Assoc. Prof. Dr. SOLEHUDDIN BIN SHUIB

Page1 Currrriculum Vitae: Assoc.Prof. Dr. Solehuddin bin Shuib Assoc. Prof. Dr. SOLEHUDDIN BIN SHUIB Attached To: Faculty of Mechanical Engineering Universiti Teknologi MARA 40450 Shah Alam, Selangor, MALAYSIA Main Designations: 1. Associate Professor/Lecturer DM 53 2. Head of Center for Graduate Studies 3. Associate member Institute of Science(IOS) 4. Associate Fellow (ASM Associate) - Academy of Sciences Malaysia 5. Associate Member Majlis Profesor Negara Contact Details: Email: solehuddin2445@salam.uitm.edu.my; mesoleh@gmail.com Tel: +6 03-55435191 (Off.); +6 019 551 1600 (HP) Fax: +6 03-55435160 FIELD OF SPECIALIZATION MECHANICAL DESIGN( BIOMECHANICS, STRESS ANALYSIS, FINITE ELEMENT ANALYSIS) Research Interest: Development of Implant for human body (Hip, Dental and Knee) Medical Devices Compliant Mechanisms and Topology Optimization EDUCATION PhD (Mechanical Engineering) 2012 Universiti Putra Malaysia (UPM), MALAYSIA Thesis Title: Finite Element Analysis of Hip Implant in Bone Resorption Environment M.Sc. in Mechanical Engineering 1998 University of Toledo, OHIO, UNITED STATES OF AMERICA B.Sc. in Mechanical Engineering 1996 University of Alabama, Birmingham, UNITED STATES OF AMERICA 1

Page2 PROFESIONAL AFFILIATION Associate Asean Engineer (AAE) Board of Engineers Malaysia(BEM)- Member International Society of Biomechanics(ISB)-4881 The American Society of Mechanical Engineers(ASME) 100141257 The Institution of Engineers Malaysia(IEM)- Graduate member 2012 -PRESENT 2005-PRESENT 2011-PRESENT 2011- PRESENT 2012 -PRESENT LANGUAGE Malay English WORKING EXPERIENCE Tutor, School of Mechanical Engineering, Universiti 1998-2000 Sains Malaysia, at Tronoh, Perak. Lecturer, School of Mechanical Engineering, 2000 2005 Universiti Sains Malaysia, Nibong Tebal, Penang Senior Lecturer, School of Mechanical Engineering, 2005-2012 Universiti Sains Malaysia Assoc. Professor, School of Mechanical Engineering, 2012-2014 Universiti Sains Malaysia Assoc. Professor, Faculty of Mechanical 2014 present Engineering, UiTM Shah Alam, Selangor Leadership and Administrative Experience Program Chairman for Distance Study Learning 2003-2006 of Mechanical Engineering, Universiti Sains Malaysia Executive Board of School of Mechanical 2003-2006 Engineering, Universiti Sains Malaysia Academia and Research: Assoc. Professor/ Researcher 2012- PRESENT Panel Assessor (MSc; Proposals, and Progress Report) Panel Assessor (PhD; Proposals, and Progress Report) MSc Research Supervision PhD Research Supervision Chairperson for MSc, Ph.D Viva voce Panel Grant Assessor (ESF, Innofund, Technofund, FRGS, RAG, BESTARI) 2012- PRESENT 2012- PRESENT 2004-PRESENT 2013-PRESENT 2013-PRESENT 2013- PRESENT 2

Page3 Currrriculum Vitae: Assoc.Prof. Dr. Solehuddin bin Shuib A1 TEACHING AND LEARNING A1.1 List of Courses taught (1998 PRESENT) NO COURSE NAME LEVEL YEAR 1 Engineering Drawing Bachelor 99,01,03, 04, 05,06, 11, 12, 13 2 Engineering Design I (CAD) Bachelor 00,01, 03, 04,05, 11, 12 3 Engineering Design II(Machine Bachelor 00, 03, 11, 12 Component Design) 4 Engineering Design III(Machine Design) Bachelor 06, 12 5 Engineering Design IV(System Design) Bachelor 12,13 6 Final Year Project I Bachelor 99-06; 11-13;14 ;15 7 Final Year Project II Bachelor 99-06; 11-13; 14;15 8 Vibration in Machine Industries Bachelor 99,00 9 Mechanical Vibration and Control Bachelor 01, 03, 04 10 Kinematics and Dynamics of Machine Bachelor 99 11 Engineering Mechanics(Dynamics) Bachelor 00, 03, 04, 09 12 Dynamics & Mechanisms Bachelor 01, 02, 04 13 Engineering Practice Bachelor 05 14 Solid Mechanics Bachelor 05, 06 15 Finite element method Bachelor 05 16 Engineering lab Bachelor 99,00,01,02,03,04,05,06, 11, 12, 13 17 Numerical method for engineers Bachelor 14 18 Control Engineering Bachelor 14 19 Mechanical Engineering Design I Bachelor 14, 15, 16 20 Mechanical Engineering Design II Bachelor 15, 16, 17 21 SPS752: Biomechanics of Human Master 14 Performance 22 Engineering Dynamics Bachelor 16, 17 23 Engineering Statics Bachelor 16 24 Management of innovation Master 15,17

