COMPLIANCE WITH THIS PUBLICATION IS MANDATORY

Transcription

1 BY ORDER OF THE SECRETARY OF THE AIR FORCE AIR FORCE INSTRUCTION SEPTEMBER 2014 AIR FORCE MATERIAL COMMAND Supplement 30 OCTOBER 2014 Standardization MATERIEL STANDARDIZATION COMPLIANCE WITH THIS PUBLICATION IS MANDATORY ACCESSIBILITY: This publication is available on the e-publishing website at Publishing.af.mil for downloading or ordering. RELEASABILITY: There are no releaseability restrictions on this publication OPR: SAF/AQRE Supersedes: AFI60-101, 23 October 2006 (AFMC) OPR: HQ AFMC/ENS Certified by: SAF/AQR (Dr. David E. Walker) Pages: 29 Certified by: HQ AFMC/ENS (GS-15, Darrell Phillipson) Pages:7 This publication implements AF Policy Directive (AFPD) 60-1, Air Force Standardization Program. This instruction establishes the management structure and responsibilities for conducting the Air Force portion of the Defense Standardization Program defined by DoDM , Defense Standardization Program (DSP) Procedures. It also establishes guidance and responsibilities for the materiel portion of the International Military Standardization (IMS) Program defined by DoD Instruction (DoDI) , Materiel Interoperability and Standardization with Allies and Coalition Partners. It applies to all Air Force organizations including the Air National Guard (ANG) and Air Force Reserve Command (AFRC). Refer recommended changes and questions about this publication to the Office of Primary Responsibility (OPR) using the AF Form 847, Recommendation for Change of Publication; route AF Form 847 from the field through the appropriate functional chain of command. Ensure that all records created as a result of processes prescribed in this publication are maintained in accordance with Air Force Manual (AFMAN) , Management of Records, and disposed of in accordance with the Air Force Records Disposition Schedule (RDS) located in the Air Force

2 2 AFI60-101_AFMCSUP 30 OCTOBER 2014 Records Information Management System (AFRIMS). Field activities must send implementing publications to the higher headquarters functional OPR for review and coordination before publishing. The authorities to waive wing/unit level requirements in this publication are identified with a Tier ( T-0, T-1, T-2, T-3 ) number following the compliance statement. See AFI , Publications and Forms Management, Table 1.1 for a description of the authorities associated with the Tier numbers. Submit requests for waivers through the chain of command to the appropriate Tier waiver approval authority, or alternately, to the Publication Office of Primary Responsibility (OPR) for non-tiered compliance items. (AFMC) This supplement is applicable to US Air Force Reserve units and personnel tenant on AFMC Installations. Ensure that all records created as a result of processes prescribed in this publication are maintained IAW Air Force Manual (AFMAN) , Management of Records, and disposed of IAW the Air Force Records Information Management System (AFRIMS) Records Disposition Schedule (RDS). This publication may be supplemented at any level, but all direct Supplements must be routed to the OPR of this publication for coordination prior to certification and approval. The authorities to waive wing/unit level requirements in this publication are identified with a Tier ( T-0, T-1, T-2, or T-3 ) number following the compliance statement. See AFI , Publications and Forms Management, Table 1.1 for a description of the authorities associated with the Tier numbers. Submit requests for waivers through the chain of command to the appropriate Tier waiver approval authority, or alternately, to the Publication Office of Primary Responsibility (OPR) for non-tiered compliance items. This document is a new supplement to Air Force-level policy. It aligns its guidance with Air Force Instruction , 30 September 2014, Materiel Standardization. It must be reviewed in its entirety. SUMMARY OF CHANGES This revision incorporates revised DoDM ; removed Chapters 1 and 4 in their entirety; reemphasized DoD guidance on use of non-government and DoD standards in materiel life cycle management; organizational/fact-of-life changes; allocates Lead Agent OPR responsibilities for materiel International Standardization Agreements; recognizes new Departmental Standardization Activity function; identifies Tiered waiver approval authorities for unit level compliance items; responsibility changes for Standardization Management Executives/Center Standardization Executives to approve vice certify certain document actions; clarifies Attachment 2 procedural guidance on waivers and reinstating canceled documents; and expands Attachment 2 guidance to include approval of need for a new Defense standard. Chapter 1 AIR FORCE STANDARDIZATION MANAGEMENT STRUCTURE OVERVIEW Overview (AFMC) Introduction Figure 1.1. Air Force Implementation of DSP Standardization Management Structure Figure 1.1. (AFMC) AFMC Functional Implementation of Air Force Defense Standardization Program (DSP) Standardization Management Structure... 7

