Commercial Lighting Program PROGRAM GUIDE. *Manitoba Hydro is a licensee of the Trademark and Official Mark.

Transcription

1 Commercial Ligting Program PROGRAM GUIDE *Manitoba Hydro is a licensee of te Trademark and Official Mark.

2 Commercial Ligting Program (CLP) PROGRAM GUIDE Table of contents Introduction...3 Renovation projects...3 New buildings & new additions to existing buildings: Interior ligting...3 New buildings & new additions to existing buildings: Exterior ligting only...3 How to participate...4 Program guidelines and policies...6 Customer eligibility...6 Project eligibility...6 Product eligibility...7 Installation requirements...8 New building ligting incentives...8 How to complete an application...10 Sample invoice...27 Appointment of representative form...28 System wattage tables...29 November 2017 Tis publication is subject to cange witout notice. Please visit ydro.mb.ca/psfb for te most current information. Commercial Ligting Program PROGRAM GUIDE November

3 Introduction Manitoba Hydro s Commercial Ligting Program (CLP) is available to Manitoba Hydro s Electrical General Service Rate customers in te commercial, industrial, and agricultural sectors. Te CLP offers financial incentives for installations of eligible energy efficient ligting systems. If you ave questions about te Commercial Ligting Program, contact your Manitoba Hydro account representative or te CLP directly: Call (innipeg) or clp@ydro.mb.ca or visit ydro.mb.ca/your_business/ ligting. Renovation projects Te CLP incentives apply to renovation projects. New buildings & new additions to existing buildings: Interior ligting Te Power Smart New Buildings Program provides tecnical guidance and financial incentives for designing, constructing, and operating new, energy efficient buildings in Manitoba. New commercial construction projects in Manitoba may be eligible for incentives and building designation troug te Power Smart New Buildings Program. For more information, contact te New Buildings Program. New buildings & new additions to existing buildings: Exterior ligting only Your new building or addition may qualify for incentives for exterior ligting troug te New Buildings Program or te Commercial Ligting Program. Commercial Ligting Program PROGRAM GUIDE November

4 How to participate All projects require review and written pre-approval by Manitoba Hydro prior to purcasing or installing new ligting or removing any existing ligting in order to be eligible for an incentive. Projects tat begin before Manitoba Hydro s written pre-approval are not eligible for incentives. 1. Determine ligting requirements Consult an electrical contractor, ligting designer, electrical code autority (suc as an electrical inspector), or your Manitoba Hydro account representative for assistance. 2. Qualify You must meet te customer eligibility criteria. 3. Download or contact Manitoba Hydro for a ligting incentive application Te ligting application, incentive calculation seets, and application appendices, can be downloaded from te CLP website. Your Manitoba Hydro account representative can assist you in completing te application and answer any questions you ave. 4. Select eligible products Te ligting product(s) you plan to purcase must be eligible for an incentive. LED screw-in lamps are eligible for incentive if te product is on te Eligible Product List (EPL), or if te product is ENERGY STAR certified and meets te program tecnical specifications guide. All oter LED products are eligible for incentive if te product is on te Eligible Product List (EPL), or on te DesignLigts Consortium (DLC) Qualified Product List and meets te program tecnical specification guide. All remaining ligting products must be on te Eligible Product List (EPL).. If not, ask your ligting supplier to submit a Product Approval Request to get te product approved, or cange to an approved product. You must meet te Product eligibility criteria. 5. Complete application Complete te ligting application tat applies to your project. Renovation: A ligting project tat upgrades an existing ligting system in a commercially billed facility. Excluding attics, boiler/electrical/mecanical rooms, crawl spaces, apartment suites, new buildings, new additions to an existing building, temporary ligting, and storage spaces. New construction exterior ligting: A ligting project tat installs energy efficient ligting to te exterior or parking area of a new building, or in a new addition to an existing building, or were no previous ligting existed. For new construction exterior ligting complete and attac Appendix F to te application. Incentives for new building exterior ligting will be calculated by Manitoba Hydro based on te Manitoba Energy Code for Buildings (MECB). Your planned project must meet te project eligibility criteria and te installation requirements. Ensure you provide all requested information on te application form, sign and date te application, and attac any relevant information and appendices. Incomplete applications will be declined. 6. Submit application to Manitoba Hydro Tis can be done by te customer or te contractor on te customer s bealf. It is te customer s responsibility to ensure tat te ligting application is received by Manitoba Hydro. All applications for pre-approval must be submitted and received by Manitoba Hydro witin 10 business days of te customer signing te application form. Please keep a copy of your ligting application form for your records. Application forms can be submitted to your Manitoba Hydro account representative or ed to clp@ydro. mb.ca. Your Manitoba Hydro account representative may conduct a pre-inspection or walk-troug of te facility to verify te existing ligting. 4 Commercial Ligting Program PROGRAM GUIDE November 2017

5 7. Make any necessary canges Contact your Manitoba Hydro account representative to modify te original application. Manitoba Hydro must pre-approve any canges to te application before te existing ligting is removed for any canges to be eligible for incentives. 8. Project pre-approval Manitoba Hydro issues written pre-approval to te customer for your ligting project. Do not start your project until written pre-approval as been received. If your project as not received written pre-approval witin 14 business day of submitting your application to Manitoba Hydro, please contact us in writing at to ensure your application as been received or at Ligting purcase and installation Purcase and install te new ligting witin one year (12 monts) of pre-approval by Manitoba Hydro. 10. Completion paperwork After your new ligting is installed and operational, and witin one year of pre-approval of your project, send your Manitoba Hydro account representative te following completion paperwork: Certificate of Inspection (witin innipeg) or Certificate of Approval (outside innipeg) Filled-out, signed, and dated completion declaration & questionnaire. Itemized invoice(s) detailing: - date of purcase (must be after application written pre-approval date from Manitoba Hydro) - vendor s name, customer s name, and install address - manufacturer name and model number of eac product (wic must matc te model number on te Eligible Product List or te Manitoba Hydro approved products on te DLC Qualified Products List) - product description - product quantities - per unit product costs and total, separate from design, labour, and taxes - labour (if applicable) All completion paperwork must be submitted to Manitoba Hydro witin 10 business days of te customer signature. Customers wo don t submit completion paperwork, or wo submit incomplete paperwork, will not be eligible for an incentive if written pre-approval was given more tan a year ago. If we ave questions at pre-approval, or close out during application period you must respond witin 14 business days or te application will be canceled. 11. Post-inspection Your Manitoba Hydro account representative will contact you and will conduct a post-inspection to confirm tat all products were installed in accordance wit te pre-approved application. Te incentive is subject to cange based on finalization of your application and all applicable paperwork. 12. Incentive processed Once all completion paperwork is received by Manitoba Hydro te incentive will be adjusted based on invoicing, inspections, final products installed, product quantities, energy savings, and all applicable paperwork. Manitoba Hydro finalizes and processes your incentive. A ceque or a credit on your Manitoba Hydro bill is issued. Commercial Ligting Program PROGRAM GUIDE November