Page4 A2 SUPERVISION OF THESIS/ DISSERTATION/ PRACTICAL TRAINING A.2.1 Postgraduate (PhD) Main Supervisor (except when stated) No. Name of students Thesis/Research title Year 1. Maya Genisa Biomechanics of dental implant: 3 2017 Dimensional bone assessment using CBCT from laboratory to clinics. 2. Zainal Abidin Arsat An innovation of high-flexion femoral 2013-3. Shafiq Bin Suhaimi component for total knee arthroplasty Characterization of Bio-Inspired Flapping Wing with Compliant Morphing Mechanisms Based on Bat Wings. Ongoing 2017 -ongoing A.2.2 Postgraduate (Master) Main Supervisor (except when stated) No. Name of students Thesis/Research title Year 1 Mohd. Nizam bin Ahmad Multi-Criteria Optimization of Hip 2004 Prosthesis to Reduce Stress Shielding. 2 Mohd. Ikhwan Zaini bin Topology Optimization of Hip Implant to 2005 Ridzwan Reduce Stress Shielding. 3 Muhammad Saiful Islam Bin Development of dental implant in bone 2017 Mohd Izra'ai (2013175123) resorption environment. MEM 750 4 Muhammad Faris bin Abd Establishment of newly designed cemented 2017 Manap -2014866284 hip prosthesis to improve implant life MEM 750 5 Nursuhana binti Alauddin Systematic Cost Analysis Using Itakona 2017 MEM798 Approach forprinting Part 6 Nur Faiqa binti Ismail MEM750 Finite Element Modeling Of Uncemented Hip Stem Primary Fixation: The Effect Of Bone Visco-Elastic Properties To The Interference Fit 2016 Ongoing

Page5 B. RESEARCH NATIONAL LEVEL RESEARCH FUNDING Research Project Source Total Fund Begin year End Year 1 Impact Response Studies of e-science RM 1 SEPT. 2007 31 OGOS, Knee Implant for Performing MOSTI 211,028.00 2009 High Flexion Activities(LEADER) 2 Biomodeling for cranio- RU-T RM 1 Nov. 2013 30 October. maxillofacial reconstruction: USM 999,089.00 2017 aesthetical and functional patient specific biomaterial implants and Prostheses (MEMBER) 3 Biomechanical characterisation FRGS RM 79,200.00 1 Dec. 2014 30 Nov. 2016 of cranio-maxillofacial MOHE resorption model(leader) Ref: FRGS/2/2014/TK01/UITM/02/1 4 Fundamental studies of Natural FRGS RM 79,200.00 1 Dec. 2014 30 Nov. 2016 Rubber Latex films for Bio- MOHE inspired micro air vehicle (MEMBER) Ref: FRGS/2/2014/TK01/UITM/02/4 Prototyping Of Porous Niti Alloy PRGS MOHE RM210,410.00 15 Aug. 2017 14 Aug. 2019 5 Screw And Abutment By Metal Injection Moulding (MIM) (MEMBER) UNIVERSITY LEVEL RESEARCH FUNDING Research Project Source Total Fund Begin year End Year 1 Compliant Mechanisms USM-SHORT RM13,700.00 1 Sep. 2000 30 Nov 2001 TERM 2 Structural Optimization using USM-SHORT RM17,600.00 16 Apr. 2001 30 Apr. 2003 Multi-Criteria TERM Optimization 3 Fatigue Analysis of a compliant USM-SHORT RM8,806.00 15 April. 14 April 2006 aircraft wing TERM 2004 4 Topology Optimization of Hip USM-SHORT RM19,700.00 1 Sept. 2004 31 August Implant to reduce TERM 2006 stress shielding 5 Shape Optimization for moving USM-SHORT RM 19,400 1 Feb. 2005 31 Jan. 2007 node of vibration to assigned TERM position 6 Topology Optimization of Knee USM-SHORT RM19,700.00 1 Sept. 2006 31 August Implant to reduce stress TERM 2008 shielding Development of bone USM 1 Apr. 2011 31 Mar, 2012 7 resorption algorithm for hip Incentive RM5000.00 prosthesis grant

