Manual Provided by emilitary Manuals -

Transcription

1 ARMY FM NAVY NAVSEA SS400-AD-MMO-010 AIR FORCE TO 13C AIRDROP OF SUPPLIES AND EQUIPMENT: RIGGING LOADS FOR SPECIAL OPERATIONS DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited. HEADQUARTERS DEPARTMENT OF THE ARMY DEPARTMENT OF THE NAVY DEPARTMENT OF THE AIR FORCE

2 C3, FM /NAVSEA SS400-AD-MMO-010TO 13C CHANGE HEADQUARTERS NO 3 DEPARTMENT OF THE ARMY DEPARTMENT OF THE NAVY DEPARTMENT OF THE AIR FORCE Washington, DC, 2 October 2000 AIRDROP OF SUPPLIES AND EQUIPMENT: RIGGING LOADS FOR SPECIAL OPERATIONS This change adds the procedures for rigging the Navy Special Warfare Rigid Inflatable Boat for low-velocity airdrop. This change also modifies the procedures for rigging the F470U boat in the A-22 cargo bag for low-velocity airdrop. FM /TO 13C , 07 October 1987, is changed as follows: 1. New or changed material is identified by a vertical bar in the margin opposite the changed material. 2. File this transmittal sheet in front of the publication for reference purposes. 3. Remove old pages and insert new pages as indicated below: Remove pages Insert pages Cover Cover i through vii i through vii 1-1 and and and and and through and and through through through through through 5-51 B-1 Glossary-1 Glossary-1 References-1 References-1 and References-2 DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited.

3 DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited. By Order of the Secretaries of the Army, Navy, and the Air Force: Official: JOEL B. HUDSON Administrative Assistant to the Secretary of the Army ERIC K. SHINSEKI General, United States Army Chief of Staff W.A. WHITLOW Major General, U S Marine Corps Chief of Naval Operations Director, Expeditionary Warfare Division (N75) LESTER L. LYLES General, USAF Commander, AFMC MICHAEL E. RYAN General, USAF Chief of Staff DISTRIBUTION: Active Army, Army National Guard, and U.S. Army Reserve: To be distributed in accordance with the initial distribution number , requirements for FM

4 C3, FM /NAVSEA SS400-AD-MMO-010/TO 13C * FM /NAVSEA SS400-AD-MMO-010/TO 13C FIELD MANUAL HEADQUARTERS NO DEPARTMENT OF THE ARMY NAVAL SEA COMMAND DEPARTMENT OF THE NAVY NO SS400-AD-MMO-010 DEPARTMENT OF THE AIR FORCE TECHNICAL ORDER Washington,DC 7 October, 1987 NO 13C AIRDROP OF SUPPLIES AND EQUIPMENT: RIGGING LOADS FOR SPECIAL OPERATIONS Paragraph Page TABLE OF CONTENTS PREFACE vii CHAPTER 1 CHAPTER 2 Section 1 INTRODUCTION Description of Items Special Considerations RIGGING HSLLADS CONTAINER LOADS RIGGING THE CONTAINER Description of Container Preparing Container Loading Container Constructing Container Straps Closing Container and Stowing Parachute Equipment Required Section II RIGGING TYPICAL LOADS FOR HSLLADS CONTAINERS Description Rigging the Loads Rigging Load Rigging Load Rigging Load Rigging Load Section III MODIFYING AND PACKING THE 22-FOOT AND 28-FOOT CARGO EXTRACTION PARACHUTES Modifying Cargo Extraction Parachute Deployment Bag Attaching Static Line and Bridle Loop Breakcord Stowing Suspension Lines Packing Parachute Stowing Static Line DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited i

5 C3, FM /NAVSEA SS400-AD-MMO-010/TO 13C Paragraph Page CHAPTER 3 Section 1 Section II RIGGING RUBBER RAIDING CRAFT RIGGING ZODIAC MARK III BOAT Description of Load Preparing Platform Installing Suspension Slings Stowing Sandbags Placing and Securing Honeycomb Preparing Boat Positioning Boat Stowing Scuba Tanks Preparing and Stowing Outboard Engines Stowing Paddles, Rucksacks, and Weapons Installing Load Cover Lashing Boat Safetying Suspension Slings Stowing Parachute Installing Parachute Release Flotation for Training Loads Marking Rigged Load Equipment Required RIGGING ZODIAC MARK III FUTURA BOAT Description of Load Preparing Platform Installing Suspension Slings and Stowing Sandbags Placing and Securing Honeycomb Stacks Preparing and Positioning Boat Stowing Boat Equipment and Accompanying Load Rigging Boat Marking Rigged Load Equipment Required Section III RIGGING Z-BIRD BOAT Description of Load Preparing Platform Installing Suspension Slings and Stowing Sandbags Placing and Securing Honeycomb Stacks Preparing Boat Positioning Boat Rigging Boat Marking Rigged Load Equipment Required Section IV RIGGING ZODIAC K40 BOAT Description of Load Preparing Platform ii

