technical training PRogRaM

technical training customer PRogRaM

foreword The correct operation and maintenance of your MTU Detroit Diesel Australia product is imperative to ensuring that you receive all the benefits of lower maintenance costs, minimum down time and market leading fuel consumption. To achieve this, MTU Detroit Diesel Australia provide the highest level of factory backed technical training to ensure that you are kept abreast of advances in technology and that your equipment is operated and maintained to the highest standard. Our schedule continues to evolve with minor changes reflected in courses to keep in step with updated products. This year will see a new range of customer courses for operators and maintainers, and along with these we will continue to provide, where required, training courses tailored to suit your specific needs. All courses are conducted at our state of art regional training centres located in Perth, Brisbane, Melbourne and Sydney. We can also provide on site training where required, (please note that additional charges may apply), so contact your MTU Detroit Diesel Australia Training Team for further information. Please take a moment to view the curriculums, prerequisites and conditions for our standard customer courses within this program and if you require further information please don t hesitate to contact your MTU Detroit Diesel Australia Technical Training Team. Regards Bob Akers - National Technical Training Manager Training Program /// 1

table of contents Foreword 1 Table of Contents 2 Terms & Conditions 3 Terms Conditions Training Request Form 5 Training Regional Trainers Request Form 6 5 Regional Trainers 6 MECHANICAL COURSES MechaNical Detroit Diesel courses 8 Detroit Mercedes-Benz Diesel 98 Mercedes-Benz MTU 10 MTU 11 TRANSMISSION COURSES Allison Transmissions 12 transmission courses Allison ELECTRONIC Transmission COURSES 13 Detroit Diesel 15 electronic Mercedes-Benz courses 16 Detroit Diesel 15 MTU 16 2 /// Training Program

terms & conditions 1. application Applications for participation in training courses using the MTU Detroit Diesel Australia Training Centres are to be submitted in writing using the MTU Detroit Diesel Australia application form included into this training program providing details of the desired course: Submission of an application indicates recognition of the following conditions. The applicant is is bound by by their their application until until 6 weeks 6 weeks after after its receipt by MTUDDA. Detroit Diesel Australia. The contract is is finalised on on issue issue of of a written a written acceptance of of application by by MTUDDA. Detroit In Diesel the case Australia. of courses In the case for which of the courses, maximum for number which the of maximum participants number has already of participants been accepted, has already the been applicant accepted, will be the informed applicant and will given be informed details and of the given next details available of the next course. available course. The data received with with the the application will will be be treated treated confidentially, in in compliance with with the the current current data data protection protection legisla- legislation, and recorded and recorded for internal for administration internal administration purposes. purposes. The applicant The hereby applicant acknowledges hereby acknowledges and accepts and that accepts any personal that any information personal received information by MTU received Detroit by Diesel MTUDDA Australia may may be reasonably be expected to reasonably be used for expected a secondary to be purpose used for a associated secondary with purpose the application associated or conduction with of the the application, training course. or conduction of the training course. 2. cancellation The contract may be cancelled in writing: By MTUDDA Detroit Diesel Australia When the number of applicants does not allow economical completion of the course In the event of sickness of the instructor or for any other important reason. Course fees already received in payment will be returned. No other form of regress is possible. By the customer Free of charge up up to to four 4 weeks prior the scheduled commencement commencement of the course. of the course. In the case of of cancellations received received by by MTU MTUDDA Detroit Diesel later than 4 Australia weeks but later more than than four 14 weeks days, but at more the latest, than 14 prior days, the at scheduled the latest, prior commencement the schedules of commencement the course, 50% of of the the course, agreed 50% fees of shall the agreed be fees forfeit. shall be forfeit. In In the the case case of of cancellations cancellations received received by by MTU MTUDDA Detroit Diesel later than 14 Australia days prior later to scheduled than 14 days commencement prior to schedules of the commencement course, or by of nonappearance the course, or by of non-appearance the trainee the of full the amount trainee of the fees full amount shall be of payable. fees shall The customer be payable. has the right, with no increase in cost, to send an The customer has the right, with no increase in cost, to send an alternative trainee to participate in any courses he has reserved alternative trainee to participate in any courses he has reserved and and paid for. paid for. 3. execution deviations MTUDDA Detroit reserves Diesel Australia the right reserves to provide the right a substitute to provide instructor, a substitute to slightly instructor, modify, to slightly or up-date, modify, or the up-date, course the curriculum course curriculum and, with and, adequate with adequate notice, to change to change the course the course schedule schedule and and location. location. If the If the customer is notice, unable is unable to to participate in in a course due to to modification of of the the schedule, schedule, he is entitled is entitled to a to course a course reservation reservation another on another schedule. schedule. 4. QUalificatioNS The qualifications listed in the course descriptions are prerequisites for the course participation. In the interests of all concerned, the instructor assigned to a specific course shall decide as to the participation of any trainee whose qualifications are not as specified. 5. course fees Course fees are stated in the registration confirmation and are to net prices without discount or other form of rebate. Payments are to be effected as indicated on the registration confirmation. Payment by the due date is a prerequisite for participation in the training. 6. copyright MTUDDA Detroit reserves Diesel Australia all rights reserves to the the training rights to documentation, the training including translation, documentation, reprints including and translation, copying, reprints either the and whole copying, or either extracts the thereof. whole or No extracts part thereof. training No part of documentation the training documentation may be reproduced may be reproduced in any way, in in any particular way, in particular by the employment by the employment of electronic of electronic systems, systems, nor nor shall shall it it be be copied, copied, dispersed dispersed or used or for used open for publication, open publication, without the without prior permission, the prior in permission, writing, of MTU in Detroit writing, Diesel of MTUDDA. Australia. 7. copyright PRotectioN The software employed during courses of instruction is subject to copyright protection. The software may not be removed from the training areas, nor may it be copied either the whole or part thereof or otherwise rendered useable in any non-approved form. Rights of use of MTUDDA Detroit software Diesel Australia products, software or other products, third parties, or other as third far parties, as these as far are as required these are for required completion for completion of the course of the curriculum course are curriculum included in are the included course fees in the for course the duration fees for the of the duration course. of the All course. kind of All kind documentation of documentation from MTUDDA from MTU may Detroit not Diesel be copied Australia without may not permission. be copied without permission. The use of cameras within the training centre is not We reserve the right to claim recompense for any damages permitted. We reserve the right to claim whatsoever. recompense for any damages whatsoever. Training Program /// 3