Page6 8 Failure analysis of femoral hip USM-SHORT RM31,900.00 1 June. 2011 31 May, 2013 prosthesis TERM 9 Maxillofacial Implants Research REI RM 32,000.00 1 May 2015 30 April 2018 Group (Member) Ref: 600-RMI/DANA 5/3/REI (11/2015) 10 Finite Element Modeling Of LESTARI RM 20,000.00 1 Dec 2015 31 Nov 2017 Uncemented Hip Stem Primary Fixation: The Effect Of Bone Visco-Elastic Properties To The Interference Fit (Member) 11 Identification Of Low Diffuse LESTARI RM 20,000.00 1 Dec 2015 31 Nov 2017 Reflective Marker For Motion Capture Application In Teaching And Learning Environment Active (Member) 12 Fundamental Study of BESTARI RM35,000.00 1 Sep 2016 31 Ogos composite hip implant to 2018 improve fatigue and impact resistance(leader) 13 Finite Element Modeling Of GIP RM20,000.00 1 JULAI, 2017 30 JUNE, 2018 Uncemented Hip Stem Primary Fixation: The Effect Of Bone Visco- Elastic Properties To The Interference Fit. 14 Establishment Of A Newly Designed MITRA RM100,000.00 1 Oktober, 30 September, Cemented Hip Prosthesis (HP) To 2017 2019 Improve Implant Life C. PUBLICATIONS (last five years) C1 THESIS AND TECHNICAL REPORT 1] Zulaiha Ali Othman, Zurina Muda, Solehuddin Shuib, Kematangan sosial ke arah Masyarakat Harmoni, Akademi Penyelidikan Haluan, 2015 [9789671073193]. 2] Zulaiha Ali Othman, Zurina Muda, Solehuddin Shuib, Kematangan sosial ke arah Masyarakat Harmoni, Akademi Penyelidikan Haluan, 2016 [9789671073193]. C2 REFEREED JOURNAL PAPERS 1] Maya Genisa, Zainul Ahmad Rajion, Solehuddin Shuib, Dasmawati Mohamad and Abdullah Pohchi, Stress Analysis During Post Loading On Implant System Using Finite Element Analysis Method, Trends in Biomaterials & Artificial Organs, Vol 29, No 1, 31-35. (2015) (ISI). Q2. 2] Maya Genisa, Zainul Ahmad Rajion, Solehuddin Shuib, Dasmawati Mohamad, Abdullah Pohchi, and Mohd Rafiq Abdul Kadir Effect of Different Angle Scanning on Density Estimation Based on Hounsfield Unit on CT and CBCT, Sains Malaysiana, Vol 44, No 9, pg 1331-1337. (2015) (ISI). Q2. 3] Zainal Abidin Arsat, A. Halim Kadarman, Amran Ahmed Shokri, Mohd Ezane Aziz, Solehuddin Shuib, 'Magnetic Resonance Imaging Sequence Analysis of Tibiofemoral Contact Area Assisted by MATLAB Software', Jurnal Teknologi (Sciences & Engineering) 76:7 (2015) 1 5, (ISI). Q3. 4] Maya Genisa, Zainul Ahmad Rajion, Solehuddin Shuib, Abdullah Pohchi and Dasmawati Mohamad, 'Behavior of Implant Stability during Implant Treatment: In Vivo Study', Jurnal Teknologi (Sciences & Engineering) 76:7 (2015) 51 55 (ISI). Q3.