6 Program guidelines and policies Customer eligibility To be eligible for a financial incentive, your company must: Be a Manitoba Hydro commercial customer billed at te Electrical General Service Rate; Use te ligting system in a commercial, not residential capacity; Te building must be an existing building tat as been continuously occupied and operated for a minimum of two consecutive years immediately prior to te application to tis program. New Buildings and additions do not qualify wit te exception of exterior ligting; Operate te ligting system for a minimum of 2,000 ours per year to be eligible for posted incentives. Ligting operation between 1,000 and 1,999 ours per year may qualify for prorated incentives; Own te ligting and be te end user of te ligting (i.e. not a ligting vendor, manufacturer, or installer); Keep te ligting installed, as specified on te application, for a minimum of tree years after te date of te incentive payment. Ligting fixtures must be permanently affixed te building. Temporary ligting does not qualify. All existing ligting must be removed and properly recycled. Note: If your company as received financial assistance, eiter in wole or in part, for te ligting installation from any federal, provincial, or oter Manitoba Hydro energy efficiency funding programs, it may not be eligible under tis program. Contact Manitoba Hydro for more details. If your company fails to comply wit tese terms and conditions or any oter requirement of Manitoba Hydro, ten upon notice from Manitoba Hydro, your incentive will be cancelled. If te incentive as already been paid to your company, ten you must repay Manitoba Hydro te entire amount of te incentive in a manner as required by Manitoba Hydro, and at Manitoba Hydro s sole discretion (wic may include addition of suc amount to your company s energy and/or loan account(s) wit Manitoba Hydro). Project eligibility 1. Obtain written pre-approval from Manitoba Hydro prior to removing existing ligting and ordering, purcasing, or installing new ligting to be eligible for an incentive. 2. Only use products from te Eligible Product List (EPL), DesignLigts Consortium (DLC) Qualified Product List, ENERGY STAR, or tose approved by Manitoba Hydro s ligting program engineer. All products must be new and not used. 3. Supply Manitoba Hydro wit all te required and requested information, including completing appendices and attacing required documentation. Incomplete applications will not be pre-approved. 4. All incentives are limited to 100 per cent of te actual cost of te ligting equipment paid for by te recipient of te incentives, including taxes (excluding design, labour or oter costs). Ligting equipment means te ligting tecnology or device itself, suc as te fixture, and does not extended to wiring, cables, or oter materials related to or used to install te device. Te maximum eligible incentive is 250,000 for all electrical measures included in your ligting project. If an incentive is assigned by a customer to te vendor or installer of te ligting, te incentive is limited to te actual cost of te ligting equipment to te vendor or installer (as opposed to te cost of te ligting equipment to te customer). Manitoba Hydro reserves te rigt to verify te accuracy of cost information including verification of payment of te ligting equipment, and your company, te vendor, and installer must fully cooperate to Manitoba Hydro s satisfaction, failing wic, te incentive may be cancelled. 6 Commercial Ligting Program PROGRAM GUIDE November 2017

7 5. Projects tat are not eligible for renovation incentives include newly constructed buildings (interior or exterior); additions to existing buildings; ligting installed in a previously unlit area of an existing building; residentially billed spaces; projects wit limited energy savings; projects wit rented or temporary ligting; and oter projects as determined by te program. 6. In retrofit situations were an appreciable portion of te existing ligting is inoperative, Manitoba Hydro reserves te rigt to limit ligting power density and incentives to te active portion only. 7. Manitoba Hydro calculates custom incentives using establised program baseline tecnologies wic may differ from a customer s existing system. In renovations were te customer is applying for a custom incentive. All incentives are capped at te lesser of energy savings, related prescriptive incentives, or material costs for te related tecnology. For existing and proposed ligt levels, te mean lumens of a properly maintained system may be used to determine te appropriate ligt levels. For mean lumens of eac tecnology, refer to te Lamp Ratings Tables in te Tecnical Specification Guide. Ligt meter measurements of te existing installation will not be used since tese levels are largely impacted by te age of te lamps, te regularity of fixture cleaning, etc., wic may result in ligt meter readings tat are muc lower tan tat of a properly maintained system. Customers will not receive incentives for demand reduction tat results from reducing ligt levels beyond tose recommended by te Illuminating Engineering Society (IES). 8. Manitoba Hydro reserves te rigt to: Hire an independent tird party to analyze ligting design proposal; Request a ligting project price quote; Request ligt design drawings of existing and proposed systems. Product eligibility 1. All eligible products must meet te CLP s tecnical specifications in te current online CLP Tecnical Specification Guide ere: ydro.mb.ca/your_business/ ligting/pdf/tecnical_spec_guide.pdf For LED screw-in lamps ENERGY STAR certified products may be acceptable. For all oter LED products a DLC listing may be acceptable. 2. Ligting must be new, owned by te customer (not rented, leased, etc.) approved by te Canadian Standards Association (CSA), or certified by an accredited independent organization, and must conform to CSA standards for te intended application. 3. It is te responsibility of te customer to ensure te ligting is in compliance wit appropriate industry, legal, safety, and oter standards, guidelines, or recommendations wic apply to te ligting application and use. Consult an electrical contractor or ligting designer to determine application specific ligting requirements suc as uniformity, colour temperature, ligt levels, and environmental aspects suc as ingress protection (IP), corrosion, etc. Te incentive may be revoked if any of te eligibility criteria as been violated. 4. Products intended for exterior application must be rated for satisfactory operation from -40 C to +40 C (-40 F to +104 F). 5. For eligible tecnologies and product types, view te current online Incentives seet ere: ydro.mb.ca/ your_business/ligting/pdf/incentives.pdf Commercial Ligting Program PROGRAM GUIDE November

8 Installation requirements 1. Ligting must meet te requirements of te Manitoba Electrical Code, all pertinent bylaws, be acceptable to te inspection autorities tat ave jurisdiction, and ave a Certificate of Inspection (witin innipeg) or Certificate of Approval (outside innipeg). 2. Te ligting must be installed and operational in te customer s premises witin one year of Manitoba Hydro s pre-approval and all paperwork must be received by Manitoba Hydro witin 1 year of pre-approval. If all paperwork is not received your application will be canceled and te project will not be eligible for an incentive. If te installation deadline cannot be met, ten contact your Manitoba Hydro account representative in writing before pre-approval ends. 3. It is te customer s responsibility to dispose of all azardous materials (including PCBs) in accordance wit all applicable government regulations. 4. Ligting products tat are removed from te Manitoba Hydro system will not be resold, except for scrap purposes, nor will tey be installed elsewere. 5. For exterior ligting, luminaires must not be installed and aimed in a manner so as to cause glare onto neigbouring properties, streets, or igways. 6. For T5 & T8 fluorescent ligting systems, Remote Master-Slave wiring is not allowed. Back-toback tandem wiring of 4 lamps into 8 fixtures is acceptable. New building ligting incentives Interior ligting If you are installing energy efficient interior ligting in a new building or in a new addition to an existing building, you may qualify for incentives from te New Buildings Program. Contact te New Buildings Program at: NewBuildings@ydro.mb.ca New Buildings Program 360 Portage Ave. (7) innipeg MB R3C 0G8. Exterior ligting You may qualify for exterior ligting incentives for your new building or addition troug te Commercial Ligting Program. To apply for exterior ligting incentives and find out if your project is eligible: Make sure you meet te Commercial Ligting Program requirements. Complete te Ligting application and attac Appendix F. Include te following wit your New Construction Ligting application for exterior ligting projects: Te Total Base Case Allowance for Exterior Ligting excel file from te CLP website, and a copy of te building layout wit exterior ligting drawings; Exterior ligting allowance calculations as required by te MECB (see Section 4.2.3). For elp wit tese calculations, visit te National Researc Council Canada s website at nrc-cnrc.gc.ca/eng/publications/ codes_centre/2014_user_guide_necb2011.tml Price quotation wit itemized material and labour costs; 8 Commercial Ligting Program PROGRAM GUIDE November 2017