3 AFI60-101_AFMCSUP 30 OCTOBER Defense Standardization Council (DSC) Defense Standardization Program Office (DSPO) Departmental Standardization Office (DepSO) Departmental Standardization Activity (DSA) Command Standardization Office (ComSO) Standardization Management Activity (SMA) Chapter 2 RESPONSIBILITIES AND AUTHORITIES 9 Figure The Deputy Assistant Secretary Science, Technology and Engineering), SAF/AQR The Engineering Management Division, Deputy Assistant Secretary (Science, Technology and Engineering), SAF/AQRE The Regional Plans and Issues Division, Directorate of Operational Plans and Joint Matters, Deputy Chief of Staff for Air and Space Operations, AF/A5XX The Chief of Information Dominance and Chief Information Officer, Office of the Secretary of the Air Force, SAF/CIO A The Armaments Cooperation Division, Director of Policy, Deputy Under Secretary of the Air Force, International Affairs, SAF/IAPQ Program Executive Officers (PEO) and Program Managers (PM) MAJCOMs and Field Operating Agencies (FOA) (AFMC) Organizational Implementation (Added-AFMC) AFMC Organizational Implementation of Air Force DSP Standardization Management Structure MAJCOM ComSOs SMEs/CSEs SMAs SMAs (AFMC) SMAs International Military Standardization (IMS) Participants Chapter 3 (Added-AFMC) STANDARDIZATION WORKLOAD MANAGEMENT AND REPORTING (AFMC) REO and SME Workload Reporting (AFMC) ComSO Reporting Attachment 1 GLOSSARY OF REFERENCES AND SUPPORTING INFORMATION 18

4 4 AFI60-101_AFMCSUP 30 OCTOBER 2014 Attachment 2 PROCEDURES FOR WAIVER/REINSTATEMENT OF A CANCELED DSP DOCUMENT AND APPROVAL OF NEED FOR A NEW DEFENSE STANDARD 26

5 AFI60-101_AFMCSUP 30 OCTOBER Chapter 1 AIR FORCE STANDARDIZATION MANAGEMENT STRUCTURE OVERVIEW 1.1. Overview. The Air Force structure for implementing Defense Standardization Program (DSP) standardization management is shown in Figure 1.1. The structure consists of all functions defined in DoDM , adds Air Force management responsibilities at appropriate levels, and combines the responsibilities for certain document management activities to support Air Force materiel standardization execution (AFMC)Introduction. Air Force Materiel Command (AFMC) functionally implements the Air Force structure for Defense Standardization Program (DSP) standardization management as shown in Figure 1.1. In addition to the Command Standardization Office (ComSO) and Center Standardization Executives (CSE) prescribed by AFI , the AFMC structure adds a Command Standardization Executive (ComSE), a Center Standardizaton Executive (CSE) Liaison, and separates DSP Standardization Management Activities into two functions: a Standardization Management Office (SMO) and Responsible Engineering Organizations (REO).

6 6 AFI60-101_AFMCSUP 30 OCTOBER 2014 Figure 1.1. Air Force Implementation of DSP Standardization Management Structure.

7 AFI60-101_AFMCSUP 30 OCTOBER Figure 1.1. (AFMC) AFMC Functional Implementation of Air Force Defense Standardization Program (DSP) Standardization Management Structure 1.2. Defense Standardization Council (DSC). The DSC consists of the Military Department and Defense Agency Standardization Executives and is chaired by the Defense Standardization Executive (DSE) who is usually a member of the Under Secretary of Defense (Acquisition, Technology and Logistics) staff Defense Standardization Program Office (DSPO). The DSPO resides in the Defense Logistics Agency (DLA), supports the DSE, and provides day-to-day guidance in executing the DSP Departmental Standardization Office (DepSO). The DepSO supports the Standardization Executive and provides day-to-day management of the Military Department and Agency DSP standardization activities.

8 8 AFI60-101_AFMCSUP 30 OCTOBER Departmental Standardization Activity (DSA). The DSA is an optional management activity, when designated by the DepSO, for each federal supply group (FSG), federal supply class (FSC), and Standardization Area. It may be delegated the DepSO s assignment responsibility for custodians for new full coordination documents and may assist LSAs with technical and standardization issues Command Standardization Office (ComSO). ComSO is an Air Force Major Command (MAJCOM) point of contact with the DepSO to plan, direct, advocate, and monitor DSP standardization activities within their organization (Added-AFMC) AFMC shall have a Command Standardization Executive (ComSE) Standardization Management Activity (SMA). The Air Force DepSO establishes SMAs within the Air Force. Air Force SMAs and related assignments are identified in the DoD Standardization Directory (SD-1) available in the Acquisition Streamlining and Standardization Information System (ASSIST) at SMA Composition. Air Force implementation of SMA functions in DoDM will include a Standardization Management Executive (SME), an executive-level person charged with the responsibility of providing high-level advocacy, support, and direction on standardization issues as they relate to the organization under which the SMA is assigned. The SME at an Air Force Materiel Command (AFMC) Center and at Air Force Space Command s (AFSPC) Space and Missile Systems Center (SMC) is titled a Center Standardization Executive (CSE). A SME normally has standardization management staff subordinate to the SME that is responsible for the day-to-day operations involving document management, lead/departmental standardization, and item reduction activities for that organization. This staff may be resident in a single office or may be spread across different offices under the same organizational entity (e.g. a center or agency) (AFMC) AFMC standardization management consists of two different functions; technical functions executed by multiple Centers, REOs, CSEs, and CSE Liaisons and an administrative function managed in a single AFMC Standardization Management Office (SMO). The REO is a technical content owner of its Center s DSP products. The CSE Liaison is the Action Officer (AO) for the CSE. The AFMC SMO is responsible for administration of the Document Management, Lead Standardization, & Item Reduction activities accomplished within each Center. That administration includes workflow control and technical editing.