6 C3, FM /NAVSEA SS400-AD-MMO-010/TO 13C Paragraph Page Installing Suspension Slings and Stowing Sandbags Placing and Securing Honeycomb Stacks Preparing Boat Positioning Boat Preparing and Stowing Outboard Engine and Fuel Tanks Stowing Load and Paddles Installing Load Cover and Tie-down Rings Rigging Boat Marking Rigged Load Equipment Required Section V RIGGING ZODIAC K50 BOAT Description of Load Preparing Platform Installing Suspension Slings and Stowing Sandbags Placing and Securing Honeycomb Stacks Preparing Boat Positioning Boat Preparing and Stowing Outboard Engine and Fuel Tanks Stowing Load and Paddles Installing Load Cover and Tie-down Rings Rigging Boat Marking Rigged Load Equipment Required Section VI RIGGING DOUBLE ZODIAC F470U BOATS Description of Load Preparing Platform Installing Suspension Slings and Stowing Sandbags Placing and Securing Honeycomb Stacks Preparing Boats Positioning First Boat Preparing and Stowing Accompanying Load Leveling, Covering, and Lashing First Boat and Accompanying Load Placing and Loading Second Boat Lashing Second Boat to Platform Safetying Suspension Slings Stowing Parachutes Installing Parachute Release Marking Rigged Load Equipment Required iii

7 C3, FM /NAVSEA SS400-AD-MMO-010/TO 13C Paragraph Page Section VII Section VIII RIGGING THE IBS BUNDLE Description of Load Preparing Skid Preparing the IBS Preparing Engine and Fuel Tanks Positioning Boat and Engine Stowing Boat and Paddles Lashing the IBS Bundle Stowing Parachute Marking Rigged Load Equipment Required RIGGING ZODIAC F470U BOAT IN A-22 CARGO BAG Description of Load Adapting A-22 Cargo Bag Constructing Engine Protection Box Modifying Type IV Link Assembly for Use with Hydraulic Release Preparing Skid and A-22 Cargo Bag and Placing Engine Box Preparing Engine and Securing Engine in Box Preparing Boat and Inflation System Collapsing and Folding Boat, Completing Inflation System Connection, and Loading Fuel Tanks Securing A-22 Cargo Bag Installing Parachute Release and Parachutes Installing Flotation Devices and Chemical Lights Marking Rigged Load Equipment Required CHAPTER 4 RIGGING THE MOBILE OVER SNOW TRANSPORT (MOST) ON A 16-FOOT TYPE V AIRDROP PLATFORM FOR LOW-VELOCITY AIRDROP (LVAD) Description of Load Preparing Platform Preparing Load Building and Positioning Honeycomb Stacks on Platform Positioning Load Lashing Snow Mobiles and Sleds to Platform Installing Honeycomb, Release Tray and Load Cover Installing Suspension Slings, and Deadman's Tie Stowing Cargo Parachute Installing Extraction System Installing Parachute Release System Placing Extraction Parachute Installing Provisions for Emergency Restraints Marking Rigged Load Equipment Required iv

8 C3, FM /NAVSEA SS400-AD-MMO-010/TO 13C Paragraph Page CHAPTER 5 RIGGING THE NAVY SPECIAL WARFARE RIGID INFLATABLE BOAT Description of Load Preparing Platform Installing the Platform Release System Installing EFTC Lifting and Positioning Boat Preparing Boat Preparing the Sponson Inflation System Installing the Water-Activated Parachute Releases Installing the Boat Cover, Sponson Ties, and Sponson Covers Preparing Suspension Slings Installing Parachute Stowage Platform Installing Cargo Parachutes Installing M-2 Cargo Parachute Release Installing Parachute Restraints Installing Sponson Activation Lanyard Preparing and Testing NSW RIB Restraint System Connecting M-21 Cutter Arming Wire Lanyards Securing G-12E Static Line Placing Extraction Parachutes Marking Rigged Load Equipment Required APPENDIX A... A-1 APPENDIX B... B-1 GLOSSARY... Glossary -1 REFERENCES... References-1 v

9 C3,FM /NAVAIR SS400-AD-MMO-010/22/TO 13C PREFACE SCOPE This manual tells and shows how to rig the following airdrop loads for special operations: a. Four different HSLLADS containers or loads rigged for airdrop from the MC-130 aircraft. b. Six different inflated rubber raiding crafts rigged on SOCEPS for low-velocity airdrop from C-130, C-141, C-17 or C-5 aircraft. In addition, a rubber raiding craft and a small inflatable boat are rigged as airdrop bundles. c. The Mobile Over Snow Transport (MOST) for low-velocity airdrop on the type V airdrop platform from C-130, C-141, C-5, or C-17 aircraft. d. The Naval Special Warfare Rigid Inflatable Boat (NSW RIB) is rigged for low-velocity airdrop on a specially-designed platform from C-130, C-141, C-5, or C-17 aircraft.. USER INFORMATION The proponent of this publication is HQ TRADOC. You are encouraged to report any errors or omissions and to suggest ways of making this a better manual. Army personnel, send your comments on DA Form 2028 directly to: Director Aerial Delivery and Field Services Department USA Quartermaster Center and School 1010 Shop Road Fort Lee, Virginia Air Force personnel, send your reports on AFTO Form 22 through: Headquarters Air Mobility Command (AMC/DOKT) 402 Scott Drive, Unit 3AI Scott AFB, Illinois vi

10 C3,FM /NAVAIR SS400-AD-MMO-010/22/TO 13C Air Force personnel in Special Operations Command, send your reports on AFTO Form 22 through: HQ AFSOC/DOXT 100 Bartley Street, Suite 260 Hurlburt Field, FL to: Director Aerial Delivery and Field Services Department USA Quartermaster Center and School 1010 Shop Road Fort Lee, Virginia Also send an information copy of AFTO Form 22 to: SA-ALC/TILDP 485 Quentin Roosevelt Road Kelly AFB, Texas Navy personnel, send your comments through: Commander Code C 3244 Naval Air Warfare Center Weapons Division China Lake, California to: Director Aerial Delivery and Field Services Department USA Quartermaster Center and School 1010 Shop Road Fort Lee, Virginia vii