Page7 5] Muhammad Faris Abd Manap, Solehuddin Shuib, Ahmad Zafir Romli, Amran Ahmed Shokri, `The influence of femoral ball size on the range of motion that fulfills the criteria of safe zone orientation acetabular cup', Jurnal Teknologi (Sciences & Engineering) 76:7 (2015) 31 35, (ISI). Q3. 6] S. Suhaimi, H. Yusoff, N. Iswadi, Sh. Mohd Firdaus, S. Shuib, M. K. Abdullah, A. A. Rashid, `Natural Rubber Latex Fabrication for Bio-Inspired Flapping Wing Skin Based on Bat Wings, Journal of Mechanical Engineering and Automation, 2016; 6(6): 151-155. 6] A Halim Kadarman, Ahmad Yusoff Hassan, Solehuddin Shuib, Thin-walled Box Beam Bending Distortion Analytical Analysis, Vol. 14, No. 1, 1-16, 2017. 7] Muhammad Faris Abd Manap, Solehuddin Shuib, Ahmad Zafir Romli, Finite Element Study Of Acetabular Cup At Contact Region For Total Hip Replacement (THR), Journal of Mechanical Engineering Vol. SI, No. 2(1), 71-82, 2017. 8] Maya Genisa,, Zainul Ahmad Rajion,, Solehuddin Shuib,,Dasmawati Mohamad, and Abdullah Pohchi, Evaluation Of Stress Distribution And Micromotion Of Dental Implant: In Vivo Case Study, ARPN Journal of Engineering and Applied Sciences, Vol. 12, No. 14, July 2017. ISSN 1819-6608 C3 PROCEEDING PAPERS(INTERNATIONAL/NATIONAL) 1] Saiful Islam Izra ai, Solehuddin Shuib, Zainul Ahmad Rajion, `Development of dental implant for craniofacial reconstruction in bone resorption environment to reduce failure: a systematic review, Seminar Pembangunan Modal Insan Ke-6 (SEMAI VI) & Seminar Siswazah Pertama 2014, 29 September, 2014. 2] Zainal Abidin Arsat, A Halim Kadarman, Amran Ahmed Shokri, Mohd Ezane Aziz, Shaifuzain A. Rahman, and Solehuddin Shuib, `A preliminary comparison of articulating surface contact area between normal knee and total knee arthroplasty, Seminar Pembangunan Modal Insan Ke-6 (SEMAI VI) & Seminar Siswazah Pertama 2014, 29 September, 2014. 3] Genisa M., Rajion Z.A., Solehuddin Shuib, Dasmawati M., Pohchi A, `Bone Quantity and Bone Quality Evaluation using Cone Beam Computer Tomography(CBCT), 10th ACOMER, Asian Congress of Oral and Maxillo-Facial Radiology, Bali, Indonesia, 20-22 November, 2014. 4] Solehuddin Shuib, Thor Ming Tze, Zainul Ahmad Rajion, and A. Halim Kadarman, Design Improvement of Dental Implant Based on Bone Remodeling, The ASME 2015 4th Global Congress on NanoEngineering for Medicine and Biology, Minneapolis, MN, USA, 19-22 April, 2015. 5] Zainal Abidin Arsat, A Halim Kadarman, Amran Ahmed Shokri, Mohd Ezane Aziz, Shaifuzain A Rahman, and Solehuddin Shuib, International Conference and Expo on Biomechanics & Implant Design, Orlando, USA, 27-29 July, 2015. 6] Solehuddin Shuib, Muhammad Zubair Abd.Rehim, Muhammad Faris bin Abd Manap, Amran Ahmed Shokri, A Study of the Performance of Metallic Tibia Tray Component in Total Knee Replacements(Invited paper), 4th International Conference on Advances in Mechanical Engineering(ICAME 2015), Bali, Indonesia, 26-27 August, 2015. 7] Saiful Islam Izra ai, Hazwan Zulkiflee, Solehuddin Shuib, and Zainul Ahmad Rajion, `Parametric Study of Design and Analysis of Dental Implant, Seminar Pembangunan Modal Insan Ke-7 (SEMAI VII) & Seminar Siswazah Kedua 2015, 16 November, 2015.

Page8 8] Faris Abd Manap, Solehuddin Shuib, Amran Ahmed Shokri, Ahmad Zafir Romli, Saiful Islam Izra ai, `Finite Element Study of Acetabular Cup Orientation Relation with Failure Analysis at Contact Region of Acetabular Component in Total Hip Replacement, Seminar Pembangunan Modal Insan Ke-7 (SEMAI VII) & Seminar Siswazah Kedua 2015, 16 November, 2015. 9] Shafiq bin Shuhaimi, Hamid bin Yusoff, Noor Iswadi bin Ismail, Sheikh Mohd Firdaus Nasir, Solehuddin Shuib, Muhammad Khalil bin Abdullah, Azura binti A. Rashid, Latex Fabrication For Bio- Inspired Flapping Wing Skin Based On Bat Wings, World Conference on Engineering and Applied Sciences(WCEAS), Kuala Lumpur, 28-29 May, 2016. 10] Maya, Solehuddin Shuib, et al, Effect of Cortical Thickness on stress distribution of dental implant : In vivo study, 2nd International Conference on Mechanical,Manufacturing and Process Plant Engineering(ICMMPE), Kuala Lumpur, Malaysia, 23rd 24th November, 2016. D CONSULTANCY AND INDUSTRIAL LINKAGE NO INDUSTRY/ ACTIVITY YEAR AMOUNT COMMUNITY 1 SELIA-TEK SDN BHD Modeling, analyzing and 1.10.1999 RM$26,000.00 41 Jalan SS 22/23, optimizing Aerial Bundled Cable 31.09.2000 Damansara Jaya Summary: To remodel, analyze Selangor Darul Ehsan and optimize components of ABC, to redesign a failure limit for each component at certain load, to identify a capacity range for components to meet a specification requirement. 2 UAC BERHAD Project Title: Mathematical 1.12.2000 RM$20,700.00 36, Jalan Portland, Modeling of tensile test on a 30.12.2001 Tasik Industrial corrugated sheet. Estate, 31400 Ipoh, Summary: Modeling the product Perak. and performing FEA using I-DEAS software. Analysis of the result and refining the model in order to understand the product behavior under tensile load, developing a mathematical model relating tensile load (T) to radius, r, pitch p, and thickness t. The corrugated sheet. Statistical analysis and verification of the correlation equation was performed. 3 MATSUSHITA Project Title: Small DC Motor: 01.11.2002 RM33,326.36 ELECTRONIC Noise and Vibration Improvement 14.04.2003 MOTORS(M) SDN BHD Summary: To reduce the vibration LOT 12, Jalan PKNK and noise level from the M1N10 Utama, Kawasan and M1N6 small d.c. motor Perindustrian Sungai manufactured by MAEM. Petani, P.O. Box 100, Sungai Petani 08000 Sungai Petani, 4 ADVANCED MEDICAL Project Title: Prototype of 5.03.2004 RM40,00.00 TECHNOLOGY SDN. autodisable syringe assembly 14.09.2004 BHD, 49-A, Lorong Bertam Indah Summary: Prototype of auto-

