Ver.1.01 IUMRS-ICAM 2017 Abstract submission and Online Registration 1 Abstract submission 1) In order to register your abstract for IUMRS-ICAM 2017, please create My Page account. 2) One e-mail address cannot be used for the creation of two 'My Page' accounts. 3) Up to two presentations are acceptable by one e-mail address. 4) Only PDF file within 10 MB can be uploaded. 5) Marked with * is compulsory to be filled in. 6) Registered information can be modified even after submitting the information. In this case, updated abstract should be submitted again. 7) Following the acceptance of your abstract, registration is required to be done. 8) Number of co-authors can be modified. Please select the number from the pull down list. If you leave unfilled co-author(s), error message appears. 2 Abstract submission for Young Scientist Award 1) One presentation per My Page can be submitted to Young Scientist Award. 2) You can add co-authors information up to five persons in one page. Even if you leave unfilled co-author(s), submission for Young Scientist Award could be completed. 3) Only PDF file can be uploaded. 3 Registration for participation (Please go to this process after the acceptance of your abstract.) 1) Button of Registration can be displayed at My Page. 2) If you press the button, information of the presenter and submission number is shown on the registration page. 3) In case of presenter, please fill your presentation number in the required column. Registration for audience starts only after presenter s registration is closed. 4) In case of selecting the fee for Member of MRS-J/IUMRS or Academic Societies in Cooperation, please input the membership number in the required column. 5) Membership fee is applied for the member of Academic Societies in Cooperation listed in the separated page. 6) Please prepare your credit card if you make credit card payment. 7) Please refrain from pressing the submission button twice after inputting the credit card information.
1 Abstract submission New abstract submission and Login screen. If you have already registered, please enter your e-mail address and password. If not, please press Create My Page. If you foget your password, please press the Password reissue button and reset the password at the page of reissuing the password. (Password reissue) Please input your registered e-mail address and press SEND. URL for reissuing the password shall be delivered to your registered e-mail address. Pleaes create a new password at the page for reissuing.
1) Creation of My Page Please proceed to the page of My Page creation. Marked with * is compulsory to be filled in. Your password has to consit of at least six characters. Only one byte character is acceptable.
After creating My Page, New Abstract Submission button appears. Plesae press this button and proceed to the abstract submission. 2) After creation of My Page Registerd informaton is shown. If you newly submit abstract, please press New Abstract Submission.
3) Abstract submission Abstract submission proceeds as Co-authors Enrollement of Award Presentation title Co-authors information
One corresponding Author and one presenter can be registered. E-mail addresses of corresponding Author and presenter must be registered correctly. 4) Award for Encouragement of Research in IUMRS-ICAM 2017 If you wish to apply for the Award, please choose Apply and your qualification.
5) Presentation information Please select one of the symposia from the list below. A-1 Perovskite solar cells and optoelectronics: Material properties to device functions A-2 Energy and environmental materials? energy storage A-3 Superconducting materials and applications A-4 Magnetic oxide thin films and hetero-structures A-5 Thermoelectric materials for sustainable development A-6 Forefront of the functional development of strongly correlated materials A-7 Design of advanced fuel cell materials, devices and systems A-8 Advanced Nano(porous) Materials and their Applications A-9 Materials for living? environment / energy / medicine - B-1 Materials frontier for transparent advanced electronics (3rd Bilateral MRS-J / E-MRS symposium) B-2 Advanced thin film materials for future electron device and sensor B-3 Organic and Molecular Electronics B-4 Soft active interfaces B-5 Severe plastic deformation: innovative processes for high-performance materials B-6 Advances in functions and reliability of ceramics and glasses based on structural formation B-7 Nano-biotechnology on Interfaces C-1 Nobel Laureate Prof. SUZUKI special symposium (Carbon related Materials) C-2 Structure and physical properties of polymers in confined systems C-3 Self-organized materials and their functions C-4 Synthesis of functional materials for next generation Innovative devices application C-5 Frontier of nano-materials based on advanced plasma technologies C-6 Soft matter science and technology-revisit to unsolved problems and challenges C-7 Advances in Semiconductor Nanowires: Growth, Theory, Characterisation, Processing and Devices D-1 Innovative material technologies utilizing ion beams D-2 Eco-product session D-3 Advanced Water Science and Technology D-4 Advanced Ceramics and Composites for Energy and Sustainable Society D-5 Regenerative Medicine Based upon Functional Materials D-6 Resource Efficiency and Material Technology D-7 Smart Materials Innovations
Only PDF within 10 MB can be uploaded. You can use superscript, subscript and Italic in Paper Title. 6) Submission After completing the data input, Confirmation page appears. If you do not fill in the required columns throughly or input incorrectly, error message is displayed. Please correct the data in accordance with error message.
After submitting the data, confirmation e-mail shall be delivered to your registered e-mail address.