9 Ligting product specification seets for your proposed ligting systems. Only products on te Eligible Product List (EPL) or te DesignLigts Consortium (DLC) Qualified Product List, are eligible for incentives. Submit your application and attacments to: Commercial Ligting Program 360 Portage Ave (7) innipeg MB R3C 0G8. Manitoba Hydro will determine if your project is eligible for incentives and issue written pre-approval on your project. Te estimated incentive will be calculated based on ow muc te project exceeds te MECB allowances. Commercial Ligting Program PROGRAM GUIDE November

10 How to complete an application PF2956(2)/f Rev Commercial Ligting Program Renovations Incentive Application Application no. PSL 1 2 Customer information Business name Contact name ABC Commercial Company Jane Smit 123 Any Street AnyCity MB A1B 2C3 (204) (204) janesmit@mail.com Mailing address City/town Province Postal code Pone no. Fax no. Installer information Company name Mailing address City/town Province Postal code Pone no. Fax no. Project site information Building use description DEF Electrical Company Contact name Jack Gold 456 Some Street AnyTown MB D4E 5F6 (204) (204) office and wareouse DEFelectric@mail.com GST registration no. Building address (if different from Customer mailing address) City/town Province Postal code 4 EXPECTED START yyyy mm dd EXPECTED COMPLETION yyyy mm dd Customer acknowledgment (Read cover page of tis Application before signing.) I, te Customer, ave read and understood te Agreement and te Program Eligibility Criteria printed on te cover page of tis Application. I agree to te listed terms and conditions and warrant tat I fully qualify and ave complied wit suc terms and conditions. Ceque payment information (Read te back of tis Application before signing.) Payee name Manitoba Hydro account no. Personal information is being collected under te autority Program Activity and Te Manitoba Hydro Act. Te purpose is to provide incentives to commercial customers for upgrading teir ligting and to acquire specific related information to calculate energy and demand savings resulting from te program. Oter uses and disclosures may be to participating contractors, electronic system for program tracking, Public Utilities Board for statistical reporting, external auditors as part of a sample audit, government entities for reporting purposes and Manitoba Hydro officials on a need to know basis. Te personal information is protected by te Protection of Privacy provisions of Te Freedom of Information and Protection of Privacy Act. If you ave any questions about te collection, contact Power Smart for Business at Manitoba Hydro, 360 Portage Ave., innipeg, MB R3C 0G8 or telepone DEF Electrical Company Ceque mailing address City/town Province Postal code Voluntary assignment** (Do not sign if te Incentive is to be paid to te Customer.) I, te Customer, do ereby irrevocably direct and autorize Manitoba Hydro to pay te Incentive to te vendor or Installer named in te box titled CHEQUE PAYMENT INFORMATION I understand tis incentive amount is an ESTIMATE only and tat tis application must be PRE-APPROVED by MH BEFORE ordering/purcasing ligting or starting work on te project. Signed by (Customer) yyyy mm dd Print name Print title 456 Some Street AnyTown MB D4E Signed by (Customer) Jane Smit Jane Smit President TOTAL INCENTIVE PAYABLE (subject to final inspection and submission of invoices) Jane Smit yyyy mm dd ** Note: Manitoba Hydro reserves te rigt to apply te Incentive first to any outstanding account balances or loans of te Customer and to pay te balance, if any, to te vendor or Installer to wom te Customer as assigned te Incentive , MANITOBA HYDRO USE ONLY Pre-inspection (RR) Receipt (MP) STATUS Tec review 1 (CES) Tec review 2 (CES) Application verified by (Regional Representative) yyyy mm dd Payment autorized by (Program Coordinator) yyyy mm dd Disbursements Ceque no. Ceque amount Ceque delivery instruction (Refer to P95 for ceque delivery code) Ceque delivery code Name Data entry use only CH Payee code Due date yyyy mm dd Approved by (Marketing Programs Manager) yyyy mm dd Incentive breakdown Cost element Order no. Activity code Amount Approved by (Group Manager Financial Services) yyyy mm dd Net Amt Tax code 1G DISTRIBUTION: PINK Manitoba Hydro BLUE Customer * Manitoba Hydro is a licensee of te Trademark and Official Mark. 10 Commercial Ligting Program PROGRAM GUIDE November 2017

11 Te front application page is identical for renovation and new construction (outdoor ligting measures only) applications and must be completed in full, including dated by te signatory on te date te application is signed. 1. Te installer information is required in case tere are questions about te equipment being installed. 2. Enter te address of te building were te installation is taking place. Include te project start and completion dates, even if tey are estimates. 3. A and written signature by te customer is required and te application must be dated at te time of te signature. Te customer must ceck te box above te signature to indicate agreement and understanding of te terms and conditions. Do not sign and date te application until te existing and proposed system information is filled in. 4. Te customer can assign te incentive to a vendor or installer. Indicate te name and mailing address of te individual or organization tat sould receive te ceque only if it s not te customer. 5. Te total incentive payable comes from te summary of measure incentives (directly following tis page). 6. If te ceque is to be assigned to te vendor or installer, te customer must autorize tis wit a signature and date in tis box. 7. Your Manitoba Hydro account representative will verify te application for completeness and eligibility before forwarding it to te Marketing Programs department. Commercial Ligting Program PROGRAM GUIDE November

12 PF2956(3) Rev Commercial Ligting Program Summary of Ligting Incentives Application no. PSL Instructions: Complete tis page last. 8 TOTAL LIGHTING INCENTIVES 1. LED fixtures & retrofit kits 1. 11, LED lamps 2. 2, T5 fluorescent ligting systems T8 & T5 energy efficient lamps Custom option Ligting system controls and occupancy sensors (attac Appendix D) LED backlit signage (attac Appendix E) 7. TOTAL INCENTIVE PAYABLE (carry tis total to front of Application) 13, * Manitoba Hydro is a licensee of te Trademark and Official Mark. 12 Commercial Ligting Program PROGRAM GUIDE November 2017

