Rotary International District 5580 District Grant Application Grant #

Size: px
Start display at page:

Download "Rotary International District 5580 District Grant Application Grant #"

Transcription

1 Rotary International District 5580 District Grant Application Grant # Note: Rotarians completing this District Grant Application should submit this form to the appropriate Rotary International District 5580 Grants Committee Mentor (GCM) and D5580 Grants Committee Chair (GCC). Contact information is available at Forms to be submitted typed, not hand written. NOTE: Select a box, double click on it. Then, from the sub-menu select checked or not checked, then click on Okay. Application [document must be completed in its entirety, including signatures] District Grant Project Title: Modern Manufacturing Learning Lab Primary Contact s Rotary Club: Name: Bob Russell Fergus Falls, MN Noon Phone: (B): : (H): (F): rrussell@prtel.com Mentor s Name: Phone: Date Submitted Estimated Timeline September 1-30, 2015 SECTION 1: PROJECT DESCRIPTION Explanation: District Grants support the humanitarian service projects of Rotary clubs and districts. In this section, describe in detail the humanitarian need your project will address, the intent of the project, how the project will be implemented, and how Rotarians will be directly involved in the project. Rotarian involvement is required and a one year timeline is requested (start to finish). Please provide the name of the project site, the city or village, state or province, and country. List multiple locations, if applicable. Project site: Kennedy Secondary School City / Village: Fergus Falls State / Province: Minnesota Country: U.S.A. Describe how the benefiting community will maintain this project after grant funding has been fully expended. Project will benefit local school district (Independent School District 544 or ISD 544) which has committed to on-going upkeep and maintenance. Describe specific activities of the benefiting community partners in implementing the project. How will the Rotarians who are members of the partner clubs be involved the project? Please note that financial support is not considered active involvement. (See the District Grant application instructions for suggestions.) Need to modernize school facilities utilized for instruction in graphic arts, carpentry, auto mechanics, electronics, photography, drafting, small engines and woodworking was identified in summer of 2013 and task force was formed by the two Rotary clubs in Fergus Falls to document the need, determine the scope of the Modern Manufacturing Learning Lab ( M²L² ) overall project, set up budget and timeline, raise funds, provide manual assistance where needed, and insure completion of this project. Task Force populated RI District 5580 District Grant Proposal-Application: Page 1 of 11

2 with members from both clubs and representatives of school system, city and local manufacturers. Total project was originally projected to take three years and to cost $344,277; budget was revised to $317,485 to eliminate 10% contingency of budgeted equipment purchases of $277,777 and to reflect actual expenditures. Rotary Clubs of Fergus Falls initially contributed $10,000 to effort. Entire project has raised all funds needed through cash and pledges save and except all the money needed to purchase the last item budgeted to be purchased. There is enough cash on hand to purchase one vertical mill now and with remaining pledges, when received, and approval of this request for $3,250 and the Fergus Falls Rotary clubs contributing $3,250, to fund the second vertical mill at a cost of $32,887, which would be purchased no later than beginning of school year. Total cost of second vertical mill will be $32,887, as reflected by cost estimate attached, and, as referenced, we are short $6,500 to purchase it. Spec sheet for vertical mill also attached. SECTION 2: PROJECT BUDGET Explanation: For detailed information on what TRF will fund, please see The Guide to Matching Grants (144-EN). Official RI exchange rates can be found at Please use the most recent rate. Your estimated costs below must include quotes from a bona-fide vendor if costs for items exceed $100. Budget Item Name of Supplier Amount Haas TM-1P Toolroom Mill Productivity Inc. 32, Subtotal 32, Exchange rate used US $1= Total in U.S. dollars $32, You must substantiate your project with actual receipts when completing the Final Report or the Final Report will be returned as incomplete. RI District 5580 District Grant Proposal-Application: Page 2 of 11