8. limits of liability terms & conditions The courses are are prepared prepared and and executed executed with with great great care care and and expertise expertise by by instructors instructors from from MTU MTUDDA. Detroit Diesel Except Australia. in cases Except of gross in cases negligence of gross negligence or serious/wilful misconduct, MTU Detroit Diesel Australia is not or serious/wilful misconduct, MTUDDA is not liable to the applicant liable to the applicant in any way whatsoever. MTU Detroit Diesel Australia shall in anyway not be whatsoever. liable for any MTUDDA indirect, special shall not or consequential be liable for any loss indirect, of any kind special suffered or consequential by the applicant loss (including of any kind loss suffered of profit, by revenue the applicant or income, production, (including loss use, product, of profit, business, revenue or income, production, use, product, contracts, business, investment contracts, or investment other opportunity) or other arising opportunity) out of or arising in out of or connection in with with the application the application or the or participation the participation in the training the training course, whether course, in whether contract, in tort contract, (including tort negligence) (including negligence) or equity, under or equity, statute or otherwise. under statute or otherwise. No liability is accepted for the loss or damage to course participant s No liability is accepted for the loss or damage to course participant s personal property during courses conducted in buildings and on property owned personal by property MTU Detroit during Diesel courses Australia. conducted Notwithstanding in buildings any other and on provision property in this owned document, by MTUDDA. Detroit Notwithstanding Diesel Australia any total other aggregate provision liability in in this connection document, with MTUDDA the application total aggregate or the training liability courses in connection is limited to with $100,000. the application or the training courses is limited to $100,000. 9. Place of jurisdiction The place of jurisdiction for all controversies arising from the contract is the State of New South Wales. The parties hereby accept that the laws of that State shall apply exclusively to this application and the training course in general. 4 /// Training Program