13 Te summary of measure incentives page is filled out in te same manner for bot renovation and new construction (outdoor ligting measures only) applications. 8. Te incentive for eac measure is summarized on tis form. Incentives for eac measure are calculated and brougt fort from te measure incentive calculations pages. 9. Tis total is carried forward to te front application seet. Commercial Ligting Program PROGRAM GUIDE November

14 11 13 PF2956(4) Rev Commercial Ligting Program LED Fixtures Incentive Calculations 1. LED Fixtures & Retrofit Kits Instructions: Use tis page for fixtures wit prescriptive incentives. Refer to incentive seet for incentive amounts. Proposed system must list location number from Existing system table. System incentive is equal to te number of fixtures multiplied by incentive per proposed fixture. If te same product is being installed in different locations, specify annual ours of operation for eac location. Te Customer is responsible for ensuring tat te LED product being purcased is suitable for te environment in wic it is being installed. Te CLP will determine if te LED product is suitable for any incentives. 10 Application no. PSL Page of PHOTOCOPY AND RETAIN ONE COPY FOR YOUR RECORDS. Reasons for cange Illumination: more same less Need for wite ligt Reduce maintenance Reduce ligting bill Building renovation Improve aestetics Location no Location Building Exterior Entrance Building Exterior alls Main areouse 12 EXISTING SYSTEM Usage Indoor Outdoor Indoor Outdoor Indoor Outdoor Lamp input power () Fixture input power () Fixture/lamp type Lamps/fixture No. of fixtures Annual ours of operation Metal Halide HPS T12/4 foot Indoor Outdoor 5. Indoor Outdoor 6. Indoor Outdoor 7. Indoor Outdoor 8. Indoor Outdoor PROPOSED SYSTEM 16 Location Approval Fixture input Fixture initial Material cost Incentive/ Annual ours of Manufacturer Model no. Fixture type No. of fixtures System Incentive () no.¹ power () Lumens (L) () proposed fixture operation EPL DLC² 1 AAA Ligt LED Flood ligt L L 2 BBB Ligt LEDR Z B all pack , CCC Ligt MCF3842 igbay L , L 3 CCC Ligt FLED igbay , L L L ¹ List location number from Existing System table above. ² Required documents for DLC products: Attac a specification seet (indicating electrical caracteristics, DLC listing, warranty, and temperature rating). Outdoor use LED fixtures must meet 40 C temperature requirements. L TOTAL INCENTIVE 1. 11, * Manitoba Hydro is a licensee of te Trademark and Official Mark. 14 Commercial Ligting Program PROGRAM GUIDE November 2017

15 10. If you need more tan one page, number tem ere. Blank copies are available on te CLP website. 11. Indicate reason for ligting cange. Tis doesn t affect te incentive amount. 12. Provide room name or brief description of te area, for example: allway, stairs, front office, and etc. 13. rite in te location number from te above Existing System table. If tere is more tan one Proposed fixture type/model replacing te same Existing fixture, in te same location, reuse te Location number to indicate tis (as illustrated wit Location number 3). 14. Ensure te manufacturer name and model number of te LED lamp matc wit te product listing on te Eligible Product List (EPL), DesignLigts Consortium (DLC) Qualified Product List. 15. Product must eiter be on te Eligible Product List (EPL) or te DesignLigts Consortium (DLC) Qualified Product List. 16. Enter te ours of operation for eac location and area. 17. Te total measure incentive is carried forward to te summary of measure incentives page. Fixture incentives will be capped at te lesser of te prescriptive fixture incentive or te fixture material cost. Note tat pre-approval will not be issued unless all information is listed under te existing system and proposed system. Attacing a spreadseet in place of filling out te incentive calculation form will not be accepted. Commercial Ligting Program PROGRAM GUIDE November

16 PF2956(5) Rev Commercial Ligting Program LED Lamps Incentive Calculations Application no. PSL 2. LED Lamps including line voltage, specialty, and low voltage Instructions: Use tis page for LED lamps wit prescriptive incentives. Refer to incentive seet for incentive amounts. Proposed system must list location number from Existing system table. If te same product is being installed in different locations, specify annual ours of operation for eac location. Te Customer is responsible for ensuring tat te LED product being purcased is suitable for te environment in wic it is being installed. Te CLP will determine if te LED product is suitable for any incentives. Location no Indoor Indoor Indoor Indoor Indoor Indoor Indoor Indoor EXISTING SYSTEM Lamp type Usage (INC, HAL, CFL, T8, MH, HPS) Location description atts Quantity Annual ours of operation allways Indoor Outdoor Halogen stairwells nort side Indoor Outdoor Halogen stairwells sout side Indoor Outdoor Incandescent back room wareouse Indoor Outdoor T8 fluorescent lobby Indoor Outdoor Metal alide Outdoor Outdoor Outdoor Outdoor Outdoor Outdoor Outdoor Outdoor 19 PROPOSED SYSTEM Lamps Incentive Approval Annual ours of Location Rated Manufacturer Model no. atts Quantity Incentive/lamp Total operation no.¹ ENERGY EPL DLC² lamp ours STAR 1 DDD Ligt SV1 42 LX , = EEE Ligt D3 21 ST 16 25, = EEE Ligt D3 21 ST 16 25, = FFF Ligt RFG 112-T8-5K 18 50, = FFF Ligt RFM-184-T8-3K 12 50, = GGG Ligt M3 R , = = = = = = = = TOTAL INCENTIVE 2. 2,050 ¹ List location number from Existing System table above. ² Required documents for DLC products: Attac a specification seet (indicating electrical caracteristics, DLC listing, warranty, and temperature rating). Outdoor use LED fixtures must meet 40 C temperature requirements. 22 * Manitoba Hydro is a licensee of te Trademark and Official Mark. 16 Commercial Ligting Program PROGRAM GUIDE November 2017

17 18. Provide room name or brief description of te area. 19. rite in te location number from te above Existing System table. If tere is more tan one Proposed LED lamp type/model replacing te same Existing lamp, in te same location, reuse te Location number to indicate tis (as illustrated wit Location number 4). 20. Ensure te manufacturer name and model number of te LED lamp matc wit te product listing on te Eligible Product List (EPL), DesignLigts Consortium (DLC) Qualified Product List, or te ENERGY STAR certified bulb list. 21. LED lamps must be on te Eligible Product List (EPL), DesignLigts Consortium (DLC) Qualified Product List, or ENERGY STAR certified. 22. Te total measure incentive is carried forward to te summary of measure incentives page. Te lamp incentives will be capped at te lesser of te prescriptive lamp incentive or te lamp material cost. Commercial Ligting Program PROGRAM GUIDE November