3 SECTION 3: PROJECT PLANNING Explanation: Before an application is submitted to Rotary International District 5580 GC, project partners should discuss various planning details. The questions below are a guide to aid project planning. Note that a Rotary club/district or Rotarian may not own or benefit from anything purchased with grant funds. Identify who will own equipment and maintain, operate, and secure items purchased with grant funds. (A Rotary club or Rotarian cannot own equipment.) Independent School District # 544 Will training in use and maintenance of technical equipment be provided? If so, who will provide training? Vocational school instructors have been attending training sessions on the Vertical Mill to be purchased, and costs of such training have been deferred through funds raised during the course of the project. Is software necessary to operate any items? If so, has software been provided? Project software has been obtained through other funds raised during the course of the project. Indicate what financial arrangements have been made to pay for this project (i.e. Are you working with other organizations or are Rotarian contributions a part of your funding)? For the overall project, funds were raised from businesses in the area, West Central Initiative, the Veden Trust (which has completed a $120,000 matching grant challenge), other trusts and banks, and the $10,000 already contributed by the two Rotary Clubs of Fergus Falls. The Modern Manufacturing Learning Lab project has raised cash and pledges of $310,985 to date and remaining pledges will be completed in the next year. With the pledges received and yet to be received, we are $6,500 short of the $32,887 needed to purchase the second of two vertical mills needed to fully equip the Modern Manufacturing Learning Lab. Have the sponsor clubs/districts planned and agreed to fund plumbing or electrification for equipment and appliances in existing buildings (hospitals, schools, libraries, orphanages, etc.)? Yes. The initial work done was removing everything from the classroom at the school and upgrading electricity and lighting; no plumbing work was or will be required. Installation of second vertical mill will be done by a factory trained technician (see attached quote from Productivity Inc., which references same). The mission of The Rotary Foundation is to enable Rotarians to advance world understanding, goodwill, and peace through the improvement of health, the support of education, and the alleviation of poverty. How will this project meet the mission of Rotary Foundation? The Modern Manufacturing Learning Lab was envisioned to enhance educational opportunities available in Fergus Falls, benefiting students, their prospective employers and our own community, as well as other communities in which the students may ultimately work. A key component of enhancing that educational opportunity is having a second vertical mill in place to fully equip the Modern Manufacturing Learning Lab with the equipment necessary to expose as many students as possible to the opportunities available in today s manufacturing environment. Describe the project and the problem or need it will address, including the intended beneficiaries and how the project will benefit the community in need. Provide the estimated length of time needed to complete the project including a START (cannot start prior to July 1 st ) and END DATE. Purpose: The primary goal in the Fergus Falls High School is to prepare students in grades 9-12 for the next step in their life, whether that is college, technical college or full-time employment. Both staff and students are encouraged to stretch their academic, professional and personal abilities by setting high expectations and pursuing them rigorously. The Industrial Technology area offers instruction in graphic arts, carpentry, auto mechanics, electronics, photography, drafting, small engines and woodworking. The west central region of Minnesota is facing unprecedented retirements and shortages of RI District 5580 District Grant Proposal-Application: Page 3 of 11

