Developing Your Own Industrial Coatings Applicator Specialist

Size: px

Start display at page:

Download "Developing Your Own Industrial Coatings Applicator Specialist"

Jasper Lane
5 years ago
Views:

1 Developing Your Own Industrial Coatings Applicator Specialist coatings application specialties that you need to build your business. FTI s Coatings Applicator Specialist Program offers related instruction and on-the-job training (OJT) learning that lasts for three years, with 432 hours of related instruction and 6,000 hours of OJT. Contractors will learn to leverage the skills of their supervisors, foremen and experienced craftspeople, and meet the requirements set by the SSPC ACE-1/NACE 13 standard TG 320 Industrial Coating and Lining Application Specialist Qualification and Certification Program. Every critical skill set is included. Safety Corrosion Equipment Surface Preparation Spray Applications Coatings Specialty Applications Contractor Quality Management NACE Pipeline The LMCI, FTI and NACE International have collaborated to provide training and qualification to address the Operator Qualification (OQ) Rule for the oil and natural gas pipelines industry. The NACE International Operator Qualification Program provides training and qualifications that address 40 covered tasks for corrosion, including 13 coatings-related covered tasks.

Developing Your Own Lead Paint Removal Capabilities Through LMCI s partnership with the Finishing Trades Institute (FTI), utilizing their registered apprenticeship program and journeyperson

2 Developing Your Own Lead Paint Removal Capabilities Through LMCI s partnership with the Finishing Trades Institute (FTI), utilizing their registered apprenticeship program and journeyperson continuing education program, you can develop the skilled productive workforce for Lead Abatement that you need to build your business. Lead Paint Removal LMCI offers training resources for SSPC C-3 Lead Paint Removal, C-5 Lead Paint Removal Refresher, with a review and update relevant to EPA regulations and progress through discussions of 29 CFR and changes in the Respiratory Protection Standard (29 CFR ). The C-7 program s primary focus is the certification of the blasters who demonstrate proper blasting techniques. Lead Worker This course is designed to enable Lead Workers to perform his/her job with the knowledge and skills to work safely and productively while adhering to all state, federal and local regulations on lead and lead abatement. Participants may discuss topics related to both residential, commercial and industrial lead abatement including preparing for lead abatement, recognizing lead-base paint hazards, interior and exterior dust abatement, waste disposal and clean-up and inspection procedures.

3 The Value of Training Your Own Paint Applicator Workforce coatings application that you need for your business. FTI has branches all over North America in more than 60 training facilities, but also offers a single, dedicated FTI Director of Education at each location, to act as a single point of contact to take care of all educational needs. LMCI s Residential, Commercial and Industrial Painters and Decorators Program is a continuing education program for apprentice and journeypersons. Through a Director of Education, acting as single point of contact, with over 100 training programs, your company can develop a skilled, productive work force. Training is on the job, so you can make sure they learn the skills that work best for your business. Three-year Department of Labor approved education program 432 hours related instruction 6,000 hours on-the-job instruction Related classroom instruction at night, weekends or in 40-hour blocks

4 Developing Your Own Drywall Finishers drywall finishing that you need for your business. FTI offers branches all over North America in more than 60 Training Facilities, with a dedicated FTI Director of Education at each location to act as a single point of contact to take care of all educational needs. Two-year Department of Labor approved education program 288 hours related instruction 4,000 hours on-the-job instruction Related classroom instruction at night, weekends or in 40-hour blocks Blueprint Reading Architectural Drawings Green Building Sustainability Exterior Insulation Finishing Systems Ames Tools Inc., Appla-Tech, Inc. Better-than-Ever Tools

5 Developing Your Own Carpet, Resilient Linoleum, Laminate, Vinyl, Tile, and Specialty Flooring Specialists floor coverings that you need for your business. FTI offers branches all over North America in more than 60 Training Facilities, with a dedicated FTI Director of Education at each location to act as a single point of contact to take care of all educational needs. Four-year Department of Labor approved education program 576 hours related instruction 6,000 hours on-the-job instruction Related classroom instruction at night or in 40-hour blocks Blueprint Reading Architectural Drawings Green Building Sustainability Forbo product installation certification Ardex Henry product installation training Armstrong product and installation techniques

6 Developing Your Own Glazing and Glassworkers program and journeyperson continuing education program, you can develop the skilled productive workforce for glazing and glassworkers that you need for your business. FTI offers branches all over North America in more than 60 Training Facilities, with a dedicated FTI Director of Education at each location to act as a single point of contact to take care of all educational needs. Four-year Department of Labor approved education program 576 hours related/8,000 hours on-the-job instruction Related classroom instruction at night or in 40-hour blocks, providing relatively low-cost employee training Blueprint Reading Architectural Drawings Green Building Sustainability Storefront fabrication, layout, and installation Aluminum entrances, curtain wall systems, louvers Transits, lasers, and leveling Instruments Von Duprin Hardware Certification American Welding Society Certified Welding Inspector American Welding Society Certified Apprentices, Journeyperson, Welder Instructor Training Super Sky Skylight glazing Apprentices, Journeyperson, Train-The-Trainer Training.. I I, " ~ /1','I ' II, ' \ I \ ~ \ \

7 Developing Your Own Hydro Blaster/ Vacuum Trucking Technicians hydro blasters and vacuum truckers that you need for your business. Even with branches all over North America in more than 60 Training Facilities, a dedicated FTI Director of Education at each location acts as a single point of contact to take care of all educational needs. Two-year Department of Labor approved education program 288 hours related instruction 4,000 hours on-the-job instruction Related classroom instruction at night or in 40-hour blocks Hydro blasting techniques Hydro blasting equipment maintenance Vacuum technician techniques Vacuum technician equipment maintenance C.D.L. Class B with Hazmat Endorsement

8 Developing Your Own Metal Polishers, Refinishers and Metal Scratch Removers metal polishers, refinishers and metal scratch removers that you need for your business. LMCI offers branches all over North America in more than 60 Training Facilities, with a dedicated FTI Director of Education at each location to act as a single point of contact to take care of all educational needs. Three-year Department of Labor approved education program 288 hours related instruction 4000 hours On-the-Job instruction Related classroom instruction at night or in 40-hour blocks High Volume Low Pressure (HVLP) Spray System Conventional Air Spray System Electrostatic Spray Systems

EXISTING CONDITIONS

02 00 00 EXISTING CONDITIONS 02 01 00 Maintenance of Existing Conditions 02 01 50 Maintenance of Site Remediation 02 01 65 Maintenance of Underground Storage Tank Removal 02 01 80 Maintenance of Facility