18 PF2956(7) Rev Commercial Ligting Program T5 Fluorescent Ligting Systems Incentive Calculations T8 & T5 Energy Efficient Lamp Incentive Calculations Application no. PSL 3. T5 fluorescent ligting systems 4 FOOT T12 SYSTEM Location EXISTING SYSTEM Lamps/ atts/fixture Type fixture (including lamps) Fixture quantity 8 FOOT T12 SYSTEM HID TYPE 2 Slimline HO 205 areouse Probe Start MH Pulse Start MH INCANDESCENT or oter, specify: 28 PROPOSED T5 SYSTEM Ballasts Lamps Fixture Incentive Annual ours of Category² No./ Ballasts/ Fixture Incentive Manufacturer Model no. Voltage Input power Lengt Total operation (LH or SH) fixture fixture quantity /fixture JJJ Ligt T5FL LH 28 LH 120 V ft = V V ft. ft. = = V ft. = ² Category: Low Harmonics (LH) or Standard Harmonics (SH). TOTAL INCENTIVE T8 & T5 energy efficient lamps Location Existing lamp wattage T8 or T5 PROPOSED SYSTEM Lamps Manufacturer Model no. Input power Quantity Back assembly 32 T8 LLL Ligt T8EEL R = Front assembly 54 T5 MMM Ligt T5EEL K = Incentive/ lamp Incentive = = Total Annual ours of operation = = TOTAL INCENTIVE * Manitoba Hydro is a licensee of te Trademark and Official Mark. 18 Commercial Ligting Program PROGRAM GUIDE November 2017

19 23. Provide room name or brief description of te area. 24. Altoug te incentive is paid on a per fixture basis, ensure te manufacturer name and model number of te T5 ballasts are on te Eligible Product List and recorded. 25. Te total measure incentive is carried forward to te summary of measure incentives page. 26. Provide room name or brief description of te area. 27. Ensure you clearly indicate T8 or T5 lamps. 28. Ensure tat te manufacturer name and model number of te lamps are on te Eligible Product List (EPL) and recorded. 29. Te total measure incentive is carried forward to te summary of measure incentives page. Commercial Ligting Program PROGRAM GUIDE November

20 PF2956(8) Rev Commercial Ligting Program Custom Option Incentive Calculations Instructions: Complete tis form to describe your existing and proposed ligting system were no prescriptive incentives exist. If additional space is required, make copies of tis page and attac te completed pages to te application. If te project as any type of ligting controls, complete Appendix D: Ligting Control Systems and Occupancy Sensors. If te project as LED backlit signage complete Appendix E: LED Backlit Signage. Tis option may also be used for innovative equipment and designs were no prescriptive incentives exist. Customized proposals submitted by qualified ligting designers tat can demonstrate demand reductions will be evaluated upon request. Required information: Copy of te price quote detailing material costs for eac proposed ligting product. Existing System and Proposed System information must be filled out in te tables below. Te Customer is responsible for ensuring tat te LED product being purcased is suitable for te environment in wic it is being installed. Te CLP will determine if te LED product is suitable for any incentives. 30 Application no. PSL Page of PHOTOCOPY AND RETAIN ONE COPY FOR YOUR RECORDS. Reasons for cange Illumination: more same less Need for wite ligt Reduce maintenance Reduce ligting bill Building renovation Improve aestetics Description of proposed ligting system Location no Office Private office 33 Location EXISTING SYSTEM Usage Indoor Outdoor Indoor Outdoor Indoor Outdoor Lamp input power () Fixture/lamp type Lamps/fixture No. of fixtures T12/4 ft Fixture input power () Annual ours of operation T8/2 ft Indoor Outdoor 5. Indoor Outdoor 6. Indoor Outdoor PROPOSED SYSTEM Location no.¹ Approval Fixture input Fixture initial Annual ours of Manufacturer Model no. Fixture/lamp type No. of fixtures Material cost () power () Lumens (L) operation EPL DLC² L LED troffer , NNN Ligt LED6 RS-22 1 SSS Ligt LED8-5K-120-ST 2 OOO Ligt LEDMR FG 4G LED troffer L L LED specialty L L L ¹ List location number from Existing System table above. ² Required documents for DLC products: Attac a specification seet (indicating electrical caracteristics, DLC listing, warranty, and temperature rating). Outdoor use LED fixtures must meet 40 C temperature requirements. * Manitoba Hydro is a licensee of te Trademark and Official Mark. TOTAL MATERIAL COST Manitoba Hydro use only: TOTAL INCENTIVE 6. 13, Commercial Ligting Program PROGRAM GUIDE November 2017

21 30. If you need more tan one page, number tem ere. Blank copies are available on te CLP website. 31. Indicate reason for ligting cange. Tis doesn t affect te incentive amount. 32. Include details about te proposed ligting system. 33. Provide room name or a brief description of te area. 34. rite te location number from te above Existing System table. If tere is more tan one Proposed fixture type/model replacing te same Existing fixture, in te same location, reuse te Location number to indicate tis (as illustrated wit Location number 1). 35. Ensure te manufacturer name and model number of te LED lamp matc wit te product listing on te Eligible Product List (EPL), DesignLigts Consortium (DLC) Qualified Product List. 36. Product must eiter be on te Eligible Product List (EPL) or te DesignLigts Consortium (DLC) Qualified Product List. 37. If your ligting upgrade is eligible and approved by Manitoba Hydro for an incentive, te incentive will be calculated by Manitoba Hydro at up to 1,000 per k saved and capped at te ligting product cost including taxes but excluding labour, design, or oter associated equipment. Te calculations use Manitoba Hydro base case tecnologies. Leave tis box blank. Commercial Ligting Program PROGRAM GUIDE November

22 PF2962C Rev Commercial Ligting Program Hotel/Motel Individual Suite Ligting Verification Appendix C Application no. PSL Instructions: Complete tis form wen you apply for a Power Smart* Commercial Ligting Program (CLP) incentive for otel and motel individual suites. Information on common area and allway ligting can be provided on te respective CLP application page. Complete tis form and attac it to your CLP application. CLP will determine if te ligting tecnology is suitable for any incentives. For furter assistance, contact your local Energy Services Advisor or Power Smart Sales Representative or call or Hotel information No. of rooms inter occupancy rate Summer occupancy rate % % Ligting system information LED lamps Location (wasroom, table lamp, entrance) EXISTING SYSTEM Lamp type (INC, HAL, CFL) System 1 atts Quantity entrance table lamp main room wall sconce incandescent incandescent alogen System 2 atts Quantity PROPOSED SYSTEM Lamps Incentive Nigt ligt Location quantity 1 Rated lamp Manufacturer Model no. atts ours Quantity Incentive**/lamp Total entrance table lamp RRR Ligt RRR Ligt PS28 PS , , = = main room wall sconce TTT Ligt MK , = 1,732 = TOTAL MEASURE INCENTIVE 3,702 2 LED fixtures** Lamp type and wattage (INC, MV, MH, HPS, etc.) Fixture type, manufacturer and model no. Fixture location in room No. of fixtures Design information atts per fixture including ballast EXISTING SYSTEM System 1 System 2 CFL 26 CFL asroom Estimated cost of proposed system N/A N/A System 1 52 w w 30 PROPOSED SYSTEM LED, UUU Ligt R2156 asroom All custom options must be approved by Manitoba Hydro s Ligting Engineer before installation begins. Incentive amount will be available once pre-approval is received. w System 2 Total kilowatt ligting load (MH USE ONLY) k k k k w Customer statement I, te Customer, declare tat te above information is true and understand and acknowledge tat tis Verification will form part of my Application. Jane Smit Signed by (Customer) yyyy mm dd PHOTOCOPY AND RETAIN ONE COPY FOR YOUR RECORDS. 1. Ensure location of proposed system matces wit te existing system above Te measure incentive is carried forward to te summary of measure incentive page in te #6. Custom option * Manitoba box. Hydro is a licensee of te Trademark and Official Mark. 3. Tis incentive will be calculated by Manitoba Hydro. 4. Te customer (not te supplier or contractor) must sign tis. 22 Commercial Ligting Program PROGRAM GUIDE November 2017