TRAINING REQUEST FORM Please complete the the Training t raining Request Request Form form below below and and return return it to it the to nearest the nearest MTU Detroit MTU Diesel Detroit Australia Diesel Training Australia Centre. Training Centre. Once course numbers are are confirmed confirmed you you will will receive receive a Training a Training Offer Offer outlining outlining dates dates and locations and locations available. availabe. On acceptance of the Training On acceptance Offer your of the position Training on Offer the your course position will on be course confirmed. will be confirmed. Applicant Name Employer Name Employer Address Suburb/Town Postcode Company Contact Employer Phone No Fax No Email Address Training Program Preferred Program Location Training Program /// 5

RegioNal TRAINERS trainers MTU Detroit Diesel Australia NSW Training Centre Kings Glendenning Park 11-13 Unit 1/7 Garling Kilto Crescent Road KINGS GLENDENNING PARK NSW 2148 2761 Phone: 02 8602 6300 Fax: 02 8602 6390 Shaun Davis MTU Detroit Diesel Australia VIC Training Centre Melbourne 488 Blackshaws Road ALTONA NORTH VIC 3025 Phone: 03 9242 9292 Fax: 03 9243 9271 William Galea MTU Detroit Diesel Australia WA Training Centre Perth 22 Stockyards Lane HAZELMERE WA 6055 Phone: 08 9274 7777 Fax: 08 9274 5931 Mark Scott MTU Detroit Diesel Australia QLD Training Centre Brisbane 147 Archerfield Road RICHLANDS QLD 4077 Phone: 07 3877 6060 Fax: 07 3877 6092 Russell Koch 6 /// Training Program

Mechanical Courses Training Program /// 7

ENGINE E MECHANICAL M C COURSE DETROIT DIESEL SERIES 60 LEGACY MAINTENANCE major repair COURSE OBJECTIVES Provide service personnel with the skills and knowledge required to carry out maintenance, troubleshooting and repairs specific to the Series 60 Non EGR Engine Operators and Maintainers PREREQUISITE ISITE Basic knowledge of diesel engines and course language CURRICULUM Theory and operation of the Series 60 engine range Basic engine principles for fuel, air, lube and cooling systems Troubleshooting PRACTICAL WORKSHOP ACTIVITIES ACTIVITIES Injector replacement Camshaft replacement Camshaft thrust collar seal replacement Cylinder head replacement Adjustable idler gear backlash setting Engine timing verification Tune-up procedures PARTICIPANTS DURATION Three Days COURSE FEE $412.50 including GST per person, per day ADR80/02 SERIES 60 update MAINTENANCE COURSE OBJECTIVES Update service personnel with the skills and knowledge required to carry out maintenance, troubleshooting and repairs specific to the ADR80/02 on highway Series 60 engine fitted with EGR Operators and Maintainers PREREQUISITE Series 60 Legacy Maintenance CURRICULUM Theory on the following: Exhaust emission standards Series 60 evolution Engine construction EGR air intake system Fuel, lube and cooling systems Tune-up procedure Troubleshooting Special tools PRACTICAL WORKSHOP ACTIVITIES Partial engine disassembly/reassembly Engine timing verification Engine tune-up PARTICIPANTS DURATION Two Days COURSE FEE FEE $ 412.50 including GST per person, per day DD13/15 MAINTENANCE COURSE OBJECTIVES Expose trades people and advanced apprentices to the skills necessary to diagnose and service Detroit Diesel DD13/15 engines. Operators & Maintainers PREREQU ISITE Basic knowledge of diesel engines & course language CURRICULUM Identification and External Components Systems Overview Fluid and Lubrication requirements Preventative Maintenance Code Handling and Regeneration Procedure PRACTICAL ACTIVITIES Engine Walk around Demonstration of Preventative Maintenance Demonstration of Code Handling and Regeneration Procedure PARTICIPANTS Min.6 Max. 10 DURATION 4 Hours COURSE FEE $ 412.50 plus GST per person 8 /// Training Program

