CITY OF REDLANDS PLANT MECHANIC I PLANT MECHANIC II DEFINITION Under general supervision (Plant Mechanic I), or direction (Plant Mechanic II) to perform a variety of skilled work related to water and wastewater plant and equipment including wells, pumps, and electrical motors; and to perform welding and fabrication work as necessary. DISTINGUISHING CHARACTERISTICS Plant Mechanic I--This is the entry level in the class series. Positions at this level usually perform most of the duties required of the positions at the II level, but are not expected to function at the same skill level and usually exercise less independent discretion and judgement in matters related to work procedures and methods. Work is usually supervised while in progress and fits an established structure or pattern. Exceptions or changes in procedures are explained in detail as they arise. Since this class is often used as a training class, employees may have only limited or no directly related work experience. Plant Mechanic II--This is the full journey level in the class series. Positions at this level are distinguished from the I level by the performance of the full range of duties as assigned, working independently and exercising judgement and initiative. Positions at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. Positions in this class series are flexibly staffed and positions at the II level are normally filled by advancement from the I level requiring three years of experience and successful performance. When filled from the outside, the employee is required to have prior related experience which allows the employee to meet the qualification standards for the II level. SUPERVISION EXERCISED Plant Mechanic I May exercise technical and functional supervision over lower level, seasonal, and temporary staff. Plant Mechanic II Exercises technical and functional supervision over lower level, seasonal, and temporary staff. 343
EXAMPLES OF IMPORTANT AND ESSENTIAL DUTIES Participate in the operation, maintenance, and repair of the City s wastewater and water plants including lift stations, pump station, conveyance and distribution lines, and related equipment and facilities. Maintain, install, inspect, modify, and replace electrical systems and equipment related to water and wastewater treatment and municipal facilities including lighting systems, engines, pumps, and other high voltage power and utility related systems. Investigate complaints and reports of electrical malfunctions; adjust, repair, or remove defective equipment; make field repairs of damaged equipment. Develop and perform a regular inspection schedule of equipment and machinery; troubleshoot electrical and mechanical problems and determine the extent of necessary repairs; make repairs as appropriate. Perform electric and oxy-acetylene welding in the fabricating and repair of equipment, structures, pipes, tools, and other related parts; design, lay out, and fabricate equipment parts; rebuild broken equipment and parts as necessary. Perform major overhaul work on engines. Start and stop gas and electric wells and boosters and check for engine shut down safety; adjust well and booster output. Perform preventive maintenance tasks on plants, equipment, and machinery. Operate heavy equipment including tractors and crane trucks. Assist other utility personnel in the performance of emergency duties as necessary. Maintain accurate records and logs; order supplies, parts, and materials; pick up parts as necessary. May provide lead supervision; train less experience personnel as necessary. OTHER JOB RELATED DUTIES Perform related duties and responsibilities as assigned. 344
JOB RELATED AND ESSENTIAL QUALIFICATIONS Knowledge of: Plant Mechanic I Basic principles, theory, and standard practices of several maintenance trades as they apply to maintenance and repair of plant structures, machinery, equipment, and grounds. Repair and preventive maintenance techniques and procedures. Basic materials, methods, practices and equipment used in maintenance and repair work in several trades. Occupational hazards and standard safety precautions necessary in the work. Principles and procedures of record keeping and reporting. Safe driving principles and practices. Skill to: Learn to operate a variety of vehicular and stationary mechanical equipment in a safe and effective manner in routine situations. Operate a variety of maintenance and repair tools and equipment in a safe and effective manner. Operate a motor vehicle safely. Skill to: Perform heavy manual labor for extended periods of time in all types of weather. Learn and correctly interpret and apply the policies, procedures, laws, and regulations pertaining to assigned programs and functions. Learn to perform responsible mechanical maintenance and repair work with accuracy and minimal supervision. Troubleshoot mechanical problems. 345
Select and maintain machinery and equipment used in the plant maintenance, repair, and replacement program. Prepare and maintain records. Read, interpret, and apply a wide variety of technical information from manuals, drawings, specifications, layouts, blueprints, and schematics. Exercise good judgment, flexibility, creativity, and sensitivity in response to changing situations and needs. Communicate clearly and concisely, both orally and in writing. Establish, maintain and foster positive and harmonious working relationships with those contacted in the course of work. Experience and Training Guidelines: Any combination equivalent to experience and training that would provide the required knowledge, skills, and abilities would be qualifying. A typical way to obtain the knowledge, skills, and abilities would be: Experience: Two years of experience in the maintenance and repair of facilities, structures, and equipment. Training: Equivalent to a high school diploma supplemented by specialized training in the maintenance of utility facilities and equipment. License or Certificate: Possession of, or ability to obtain within one year, California Water Environment Association Plant Maintenance Technologist Grade I Certification. Possession of, or ability to obtain within six months of hire, a valid Class B driver's license. Special Requirements: Essential duties require the following physical skills and work environment: 346
Special Requirements: Ability to sit, stand, walk, kneel, crouch, stoop, squat, crawl, twist, climb, and lift 60 lbs.; exposure to heat, noise, outdoors, vibration, confining work space, chemicals, explosive materials, mechanical hazards, and electrical hazards; ability to travel to different sites. Plant Mechanic II In addition to the qualifications for Plant Mechanic I: Knowledge of: Principles, theory, and standard practices of several maintenance trades as they apply to maintenance and repair of plant structures, machinery, equipment, and grounds. Materials, methods, practices and equipment used in plant maintenance and repair work in several trades. Types and level of maintenance and repair activities generally performed in repair and maintenance of water and wastewater structures, machinery, equipment, and grounds. Pertinent Federal, State, and local codes. Skill to: Operate a variety of vehicular and stationary mechanical equipment in a safe and effective manner in routine situations. Interpret and apply the policies, procedures, laws, and regulations pertaining to assigned programs and functions. Perform responsible mechanical maintenance and repair work with accuracy and minimal supervision. Troubleshoot a variety of complex mechanical maintenance problems. Apply principles of logic to define and solve complex problems. Accurately determine project material needs and recommend purchases. 347
Independently perform the most difficult maintenance and repair duties in the area of work assigned. Experience and Training Guidelines: Any combination equivalent to experience and training that would provide the required knowledge, skills, and abilities would be qualifying. A typical way to obtain the knowledge, skills, and abilities would be: Experience: Three years of experience as a Plant Mechanic I. Training: Equivalent to a high school diploma supplemented by specialized training in the maintenance of utility facilities and equipment. License or Certificate: Possession of, California Water Environment Association Plant Maintenance Technologist Grade I Certification. Possession of a valid Class B driver's license. Special Requirements: Essential duties require the following physical skills and work environment: Ability to sit, stand, walk, kneel, crouch, stoop, squat, crawl, twist, climb, and lift 60 lbs.; exposure to heat, noise, outdoors, vibration, confining work space, chemicals, explosive materials, mechanical hazards, and electrical hazards; ability to travel to different sites. Effective Date: September, 1999 348