23 1 PF2962D Rev Commercial Ligting Program Ligting Control Systems and Occupancy Sensors Appendix D Application no. PSL Instructions: Complete tis form wen you apply for a Power Smart* Commercial Ligting Program (CLP) incentive for any type of ligting control system or occupancy sensor. Indicate page number(s) on all copies. Attac required documentation: Tecnical specifications of proposed system, including a product specification seet. Estimated material cost for te new system (system ardware only). Attac completed form and all documentation to your CLP application. Te CLP will determine if te ligting tecnology is suitable for any incentives and advise you in writing if your project as been pre-approved and work can begin. For furter assistance, contact your local Energy Services Advisor or Power Smart Sales Representative or call or Page of PHOTOCOPY AND RETAIN ONE COPY FOR YOUR RECORDS. Dimming control system information Description of proposed ligting system Do you turn off your ligts after business ours? Yes No Location Dimming low. system wit programmable controller. Dimming scedule indicated be- Manufacturer Model no. Fixture power No. of Total power fixtures % Main floor left wing VVV Dimming System LO ,000 2 Power level Annual ours of ligting operation 50 % % 1000 Material cost % % Occupancy sensors and switcing control system information Description of proposed ligting system Do you turn off your ligts after business ours? Yes No Location Manufacturer Model no. No. of sensors Sensor type ¹ Total system power Annual ours of ligting operation (before) For controls only Annual ours (after) office XXX sensor 9009XL , , TOTAL fixture mounted sensors on office fixtures see attaced Excel seet listing fixture wattages 1,000 Material cost ¹ Type 1 wall switc replacement and fixture-mount sensors. Type 2 all oter sensors. MANITOBA HYDRO USE ONLY No. of x Incentive = Total sensors amount Incentive 6 Dimming control system total incentive = Sensors and switcing total incentive = TOTAL 2,040 * Manitoba Hydro is a licensee of te Trademark and Official Mark. 1. Ceck boxes once required documents are attaced. 2. Total Power = Fixture power x No. of fixtures. 3. Total system power = No. of sensors x sensor wattage controlled. 4. Current annual ours of ligting operation. 5. Expected annual ours of ligting operation wit new control system. 6. Manitoba Hydro will calculate te incentive. Commercial Ligting Program PROGRAM GUIDE November

24 PF2962E Rev Commercial Ligting Program LED Backlit Signage Appendix E Application no. PSL Instructions: Complete tis form wen you apply for a Power Smart* Commercial Ligting Program (CLP) incentive for upgrading to LED backlit signage. Attac te tecnical specifications of te Proposed System, including te LEDs and te driver. Attac a sign drawing tat also includes: te dimensions; weter te sign is single-sided or double-sided; te location were te LEDs are to be installed inside te sign. Attac te completed form and all documentation to your CLP application and submit to Manitoba Hydro for pre-approval. Te CLP will determine if te ligting tecnology is suitable for any incentives and advise you once your project as been pre-approved. Once pre-approved you can order, purcase, and install your ligting. For furter assistance, contact your local Energy Services Advisor or Power Smart Sales Representative or call or EXISTING SYSTEM: T12 HO, T8 HO, or OTHER (excluding neon) Location Ligting tecnology No. of lamps Lamp type and lengt Exterior signage T12 HO 120 F72 (6 ) EXISTING SYSTEM: NEON (Incentive ends November 30, 2017) Location Colour Neon Diameter of tube Current Voltage Transformer rating Current Power No. Total power Lengt mm ma V A ft. mm ma V A ft. mm ma V A ft. PROPOSED SYSTEM LED Total Annual ours atts/ Incentive total Colour Manufacturer Model no. Lengt input power of operation foot ft. = wite QQQ Ligt MLF-LED-S2-R ft. = ft. = ft. = TOTAL INCENTIVE FOR MANITOBA HYDRO USE ONLY 30 ma /foot No. feet Total Total k Neon base case 4.78 x = / 1,000 = LED Savings 60 ma /foot x No. feet = Total / 1,000 = Total k 1. Manitoba Hydro will calculate te incentive. Neon base case 9.62 x = / 1,000 = LED 1.32 x = / 1,000 = Savings 8.30 Approved by (Manitoba Hydro Ligting Engineer) yyyy mm dd Available in accessible formats upon request. * Manitoba Hydro is a licensee of te Trademark and Official Mark. 24 Commercial Ligting Program PROGRAM GUIDE November 2017

25 PF2962F Commercial Ligting Program New Construction Outdoor Ligting Tecnology Appendix F Application no. PSL Instructions: Complete tis form wen you apply for a Power Smart* Commercial Ligting Program (CLP) incentive for New Construction Outdoor Ligting Tecnology. Use tis page for qualifying LED fixtures and oter ligting tecnologies. Proposed system must list te application type number from te first Proposed System table. System incentive will be calculated by Manitoba Hydro. If te same product is being installed for different exterior application types, specify annual ours of operation for eac application type. Attac completed form and all documentation to your CLP application. Te CLP will determine if te ligting tecnology is suitable for any incentives and advise you in writing if your project as been pre-approved and work can begin. For furter assistance, contact your local Energy Services Advisor or Power Smart Sales Representative or call or Application type no PROPOSED SYSTEM MECB exterior application type (as per te MECB tables in section ) 8 Page of PHOTOCOPY AND RETAIN ONE COPY FOR YOUR RECORDS. Attac required documentation: Building layout (dimensioned) wit exterior ligting drawings. Total Base Case Allowance for Exterior Ligting spreadseet. Follow te 4 steps on te spreadseet, wic is available for download from te CLP website. Te spreadseet does te exterior ligting allowance calculations as required by te Manitoba Energy Code for Buildings (MECB) section Price quotation wit itemized material and labour costs. Ligting product specifications seets for your proposed ligting systems. Only products on our Eligible Product List and LED fixtures on te DesignLigts Consortium website are eligible for incentives. If you select from te DesignLigts Consortium s list, you must also complete, sign and attac te DesignLigts Consortium Ligting Verification Appendix B Application type no.¹ Manufacturer Model no. PROPOSED SYSTEM Approval EPL DLC Fixture input power () Fixture type No. of fixtures Fixture initial Lumens (L) L Material cost () Annual ours of operation 6 6 Total Incentive Total base case allowance L Total Proposed L L 0.0 L L x up to 1/ ¹ List application number from Proposed System table above. Available in accessible formats upon request. * Manitoba Hydro is a licensee of te Trademark and Official Mark. TOTAL INCENTIVE Commercial Ligting Program PROGRAM GUIDE November