ENGINE E MECHANICAL M C COURSE DETROIT DIESEL MERCEDES DETROIT // DIESEL Mercedes-Benz BENZ MBE 4000 MAINTENANCE MAjor repair COURSE OBJECTIVES Provide service personnel with the skills and knowledge required to carry out maintenance, troubleshooting and repairs specific to the Series MBE 4000 Engine Operators & Maintainers PREREQUISITE Basic knowledge of diesel engines & course language CURRICULUM Theory and operation of the Series MBE 4000 engine range Basic engine principles for fuel, air, lube and cooling systems Troubleshooting Tune-up procedures performed on running engine wherever possible Partial engine disassembly and reassembly Overview of upgrade to meet the requirements of ADR80/02 PARTICIPANTS DURATION Three Days COURSE COURSE FEE FEE $415.50 plus GST per person, per day with lunch provided DD13/15 MAINTENANCE COURSE OBJECTIVES Expose trades people and advanced apprentices to the skills necessary to diagnose and service Detroit Diesel engines. Operators & Maintainers PREREQUISITE ISITE Basic knowledge of diesel engines and course language CURRICULUM Identification and External Components Systems Overview Fluid and Lubrication requirements Preventative Maintenance Code Handling and Regeneration Procedure PRACTICAL ACTIVITIES Engine Walk around Demonstration of Preventative Maintenance Demonstration of Code Handling and Regeneration Procedure PARTICIPANTS Six to Ten DURATION Four Hours COURSE FEE $415.50 plus GST per person OM SERIES CM1/C OM SERIES COURSE OBJECTIVES Provide service personnel with the skills to diagnose and service OM 400, 500 & 900 Series Mercedes Engines. Operators and Maintainers PREREQUISITE ISITE Basic knowledge of diesel engines and course language CURRICULUM Theory subjects Engine construction Fuel system Cooling system Air intake system Lubrication system Preventative maintenance Engine tune up TEMIC & Mini-Diag PRACTICAL WORKSHOP ACTIVITIES Partially Dismantle OM 900, OM 400 & OM 500 Series engines Dismantle check and reassemble fuel system Cooling system Air intake system Lubrication system Reassemble engine as per manual Perform engine tune up Use Mini-Diag as per manual PARTICIPANTS DURATION Three Days COURSE FEE FEE $412.50 including GST per person, per day Training Program /// 9

ENGINE MECHANICAL COURSE MTU ENGINE SERIES: 2000 PLD C M1/M (MARINE) 2000 2000 PLD PLD CM1/M CM1/ C (CON (MARINE) IND) 2000 PLD CM1/C (CON & IND) 2000 2000 CR CR CM1/M (MARINE) 4000-01 CM1/C C (CON & IND) 4000-01 CM1/M (MARINE) 4000-03 CM1/ C (CON & IND) AVAILABLE UPON REQUEST The following engine training programs are no longer scheduled, but are available upon customer request Detroit Diesel Series 53/71/92 Familiarisation MTU 183 CM1-M Marine Familiarisation Series 60 CM1/M Marine VM Motori D700 Series Engine Familiarisation COURSE OBJECTIVES Understand engine design, structure and function Understand function and operation of the engine systems Perform maintenance tasks to Qualification Level QL1 (W1-W4) Identify and rectify minor faults Operate the engine plant Operators and Maintenance Personnel PREREQUISITES Basic knowledge of diesel engines and course language CURRICULUM Handling of documentation Design and function of the engine Explanation of the air, fuel, lubrication and cooling systems Explanation of the fluids and lubricants specification Execution of maintenance tasks up to and including Qualification Level QL1 (W1-W4 Service Echelons) Troubleshooting Introduction to engine management system PARTICIPANTS DURATION Five Days COURSE FEE $550.00 including GST per person, per day PARTICIPANTS DURATION Available on request COURSE FEE $ 412. 50 including GST per person, per day 10 /// Training Program