9 AFI60-101_AFMCSUP 30 OCTOBER Chapter 2 RESPONSIBILITIES AND AUTHORITIES 2.1. The Deputy Assistant Secretary Science, Technology and Engineering), SAF/AQR. The Deputy Assistant Secretary Science, Technology and Engineering), SAF/AQR shall serve as the Air Force Standardization Executive (SE), is a member of the Defense Standardization Council (DSC), and is responsible for implementing the materiel portion of the Air Force program in accordance with the AFPD 60-1 and DoDM The Engineering Management Division, Deputy Assistant Secretary (Science, Technology and Engineering), SAF/AQRE. The Engineering Management Division, Deputy Assistant Secretary (Science, Technology and Engineering), SAF/AQRE performs the Air Force DepSO responsibilities. DepSO shall: Plan and direct the resources needed to accomplish standardization within the Air Force and to ensure DoD components provide participatory resources for those defense standardization programs assigned to the Air Force Participate in the development of defense standardization policies Develop and implement Air Force policies and procedures required for those portions of the DSP assigned to the Air Force Assign standardization responsibilities within the Air Force including establishment of Air Force SMAs and allocate available resources Review and process actions for the Air Force SE that require approval to reinstate a cancelled DSP document (see Attachment 2, Table A2.1) or that request approval of need for a new defense standard Facilitate and coordinate participation of Air Force representatives on national and international standardization bodies Approve/disapprove requests to include qualification requirements in new defense specifications and to add qualification in existing defense specifications Coordinate with the Air Force International Standardization Office (ISO) on international military standardization (IMS) activities involving materiel international standardization agreements (ISA) intended for use in Defense acquisitions. Perform Lead Agent Office of Primary Responsibility (OPR) responsibilities 2.e.(2) through (4) assigned by Enclosure 8, DoDM relating to US implementing documents for materiel ISAs. (See AFI , International Military Standardization (IMS) Program) Represent the Air Force as required on Service, Defense, interagency, national, or international committees regarding standardization matters The Regional Plans and Issues Division, Directorate of Operational Plans and Joint Matters, Deputy Chief of Staff for Air and Space Operations, AF/A5XX. The Regional Plans and Issues Division, Directorate of Operational Plans and Joint Matters, Deputy Chief of Staff for Air and Space Operations, AF/A5XX is the Air Force International

10 10 AFI60-101_AFMCSUP 30 OCTOBER 2014 Standardization Office (ISO) and shall manage the IMS program as the Air Force Lead Agent OPR. (See AFI ) 2.4. The Chief of Information Dominance and Chief Information Officer, Office of the Secretary of the Air Force, SAF/CIO A6. The Chief of Information Dominance and Chief Information Officer, Office of the Secretary of the Air Force, SAF/CIO A6 in coordination with SAF/AQ, shall establish and maintain the technical standards, protocols, technical guidelines, reference architecture, and implementation constraints for the desired future state of the Air Force Global Information Grid (AF-GIG) infrastructure and services, in accordance with AFPD 33-1, Cyberspace Support and AFPD 33-4, Information Technology Governance The Armaments Cooperation Division, Director of Policy, Deputy Under Secretary of the Air Force, International Affairs, SAF/IAPQ. The Armaments Cooperation Division, Director of Policy, Deputy Under Secretary of the Air Force, International Affairs, SAF/IAPQ shall administer the Foreign Comparative Test (FCT) program IAW AFI , U.S. Air Force Participation in International Armaments Cooperation Programs, to reduce duplication in R&D, enhance standardization and interoperability, improve cooperative support, and promote competition and international technology exchange Program Executive Officers (PEO) and Program Managers (PM). Program Executive Officers (PEO) and Program Managers (PM) shall ensure that materiel standardization is addressed in the acquisition process as prescribed herein, in DoDM , and in AFI /20-101, Integrated Life Cycle Management MAJCOMs and Field Operating Agencies (FOA). MAJCOMs and Field Operating Agencies (FOA) shall: 2.7. (AFMC)Organizational Implementation. Figure 2 identifies the AFMC organizations responsible for implementing the AF DSP standardization management functions shown in Figure 1.1. and described in paragraphs as supplemented below.

11 AFI60-101_AFMCSUP 30 OCTOBER Figure 2.1. (Added-AFMC) AFMC Organizational Implementation of Air Force DSP Standardization Management Structure Participate in and support the Air Force and Defense Standardization Programs as required. (T-0) (Added-AFMC) HQ AFMC Director of Engineering & Technical Management (EN) is the ComSE and is responsible for AFMC Command level leadership of the DSP within AFMC Staff a ComSO (MAJCOMs only), as requested, to plan, direct, advocate, and monitor standardization management responsibilities. (T-1) (AFMC) HQ AFMC Systems Engineering Division (ENS) is designated the ComSO and is responsible for the development of AFMC standardization management policies and processes, and reports to the ComSE (Added-AFMC) HQ AFMC/ENS shall prepare, maintain, and interpret an Inspector General (IG) Checklist for DSP and provide inspection support to the HQ AFMC/IG for consistent compliance with AFMC DSP policies and procedures Assign the CSE or SME as applicable and resource the assigned SMAs. (T-2) (AFMC) The ComSE shall formally designate, by name, a CSE for each AFMC Center. The CSE is normally the Center Senior Functional for Engineering, or as delegated. (T-2) Recommend standardization needs and improvements. (T-3).

