECTION OF CANDIDATURE: Candidates are requested to read all instructions carefully & thoroughly before applying. Their applications, otherwise, are likely to be rejected on one or more of the following reasons. The application or candidature of the candidate may be rejected for any of the following reasons: I. Incomplete Application II. Does not possess the prescribed qualification to undergo the trade apprenticeship in Ordnance factories on closing date of on-line application. III. Over aged or under aged or Date of Birth not filled or wrongly filled. Page 6 of 16

IV. Double or multiple applications submitted. V. Application without clear photo, clear photo with cap, wearing goggles, disfigured, unrecognizable or unclear or unidentifiable photo. VI. Candidate's name is figuring in the debarred list. VII. Any other irregularities which may render the candidature of applicant invalid by OFB. VIII. Only a single application will be entertained. Candidature in respect of multiple applications will be rejected outrightly, without any notice to such candidates. IX. Mismatch of Name, Father's name and Date of Birth in Online application form with the 10th certificate/ certificate. Page 7 of 16

1 Chandigarh Ordnance Cable Factory CHANDIGARH 2 Madhya Pradesh 3 Madhya Pradesh 4 Madhya Pradesh 5 Madhya Pradesh Annexure-I n Carpenter 4 0 4 Electrician 5 0 5 Fitter 8 0 8 Machinist 8 10 18 Painter (General) 3 0 3 Turner 6 0 6 Welder (G&E) 5 0 5 TOTAL 39 10 49 Gun Carriage Factory JABALPUR Electrician 15 0 15 Electroplater 6 0 6 Fitter 0 81 81 Machinist 0 116 116 0 10 10 Painter (General) 6 0 6 Turner 0 34 34 Welder (G&E) 35 0 35 TOTAL 62 241 303 Grey Iron Foundry JABALPUR - Electrician 11 8 19 Foundry Man 0 14 14 Machinist 9 7 16 0 10 10 Ordnance Factory IT A RSI Ordnance Factory KHAMARIA JABALPUR Turner 6 4 10 Welder (G&E) 12 8 20 TOTAL 38 51 89 Attendant Operator Chemical 0 25 25 Boiler Attendant 0 3 3 Carpenter 10 0 10 Electrician 5 0 5 Fitter 15 0 15 Machinist 3 0 3 Painter (General) 5 0 5 Turner 3 0 3 Welder (G&E) 4 0 4 TOTAL 45 28 73 Attendant Operator Chemical 0 30 30 Boiler Attendant 0 9 9 Electrician 15 10 25 Electroplater 10 5 15 Page 8 of 16

6 Madhya Pradesh n Fitter 20 20 40 Machinist 20 20 40 Turner 20 20 40 Welder (G&E) 20 0 20 TOTAL 105 114 219 Ordnance Factory KATNI Electrician 15 0 15 Fitter 0 15 15 Foundry Man 0 11 11 Instrument Mechanic 0 3 3 Machinist 0 17 17 0 15 15 Refrigeration & AC Mechanic 0 2 2 Tool & Die Maker (Tool Jig & Fixture) 8 0 8 7 Madhya Pradesh Turner 0 12 12 Welder (G&E) 2 0 2 TOTAL 25 75 100 Vehicle Factory JABALPUR Electrician 15 0 15 Fitter 55 0 55 Machinist 80 0 80 0 12 12 8 Maharashtra Ammunition Factory Kirkee (PUNE) Painter (General) 5 0 5 Tool & Die Maker (Tool Jig & 5 0 5 Fixture) Turner 25 0 25 Welder (G&E) 15 0 15 TOTAL 200 12 212 Attendant Operator Chemical 0 96 96 Electrician 38 0 38 Fitter 91 40 131 Machinist 125 0 125 Mechanical maintenance Chemical plant 0 48 48 Refrigeration & AC Mechanic 0 16 16 Tool & Die Maker (Tool Jig & Fixture) 20 20 40 Page 9 of 16