Transmission Courses Training Program /// 11

TRANSMISSION transmission COURSES courses ALLISON allison TRANSMISSION allison allison diagnostic 1000 & 2000 tool (doc) product families maintenance course objectives COURSE Expose fleet OBJECTIVES maintenance personnel to the At skills the necessary completion to of service this program, Allison students electronic will control be able systems to carry using out maintenance DOC (Diagnostic and basic troubleshooting on 1000 & 2000 Optimised Connection). Series Transmissions fitted with 4th Generation electronic control. target trainees Fleet Maintenance Personnel Students need to be qualified tradespersons or 3rd curriculum / 4th year apprentices Allison DOC for PC (Diagnostic Optimised curriculum Connection) is the essential tool for use Theory with on both the MD/HD following: product lines and the y 1000/2000/2400 Product Familiarisation Series transmissions y Understanding Basic construction of the operations, specific y electronic Torque converter input/output operation functions & stall testing and circuitry procedure y Planetary gear set & clutch operation Mandatory vehicle interface connections y Hydraulic operation System diagnostics/troubleshooting, and y Basic electrical circuit testing y reprogramming Operation of the 4th selected Generation parameters electronic Navigating control system through the tool s computer y screens; Troubleshooting using the of mechanical, demo mode, hydraulic graphics monitor, and electronic and strip faultschart options y Accessing Maintenance specific requirements troubleshooting / servicing manual procedures pages within the tool Practical Activities: y Identifying all external mechanical and PaRticiPaNtS electronic components y Performing a stall test & hydraulic pressure test duration y Using Allison DOC diagnostic software Two y Performing Days fault finding on the electronic control system course fee participants $ 412.50 including GST per person, per day Four with to lunch Eight provided Duration Two Days Course fee $412.50 including GST per person, per day available allison on ReQUeSt 3000 & 4000 product families maintenance The following engine training programs are COURSE no longer scheduled, OBJECTIVES but are available upon At customer the completion requestof this program, students will be able to carry out maintenance and basic troubleshooting on 3000 & 4000 Series Transmissions Allison fitted with 4th Generation electronic WT Legacy control. Allison Familiarisation Allison M6610A (R) Series Maintenance Students need to be qualified tradespersons or 3rd PaRticiPaNtS / 4th year apprentices curriculum Theory course on the fee following: $412.50 y Product including Familiarisation GST per person, per day y Basic construction y Torque converter operation & stall testing procedure y Planetary gear set & clutch operation y Hydraulic operation y Basic electrical circuit testing y Operation of the 4th Generation electronic control system y Troubleshooting of mechanical, hydraulic and electronic faults y Maintenance requirements / servicing procedures Practical Activities: y Identifying all external mechanical and electronic components y Performing a stall test & hydraulic pressure test y Using the shift selector to retrieve diagnostic information y Using Allison DOC diagnostic software y Performing fault finding on the electronic control system participants Duration Two Days Course fee $412.50 including GST per person, per day 12 /// Training Program

TRANSMISSION transmission COURSES courses ALLISON allison TRANSMISSION allison allison 6000 product diagnostic families tool (doc) maintenance course objectives COURSE Expose fleet OBJECTIVES maintenance personnel to the At skills the necessary completion to of service this program, Allison students electronic will control be able systems to carry using out maintenance DOC (Diagnostic and basic troubleshooting on 6000 Series transmissions fitted with CEC 2 electronic Optimised Connection). control target trainees Fleet Maintenance Personnel Students need to be qualified tradespersons or 3rd / 4th year apprentices curriculum curriculum Allison DOC for PC (Diagnostic Optimised Theory Connection) the following: is the essential tool for use y Documentation with both MD/HD product lines and the y Model 1000/2000/2400 identificationseries transmissions y Basic Understanding construction of the operations, specific y Torque electronic converter input/output operation functions and y Stall circuitry testing procedure y Planetary gear set & clutch operation Mandatory vehicle interface connections y Hydraulic operation System diagnostics/troubleshooting, and y Operation of the CEC2 electronic control system reprogramming selected parameters y Maintenance Navigating through requirements the tool s / servicing computer procedures screens; using the demo mode, graphics y Troubleshooting monitor, and strip of mechanical, chart options hydraulic and Accessing electronic specific faultstroubleshooting Practical manual Activities: pages within the tool y Identifying all external mechanical and electronic components PaRticiPaNtS y Using the shift selector to perform range attainment and diagnostic data extraction y Utilising Allison DOC software duration y Performing fault finding on the electronic Two control Dayssystem y participants course fee Four $ 412.5 to Eight 0 including GST per person, per day Duration Two Days available allison on ReQUeSt diagnostic tool (DOC) The following engine training programs are no COURSE longer scheduled, OBJECTIVES but are available upon customer Expose fleet request maintenance personnel to the skills necessary to service Allison lectronic control systems using DOC (Diagnostic Optimised Allison Connection). WT Legacy Allison Familiarisation TARGET Allison M6610A TRAINEES (R) Series Maintenance Fleet Maintenance Personnel PaRticiPaNtS curriculum Four y Allison to Eight DOC for PC (Diagnostic Optimised Connection) is the essential tool for use course with both fee MD/HD product lines and the $412.50 1000/2000/2400 including GST Series per transmissions person, per day with y Understanding lunch provided of the operations, specific electronic input/output functions and circuitry y Mandatory vehicle interface connections System diagnostics/troubleshooting, and reprogramming selected parameters y Navigating through the tool s computer screens; using the demo mode, graphics monitor, and strip chart options y Accessing specific troubleshooting manual pages within the tool participants Duration Two Days Course fee $412.50 including GST per person, per day Course fee $412.50 including GST per person, per day Training Program /// 13