Page9 13200 Kepala Batas, disable syringe assembly Seberang Perai Penang 5 Module writer & Malaysian Institute Of Chemical June Nov. Lecturer for Engineering Training (MICET) 2002 Engineering Drawing Course 6 Malaysian Institute Module writer for teacher s and Jan. 2003 Of Chemical student s manual for Engineering March, 2003 Engineering Training Drawing Course, (MICET) 7 ITTAR Revised a module of Engineering (2003) Mechanics Course, 8 MINISTRY OF Project title: A study of public 1 Jan. 2005 31 RM 4.2Million EDUCATION School Maintenance. Dec, 2005 Summary: M& E 9 WAVE ENERGY SDN Project Title: A wave energy study 01.1.2003 BERHAD in Malaysia 30.09.2003 Summary: To do dynamics analysis and material selection of the wave energy simulator. 10 TZT Sdn Berhad Project Title: Shock absorber 21.4.1999 Summary: To Analyze to vibration 30.09.2000 level of a shock absorber. 11 Malaysian Institute Module writer & Lecturer for MAC, 2006 Of Chemical Mechanical Engineering Lab Engineering Training Course, (MICET) 12 ACESS SERVICES & Project title: Development of AC 15.11.2011 CONSULTING SDN. system for operation theater at 31.12.2012; BHD. Taman Setia, Barakah Hospital, Johan Setia, 15.7.2012 - Johan Setia, Klang Klang. 14.9.2012; 10.6.2013-9.8.2013; 1 Sept 2015-31 Aug. 2017; 13 PERMAI PRESTIJ Project title: Oil and Gas (O&G) 10.6.2013- SDN. BHD 9.8.2013 No. 64 & 64A, Jalan Badminton 13/29 Tadisma Business Park, Seksyen 13, 40100 Shah Alam, Selangor 14 UiTM Medical Project title: Facilities 1 March 2016- Campus,Sungai management of medical July 2016 Buluh, Selangor equipment di Medical Campus, UiTM Sungai Buluh, Selangor

Page10 E SPECIAL INVITATION/APPOINTMENTS/EXPERTISE E1 International level The editor for Journal of Applied Sciences, 2006 2008. A reviewer for the Journal of Applied Sciences (JAS), March 2007. A reviewer for the Journal of Applied Sciences (JAS), April 2007. A reviewer for the Information Technology Journal (ITJ), April 2007. A reviewer for the Asian Journal of Scientific Research (AJSR), June, 2007. A reviewer for the International Journal of Biological Chemistry(IJBC), 2007. A reviewer for the Journal of Applied Sciences (JAS), Dec. 2007. A reviewer for the International symposium on Mechanical Science and Technology (ISMST 2010. A technical assessor for the International Engineering for Sustainability Conference (inesco). A reviewer for International Conference on Biomedical Engineering and Sciences(IECBES 2012), 2012. A reviewer for Journal of Scientific Journal and Essays (SRE), 2012. A reviewer for 2014 IEEE TENSYMP IEEE Region 10 Symposium, Dec. 2013. Scientific Committee and Editorial Review Board, A reviewer for Journal of Medical and Biological Engineering (JMBE), August 2014. A reviewer for 2015 ICAME, Bali, Aug. 2015. A reviewer for the 2nd International Conference on Science and Social Research (CSSR) 2015. The editor of ICAME special topics, Aug. 2015. A chairman for Research, innovation, Symposium and Expository (RISE), 2015. An invited speaker ICAME 2015, Bali, Aug. 2015. A reviewer for ESTEEM Academic Journal (EAJ), April 2016. A reviewer for JMeche, September, 2016. A reviewer for IEEE-EMBS International Conference on Biomedical Engineering and Sciences(IECBES 2016), September, 2016. A reviewer for International Conference on Mechanical,Manufacturing and Process Plant Engineering(ICMMPE), Kuala Lumpur, Malaysia, 23rd 24th November, 2016. A reviewer for JMeche, 2016, 2017. A reviewer for The 7 th Intrernational Conference on Postgraduate Education(ICPE7), November, 2016. A reviewer for 2015 ICAME, Krabi, Aug. 2017. E2 National level 1. A reviewer for the Journal of Industrial Technology(SIRIM), May 2005. 2. Engineering Drawing textbook accessor, 2nd Edition, Penerbit UTM(21 November, 2004). 3. Solehuddin Shuib, 1-2 July 2003, Speaker for Solid Modeling & Rapid Prototyping Applications Workshop, School of Mechanical Engineering: Introduction to I-DEAS, USM, Nibong Tebal, Seberang Perai, Penang. 4. Solehuddin Shuib, 20-21 November, 2002, Series of lecture on Fundamental of Mechanical Vibrations, Matsushita Electronic Motor(M) Sdn. Bhd, Sg Petani, Kedah. 5. Solehuddin Shuib 19 Jan., 2002, Lecture on Career prospect in Mechanical Engineering at Sek. Men Teknik Nibong Tebal, Nibong Tebal, Seberang Perai, Penang. 6. Solehuddin Shuib, Lecture on Geometric Dimensioning and Tolerance, Green Precision, Sg. Petani, 19-20 September, 2005. 7. Solehuddin Shuib, Lecture on Geometric Dimensioning and Tolerance, Green Precision, Sg. Petani, 19-20 March, 2006. 8. Associate Fellow (ASM Associate) - Academy of Sciences Malaysia, (Since April, 2015- March 2018).