4 many technical trade professions, including welders, CNC machinists, electrical technicians, and metal and plastic fabricators. The ability to attract young people into a career in the trades is often dependent on what they get exposed to as students in the secondary school system. The Modern Manufacturing Learning Lab will enhance students experiences in what a career in the trades could be like by providing them an opportunity to learn in a modern setting that will be very similar to what they will experience in the workplace. The machines on which students are taught need to be modern, up-to-date, and be in sync with the industry. Industry trade jobs are a top tier career choice for those who are properly trained. Current ongoing demand for trade-trained workers in west central Minnesota, according to the Minnesota Department of Employment and Economic Development, is nearly 2000 potential employees. The Modern Manufacturing Learning Lab, as originally envisioned and implemented to date, will teach the work skills of computer numeric controlled (CNC) machines, creativity, innovation and accuracy-skills that are in demand by many employers in our area. The goal is to help our students be the next generation of eager, passionate, successful workers and business owners. The vertical mill which the Rotary Clubs of Fergus Falls seek to fully fund through this grant request, is integral to achieving this goal. History: Many schools in Minnesota have abandoned their training for the trades, due to reduced funding for vocational training, and pressure to meet standardize testing achievement in academic subjects. The Fergus Falls Public School, however, has continued to offer classes in the traditional vocational trades, including welding, machining, and electricity since the heyday of vocational education in the 1970s. In fact the Fergus Falls curriculum still requires all students to have some introduction to trade skills. In the last 10 years, there has been a renaissance in manufacturing and an exploding use of technology as a way to make things. Manufacturing used to mean repetitious work requiring minimal skill. Today it s exciting, creative work that requires people with ability and skill to design projects and operate complex machines driven by computers, 3D printers and lasers. Plan: When the Modern Manufacturing Learning Lab project began, the Fergus Falls High School vocational classroom was equipped with 1970s-era welders and metal lathes. Upgrading to a modern manufacturing lab with computer aided machines has been and will be a great benefit to the students. Starting with 9th grade classes, all students will have a chance to experience a modern work environment where their creativity can be unleashed and the excitement of making their ideas come to life will give them the confidence to be innovative in whatever line of work they pursue in the future. The conversion to the Modern Manufacturing Lab is nearly complete, taking less than two years of the originally planned three year project. In the first year we concentrated on improving safety features like installing a commercial-grade non-slip floor coating, improving the welding ventilation system with down draft welding tables. Electrical infrastructure improvements were also made to prepare for new equipment planned as part of the project. The wall and ceiling painting and improved lighting made a remarkable difference in the ambience of the classroom, making it feel like a modern day work setting. We then began acquiring the equipment necessary in a modern day work environment. The list of equipment needed to provide the desired training was developed in consultation with M State College technical trainers, manufacturing engineers and high school instructors. In the spring of 2015, based on the upgrades that have and will be completed to the Modern Manufacturing Learning Lab and the additional training that our vocational teachers have obtained, five teachers designed and received school board approval to start a new curriculum using the Modern Manufacturing Learning Lab. The STEM (science, technology, engineering and math) Academy will start this fall with 23 students enrolled as 10 th graders. In each of the next two years, 11 th and 12 th grade students will be added. Students in the STEM Academy, through use of the Modern Manufacturing Learning Lab, will experience a practical application of otherwise abstract academic subjects. The capstone project in the senior year will be to build a high mileage car and compete in regional competition. The students in the STEM Academy are new students to tech classes. All other metal and wood shop classes have maintained their enrollment at approximately 130 students since the project started. In the school year, more than 150 students will use the Modern Manufacturing Learning Lab for some part of their education. The students basic education will be enhanced by 1) project based problem solving; 2) increased application of math concepts; 3) developing technical reading and writing skills; and 4) learning to use modern manufacturing technology that they will experience in a work setting. Curriculum will be redesigned annually to take advantage of the modern equipment. Area manufacturers have already committed to providing mentors in the classroom for students and instructors. The task force that identified the equipment to be purchased included two vertical mills, which produce a product by removing material with a rotating cutting tool. The vertical mills will replace the old milling machines that had hand crank handles and a linear scale to gauge the distance the machine moves. Now those motions are all computer-controlled, which reflects current industry practice. In the student setting, a vertical mill will be used mostly with aluminum and plastic because those two materials are the most forgiving to the tooling (softest). Through this process students will learn the joy of making things and the careers that are available to those skills, giving them exposure to manufacturing and engineering to help guide them in their post-secondary choices. Consideration was given to purchasing one vertical mill and a piece of equipment called the CNC turning center but it was agreed that the continuity of machines in the classroom would be the best for the students learning experience, considering the amount of time they will have in the lab and to maximize the number of students exposed to the process. With the purchase of each machine for use by a learning institution, we will receive a standalone controller; thus, with the second machine there will be able to be two students (or small groups) working on the machine and another two programming at a desktop station. This is only the first school year since the initial upgrades but there are already 21 students attending the STEM classes that will spend considerable time in the Modern Manufacturing Learning Lab. This number is expected to grow and two machines and two extra controllers are necessary to support these numbers. Thus, funding and obtaining the second vertical mill is essential to accomplishing the original goals established for the Modern Manufacturing Learning Lab project. RI District 5580 District Grant Proposal-Application: Page 4 of 11