Electronic Courses 14 /// Training Program

electronic courses detroit diesel DDEC ddec III iii & IV iv SINGLE diagnostics ECM DIAGNOSTICS course objectives Expose trades people to the skills necessary to diagnose service and repair systems COURSE OBJECTIVES To provide tradespersons with the skills necessary target to diagnose, trainees service and repair DDEC Single Operators ECM and - Engine Maintainers Control System TARGET PReReQUiSite TRAINEES Operators Basic understanding Maintainers of computer operating systems and electronic operating principles prerequisite Basic curriculum understanding of computer operating systems Operational and electronic Theory operating and Practical principles installation/application of the curriculum DDEC system y Electrical Introduction circuit to testing basic electrical principles y DDEC principles system and design wiring & schematics function y Diagnostic code evaluation Practical experience in harness repair y Detroit Diesel Diagnostic Link (DDDL) 6.XX operation Troubleshooting y Handling Correct use of documentation of diagnostic equipment y Practical DDEC troubleshooting exercises PaRticiPaNtS y Wiring harness repairs y participants Four duration to Eight Two Days Duration Two course Days fee $412.50 including GST per person, per day Course fee $412.50 including GST per person, per day ddec vi diagnostics diagnostics course objectives Provide service personnel with the skills and knowledge required to troubleshoot and COURSE OBJECTIVES repair Provide the service DDEC VI personnel electronic with control the skills system and in knowledge its ADR80/02 required Series to 60 troubleshoot applicationand repair the DDEC VI electronic control system in its target ADR80/02 trainees Series 60 application Operators and Maintainers PReReQUiSite Operators and Maintainers DDEC III and IV Familiarisation prerequisite curriculum DDEC III & IV SINGLE ECM DIAGNOSTICS System lay-out curriculum Engine controls Vehicle y DDEC interfacing system design & function EGR y Diagnostic control code evaluation y Detroit Diesel Diagnostic Link (DDDL) Data links 7.XX operation Diagnostics y Handling of documentation Wiring y Practical schematics DDEC troubleshooting exercises DDDL y Wiring 7.0 harness operation repairs PRactical practical activities activities y Identification of of components y Circuit identification and testing y Utilisation of of special tools Utilisation y Utilisation of of DDDL DDDL 7.0 7.0 PaRticiPaNtS participants Four Four to to Eight Eight duration Duration Two Days Two Days course Course fee fee $412.50 including GST per person, per day $412.50 with lunch including provided GST per person, per day ddec for for mbe Mbe 4000 4000 diagnostics diagnostics course objectives Expose COURSE trades people OBJECTIVES to the skills necessary to diagnose Provide tradespersons service and repair with the skills DDEC necessary to diagnose, service and repair DDEC system SYSTEM for MBE 4000 target trainees Service and Workshop Personnel Service and Workshop Personnel PReReQUiSite prerequisite Maintenance Course y MBE 4000 Major Repair Basic y Basic understanding understanding of of computer computer operating operating systems systems and and electronic electronic operating operating principles curriculum curriculum Operational y Electrical theory circuit and testing practical principles installation/application y DDEC system design of & the function DDEC system y Diagnostic code evaluation Introduction y Detroit Diesel to basic Diagnostic electrical Link principles (DDDL) 6.XX and wiring operation schematics y Handling of documentation Practical experience in harness repair y Practical DDEC troubleshooting exercises Troubleshooting y Wiring harness repairs Correct use of diagnostic equipment participants PaRticiPaNtS Duration duration Two Days Two Days Course fee course $412.50 fee including GST per person, per day $ 412.5 with 0 including lunch provided GST per person, per day Training Program /// 15