Page11 E3 University/Faculty level 1.Internal Examiner M.Sc. Thesis: Aziz@Awang bin Mat Ali, Design and Development of Roselle Calyx Harvester(March,2005), USM. 2.Internal Examiner M.Sc. Thesis: Ahmed Mohamed Abd ElMagid ElNaggar, Volume Determination of Smooth Surfaces Using Structured Lighting and Their Similarity Measure (Jan,2006), 3. Internal Examiner - MSc Thesis: Chong Shah Leong, Study of Flow Induced Vibration Using Finite Element Method (18 March 2002), USM. 4. Internal Examiner Ph.D. Thesis: Lau Chun Sean, Development, performance analysis and optimization of reflow soldering process for ball grid array application (March,2013), USM. 5. Internal Examiner Ph.D. Thesis: Investigation on Flexible type printed circuit board electronics in the flow environment (November, 2013), USM. 6. Associate member, Institute of Science(IOS), UiTM, 2014-2015, 2016-2018. 7. A member of Rig Maxillofacial Implants, UiTM, 2014-present. 8. Internal Examiner MSc. Thesis: Mastura Binti Abdul Rahim, Finite Element Implementation to predict failure of composite laminate (August, 2015), UiTM, Selangor. 9. External examiner MSc. Thesis: Wan Iryana Bt Wan Md Nor, Wrinkling Prediction in deep drawing metal forming: Application of kinematic model and mixed hardening model and experimental validation (June, 2017), UMP, Pahang. 10.Internal Examiner - MSc. Thesis: Mohd bin Mali, Deformation and Failure Analysis of Composite Laminate under Transverse Sinusoidal Loading, (September, 2017), UiTM, Selangor. 11.External Examiner MSc. Thesis: Ahmed Saieed, Two phase separation in T-junction, (October, 2017), UTP, Perak. F INNOVATION/INVENTION/DESIGN/PROFESIONAL COURSES ATTENDED 1. Continuous Education, Half Day Seminar on Building Designs in hot & Humid Climates, 24- May-2012., IEM, PJ., 2012. 2. Continuous Education, Talk on Plasticizers For Plastics â What, Where, How And Why, 01-Jun- 2012., IEM, PJ., 2012. 3. Continuous Education, Design Of Sprinkler System- MS1910, NFPA13 & NFPA15 Water Spray System, 11-Jul-2012., IEM, PJ., 2012. 4. Continuous Education, HVAC Design - Pumping system ad pump sizing, 30-Jul-2012., IEM, PJ., 2012. 5. Continuous Education, Professional Interview Workshop, 03-Nov-2012., IEM, PJ., 2012. 6. Program Orientasi Staf Baru(Pentadbiran) Siri 1/2014, 5-6 Mac, 2014. 7. Bengkel Kesedaran OBE, FKM-UiTM, 17 Feb. 2014. 8. Kursus introduction to CAE, 24 Feb. 2015. 9. ANSYS Training, special topics, PJ, 31 Dec. 2015. 10. Talented Accelerated Leadership Excellent Series(TALES), shaping the academic landscape, 31 March, 2016, ILD, UiTM, Shah Alam.Selangor 11. ANSYS Training, special topics, PJ, 31 Dec. 2016.