26 1. Provide te MECB exterior application type, as per te MECB tables in section rite in te application type number from te above Proposed System table. 3. Ensure te manufacturer name and model number of te fixture matc wit te product listing on te Eligible Product List (EPL) or te DesignLigts Consortium (DLC) Qualified Product List. If not, contact your Manitoba Hydro account representative. 4. Product must eiter be on te Eligible Product List (EPL) or te DesignLigts Consortium (DLC) Qualified Product List. 5. Enter te ours of operation for eac application type. 6. Provide te total base case allowance, as per te application type. 7. Te total measure incentive is carried forward to te summary of measure incentives page. Fixture incentives will be capped at te lesser of te prescriptive fixture incentive or te fixture material cost. 8. All of tese documents must be attaced to te Power Smart Ligting application. 26 Commercial Ligting Program PROGRAM GUIDE November 2017

27 Sample invoice DEF Electrical Company 456 Some Street AnyTown, MB D4E 5F6 2 Pone: DEFelectric@mail.com 1 Invoice Example Date Invoice # 11/20/ Invoice To Sip To ABC Commercial Company 123 Any Street AnyCity, MB A1B 2C3 2 ABC Commercial Company 123 Any Street AnyCity, MB A1B 2C3 2 P.O. No. Terms Rep Sip Via Order Date Project /31/ /20/2017 PSL# Item # Product Description Quantity Unit Price U/M Ext. Price 1 85 att LED fixture Manufacturer: AAA Ligt Model #: LED KlR7-R7-PC4U ea att LED wallpack Manufacturer: BBB Ligt Model #: LEDR-75-Z-B4-TY-RT8-R ea att LED lamp ea Manufacturer: DDD Ligt Model #: SV10-42-LX1-4K-R5-BV- 4 Labour Electrical Permit Date of purcase (must be after application written pre-approval date from MH). 2. Vendor s name, customer s name and install address. 3. Manufacturer name and model number of eac product (wic must matc te model number on te Eligible Product List (EPL), DesignLigts Consortium (DLC) Qualified Product List, or te ENERGY STAR certified bulb list. 4. Product description. 5. Product quantities. 6. Per unit product costs and total separate from design, labour and taxes. Page 1 Subtotal 10, GST PST Total 11, Payments/Credits 11, Balance owing 0.00 PAID 12/02/17 6 Commercial Ligting Program PROGRAM GUIDE November

28 Appointment of representative form PF2960 COMMERCIAL LIGHTING PROGRAM APPOINTMENT OF REPRESENTATIVE IMPORTANT NOTICE: To participate in te Program, you do not need to appoint anyone to be your Representative (including your Contractor). 1. full legal name of customer company (te Customer ) ereby autorizes and appoints Jack Gold from DEF Electrical Company full legal name of representative (te Representative ) 456 Some Street, Anytown, MB D4E 5F6 full address of Representative as te Customer s representative to act on its bealf in connection wit te completion and submission of te: a) Application for te Program and materials relating to demonstration of eligibility, but te Customer is still responsible for signing te Application; and b) Certificate of Inspection (witin innipeg) or Certificate of Approval (outside innipeg); Completion Declaration and Completion Questionnaire for te Program; and materials relating to demonstration of satisfactory completion of measure(s) and work including itemized invoicing detailing product costs (separate from design, labour, and taxes), product model details, date of purcase, and vendor s name requested for issuance of Program incentive. NOTE: If te Customer does not want te Representative to act on its bealf for bot Part (a) and Part (b) above, do not complete tis APPOINTMENT OF REPRESENTATIVE. 2. Te Customer ereby acknowledges and confirms tat te Customer as reviewed all of te foregoing Program forms (including all terms and conditions, and Program requirements) and te Customer understands and accepts te full legal and practical effects and risks of te present appointment and of aving te Representative to act on its bealf. NOTE: For instance, te Representative may decide at its discretion tat te retrofit measures ave been complete to te Customer s satisfaction, regardless of weter te Customer is actually satisfied or not. 3. Notwitstanding anyting to te contrary, te Customer ereby autorizes Manitoba Hydro and its officers, directors, employees, contractors, agents, and Program partners, to release to te Representative any information about te Customer (weter information provided to Manitoba Hydro or already in Manitoba Hydro s possession or control) tat Manitoba Hydro may deem necessary relating to te Customer s application to or participation in te Program, or te assessment or issuance of any Program incentive. 4. Te Customer understands and agrees tat: (a) its appointment of te Representative does not relieve any of te Customer s obligations as te applicant and participant under te Program, including, witout limitation, te Customer s obligation to comply wit all requirements of Manitoba Hydro at all times; and (b) any and all decisions, actions, and inactions, of te Representative will be deemed conclusively to be tose of te Customer, and te Customer is and will be fully responsible for te decisions, actions, and inactions, of te Representative in all respects in connection wit te Program at all times. 5. Te Customer sall, and sall also cause te Representative to, defend, indemnify, and save armless, Manitoba Hydro and its officers, directors, employees, contractors, agents, Program partners, successors, assigns, from and against any and all manners of action, causes of action, losses, costs, damages, expenses, suits, claims, liabilities, debts, and demands wic any of te foregoing persons or entities may suffer or be put to, or wic may be brougt or made against any of te foregoing persons or entities, arising out of any action or inaction of te Customer and/or te Representative, or any of teir respective directors, officers, employees, affiliates, contractors, subcontractors (troug every tier), representatives, or agents, or any breac of any Program requirement, or te negligence or misconduct of te Customer and/or te Representative or teir respective directors, officers, employees, affiliates, contractors, subcontractors (troug every tier), representatives, or agents. 6. Tis appointment sall remain in force until te time wen: (i) te Representative completes to Hydro s satisfaction te appointed acts selected by te Customer pursuant to Section 1 above); or (ii) wen Manitoba Hydro provides written acknowledgement to te Customer confirming Manitoba Hydro s receipt and acceptance of written notice from te Customer requesting revocation of te Customer s appointment of te Representative ereunder; wicever is earlier. 7. Tis Appointment sall be binding on and inure to te benefit of te Customer s successors, eirs, executors, administrators, and representatives. IN ITNESS HEREOF te Customer ereto as executed tis Appointment as at te date below to ratify and confirm te powers of te Representative by virtue of tis appointment. Customer company name Per: Signature of Autorized Signing Officer Name Position Date Jane Smit Jane Smit President July 1, 2017 ABC Commercial Company ABC Commercial Company Per: Signature of Autorized Signing Officer Name Position Date Application no. PSL DISTRIBUTION: HITE Manitoba Hydro YELLO Customer PINK Contractor * Manitoba Hydro is a licensee of te Trademark and Official Mark. 28 Commercial Ligting Program PROGRAM GUIDE November 2017