5 Once the second vertical mill is obtained, there is already in place a Tech Ed Advisory Committee that serves to instruct the vocational teachers as to the needs of the business community so they can structure their curriculum appropriately. This group, which includes a Rotarian from the Noon Club (Mike Westergard) and one from the Sunrise Club (Evan Westra) has agreed to take on the task of making sure this project, and manufacturing exposure for students in Fergus Falls, stays strong well into the future. They will also be in a position to involve other Rotary members, where needed, to support the ongoing success of the overall project. The anticipated start date for the project is this month, September 2015, with all cash to be received by April 1, 2016, to allow installation of the second vertical mill by the start of the 2016 school year. RI District 5580 District Grant Proposal-Application: Page 5 of 11

6 SECTION 4: ROTARY INTERNATIONAL DISTRICT PRIMARY CLUB Explanation: The Rotary International District 5580 primary club is the club sponsoring the project. A committee of at least three Rotarians from this club must be established to oversee the project. The primary project contact must be a member of the primary club identified below. The project committee must be composed of members of the sponsor Rotary club for club-sponsored projects or district for district-sponsored projects. The committee members must be committed for the duration of the grant process. Please provide the primary address for all committee members, as all Rotary information will be sent to this address. It is highly recommended that the primary contact (who receives all information from the District Grants Subcommittee) have an address to expedite communication. Primary Club Club Fergus Falls, MN Noon Club ID number 1399 District 5580 Country USA Primary Contact: Name: Robert L. Russell Member ID: Club: Fergus Falls, MN Noon and member of Modern Manufacturing Learning Lab Task Force Rotary position: Club Foundation Chair Address: 220 W. Washington Ave., Suite 103 City: Fergus Falls State/Province: MN Postal code: Country: USA rrussell@prtel.com Cell phone: Home phone: Office phone: Fax: Project Contact #2: Name: Mike Westergard Member ID: Club: Fergus Falls, MN Noon Rotary position: Past President and member of Modern Manufacturing Learning Lab Task Force Address: 1221 S. Cascade St. City: Fergus Falls State/Province: MN Postal code: Country: USA mwestergard@stonel.com Cell phone: Home phone: Office phone: Fax: Project Contact #3: Name: Dean Monke Member ID: Club: Fergus Falls, MN Noon Rotary position: Past President and member of Modern Manufacturing Learning Lab Task Force Address: 1000 Mt. Faith Ave. City: Fergus Falls State/Province: MN Postal code: Country: USA dmonke@fergusotters.org Cell phone: Home phone: Office phone: Ext Fax: RI District 5580 District Grant Proposal-Application: Page 6 of 11