n Turner 67 0 67 9 Maharashtra High Explosives Factory, Kirkee (PUNE) 10 Maharashtra Machine Tool Prototype Factory, AMBARN ATH 11 Maharashtra Ordnance Factory AMBARNATH 12 Maharashtra Ordnance Factory AMBAJHARI, NAGPUR TOTAL 341 220 561 Attendant Operator Chemical 0 49 49 Fitter 12 0 12 Electrician 12 0 12 TOTAL 24 49 73 Electrician 5 0 5 Fitter 4 5 9 Machinist 6 6 12 0 5 5 Turner 8 7 15 Welder (G&E) 2 0 2 TOTAL 25 23 48 Electrician 4 4 8 Fitter 9 9 18 Foundry Man 0 10 10 Machinist 89 89 178 0 8 8 Turner 3 3 6 Welder (G&E) 2 0 2 TOTAL 107 123 230 Electrician 45 0 45 Fitter 50 0 50 Machinist 200 45 245 0 38 38 Turner 50 0 50 Welder (G&E) 35 0 35 TOTAL 380 83 463 13 Maharashtra Ordnance Factory BHANDARA Attendant Operator Chemical 0 116 116 Boiler Attendant 15 10 25 Carpenter 3 0 3 Electrician 6 0 6 Fitter 23 0 23 Instrument Mechanic 0 8 8 Machinist 2 0 2 Mason 2 0 2 Pipe Fitter 0 2 2 Page 10 of 16

Plumber 0 9 9 Sheet Metal Worker 2 0 2 Turner 4 0 4 Welder (G&E) 2 0 2 TOTAL 59 145 204 14 Maharashtra Ordnance Factory BHUSAWAL Fitter 5 6 11 Machinist 6 12 18 Painter (General) 3 0 3 Sheet Metal Worker 4 0 4 Turner 0 2 2 Welder (G&E) 5 0 5 TOTAL 23 20 43 15 Maharashtra Attendant Operator Chemical 0 179 179 Ordnance Factory CHANDA 16 Maharashtra Ordnance Factory Dehu Road, Pune n Boiler Attendant 2 0 2 Carpenter 10 0 10 Electrician 12 0 12 Fitter 17 0 17 Machinist 12 0 12 Mason 10 0 10 Painter (General) 10 0 10 Turner 7 0 7 Welder (G&E) 10 0 10 TOTAL 90 179 269 Attendant Operator Chemical 0 48 48 Electrician 12 0 12 Fitter 20 0 20 Machinist 10 0 10 Plumber 0 6 6 Refrigeration & AC Mechanic 0 8 8 17 Maharashtra Ordnance Factory VARANGOAN Turner 10 0 10 Welder (G&E) 6 0 6 TOTAL 58 62 120 Attendant Operator Chemical 0 53 53 Electrician 5 0 5 Fitter 15 14 29 Machinist 29 28 57 0 14 14 Turner 9 8 17 TOTAL 58 117 175 Page 11 of 16

18 Orissa Ordnance Factory Badmal Attendant Operator Chemical n 0 92 92 Boiler Attendant 4 0 4 Electrician 9 0 9 Fitter 18 0 18 TOTAL 31 92 123 19 Tamilnadu Cordite Factory Aruvankadu Attendant Operator Chemical 0 20 20 Boiler Attendant 0 4 4 Carpenter 5 0 5 Electrician 6 0 6 Fitter 20 0 20 Instrument Mechanic 0 4 4 Machinist 2 0 2 Plumber 0 2 2 Tailor 2 0 2 Turner 8 0 8 Welder (G&E) 5 0 5 TOTAL 48 30 78 20 Tamilnadu Engine Factory AVADI Electrician 18 0 18 Fitter 65 22 87 Machinist 9 0 9 0 5 0 Turner 9 0 9 TOTAL 101 27 128 21 Tamilnadu Heavy Alloy Penetrator Project TTRUCH1RAPALLI Electrician 12 0 12 Fitter 20 0 20 Machinist 25 0 25 Refrigeration & AC Mechanic 0 2 2 Turner 15 0 15 Welder (G&E) 3 0 3 TOTAL 75 2 77 22 Tamilnadu Heavy Vehicles Factory AVADI Carpenter 5 0 5 Electrician 55 0 55 Fitter 121 32 153 Machinist 45 36 81 Painter (General) 5 0 5 Welder (G&E) 45 24 69 Page 12 of 16