12 12 AFI60-101_AFMCSUP 30 OCTOBER Recommend needed policies or procedures or the establishment of new or discontinuance of existing Standardization Areas. (T-3) Work with Air Force standardization document Custodians under command or agency auspices in resolving essential comments. (T-3) Recommend or endorse establishment of SMAs for organizations under the auspices of their command or agency. (T-3) Identify the applicable SMEs for those SMAs under the auspices of that command or agency, and provide those names to the Air Force DepSO. (T-2) Ensure necessary command or agency planning, programming and budgeting activities are accomplished in support of DoD and Air Force standardization policy implementation. (T-2) Ensure appropriate standards and agreements (Air Force, defense, government, national and international) are implemented. (T-1) 2.8. MAJCOM ComSOs. MAJCOM ComSOs, where designated, will: Accomplish the responsibilities assigned to their MAJCOM in paragraphs Provide Command positions on DSP and Air Force standardization policies, procedures, and guidance to AF DepSO Submit standardization issues that require higher DoD-wide consideration to Air Force DepSO Implement decisions of the DSC, as promulgated by the Air Force DepSO Provide day-to-day support to customers inside and outside the MAJCOM regarding standardization questions, issues and concerns SMEs/CSEs. SMEs/CSEs shall: Provide management-level advocacy and support for the SMA, and ensure the SMA pursues actions toward effective implementation of DSP and general standardization policies and procedures Represent standardization issues as part of overall functional management responsibilities Maintain visibility over their organization s standardization process to ensure the appropriate infrastructure exists to perform the associated functions effectively (Added-AFMC) The CSE is responsible for identification and assignment of REOs for the creation, review, maintenance, and update of standardization documents assigned to the Center, and to provide engineering analysis required for DMA, LSA, DSA, and IRA functions. In addition, the CSE is responsible for standardization document currency as defined in Chapter 3 and for metrics reporting to the ComSE (Added-AFMC) REOs and Subject Matter Experts (SME) will respond to both their CSE and the AFMC SMO (see Figure 2). Center-Level Agreements (CLAs) may be created to facilitate this activity.

13 AFI60-101_AFMCSUP 30 OCTOBER (Added-AFMC) CSEs will appoint a CSE Liaison for their Center. The CSE Liaisons will support all AFMC SMO taskings to their respective Centers. The CSE Liaisons will act as the AO for the CSEs on policies, special initiatives, and performance metrics reporting. In addition, CSE Liaisons will ensure DSP documents under their purview have assigned REOs and SMEs Approve those decisions that reflect an Air Force or DoD-wide position to include: Approval of need for defense performance and detail specifications prepared by that organization Validation of need to prepare a new defense standard Endorsement of any standardization decision reached by the organization SMA that represents a formal position Approval of organization representatives proposed for serving on national and international standardization bodies SMAs. SMAs shall work to meet the objectives of the DSP as defined in DoDM , through the following actions: Identifying the needs and opportunities for developing or using the hardware, software, processes, practices, and procedures to provide the most efficient use of resources Enhancing the compatibility, interoperability, interchangeability, and commonality of practices, systems, equipment, and supplies, as applicable, within the Air Force and between the Military Departments, Defense Agencies, US allies and other friendly nations Ensure standardization requirements are documented in performance-related terms to the maximum extent practicable, so as to permit optimal use of available commercial products, practices and processes, aid rapid technology insertion, and integrate defense and commercial industrial bases Provide support for both policy and work-related issues when requested by the DepSO and the respective ComSO, where applicable Represent, as appropriate, the Air Force in IMS activities. Provide technical and administrative support, when requested by the Air Force International Standardization Office (ISO) or DepSO SMAs. SMAs shall perform the following functions, in addition to responsibilities identified in paragraph 2.10: (AFMC)SMAs. AFLCMC will staff and operate the AFMC SMO. The AFMC SMO will directly task REOs and SMEs, regardless of Center or geographic location, to accomplish the technical efforts. These tasks include development of new DSP artifacts and maintenance of existing artifacts, whether prepared by the REO and SME, other AF, or another Service/Agency. These artifacts include military, non-government, and international documents and data stored in online sources Document Management Activities (DMA) shall manage and coordinate standardization efforts to ensure the optimal degree of standardization in their activity and to prepare, adopt, coordinate, and review standardization documents.

14 14 AFI60-101_AFMCSUP 30 OCTOBER Preparing Activities (PA) are the DoD office of primary responsibility (OPR) for developing and maintaining assigned standardization documents. The specific duties for a PA are defined in DoDM In addition, PAs shall accomplish the actions defined in Attachment 2 for waivers/reinstatements of cancelled documents and for requesting approval of need for new defense standards Custodians are the Air Force OPR for a standardization document or study for a specific standardization document. Custodians work with Preparing Activities, Adopting Activities, Military Coordinating Activities and IMS members to integrate and harmonize defense standardization needs. In addition to the procedures outlined in DoDM and AFI , The United States Air Force International Military Standardization Program, Air Force Custodians shall: Maintain awareness of the current state of products, processes, or procedures of interest to ensure that associated standardization actions are consistent with that state Work with command and field operating agencies to identify those Review Activities that are needed to help determine and define standardization needs and opportunities Review Activities have a technical or procurement interest in a standardization document, thus requiring a review of all proposed actions affecting it Adopting Activities are the DoD technical OPR and supervise service and agency participation in non-government standardization efforts. The specific duties for an Adopting Activity are defined in DoDM Military Coordinating Activities (MCA) are the DoD technical OPRs and supervise service and agency participation in US government (non-defense) standardization efforts, including the preparation of commercial item descriptions (CIDs). This responsibility becomes an additional duty of Air Force Custodians. The specific duties for an MCA are defined in DoDM Lead Standardization Activities (LSA) manage DSP activity for assigned Federal Supply Classes (FSCs), Federal Supply Groups (FSGs), and Standardization Areas by acting in a DoD-led capacity to plan, organize, and coordinate service and agency efforts for DoD. Specific duties are identified in DoDM In addition, Air Force LSAs shall perform the following duties: Manage standardization efforts within the Air Force to ensure an optimal degree of standardization across the assigned area in support of the objectives in AFPD Establish working groups, integrated product teams (IPTs), or process action teams (PATs), as appropriate, to conduct standardization business Identify and establish interfaces and work with PEOs, PMs, MAJCOMs, and FOAs to determine and provide for Air Force standardization needs Perform the necessary planning activities to ensure effective execution of SMA activities within the area, including defining standardization opportunities and needs and