7 SECTION 5: ROTARY INTERNATIONAL DISTRICT 5580 ADDITONAL CONTRIBUTING ROTARY CLUBS or DISTRICT PARTNERS Explanation: An additional contributing partner is a Rotary club or district who is not the sponsoring club or the host club. The additional contributing partner primary project contact must be a member of the additional contributing Rotary club identified below and must be committed for the duration of the grant process from application through implementation and final reporting. Please provide the primary address for additional contributing Rotary club(s) and district partner(s), as all Rotary information will be sent to this/these address (es). It is highly recommended that the primary contact(s) (who receives all information from the D5580 Grants Committee) have an address to expedite communication. Additional Contributing Club #1 Club Fergus Falls, MN Sunrise Club ID number: District 5580 Country: USA Additional Contributing Club #1 Primary Contact: Name: Kim Embretson Member ID: Club: Fergus Falls, MN Sunrise Rotary position: Big idea chair Address: 736 S. Tower Rd. City: Fergus Falls State/Province: MN Postal code: Country: USA embretson@charter.net Cell phone: Home phone: Office phone: Fax: Additional Contributing Club #2 Club: Club ID number: District: 5580 Country: USA Additional Contributing Club #2 Primary Contact: Name: Member ID: Club: Rotary position: Address: City: State/Province: Postal code: Country: USA Cell phone: Home phone: Office phone: Fax: Additional Contributing Club #3 Club Club ID number District 5580 Country USA Contributing Club #3 Primary Contact: Name: Member ID: Club: Rotary position: Address: City: State/Province: Postal code: Country: USA Cell phone: Home phone: Office phone: Fax: RI District 5580 District Grant Proposal-Application: Page 7 of 11

8 SECTION 6: PROJECT FINANCING Explanation: Clearly list all financing in U.S. dollars noting which funds will be contributed in cash and which will be contributed from District Grant Funds (DGF). The district Rotary Foundation Committee Chair must authorize use of District Grant Funds. Project finances must match projected project budget. NOTE: No funds should be spent and no work should be started on this specific project prior to official Rotary International District 5580 Grants Committee approval. Upon approval, a notice will be sent to the sponsors informing them of approval and providing detailed instructions on how and where to submit their contributions and reports. RI District 5580 Rotary clubs Cash (US$) DGF (US$) Fergus Falls, MN Noon $1, $1, Fergus Falls, MN Sunrise $1, $1, DRFC Chair D-5580 DRFC Chair Authorization Dist. Governor D-5580 Dist. Governor Authorization Total D-5580 Club & DG Funds $3, $3, Roly Turner Craig Loughery Subtotals, Cash and DGF $3, $3, TOTAL Cosponsor contributions 6, Additional non-rotarian outside funding (not matched by or forwarded to RI District 5580) 26, Total project financing (Must equal Project Budget page Total) 32, RI District 5580 District Grant Proposal-Application: Page 8 of 11

9 SECTION 7: AUTHORIZATIONS Explanation: Authorizations ensure that all partners are aware of, and interested in, pursuing the described project. By signing below, the current club presidents for club-sponsored projects and current district grants subcommittee chair for district-sponsored projects, as well as the committee members, agree to the criteria listed and affirm their support of the project. All Rotary clubs, districts, and Rotarians involved in this project are responsible to The Rotary Foundation (TRF) for the implementation of the project and its subsequent reporting. The signatures of all involved parties confirm that they understand and accept responsibility for the project. Parties may either sign this page or submit a separate letter of commitment. By signing the next page below, we agree to the following: All information contained in this application is, to the best of our knowledge, true and accurate, and we intend to implement the project as presented in this application. Any alterations or changes in scope must have the expressed approval of the D5580 Grants Committee Chair. The club/district agrees to undertake this project as an activity of the club/district. We ensure all cash contributions (as detailed in Project Financing) will be forwarded directly to the project account after RI D-5580 Grants Committee approval of the grant. RI D-5580, RI and TRF may use information contained in this application to promote the project by various means such as district publications, The Rotarian, the RI international convention, RVM: The Rotarian Video Magazine, etc. The partners agree to share information on best practices when asked, and RI D-5580 and TRF may provide partners contact information to other Rotarians who may wish advice on implementing similar projects. To the best of my knowledge and belief, except as disclosed herewith, neither I nor any person with whom I have or had a personal or business relationship is engaged, or intends to engage, in benefiting from TRF grant funds or has any interest that may represent a potential competing or conflicting interest. A conflict of interest is defined as a situation in which a Rotarian, in relationship to an outside organization, is in a position to influence the spending of TRF grant funds, or influence decisions in ways that could lead directly or indirectly to financial gain for the Rotarian, a business colleague, or his or her family, or give improper advantage to others to the detriment of TRF. (NOTE: Any and all exceptions must be explained in an attached statement.) The club agrees to comply with all applicable terms and conditions of The Rotary Foundation Memorandum of Understanding and The Rotary Foundation Future Vision RI District 5580 Addendum to The Rotary Foundation Club Memorandum of Understanding. The Rotary Foundation, RI D-5580 Audit Committee and/or the RI D-5580 District Foundation Compliance Officer have the authorization to audit the project at any time. RI District 5580 District Grant Proposal-Application: Page 9 of 11