23 Tamilnadu Ordnance Clothing Factory AVADI n TOTAL 276 92 368 Tailor 61 185 246 TOTAL 61 185 246 24 Tamilnadu Ordnance Factory Tiruchirapally Electrician 10 0 10 Fitter 42 0 42 Machinist 62 20 82 0 5 5 Refrigeration & AC Mechanic 0 2 2 25 Telangana Ordnance Factory Project Medak (Yeddumailaram ) Turner 15 0 15 Welder (G&E) 5 0 5 TOTAL 134 27 161 Electrician 25 0 25 Fitter 73 50 123 Foundry Man 0 10 10 Moulder 18 0 18 Machinist 30 20 50 Painter (General) 3 0 3 Turner 10 0 10 Welder (G&E) 37 30 67 TOTAL 196 110 306 26 Uttar Pradesh Field Gun Factory KANPUR Electrician 3 5 8 Fitter 7 10 17 Forger & Heat Treater 0 12 12 Machinist 9 14 23 0 8 8 27 Uttar Pradesh Ordnance Clothing Factory SHAHJAHANPUR Turner 3 5 8 TOTAL 22 54 76 Tailor 154 154 308 TOTAL 154 154 308 28 Uttar Pradesh Ordnance Equipment Factory KANPUR- Carpenter 3 0 3 Electrician 5 0 5 Fitter 10 0 10 Footwear Maker 0 20 20 Page 13 of 16

29 Uttar Pradesh Ordnance Equipment Factory HAZARATPUR n Machinist 2 0 2 Tailor 51 51 102 Welder (G&E) 3 0 3 TOTAL 74 71 145 Electrician 3 0 3 Machinist 3 0 3 Tailor 42 42 84 TOTAL 48 42 90 30 Uttar Pradesh Ordnance Factory KAN PUR Electrician 4 0 4 Fitter 38 41 79 Machinist 40 67 107 0 17 17 31 Uttar Pradesh Ordnance Factory MURADNAGAR Turner 33 0 33 Welder (G&E) 7 0 7 TOTAL 122 125 247 Electrician 24 0 24 Fitter 46 0 46 Foundry Man 0 36 36 Instrument Mechanic 0 4 4 Maintenance 0 6 6 Machinist 34 0 34 Pattern Maker 0 4 4 Steel Melting Hand 0 6 6 Turner 34 0 34 Welder (G&E) 26 0 26 TOTAL 164 56 220 32 Uttar Pradesh Ordnance Parachute Factory KANPUR Electrician 5 0 5 Fitter 15 0 15 Tailor 120 60 180 TOTAL 140 60 200 33 Uttar Pradesh Small Arms Factory KANPUR Electrician 11 0 11 Electroplater 10 0 10 Forger & Heat Treater 0 10 10 Page 14 of 16

n Machinist 4 0 4 0 8 8 Refrigeration & AC Mechanic 0 4 4 Welder (G&E) 4 0 4 TOTAL 29 22 51 34 Uttarakhand Ordnance Factory DEHRADUN Electrician 3 0 3 35 Uttarakhand Opto Electronic Factory DEHRA DUN Fitter 34 0 34 Machinist 15 0 15 Optical Worker 0 47 47 Turner 7 0 7 TOTAL 59 47 106 Electrician 9 0 9 Electroplater 11 0 11 Fitter 3 12 15 Machinist 6 8 14 Optical Worker 0 56 56 TOTAL 29 76 105 36 West Bengal Gun & Shell Factory, COSSIPORE Electrician 6 14 20 Electroplater 5 0 5 Fitter 11 32 43 Machinist 27 145 172 0 6 6 Turner 5 11 16 Welder (G&E) 8 0 8 TOTAL 62 208 270 37 West Bengal Metal & Steel Factory ISHAPORE Electrician 20 0 20 Electroplater 8 0 8 Fitter 54 0 54 Forger & Heat Treater 0 10 10 Machinist 55 0 55 0 20 20 Turner 20 0 20 Welder (G&E) 8 0 8 TOTAL 165 30 195 38 West Bengal Ordnance Factory DUM DUM Electrician 3 0 3 Fitter 8 11 19 Page 15 of 16

n Machinist 8 10 18 0 1 1 Turner 5 3 8 Welder (G&E) 12 0 12 TOTAL 36 25 61 39 West Bengal Rifle Factory Ishapore Electrician 20 0 20 Fitter 0 100 100 Machinist 0 100 100 0 10 10 Turner 0 16 16 Welder (G&E) 10 0 10 TOTAL 30 226 256 Page 16 of 16