29 System wattage tables Nominal wattages for T12 fluorescent ligting systems Lamp lengt Units Number of lamps Fixture power () Rated life 2 (rs) Initial lumens (lm) Mean lumens (lm) Mean efficacy (lm/) Lamp loss depreciation foot systems (20) ,750 1, ,000 3 N/A N/A N/A N/A ,500 3, ,650 1, foot systems (25) ,300 2, ,000 3 N/A N/A N/A N/A ,600 5, ,180 1, foot systems (34) ,360 3, , ,540 5, ,720 7, ,600 4, foot slimline (60) ,200 8, ,000 3 N/A N/A N/A N/A ,400 16, ,800 6, foot HO (95) ,600 13, ,000 3 N/A N/A N/A N/A ,200 27, ,000 9, foot VHO (195) ,000 18, ,000 3 N/A N/A N/A N/A ,000 36, Indicates use of two-lamp ballasts. 2 Rated life at tree ours per start. Commercial Ligting Program PROGRAM GUIDE November

30 Nominal wattages for T8 fluorescent ligting systems Lamp lengt Units Number of lamps Magnetic ballast () Fixture power wit normal ballast factor Electronic ballast () Rated life 4 (rs) Initial lumens (lm) Mean lumens (lm) Mean efficacy (lm/) ,383 1, foot systems (17) ,767 2, ,500 3 N/A 48 4,150 3, ,533 5, ,167 2, foot systems (25) ,333 4, , ,500 6, ,667 8, ,044 2, foot systems (32) ,088 5, , ,131 8, ,175 11, N/A 60 5,900 5, foot slimline (59) 2 N/A ,800 10, ,000 3 N/A N/A N/A N/A N/A 4 N/A ,600 21, N/A N/A N/A N/A N/A 8-foot HO (86) 2 N/A ,400 15, ,000 3 N/A N/A N/A N/A N/A 3 Indicates use of two-lamp ballasts. 4 Rated life at tree ours per start. 4 N/A ,800 30, Commercial Ligting Program PROGRAM GUIDE November 2017

31 Nominal wattages for T5 fluorescent ligting systems Lamp lengt Units Lamp power () Number of lamps Fixture power (including ballast) () Rated life 5 (rs) Initial lumens (lm) Mean lumens (lm) Mean efficacy (lm/) 2-foot systems 3-foot systems 4-foot systems 5-foot systems 2-foot HO 3-foot HO ,350 1, , ,700 2, ,100 1, , ,200 3, ,900 2, , ,800 5, ,650 3, , ,300 6, ,983 1, , ,966 3, ,500 3, , ,000 6, ,000 4, foot HO 5-foot HO ,000 9, , ,000 13, ,000 18, ,000 6, , ,000 12, Rated life at tree ours per start. Commercial Ligting Program PROGRAM GUIDE November

32 Nominal wattages for ard wired compact fluorescent ligting systems Lamp power () Number of lamps Fixture power () Rated life (rs) Initial lumens (lm) Mean lumens (lm) Mean efficacy (lm/) Equivalent incandescent () , ,000 1,878 1, ,000 1,193 1, ,000 2,386 2, ,000 1,752 1, ,000 3,504 3, ,000 2,601 2, ,000 3,120 2, Nominal wattages for screw-in compact fluorescent ligting systems Lamp power () Number of lamps Fixture power () Rated life (rs) Initial lumens (lm) Mean lumens (lm) Mean efficacy (lm/) Equivalent incandescent () , , ,000 1, ,250 1,494 1, ,000 1,738 1, ,000 2,700 2, Commercial Ligting Program PROGRAM GUIDE November 2017

33 Nominal wattages for incandescent lamps Lamp wattage () Rated life (ours) Mean lumens (lm) Mean efficacy (lm/) 60 1, , , , , , ,000 9, ,000 16, ,000 1,000 22, Nominal wattages for alogen PAR (spotligt) lamps Lamp wattage () Rated life (ours) Mean lumens (lm) Mean efficacy (lm/) CBCP (cd) 45 2, , , , ,500 1, , ,500 1, , ,250 1, , ,750 1, , ,350 3, , ,000 7, ,500 1,000 4,000 18, ,333 Nominal wattages for alogen double-ended lamps Lamp wattage () Rated life (ours) Mean lumens (lm) Mean efficacy (lm/) 100 1,833 1, ,833 2, ,000 5, ,000 9, ,000 2,333 20, ,500 2,000 31, Please visit ydro.mb.ca/psfb for te most current information. Commercial Ligting Program PROGRAM GUIDE November

34 Nominal wattages for Hig Intensity Discarge ligting systems System type Units Number of lamps Lamp power () Fixture power (including ballast) () Rated life (rs) Mean lumens (lm) Mean efficacy (lm/) CRI ,000 1, ,000 2, ,000 3,225 (3,038) 26 (24) 45 (21) ,000 7,080 (7,127) 33 (33) 45 (19) MV coated lamps (clear in rackets) ,000 14,160 (14,254) 33 (33) 45 (19) ,000 10,015 (9,788) 34 (33) 45 (21) ,000 20,030 (19,576) 35 (34) 45 (21) ,000 17,225 (16,950) 38 (37) 45 (21) ,000 34,450 (33,900) 39 (38) 45 (21) 1 1,000 1,065 24,000 44,050 (43,325) 41 (41) 45 (21) 2 1,000 2,130 24,000 88,100 (86,650) 41 (41) 45 (21) ,000 5, ,500 8, Probe start (quartz) MH ,000 9, ,000 14, ,000 23, ,000 1,100 14,000 81, ,500 1,600 3, , ,333 1, ,000 3, ,000 5, ,000 9, Pulse start (quartz) MH (MHPS) ,000 12, ,250 18, ,000 21, ,000 26, ,000 31, ,000 60, ,000 1,080 13,500 92, ,000 2, Pulse start (ceramic) MH (CMH) ,500 4, ,000 6, ,000 10, ,000 19, continued on next page 34 Commercial Ligting Program PROGRAM GUIDE November 2017

35 System type Units Number of lamps Lamp power () Fixture power (including ballast) () Rated life (rs) Mean lumens (lm) Mean efficacy (lm/) CRI Pulse start (ceramic) CMH-HPS rated ,000 19, ,000 28, ,000 2, ,000 3, ,000 5, ,000 8, HPS ,000 14, ,000 19, ,000 25, ,000 45, ,000 81, ,000 1,080 24, , Notes: HPS MH MV Hig Pressure Sodium Metal Halide Mercury Vapour MHPS Metal Halide Pulse Start CMH Ceramic Metal Halide Commercial Ligting Program PROGRAM GUIDE November

36 For more information, contact your Manitoba Hydro account representative or: Call (innipeg) or ydro.mb.ca/psfb Revised November 2017 Printed on recycled paper Available in accessible formats upon request.