10

11 SECTION 11: COMPLETION CHECKLIST Before submitting your District Grant application, please take a moment to review this checklist. If you have any questions or concerns, please contact the appropriate District Grants Mentor or D-5580 Grants Committee Chair Person. NOTE: To select a box, double click on it. Then, from the sub-menu select checked or not checked, then click on Okay The project meets all grant policies and guidelines (see The Guide to Matching Grants [144-EN] or the RI Web site at The project description clearly states how the project will assist those in need. The activities of Rotary International District 5580 clubs are clearly explained. The Rotarians will be actively involved in the project. The District 5580 club(s) and partners have created committees to oversee the project. These individuals are correctly listed on the application with their complete contact information. A detailed, itemized budget is included in the application. All partner contributions are listed in the application, noting which contributions will be cash and which will be DGF. The Rotary Club President and District Grants Committee Chair from District 5580 (and partner(s)) have provided their authorizing signatures. All committee members (three for projects within D-5580) have provided their authorizing signatures. or N.A. If a cooperating organization is involved, the following letters are included with the application: 1. or N.A. A letter from the organization specifically stating its responsibilities, how it will interact with Rotarians, and agreeing to cooperate in any financial review of the project. 2. or N.A. A letter of endorsement from the NGO partner confirming that the cooperating organization is reputable and works within the laws of that community / country, 3. or N.A. If the project involves a revolving loan or microcredit, are the Revolving Loan Fund Supplement and Credit Group Plan included? The DRFC chair has provided his/her signature authorizing the use of District Grant Funds. The District Governor has provided his/her signature authorizing the use of District Grant Funds. The D-5580 Grants Committee chair has certified the application as complete and eligible. The Rotary Club (and partners) have made copies of all documents for their files prior to submitting electronically to District 5580 Grants Chair Blake Crosby bcrosby@far.midco.net and Diane Collins bigfish@uslink.net Diane will post to the District website for the D-5580 Grants Committee to review. RI District 5580 District Grant Proposal-Application: Page 11 of 11

12 April 8, 2015 Quotation Summary # 5532 Haas TM-1P Toolroom Mill $37,100 Standard Features: 30 x 12 x 16 (xyz), 7.5-hp, 6,000 rpm, full enclosure, 10 station tool changer, 15 gallon flood coolant, full enclosure, single- or three-phase power, intuitive programming system, USB, 1MB 1 Year Extended Warranty ESW-1-YEAR $6,195 Included Rigid Tapping- RTAP-3 1, Machine Investment.$38, School Offering $32, Offering also includes one Haas control simulator with lathe and mill software. Charges for freight and rigging are NOT INCLUDED in the above quote. We can assist you in arranging shipping and a rigging company, and would be happy to coordinate the delivery of your machine with all parties. The above offering does include freight to Minnesota, installation by a factory trained technician, and training classes for as long as you own the machine held at Productivity Inc./Haas Factory Outlet in Plymouth, MN th Avenue North Plymouth, MN