15 AFI60-101_AFMCSUP 30 OCTOBER providing assessments and strategies for achieving the most efficient use of resources for a specified FSC, FSG, or Standardization Area Work with public and private sector entities and organizations to harmonize global standardization requirements Work with other service Departmental Standardization Activities (DSA) to determine and harmonize DoD-wide requirements as part of the DSP planning effort for the associated FSC, FSG, or Standardization Area Ensure the inclusion of Air Force requirements and positions in government, national and international standardization efforts, as appropriate Work with industry and non-government standardization organizations to promote military and commercial sector industrial and technology base integration through the definition and development of standardization opportunities, products, and processes that can be used nationally Support, as appropriate, non-government standards activities, industrygovernment partnerships and U.S. consortium efforts to develop national and international standards Serve as the Air Force-wide focal point for general questions pertaining to the assigned area and provide related assistance as required Maintain awareness of standardization needs and activities in the Air Force Assist Air Force SMAs in identifying various standardization options consistent with the overall business strategy for their assigned FSC, FSG, or Area Help Preparing Activities identify standardization document Custodians for the Air Force Help identify Air Force personnel to serve on non-government standards body (NGSB) technical committees or non-government standards (NGS) Adopting Activities Work with the Air Force DepSO through the applicable Command channels to participate in international military standardization programs to define, develop, and use common doctrine, materiel, products, processes, and procedures Departmental Standardization Activities (DSA), when designated by the DepSO for an FSG, FSC, or Standardization Area, assist LSAs with technical and standardization issues and PAs by designating Custodians and identifying Review Activities Item Reduction Activities (IRA) are responsible for reviewing FSCs or item name codes for reducing, to the highest degree practicable, the number of sizes and kinds of items that are generally similar. Their specific duties are defined in DoDM and SD (AFMC) The AFMC Item Reduction Activity (IRA) will be responsible for generating and coordinating Item Reduction Studies requested by AF REOs and SMEs and for AF review of Item Reduction Studies initiated by other Services/Agencies. The AFMC IRA is the AFMC Custodian for other Service/Agency generated studies and will ensure item reduction studies are submitted to CSE Liaisons at using locations for their review. The CSE Liaison will directly task REOs and SMEs to accomplish engineering reviews on items

16 16 AFI60-101_AFMCSUP 30 OCTOBER 2014 which are coded critical, critical application, or critical safety. The REOs and SMEs will provide responses for assigned item reduction reviews to the CSE Liaison who will forward response to the AFMC Custodian. The AFMC Custodian will provide coordinated AF response to the originating IRA. The AFMC IRA/Custodian will coordinate with REOs and SMEs on items for which there is disagreement amongst AF users, or between AF and other Service/Agency users International Military Standardization (IMS) Participants. The primary participants in IMS activities for which Air Force is the Lead Agent are identified below. (See AFI for responsibilities.) Head of Delegation (HoD) shall serve as the US OPR and supervise US participation in a North Atlantic Treaty Organization (NATO) Military Committee Standardization Board (MCSB), NATO Petroleum Committee (NPC), and NATO Air Traffic Management Committee (NATMC) Working Group (WG) or panel, and an Air and Space Interoperability Council (ASIC) WG Member of the Delegation shall serve as the technical assistant or advisor to a NATO or ASIC HoD, or as an Air Force representative to an IMS body for which another Military Department or Office of the Secretary of Defense (OSD)/Joint Chiefs of Staff (JCS) office is the Lead Agent.

17 AFI60-101_AFMCSUP 30 OCTOBER Chapter 3 (Added-AFMC) STANDARDIZATION WORKLOAD MANAGEMENT AND REPORTING 3.1. (AFMC) REO and SME Workload Reporting. REO and SME workload assignment information and performance metrics will be provided by the AFMC SMO via a common, Internet-based collaboration and management tool. CSE Liaisons will verify the accuracy of REO and SME appointments, project activities and metrics in the common tool and submit to their CSE and to the ComSO (AFMC) ComSO Reporting. ComSO will present workload and metrics information to the ComSE and AFMC Engineering Council (EC) at regularly scheduled meetings. WILLIAM A. LAPLANTE Assistant Secretary of the Air Force (Acquisition) (AFMC) SUSAN J. THORNTON, SES Director of Engineering & Technical Management

