GIDEP PSMC Presentation

Similar documents
Department of Defense INSTRUCTION

to improve their business systems and be better prepared for DOD review and approval as will likely be required per NDAA 2012 Section 818(e).

Air Force Lifecycle Management Center (AFLCMC)

PARTICIPATION IN THE GOVERNMENT-INDUSTRY DATA EXCHANGE PROGRAM (GIDEP)

Implementing Policy Guidance

DOE Nuclear Regulatory Framework and Comparisons of Nuclear & Aerospace Quality Requirements

DEFENSE LOGISTICS AGENCY AMERICA S COMBAT LOGISTICS SUPPORT AGENCY


Counterfeit Avoidance: SAE International Standards- Current and under Development Autumn 2012

New DoD Protections Against Counterfeit Parts: Is Your Company Ready?

2016 Major Automated Information System Annual Report

Lockheed Martin Missiles and Fire Control. ECIA Regional Event. November 9, Teresa Wardingley Director SEMAC

The Beginning. GEN Kern s Memo, 20 Aug 02 Creating Lean A Mgmt Tool for the Future. there is potential for great progress.

Hazardous Materials Information Resource System

Defense Federal Acquisition Regulation Supplement: Amendments. Related to Sources of Electronic Parts (DFARS Case 2016-D013)

DOD Anti-Counterfeit Rule Requires Immediate Action --By Craig Holman, Evelina Norwinski and Dana Peterson, Arnold & Porter LLP

Defense Logistics: Plan to Improve Management of Defective Aviation Parts Should Be Enhanced

Defense Logistics Agency Can Improve Its Product Quality Deficiency Report Processing

Department of Defense INSTRUCTION. Protection of Mission Critical Functions to Achieve Trusted Systems and Networks (TSN)

Ammunition Peculiar Equipment

SECNAVINST B ASN (RDA) 22 Dec 2005 PRODUCT DATA REPORTING AND EVALUATION PROGRAM (PDREP)

(Billing Code ) Defense Federal Acquisition Regulation Supplement: Costs. Related to Counterfeit Electronic Parts (DFARS Case 2016-D010)

Army Industrial Base Process

DMSMS 2010 Achievement Awards

Department of Defense DIRECTIVE

DATA ITEM DESCRIPTION

Government-Industry Data Exchange Program

ARMY

DEFENSE LOGISTICS AGENCY THE NATION S COMBAT LOGISTICS SUPPORT AGENCY

Theatre High Altitude Area Defense Missile Systems (THAAD) Parts Standardization and Management Committee Conference.

Support. Introduction

Army Industrial Base Process

Reporting of Product Quality Deficiencies Within the U.S. Army

COMPLIANCE WITH THIS PUBLICATION IS MANDATORY

State of the Defense Standardization Program. An Overview of the DSP

Subcontract Reporting Subcontracting Data Process Highlighted Issues Incorrectly Submitted Reports Status of DoD FY 2012 Reports Resources DoD

DISPOSITION OF EXCESS AND UNDERUTILIZED GOVERNMENT PROPERTY IN THE POSSESSION OF DEFENSE CONTRACTORS

MCO C465 AUG MARINE CORPS ORDER From: Commandant of the Marine Corps To: Distribution List

DEFENSE LOGISTICS AGENCY THE NATION S COMBAT LOGISTICS SUPPORT AGENCY

Tactical Wheeled Vehicle Sustainment

Department of Defense INSTRUCTION

Defense Logistics Agency INSTRUCTION VETERINARY MEDICAL AND INSPECTION OF SUBSISTENCE SUPPLIES AND SERVICES

COMPLIANCE WITH THIS PUBLICATION IS MANDATORY

Department of Defense (DoD) Trusted Microelectronics

Advanced Planning Briefing to Industry 5-7 April Operational Forces Systems Product Group 09 Overview. Lindo Bradley, Product Group Director

Title: F/A-18 - EA-18 AIRCRAFT / SYSTEM PROGRAM PROTECTION IMPLEMENTATION PLAN. Number: DI-MGMT-81826C Approval Date:

Army Needs to Improve Contract Oversight for the Logistics Civil Augmentation Program s Task Orders

Department of Defense INSTRUCTION. SUBJECT: Physical Security Equipment (PSE) Research, Development, Test, and Evaluation (RDT&E)

COMPLIANCE WITH THIS PUBLICATION IS MANDATORY THIS DOCUMENT IS AVAILABLE AT THE FOLLOWING URL:

Defense Acquisition Guidebook Systems Engineering Chapter Update

Headquarters U.S. Air Force

UNCLASSIFIED R-1 ITEM NOMENCLATURE

UNCLASSIFIED FY 2016 OCO. FY 2016 Base

Report No. D July 14, Additional Actions Can Further Improve the DoD Suspension and Debarment Process

