Medical furniture OPTIMA OBSTETRIC BED
OUR APPROACH The medical nursing and home care sectors require very specialist funiture that improves the patients quality of life, while making the carers job easier. By specialising in medical furniture manufacturing we have been able to grow our range of health care products, by designing them to provide an integral solution to the specific needs of clinics, hospitals, nursing homes or home patients. MEDISA expertise brings you high technology products with high quality materials that provide the patient with the right environment to recover and for carers to care.
INDEX CONTENTS OPTIMA Obstetric Bed 04 In detail 06 Features 08 Specifications 10
OPTIMA OBSTETRIC BED With multiple functions for maximising comfort and individual care
0 5. O P T I M A O B S T E T R I C B E D
OPTIMA OBSTETRIC BED With multiple functions for maximising comfort and individual care IN DETAIL
07. OPTIMA IN DETAIL Children are the anchors that hold a mother to life Sofocles 01.Extending and retractable leg-section support SATELLITE CONTROL Control panel with clear pictrograms and symbols for patient and nursing staff. GO safety pushbutton for user s security.when pushed, the bed controls turn on and remain active for up to 30 seconds after selecting one of the options. This prevents accidental movements of the bed and any subsequent injury, as well as non-desired use by inexpert persons. NuRSE CONTROL PANEL Panel for exclusive use of medical staff. It pemits optional enablement and disablement of such functions as therapeutical positions, which are beyond patient s reach. The nurse control panel includes a system with pre-programmed functions. In case of emergency, just pressing the desires button, the bed moves to the desires position as trendelemburg, CRP, Cardiac chair, Medical enanimation position. STOP pushbutton: it blocks all the bed movements to prevent injuries. 5 independent pushbuttons: Each permits adjusting a different position of the bed at the touch of it.
OPTIMA OBSTETRIC BED With multiple functions for maximising comfort and individual care FEATuRES Designed for gynaecology and maternity patients at any stage of pregnancy, childbirth and postpartum, this bed makes it unnecessary to change the woman in labour to another bed at any time. 01 BED BASE Epoxy-coated steel tube frame. Headboard and footboard easy to assemble without tools. Scissor-lift raising system for greater stability and loads of up to 230kg. 03 MANOEuVRABILITY Handset designed to allow easy and quick positioning of the bed sections. (Optional control from handset fitted into a siderail). Pedal (optional) for height adjustment of bed, with blocking and releasing system. 01. rectoscopic examination position 02. semi-fowler position
09. OPTIMA FEATuRES 02 COMFORT Independent and removable ABS sections. Bed base raising and profiling by means of low-voltage electric motors compliant with EN 60601-1. Electrically-operated height adjustment from 640mm to1000mm. Trendelenbur g to 16º. Electrically-powered reverse Trendelenburg to 5º. Electric operation of pelvis support to 30º. 04 SAFETY 150mm diameter castors with central braking and power steering facility. Bottom thermoplastic panelling protects the bed mechanism and facilitates cleaning. Height adjustment actuators fall-preventer, in case of failure. Anti-trapping system that automatically stops the motor on detecting an obstacle. Emergency release of backrest for quick lowering of the section in the event of an emergency, battery or power failure. 03. tredenlenburg position 04. squatting position, with rail
OPTIMA OBSTETRIC BED SPECIFICATIONS SIDE PROTECTION The two independent ABS side rails serve as supports to help patient sit up in bed easily. Moreover, they provide protection to much of the lying surface in the most delicate positions. SECTIONS MAINTENANCE MADE EASY Made from ABS, the three sections are easy to clean and disinfect. The properties of ABS to ambient conditions have been laboraty tested. Easy access to the bed base from above means less effort is required for bed maintenance. MOBILITY trendelengurg +17º EASE OF BED ADJuSTMENT Pre-programmed buttons on the control panel make operation very easy. AuTOMATIC CHAIR POSITION A pre-programmed automatic chair positioning control permits patient to sit comfortably in bed to watch TV, to read, to eat or to speak to someone face to face. overall dimension 2120mm x 1030mm AuTOMATIC FuNCTIONS Provide adequate support to patients suffering from circulatory diseases and prevent the risk of decubitus (30º semi-fowler position). REPROFILING FuNCTION When lowering the bed from the chair or semi-fowler position, all the sections of the lying surface also descend to the low position automatically. inclination of trunk section 70º ACCESSORIES EQUIPAMIENTO STANDARD Set of mattresses Set of leg troughs Set of grips Squatting position rail Tray OPTIONAL Handset fitted into side rails MB-AVANT-01 Accessories trolley MB-AVANT-02 Stirrups MB-AVANT-03 IV drip pole MB-AVANT-04 Satellite Control Panel MB-AVANT-05 Foot control (pedal) MB-AVANT-06 TECHNICAL ESPECIfICACIONES DATA TéCNICAS ELECTRICAL SPECIfCATIONS TOTAL LENGTH 2120 mm POWER SUPPLY 230V 50 hz AS-CHAIR LENGTH 1645 mm MAXIMUM CURRENT INTAKE 1.6A, 370 Volt WIDTH INCL. SIDE RAILS 1030 mm LIQUID INGRESS PROTECTION IP 66 BED BASE WIDTH 890mm HEIGHT RANGE (TO LYING SURfACE) min 640 mm. max 1000mm. BACKREST ANGLE 70º SEAT SECTION ANGLE 17º TRENDELENBURG POSITION 16º REVERSE TRENDELENBURG POSITION 5º PROTECTION CLASS ELECTRICAL SHOCK PROTECTION Class I Type B SAfE WORKING LOAD 230 kg
11.OPTIMA SPECIfICATIOnS colour SaMPleS turquoise green cream yellow egg yolk orange pearl grey sky blue certificates and regulations IBV All MEDISA products comply with Directive 93/42/EEC concerning medical devices (Annex VII). Similarly, MEDISA has all its production assessed and certified for compliance with the iso 9001:2000 standard requirements. CE The MEDISA products are subject to the following standards: en 60601-2-38 en 60601-1-1-2 en 60601-1-2 en 60601-1-4 en 60601-1 SGS certificate nº es06/2126 Has been assessed and certified to comply with the ISO 9001:2000 requirements for the following activities: design, manufacture, marketing and maintenance of medical beds and chairs. Marketing of hospital furniture. OPtiMuM StaBilitY and capacity 200 kg 230 kg The MEDISA bed base raising system features optimum stability and load resistance. It can support weights of up to 200-230 kg depending on the selected. Medical ibérica S WeBSite www.medical-iberica.com
lanzahita, 6 Pol. ind. albarreja 28946 fuenlabrada, Madrid (Spain) t. 91 208 94 00 f. 91 208 94 01 www.medical-iberica.com national Book catalogue number: M-13308-2009