18 18 AFI60-101_AFMCSUP 30 OCTOBER 2014 References Attachment 1 GLOSSARY OF REFERENCES AND SUPPORTING INFORMATION DoDD , The Defense Acquisition System, 12 May 2003 DoDI , Materiel Interoperability and Standardization with Allies and Coalition Partners, 29 July 2009 DoDM , Defense Standardization Program (DSP) Procedures, 24 September 2014 JP 1-02, The Department of Defense Dictionary of Military and Associated Terms, 8 November 2010 (as amended through 14 July 2014) (Added-AFMC) AFI60-101, Materiel Standardization, 30 September 2014 AFPD 33-1, Cyberspace Support, 9 August 2012 AFPD 33-4, Information Technology Governance, 17 January 2013 AFPD 60-1, Air Force Standardization Program, 29 September 29, 2014 AFI , U.S. Air Force Participation in International Armaments Cooperation Programs, 13 May 2013 AFI , Publications and Forms Management, 25 September 2013 AFI , International Military Standardization (IMS) Program, 30 September 2014 AFI /20-101, Integrated Life Cycle Management, 7 March 2013 AFMAN , Management of Records, 1 March 2008 SD-1, Standardization Directory, 1 July 2014 Adopted Forms AF Form 847, Recommendation for Change of Publication Abbreviations and Acronyms ACG Aerospace Capability Group (Added-AFMC) AFLCMC Air Force Life Cycle Management Center AFMC Air Force Materiel Command (Added-AFMC) AFNWC Air Force Nuclear Weapons Center (Added-AFMC) AFRL Air Force Research Laboratory (Added-AFMC) AFSC Air Force Sustainment Center (Added-AFMC) AFTC Air Force Test Center (Added-AFMC) AO Action Officer ASIC Air and Space Interoperability Council ASSIST Acquisition Streamlining and Standardization Information System

19 AFI60-101_AFMCSUP 30 OCTOBER BCA Business Case Analysis CID Commercial Item Description (Added-AFMC) CLA Center Level Agreement CM Coordinating Member (Added-AFMC) ComSE Command Standardization Executive ComSO Command Standardization Office CSE Center Standardization Executive DepSO Departmental Standardization Office DISR DoD Information Technology Standards Registry DMA Document Management Activity DoD Department of Defense DSA Departmental Standardization Activity DSE Defense Standardization Executive DSP Defense Standardization Program DSPO Defense Standardization Program Office (Added-AFMC) EC Engineering Council FAR Federal Acquisition Regulation FCT Foreign Comparative Test FOA Field Operating Agency FSC Federal Supply Class FSG Federal Supply Group HOD Head of Delegation HQ USAF Headquarters US Air Force (Added-AFMC) IG Inspector General IMS International Military Standardization IPT Integrated Product Team IRA Item Reduction Activity ISA International Standardization Agreement ISO International Standardization Office IT information technology JCS Joint Chiefs of Staff LSA Lead Standardization Activity

20 20 AFI60-101_AFMCSUP 30 OCTOBER 2014 MAJCOM Major Command MCA Military Coordinating Activity MCSB Military Committee Standardization Board NAFAG NATO Air Force Armaments Group NATO North Atlantic Treaty Organization NGS non-government standard NGSB non-government standards body NIA Need-Impact Analysis OPR Office of Primary Responsibility OSD Office of the Secretary of Defense PA Preparing Activity PAT Process Action Team PEO Program Executive Officer PM Program Manager (Added-AFMC) QPD Qualified Products Database RDS Records Disposition Schedule (Added-AFMC) REO Responsible Engineering Office RSE Responsible Standardization Executive SE Standardization Executive SMA Standardization Management Activity SME Standardization Management Executive (Added-AFMC) SMO Standardization Management Office (AFMC) SME Subject Matter Expert Terms (Added-AFMC) Acquisition Streamlining and Standardization Information System (ASSIST). The ASSIST, is a database managed by the Defense Logistics Agency and is the official source for specifications and standards used by the DOD. Standardization Management Activities use the site to develop, coordinate, and manage data and documents prepared in ac (Added-AFMC) AFMC Engineering Council (EC). The EC is a HQ AFMC/EN chaired forum for awareness, information, discussion, and resolution of AFMC engineering and technical issues. Attendance includes Directors of Engineering from all AFMC Centers and a standing invitation to SAF/AQRE. (Added-AFMC) AFMC Standardization Management Office (SMO). The AFMC SMO is responsible for the consolidated Document Management Activities across all AFMC Centers.