Number: DI-MGMT Approval Date:

COMPLIANCE WITH THIS PUBLICATION IS MANDATORY

Department of Defense DIRECTIVE

Department of Defense INSTRUCTION

Army Participation in the Defense Logistics Agency Weapon System Support Program

Department of Defense DIRECTIVE

Army Small Business Programs. Tommy L. Marks Director, Office of Small Business Programs Office of the Secretary of The Army

Administrative Change to AFPD 51-11, Coordination of Remedies for Fraud and Corruption Related to Air Force Procurement Matters OPR: SAF/GC Reference

Department of Defense INSTRUCTION

CHANGE MIL-HDBK-454 NOTICE 1 28 May 1997 DEPARTMENT OF DEFENSE HANDBOOK GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT

COMPLIANCE WITH THIS PUBLICATION IS MANDATORY

DODIG March 9, Defense Contract Management Agency's Investigation and Control of Nonconforming Materials

Department of Defense DIRECTIVE

Quality Assurance Assessment of the F-35 Lightning II Program

Policy Updates: Army Regulation Module 2: Policy Updates

DEPARTMENT OF DEFENSE Defense Contract Management Agency INSTRUCTION. Corrective Action Process

Performance-Based Logistics

Replacement Components and Sources. Active & Historical Standards

AMRDEC UPDATE. Date: February 7, Dr. Juanita M. Harris, SES. IAW DoD Directive , insert appropriate distribution statement

INSTRUCTION. Department of Defense. NUMBER April 7, 2011 Incorporating Change 1, September 14, 2017 USD(AT&L)

Department of Defense INSTRUCTION

IDENTIFYING, RECORDING AND REPORTING ADVERSE EVENTS FOR CLINICAL INVESTIGATIONS OF MEDICAL DEVICES

Picatinny BRAC 05 Information Briefing for ICAP

UNCLASSIFIED. FY 2016 Base FY 2016 OCO

Diminishing Manufacturing Sources and Material Shortages Research and Support ( & )

terns Planning and E ik DeBolt ~nts Softwar~ RS) DMSMS Plan Buildt! August 2011 SYSPARS

DEPARTMENT OF THE ARMY U.S. ARMY HUMAN RESOURCES COMMAND 1600 SPEARHEAD DIVISION AVENUE, DEPARTMENT 480 FORT KNOX, KY

System of Records Notice (SORN) Checklist

Joint IETM INTEROPERABILITY

PROCURE-TO-PAY. Government Furnished Property Update Navy, Army, and Air Force TRAINING SYMPOSIUM Procure-to-Pay Training Symposium

Defense Logistics Agency

Title:F/A-18 - EA-18 Aircraft / System Program Protection Implementation Plan

INTERNET DOCUMENT INFORMATION FORM

Department of Defense INSTRUCTION

Number: DI-MGMT Approval Date:

Pilot Project Program Under the Drug Supply Chain Security Act; Request for Comments

Subj INSTALLATION GEOSPATIAL INFORMATION AND SERVICES

DOD INSTRUCTION DEPOT SOURCE OF REPAIR (DSOR) DETERMINATION PROCESS

Subj: CORROSION PREVENTION AND CONTROL (CPAC) PROGRAM

DEPARTMENT OF DEFENSE Defense Contract Management Agency INSTRUCTION. National Aeronautics and Space Administration (NASA) Support

2017 CQSDI Brief Mike Wadzinski Director Quality, Safety and Mission Assurance March 13, 2017

The Critical Link Workshop

U.S. Government Contract FAR and DFARs Clauses Incorporated by Reference

COMPLIANCE WITH THIS PUBLICATION IS MANDATORY

DOD MANUAL , VOLUME 1 DOD MANAGEMENT OF ENERGY COMMODITIES: OVERVIEW

Distribution Statement A: Approved for public release; distribution is unlimited. PCN

Transcription:

1 GIDEP PSMC Presentation Reporting Requirements AS6171 & AS6081 Update GIDEP Modernization Update Suspect Counterfeit Nonconforming DMSMS Product Change Notices (PCN) AMC Counterfeit Parts & Material Prevention Best Practices IPT Status

2 Department of Defense Instruction 4140.67 April 26, 2013 Subject: DoD Counterfeit Prevention Policy 1. PURPOSE In accordance with the authority in DoD Directive (DoDD) 5134.01 (Reference (a)), this instruction: a. Establishes a policy and assigns responsibilities necessary to Prevent the introduction of counterfeit materiel at any level of the DoD supply chain 3. POLICY Document all occurrences of suspect and confirmed counterfeit materiel in the appropriate reporting systems including the Government-Industry Exchange Program (GIDEP)

3 DoDI 4140.67, April 26, 2013 ENCLOSURE 2 RESPONSIBILITIES 8. DoD COMPONENT HEADS. DoD Component heads: b. Implement DoD anti-counterfeiting policies, procedures, practices and contract requirements for prevention, detection, disposition, remediation, investigation, reporting and restitution remedies. j. Report all occurrences of suspect confirmed counterfeit materiel: (1) To appropriate authorities, deficiency reporting systems, and GIDEP within 60 calendar days.