2 Registration for Young Scientist Awards Registeration for Young Scientist Award can be made at My Page. There is a button of Awards nomination at the bottom. 1) Rules Rules and Eligibility The nominee shall not have reached his or her 40th birthday on or before 27th August, 2017. The nominee must submit the documents [curriculum vitae (CV) including the date of birth (2-page maximum), extended abstract in accordance with the template for the award nomination (4-page maximum) and list of recent publications (2-page maximum)], which are to be announced on the web page of IUMRS-ICAM 2017. The deadline for the submission of the documents is 28th February, 2017. Extended abstract template: YSA_IUMRS-ICAM2017_Template.docx At the timing of the submission of the documents for the award, the nominee must have completed abstract submission as a presenter in the symposia of IUMRS-ICAM 2017. The title of the extended abstract for the award nomination should not be the same as the title(s) of the abstract(s) submitted for presentation(s) in the symposia. The documents submitted by the nominees are to be reviewed by referees. The referees will select eligible candidates as finalists, who shall be asked to participate in the "Finalist Session for Young Scientist Awards", which is to be held on 28th August, 2017, and deliver their presentations under the title of the extended abstract submitted as one of the documents for the award nomination. It is noted that the finalist must have completed the registration process of IUMRS-ICAM 2017 before his or her presentation in the Finalist Session. The award winners will be selected from the finalists based on both the pre-evaluation of the documents submitted by the nominees and the evaluation of the presentations in the "Finalist Session for Young Scientist Awards." The award winners will be announced in the award ceremony to be held during the banquet on 30th August, 2017. After the award ceremony, a group photo of the award winners will be taken. The photographs will be uploaded onto the homepage of the conference. The above rules and procedures may be subject to be modified by the organizing committee of IUMRS-ICAM 2017. Please confirm the rules above and press the bottun of I agree, then proceed to the registration page.
Information registered at My Page is shown on this page.
You can add co-authors information up to five persons in one page. Even if no information is added, submission is done.
Please upload the required files. Only PDF file is acceptable. Birthday must be inputted correctly. After inputting the information, press Confirmation and proceed to the confirmation page. If there are no mistakes, please press Submit button for completing the registraton. If you wish to modify the registered information, you can do so at My Page.
3 Registration for paticipation Information registered at My Page is shown on this page.
If you select Member of MRS-J/IUMRS or Academic Societies in Cooperation, please input your membership number of MRS-J or IUMRS. For Academic Societies in Cooperation, please refer to the separated list. If you need visa support, please check the item of Request. Kinki Nippon Tourist Co., Ltd. shall contact you later. You can choose payment ways: bank transfer, credit card, payment onsite by cash and onsite by credit card. If you make payment onsite, Early Bird fee is not applicable.
Academic Societies in Cooperation List Architectural Institute of Japan The Engineering Academy of Japan The Institute of Electrical Engineers of Japan The Institute of Electronics, Information and Communication Engineers The Iron and Steel Institute of Japan Japanese Liquid Crystal Society The Japanese Association for Crystal Growth (JACG) The Japan Institute of Light Metals The Japan Institute of Metals Japan Oil Chemists' Society The Japan Society for Technology of Plasticity The Japan Society of Applied Physics Japan Society of Civil Engineers The Japan Society of Mechanical Engineers Japan Society of Powder and Powder Metallurgy The Magnetics Society of Japan The Mining and Materials Processing Institute of Japan The Physical Society of Japan The Society of Chemical Engineers, Japan The Society of Fiber Science and Technology, Japan The Society of Materials Science, Japan The Society of Non-Traditional Technology: Ecomaterials Forum The Society of Polymer Science, Japan The Society of Powder Technology, Japan The Society of Rubber Industry, Japan The Surface Finishing Society of Japan Japan Analytical Instruments Manufacturers' Association The Rare Earth Society of Japan The Solid State Ionics Society of Japan The Society of Inorganic Materials, Japan The Technical Association of Refractories, Japan The Plasmonics Forum of Japan Plasmonic Photochemistry Society of Japan National Institute for Material Science Japan Society of Material Cycles and Waste Management Japanese Society of Biotribology The Ceramic Society of Japan The Electrochemical Society of Japan
If there are no mistakes, please proceed to the confirmation page. After you input all the information, confirmation page shall be displayed.
Please print out this barcode page and take it with you to the reception at the conference. If you select credit card payment, you can move onto the credit card payment page. Pleae prepare your credit card and proceed to the next page.
Only VISA card and Master card are acceptable. Other credit cards such as JCB or Amex can not be used. Card number, validity and security code should be inputted. Please refrain from pressing the submission button twice after inputting your credit card information. On settlement, confirmation is displayed. Transmission success
Red error messages shall be displayed in case of : -wrong card number -wrong validity -wrong security code -ecceeding credit limit -unusable card If you retry the credit card payment, please press the button of Retry Credit Card Payment and proceed to online credit card page. You can also change to another credit card. On completing the payment, confirmation e-mail shall be delivered to the registered e-mail address.
Confirmation of registration You can check the registered information at My Page. If you complete the registration, link of Invoice No. is shown in the Registration column. Please click the link and check the registered information. Please print out this page and take it with you to the reception at the conference.
Modification of registered information and payment method can be made. Please press Editing for modification. Retry of online credit card payment can be done. If the payment completed, Paid can be displayed in the Payment column. If not, No Paid is displayed in the Payment column.