21 AFI60-101_AFMCSUP 30 OCTOBER This office is responsible for the administrative activities for DMA, LSA and IRA functions for AFMC. AFLCMC/ENRS has been designated by the ComSE to perform these functions. Sources sources (where applicable) appear parenthetically at end of term Activity 1. A unit, organization, or installation performing a function or mission, e.g., reception center, redistribution center, naval station, naval shipyard. 2. A function, mission, action, or collection of actions. (JP 1-02) Adopting Activity The Department of Defense primary technical office of primary responsibility participating in a non-government standardization effort. Air and Space Interoperability Council (ASIC) an international organization formed in 1948 as the Air Standardization Coordinating Committee (ASCC) that works for the air forces of Australia, Canada, New Zealand, the United Kingdom and the United States of America. Its mission is to enhance current and future coalition warfighting capabilities through air and space power interoperability. Architecture A framework or structure that portrays relationships among all the elements of the subject force, system, or activity. (JP 1-02) (Added-AFMC) Center Level Agreement (CLA). The purpose of a Center Level Agreement (CLA) is to designate engineering support and workforce development roles and responsibilities between the Centers in areas in which mutual dependencies and integration points exist. A CLA is intended to reduce duplication of effort and increase efficiency in the execution of each Center s mission and plays an essential role in determining the support provided and received by each Center. (Added-AFMC) Center Standardization Executive (CSE) Liaisons. CSE Liaisons are the AO for CSEs who ensure accurate appointment of REOs and SMEs, and facilitate taskings by the AFMC SMO. Command Standardization Office (ComSO) An organization within an Air Force Major Command (MAJCOM) headquarters that provides the functional staff interface for the Air Force Standardization Program within the Command. Commercial Item Description (CID) An indexed, simplified product description managed by the General Services Administration that describes, by functional or performance characteristics, the available, acceptable commercial products that will satisfy the government's needs. Commercial Product Any item defined as commercial by FAR ( to include an item that is of a type customarily used by the general public or by non-governmental entities for other than governmental purposes, and (i) has been sold, leased, or licensed to the general public; or, (ii) has been offered for sale, lease, or license to the general public. Commonality A state achieved when groups of individuals, organizations or nations use common doctrine, procedures or equipment. (JP 1-02) Compatibility The suitability of products, processes or services for use together under specific conditions to fulfill relevant requirements without causing unacceptable interactions. (NATO AAP-06)

22 22 AFI60-101_AFMCSUP 30 OCTOBER 2014 Custodian The activity responsible for resolving and consolidating coordination comments for standardization documents or studies in its department or agency, and submitting those comments to the Preparing Activity. (DoDM ) Also, the nation, service, command, or other agency responsible for maintaining an existing international military standardization agreement or publication, or for conducting studies, organizing projects, and developing proposals for standardization. (AFI ) Defense Specification A specification developed under the consensus procedures of the Defense Standardization Program that is used on multiple programs or applications and is included in the ASSIST database. (MIL-STD-961) Departmental Standardization Activity (DSA) A SMA that may be designated by its DepSO to address technical and standardization issues under an assigned FSG, FSC, or Standardization Area for its Military Department or Defense Agency. When requested, the DSA may assist the LSA in addressing standardization issues and assist Preparing Activities by designating Custodians for a document and identifying Review Activities. Departmental Standardization Office (DepSO) A top level office in each Military Department or Defense Agency responsible for managing the Defense Standardization Program (DSP) and ensuring that its Standardization Management Activities properly implement the policies, procedures, and goals of the DSP. Document Management Activity The generic name for the group of standardization activities involved with management of documents to include Preparing Activity, Custodian, Review Activity, Adopting Activity, and Military Coordinating Activity. Federal Supply Class (FSC) A four-digit coding structure used to group products into logical families for supply management purposes. As used in the standardization program, the four-digit code is used to group standardization documents associated with products into logical families for standardization management purposes. Federal Supply Group (FSG) A two-digit coding structure used to group related FSCs under logical families for supply management purposes. The first two digits of each FSC represent the related FSG. As used in the standardization program, the two-digit code is used to group standardization documents associated with the FSCs into logical families for standardization management purposes. Head of Delegation (HoD) The head of a national delegation to a NATO or ASIC working group d who supervises and coordinates nationally all phases of the working group effort. The HoD is the national spokesperson to the working group who presents coordinated national views. The HoD ensures all interested agencies are given the opportunity to participate in the NATO or ASIC effort. (AFI ) Interchangeability A condition which exists when two or more items possess such functional and physical characteristics as to be equivalent in performance and durability, and are capable of being exchanged one for the other without alteration of the items themselves, or of adjoining items, except for adjustment, and without selection for fit and performance. (JP 1-02) International Standardization Agreement (ISA) The record of an agreement among several or all of the member nations of a multi-national organization to standardize on material and nonmaterial areas.

23 AFI60-101_AFMCSUP 30 OCTOBER Interoperability The ability of systems, units or forces to provide services to and accept services from other systems, units or forces and to use the services so exchanged to enable them to operate effectively together. (JP 1-02) Item Reduction Activity (IRA) An activity in a Military Department, a Defense Agency, or a civilian agency responsible for reviewing FSCs or item name codes for reducing, to the highest degree practicable, the number of sizes and kinds of items that are generally similar. Lead Agent (LA) The U.S. government agency designated to coordinate the interagency oversight of the day-to-day conduct of an ongoing operation. (JP 1-02) Lead Standardization Activity A management activity in a Military Department or a Defense Agency that guides Department of Defense standardization efforts for a FSC, FSG, or a Standardization Area through planning of necessary activities, authorization of standardization projects, and identification and resolution of standardization issues. (DoDM ) Materiel All items (including ships, tanks, self-propelled weapons, aircraft, etc. and related spares, repair parts, and support equipment, but excluding real property, installations, and utilities) necessary to equip, operate, maintain, and support military activities without distinction as to its application for administrative or combat purposes. (JP 1-02). In a military context, materiel relates to the specific needs of a force to complete a specific mission. The term is also used in a general sense ("men and materiel") to describe the needs of a functioning military. Materiel embraces complete systems, C3 systems, weapon-systems sub-systems, interfaces, assemblies, components, spare parts and consumables (including ammunition, fuel, supplies, stores and spares). (NATO AAP-3) Member of the Delegation Any Department of Defense representative (or consultant) who accompanies an Air and Space Interoperability Council Head of Delegation, North Atlantic Treaty Organization Head of Delegation, or principal US representative to a meeting in the capacity of technical assistant or advisor. (AFI ) Military Committee Standardization Board (MCSB) The generic name for any of the five specific standardization boards under the NATO Military Committee: Joint, Air, Land, Maritime, and Medical. Military Coordinating Activity (MCA) The Department of Defense technical office of primary responsibility participating in US government (nonmilitary) standardization efforts. (AFI ). Also, The military activity responsible for coordinating, reconciling, and consolidating military comments for the Department of Defense on a Federal standardization document prepared by a civilian agency. (DoDM ) Non-Government Standard (NGS) A standardization document developed by a private sector association, organization, or technical society that plans, develops, establishes or coordinates standards. Includes standards, specifications, handbooks, and other forms of product, process, or practice descriptions promulgated by non-government bodies. This term does not include professional standards of personal conduct, institutional codes of ethics, private standards of individual firms, or standards mandated by law. Non-Government Standards Bodies Private sector domestic or multinational organizations such as not-for-profit organizations; industry or trade associations; and professional or technical societies or institutes that plan, develop, establish, or coordinate non-government standards.