Page12 G COMMUNITY INVOLVEMENT(SOCIETY/UNIVERSITY/STUDENT) G1 SERVICE TO THE UNIVERSITY A. Administration 2. Head, MyRa, Research, Publication & Consultancy, FKM, 2015-2016 3. Director, IMETA (Institute of Mechanical & Technology Advancement), FKM, 2015-2016 4. Head of Center for Graduate Studies, 2016-2018 B. University Committee (Named As Member) 1. Committee member FRGS grant evaluation, cycle 1/2015, RMC Panel: Universiti Teknologi MARA, FMIA/Mechanical and Manufacturing. 2. Committee member RAGS grant evaluation, cycle 1/2015, RMC Panel: Universiti Teknologi MARA, FMIA/Mechanical and Manufacturing. 3. Committee member PAGS grant evaluation, cycle 1/2015, RMC Panel: Universiti Teknologi MARA, FMIA/Mechanical and Manufacturing. 4. Committee member TRGS grant evaluation, cycle 1/2015, RMC Panel: Universiti Teknologi MARA, FMIA/Mechanical and Manufacturing. 5. Panel penilai PRGS, Fasa 1/2016. 6. Panel penilai BESTARI, Fasa 1/2016. C.Faculty Committee (Named As Member) 1.Bengkel Penyediaan Dokumen Akhir Audit INQKA 2014, 11 Jun dan 13 Jun, 2014, FKM-Shah Alam. 2. Panel penilai dan pemeriksa kedua kertas soalan (kerja kursus) peperiksaan sesi Mac-Julai 2014, FKM Shah Alam (subjek MEC500 Numerical methods with applications). 3. Panel penilai dan pemeriksa kedua kertas soalan (kerja kursus) peperiksaan sesi Mac-Julai 2014, FKM Shah Alam (subjek MEC532 Mechanical Engineering Design II). 4. Penyelia/Penyelia kedua projek tahun akhir bagi sesi Mac-Julai 2014, FKM Shah Alam. 5. Bengkel maklum balas penilaian program baru Master of Science in Mechanical Engineering, 8 Ogos, 2014, FKM-Shah Alam. 6. Bengkel Perancangan fakulti, Janda baik, 31 Mei- 2 Jun, 2015. 7. Bengkel Science to action, fakulti, Mac 2015. 8. Panel penilai dan pemeriksa kedua kertas soalan (kerja kursus) peperiksaan sesi Sept-Dis 2015, FKM Shah Alam (subjek MEC635 Design Optimisation). 9. Chairperson, DRP, FKM, 30 Sept. 2015. 10. AJK, Jawatankuasa kecil kurikulum (JKKF), 4 JAN 2016-03 Jan. 2017 11. Panel penilai dan pemeriksa kedua kertas soalan (kerja kursus) peperiksaan sesi 2016, FKM

Page13 12. Penilai permohonan FRGS peringkat FKM, 1 Mac 2016-28 Feb. 2017. 13. AJK Tabung Amanah FKM, 1 Mac 2016-28 Feb. 2017. 14. AJK Kewangan FKM, 4 Jan 2016-03 Jan. 2017. 15. AJK Teknikal Peralatan, FKM, 1 Mac 2016-28 Feb. 2017. 16. Pengerusi viva calon sarjana, Mohamad Shamil bin Jaffarullah, 25 Mac. 2015 17. AJK Special Edition,JMECHE, September 2016 18. Ketua panel temuduga lantikan skim postgraduate teaching assistance(upta), sessi 2016/2017 G2 COMMUNITY SERVICES A. International Level 1. Advisor for innovation project for SEKOLAH SAINS TUN SYED SHEIKH SYAHABUDIN, Bukit Mertajam, Penang, 2014. B. National Level 3.Advisor for innovation project for SEKOLAH SAINS TUN SYED SHEIKH SYAHABUDIN, Bukit Mertajam, Penang, 2014. C. State Level 1. A judge,karnival Pendidikan Sains Dan Teknologi 2012,10/7/2012-12/7/2012. 2. A Judge,Pertandingan Robotik Kebangsaan(NRC) Zon B Pulau Pinang,12/6/2012-14/6/2012. 3. Advisor for innovation project for SEKOLAH SAINS TUN SYED SHEIKH SYAHABUDIN, Bukit Mertajam, Penang, 2014. D. District/University/School/Kampung Level 1. A speaker, Seminar Hijrah Menara Gading anjuran bersama Yayasan Felcra dan Haluan Malaysia, 29 April, 2014. 2. A speaker, Ihya Ramadan sempena Program Ihya Ramadan UPNM, 30 Jun, 2014. 3. A speaker, Kem kepimpinan mahasiswa, Kolej Teknologi Darul Naim, 13 Feb. 2015. 4. A speaker, FKM Research Booth Camp 2016, Suria Hot Spring, Bentong, Pahang, 30 April, 2016. 5. Speaker, Bengkel Engineering Materials Characterization workshop series I, FKM, UiTM Permatang Pauh, 28-29 Mac, 2016. 6. Speaker, Bengkel PPRN dan MyRA, Kampus Kejuruteraan, UiTM Pasir Gudang, 10 April, 2016.