4 Section 818 (e) Improvement of Contractor Systems for Detection of Counterfeit Electronic Parts 252.246-7007 - Contractor Counterfeit Electronic Part Detection and Avoidance System (AUG 2016) - Requires reporting of counterfeit and suspect counterfeit parts to GIDEP 252.246-7008 Sources of Electronic Parts (OCT 2016)

5 Reporting of Nonconforming Product FAR Case 2013 002, Expanded Reporting of Nonconforming Items, expands beyond the requirements of section 818(c)(4), applying Government wide (not just DoD) to certain parts with a major or critical nonconformance (not just counterfeit electronic parts) (proposed rule published June 10, 2014).

6 AS6171 Test Method Standards, General Requirements Suspect Counterfeit EEE Parts AS6171: Main Document and Slash Sheets 1 11 recently approved by the SAE Council and published. AS6081 - Fraudulent/Counterfeit Electronic Parts: Avoidance, Detection, Mitigation, and Disposition Distributors Counterfeit Electronic Parts; Avoidance Protocol, Distributors The AS6081 will call out the AS6171 Test Methods associated with the AS6171. There will be a Test Model associated with the DLA Requirements. Anticipating a publish date of Fall 2017.

7 GIDEP MODERNIZATION DASHBOARDS User Profile BATCH MATCH Wildcards AS6171 Defect Codes* * The defect code, name, and definition are from AS6171 and are used by permission of SAE International. See SAE AS6171 for further information on the test method cited. Copies of AS6171 may be obtained at www.sae.org.

8

9

10 SUSPECT COUNTERFEIT DATA

11 GIDEP Suspect Counterfeit Reports FY2012 - August 2016 120 117 100 78 80 60 51 45 40 40 20 0 FY2012 FY2013 FY2014 FY2015 FY2016

12

13

14

15

16

17 GIDEP FY2016 Nonconforming Data

18 Data Based on 105 Nonconforming GIDEP Reports October 2015 - September 2016 (Does Not Include AAN) ENVIRONMENTAL 9.5% 10 OTHER 24.8% 26 DOCUMENTATION PART MATERIAL PART MARKING PKG MATERIAL PKG MARKING 3.8% 21.0% 0.0% 0 0.0% 0 0.0% 0 4 22 MECHANICAL 8.6% 9 ELECTRICAL DIMENSIONAL 22.9% 13.3% 14 24 VISUAL 18.1% 19 0 5 10 15 20 25 30

19 Product Information Data (PID)

Diminishing Manufacturing Sources and Material Shortages (DMSMS) and Product Change Notices (PCNs) 20

21 Diminishing Manufacturing Sources and Material Shortages (DMSMS)

22 Data Mined Vs. Users Submitted Number of Documents Submitted - FY 2010 - Aug 2016 1600 1400 1200 1000 1045 800 856 1319 1011 1138 1174 1234 600 400 200 362 466 209 207 174 200 161 0 2010 2011 2012 2013 2014 2015 2016 Submitted By Users MINED

23 Data Sources Mostly from the Web (84% in 2015, 87% in 2016) Direct submittals from GIDEP Members DLA Land & Maritime Raytheon Texas Instruments Vishay Aeroflex Harris Intersil Direct submittals from non-gidep Members Maxim

24 DMSMS Commodities SWITCHES, 124 DIODES, 77 CAPACITORS, 118 COMMUNICATIONS, 146 CONNECTORS, 548 ELECTRONIC MODULES, 159 NETWORKS, 218 MICROCIRCUITS, 493 SOFTWARE, 344 ELECTRONIC COMPONENTS, 371 COMPUTERS, 400

25

26 Product Change Notices

27

28 AMC Counterfeit Parts & Material Prevention Best Practices IPT Status Chair Eric Hoover, US Army, Rock Island Arsenal, IL IPT various members from across the DoD, US Army, DLA, Tobyhanna, NAVAIR, DCMA, PEO SOLDIER, GIDEP, etc IPT approach changing, Focus Groups to SMEs Common definitions for Counterfeit were compiled & handed out Looking for various process SMEs for feedback Capturing counterfeit SOPs and process maps (PDREP, etc) Reviewing SAE Standards, Counterfeit notification processes Identifying available Counterfeit Prevention Training available and reviewing