electronic courses MtU ECU-7 CE1/C (CONSTRUCTION & INDUSTRIAL) TEMIC CE1/C COURSE OBJECTIVES y Understand the function and design of the ECU-7 electronic control system y Utilise Diasys 2.50 to access diagnostic codes and create, save and view log files y Utilise diagnostic equipment and documentation to troubleshoot the ECU-7 system Operators and Maintainers curriculum y Introduction to the Motivline System y Design and Function of the Engine Control Unit (ECU-7) y Design and function of the Power Output Module (POM) y Engine controls y Design and function of the Service and Application Module (SAM) y Vehicle Interface y Handling of Documentation and Drawings y Design and function of diasys y Overview of parameters y Troubleshooting participants Duration Two Days Course fee $550.00 including GST per person, per day COURSE OBJECTIVES Provide tradespersons with the skills necessary to diagnose, service and repair the TEMIC engine control system fitted to Mercedes OM series engines Service and Workshop Personnel prerequisite Basic understanding of computer operating systems and electronic operating principles curriculum y Operational theory and practical installation application of the TEMIC system y Introduction to basic electrical principals and wiring schematics y Practical experience in harness repair y System troubleshooting techniques y Correct use of diagnostic equipment participants Duration Two Days Course fee $412.50 including GST per person, per day 16 /// Training Program

electronic courses MtU ce1 target target trainess trainees Operators PReReQUiSiteS prerequisites Knowledge of the main system functions Technical comprehension Good working knowledge of the language in which the course is to be held course COURSE OBJECTIVES objectives Proficiency in system function and set up Being able to operate the system curriculum curriculum Introduction of scope of electronics Handling of documentation and drawings System structure, design and operations Troubleshooting via Display Navigation SchedUle schedule To be agreed PaRticiPaNtS participants Up to eight persons location location MTU Detroit Diesel Australia Kings Park NSW course course language language English training training time time 8:00 am to 4:00 pm course course fee Upon request ce2 target target trainess trainees On-Board Maintainer prerequisites PReReQUiSiteS Mechanics or electronics technicians with system knowledge Good working knowledge of the language in which the course is to be held COURSE course OBJECTIVES objectives System maintenance Troubleshooting and corrective action Using test/measurement equipment curriculum curriculum Introduction of Scope of electronics Handling of documentation and drawings System structure, design and operations Explanation of sensors and actuators System configuration Replacing complete units Introduction of the dialog unit (basic level) Data recording and error codes Troubleshooting via Display Navigation and Dialog Unit schedule SchedUle To be agreed participants PaRticiPaNtS Up to eight persons location location MTU Detroit Diesel Australia Kings Park NSW course course language language English training training time time 8:00 am to 4:00 pm course course fee Upon request At MTU Detroit Diesel Australia we offer courses to meet both your operators (CE1) and on board maintainers (CE2) needs in the support of the MTU Electronic Engine Control Systems and MTU Engine Monitoring and Control Systems. Training for the following systems is supported from our Training Centre located in Sydney: Engine Control Systems ECS 4(MDEC) ECS 7(ADEC) ECS 8(ADEC for 1600 series) Engine Monitoring Systems Smartline BlueLine BlueVision MCS-5 (Type 1&2) We can also offer tailored courses on site to meet your requirements. Contact your MTU Detroit Diesel Australia Training Team for further information. Training Program /// 17

18 /// Training Program NoteS

19 /// Training Program NoteS

technicaltraining@mtudda.com.au mtudda.com.au 1300 MTU DETROIT 1300 688 338