Page14 H AWARD/RECOGNITION/APPRECIATION 1.Panel Penilai Pakar Dana R,D & C, 1 Mac 2012-31 Dec. 2015. 2.A technical panel for Technofund Klaster Industri Bil. 11/2011, Kementrian Sains, Teknologi dan Inovasi, 22 Nov. 2011. 3.A technical panel for Penilaian Sciencefund and Technofund di bawah klaster industri 2012 23.The editor for Journal of Applied Sciences, 2006 2008. 4.Scientific Committee and Editorial Review Board, World Academy of Science, Engineering and Technology, 2012 present. 5. A technical panel for projek khas MOSTI dan Permohonan Baru Technofund Klaster Industri 2013. 6. A technical panel Mesyuarat Susulan Penilaian Bagi Permohonan Projek Khas Technofund Klaster Industri2013. 7..A technical panel, Penilaian Projek ScienceFund,Innofund Klaster Industri, 2013. 8. A technical panel, Penilaian Projek Sciencefund, Innofund, Technofund Klaster Industri, 2014. 9. A technical panel,penilaian Projek Sciencefund, Technofund Klaster Teras Sains & Teknologi, 2014. 10. A technical panel, Projek Dana Mosti Di Bawah Klaster Angkasa, Laut Dan Atmosfera,2014. 11. A technical panel,permohonan Baru Kertas Konsep Bagi Peruntukan Khas Agensi, 2014. 12. Site visit and technical panel for Technofund Klaster industri, TF0314F056, 2014. 13. Editorial board, Archives of Orofacial Sciences, 1 Oct. 2013-30 Sept. 2015. 14. A technical Panel,Bengkel Pemantauan Projek Sciencefund, Technofund Klaster Industri, 2014. 15. A technical panel, Penilaian Projek ScienceFund,Innofund, Technofund, Klaster Industri, 2015. 16. A technical Panel,Bengkel Pemantauan Projek Sciencefund, Technofund Klaster Industri, 2015. 17. The Best Award Paper:Zainal Abidin Arsat, A. Halim Kadarman, Amran AhmedShokri, Mohd Ezane Aziz and Solehuddin Shuib, Magnetic Resonance Imaging Sequences Analysis Of Tibiofemoral Contact Area Assisted By MATLAB Software, The International Conference On Advances In Mechanical Engineering 2015 (ICAME 2015), 26th-27th August 2015, Bali Indonesia. 18. The Best Award Paper: Genisa M., Rajion Z.A., Solehuddin Shuib, Dasmawati M., Pohchi A, Behavior of Implant Stability during Implant Treatment: in Vivo Study, The International Conference On Advances In Mechanical Engineering 2015 (ICAME 2015), 26th-27th August 2015, Bali Indonesia. 19. Bronze medal, Innovative design Implant, Research Innovations Symposium and Exposition (RISE) 2015, 15th-16th November 2015, Shah Alam, Selangor, MALAYSIA. 20. Bronze medal, Hi flexion TKR, Research Innovations Symposium and Exposition (RISE) 2015, 15th-16th November 2015, Shah Alam, Selangor, MALAYSIA. 21.A technical panel, Penilaian Strategik Technofund, Innofund Dan Sciencefund Klaster Industri Bil. 1/2016, January 2016. 22. Panel Penilai Pakar Dana R,D& C, 1 Mac 2016-31 Dec. 2018. 23. Invited speaker, Sharing on Biomechanics, Faculty of Mechanical Engineering, UMP, 23 Aug. 2016.

Page15 24. Silver medal, Surgical Grasper using compliant mechanisms, Invention, Innovation & Design Exposition(IIDEX) 2016, 20th-23th September, 2016, Shah Alam, Selangor, MALAYSIA. 25. Anugerah Khidmat Cemerlang, FKM UiTM bagi tahun 2015. 26. Associate Member, Majlis professor Negara(MPN), KlusterKejuruteraan, Teknologi Dan Alam Bina, dan Kluster Industri Dan Inovasi, 2016- present 27. Gold medal, Porous NiTi Implants via innovative route of metal injection moulding, 28th International Invention, Innovation and Technology Exhibition (ITEX 2017), 11th-13th May, 2017, KLCC, Kuala Lumpur, MALAYSIA. 28. Gold medal, Porous NiTi Implants via innovative route of metal injection moulding, International Conference and Exposition on Inventions by Institutions of Higher Learning (PECIPTA), 7th-9th October, 2017,Kuala Nerus, Trengganu, MALAYSIA. References Professor Ir. Dr. Hj. Muhammad Azmi bin Ayub, Faculty of Mechanical Engineering, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, MALAYSIA Tel.: +603 5543 5161 E-mail: muhammadayub@salam.uitm.edu.my Professor Ahmad Kamal Ariffin Mohd. Ihsan Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia 43600 Bangi, Selangor, MALAYSIA Tel.: +603-8911-8417 E-mail: kamal3@ukm.edu.my Professor Ir Dr Barkawi bin Sahari Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, MALAYSIA Tel.: +603 894 67536 E-mail: barkawi@eng.upm.edu.my