24 24 AFI60-101_AFMCSUP 30 OCTOBER 2014 Preparing Activity (PA) The Department of Defense technical office of responsibility for a specific product, technology, process, practice, or procedure. Integrates service and agency needs and harmonizes with government, industry, national and international standardization activities. This responsibility is almost always accomplished by a service or agency Custodian. Program Manager (PM) The designated individual with responsibility for and authority to accomplish program objectives for development, production, and sustainment to meet the user s operational needs. The PM shall be accountable for credible cost, schedule, and performance reporting to the Milestone Decision Authority. (DoDD ) Product Includes materials, parts, components, subassemblies, assemblies, and equipment. The term "product" also encompasses a family of products. A family of products is defined as "all products of the same classification, design, construction, material, type, and other design characteristics produced with the same production facilities, processes, and quality of material, under the same management and quality controls, but having the acceptable variety of physical and functional characteristics defined and specified in the applicable specification." Qualification A process in advance of, and independent of, an acquisition by which manufacturer's or distributor's products are examined, tested, and approved as being compliant with the requirements of its specification. Responsible Authority/Responsible Standardization Executive (RSE) The Standardization Executive of a DoD Component in which the Preparing Activity of a standardization document resides. If an Air Force organization is the PA, the Air Force SE is the responsible authority or RSE. If another military department or defense agency is the PA, their SE is the RSE. (para A2.3.2) (Added-AFMC) Responsible Engineering Office (REO). The REO is an activity assigned the engineering or technical surveillance function for a specific discipline. Within AFMC, the REO may be a designated office or SME within an office and will be tracked in a common data source and collaborative environment. Review Activity A Standardization Management Activity having a technical or procurement interest in a standardization document, thus requiring a review of all proposed actions affecting it. Specification A document prepared to support acquisition that describes the essential technical requirements for purchased materiel and the criteria for determining whether those requirements are met. (DoDM ) Standard A document that establishes uniform engineering or technical criteria, methods, processes and practices. (DoDM ) Standardization The process of developing and agreeing on (by consensus or decision) uniform engineering criteria for products, processes, practices, and methods for achieving compatibility, interoperability, interchangeability, or commonality of materiel. (DoDM ) Also, the process by which the Department of Defense achieves the closest practicable cooperation among the Services and Department of Defense agencies for the most efficient use of research, development, and production resources, and agrees to adopt on the broadest possible basis the use of: a. common or compatible operational, administrative, and logistic procedures; b. common or compatible technical procedures and criteria; c. common, compatible, or

25 AFI60-101_AFMCSUP 30 OCTOBER interchangeable supplies, components, weapons, or equipment; and d. common or compatible tactical doctrine with corresponding organizational compatibility. (JP 1-02) Standardization Areas Standardization categories for engineering technologies, disciplines, and practices that do not fall under a Federal Supply Class or a Federal Supply Group. The Standardization Directory, SD-1 identifies the Standardization Areas. (DoDM ) Standardization Directory (SD-1 A publication that identifies standardization responsibility assignments by Federal Supply Classes, Federal Supply Groups, and standardization technology and engineering areas. It also includes addresses, telephone numbers, and points-of-contact for the military offices, civilian agencies, and non-government standards bodies participating in the Defense Standardization Program. Standardization Document A generic term for a document used to standardize on an item of supply, process, procedure, method, data, practice, or engineering approach. Standardization documents include defense specifications, standards, handbooks, and bulletins; Federal specifications and standards; guide specifications; international standardization agreements, commercial item descriptions; and non-government standards. (DoDM ) Standardization Management Activity (SMA) A generic term to describe any Department of Defense activity listed in the Standardization Directory, SD-1, that functions as a Lead Standardization Activity, Preparing Activity, Participating Activity, Military Coordinating Activity, Custodian, Review Activity, Adopting Activity, or Item Reduction Activity. (DoDM ) Standardization Management Executive (SME) A senior person in an Air Force organization with an assigned SMA(s) who is responsible for management of the Air Force Standardization Program in that organization.