13 In closing I can say with confidence that Haas is a remarkable American machine tool company. We have now installed thousands of Haas machine tools within our territory, and worldwide Haas has installed over 150,000 machine tools. The reason for this growth is that the machines have the features, function, and ease of operation that machinists like, plus they are affordable, accurate and rugged for a wide variety of machining applications. All of the Haas machines are truly made in the USA. They are cast, machined, and assembled here, and the few out-sourced parts are from suppliers local to Haas. Haas is presently building approximately 1400 machines a month from its California plant, and growing. The vast majority of the precision machine tools used at the Haas factory are less than three years old. All Haas machine components go directly from the machining and inspection area on to assembly. At sub assembly, ipads with clear and specific procedures, photos, videos, and the most recent engineering changes aid the workers; which eliminates assembly errors. The spindles are balanced for smooth cutting performance. All machines are test run and inspected, and the results shipped with every machine. The commonality of parts throughout the Haas product line greatly contributes to a reduced cost for the entire machine. Haas machines have the best overall value in the machine tool industry today, and maintain the most value when you re ready to trade for a new Haas. All of the Haas machines are strongly supported at Productivity by a qualified staff of factory trained service technicians and applications engineers ready to serve you from our own "Haas Factory Outlet" including 17 vans stocked with Haas parts to perform a one visit service call. Haas can also ship 99.5% of all needed spare parts the same day. The west coast time zone helps this by 2 additional hours each day. FOB: Haas Factory - Oxnard, CA Estimated Factory Exit: Estimated at 3-4 Weeks Terms: 10% Down, 80% Prior Shipment, 10% Net 30 Thank you for this opportunity to offer our equipment and services. Please contact me if you have any questions or suggestions. We look forward to a successful Haas installation. Sincerely, Matt Mangulis Productivity, Inc th Avenue North Plymouth, MN

14 [ S p e c i a l S e r i e s ] Haas TM Series The Toolroom Mills Shop-proven, 40-taper vector drive spindle The Haas Intuitive Programming System allows full CNC operation without knowing G-code Generous Z-axis travel for tall parts and long tools High-performance brushless servomotors on all axes Warranty: 1 Year Parts and Labor [ TM Standard Features ] Full CE-Compliant Enclosure Haas Intuitive Programming System User-Friendly Haas Control 4000-rpm Vector Drive Spindle Standard 40-Taper Tooling Brushless Servos on All Axes 15" Color LCD Monitor w/usb Port LED Beacon Light LED Work Light Easy to Set Up and Operate Made in the USA [ P Models Also Include ] 10-Station Automatic Tool Changer 6000-rpm Vector Drive Spindle 400 ipm Rapids and Feedrates Coolant Pump Kit [ Options ] partial list 20-Station Automatic Tool Changer 1 4th- and 5th-Axis Drives Coordinate Rotation & Scaling Programmable Coolant Nozzle Intuitive Probing System User-Definable Macros Rigid Tapping Spindle Orientation High-Flow Coolant Pump Kit Chip Auger 2 1) 2P and 3P only. 2) P models only. Haas Automation, Inc Made in U.S.A. Specifications subject to change without notice. Not responsible for typographical errors. Machines shown with optional equipment. Actual product appearance may differ.

15 [Technical Specifications] Haas TM Series The Toolroom Mills The Haas TM Series machines are affordable, easy to use, and offer the precision control of the Haas CNC system. They use standard 40-taper tooling, and are very easy to learn and operate even without knowing G-code. Intuitive Programming System Use the top tab menu to select the operation to perform. C Choose from the lower tabs to define the specific operation. A Fill in the requested information and press Cycle Start. Operating Dimensions TM-1 1P TM-2 2P TM-3 3P A. Max Operating Height 105" mm 105" mm 105" mm B. Max Operating Width 1 96" mm 121" mm 121" mm C. Max Depth 2 82" mm 87" mm 98" mm B [ Specifications ] Travels TM-1 1P TM-2 2P TM-3 3P X 30" 762 mm 40" mm 40" mm Y 12" 305 mm 16" 406 mm 20" 508 mm Z 16" 406 mm 16" 406 mm 16" 406 mm Spindle Nose to Table Top ~4-20" ~ mm ~4-20" ~4-20" ~ mm ~ mm Table Length 47.75" mm 57.75" mm 57.75" mm Width 10.5" 267 mm 10.5" 267 mm 14.5" 368 mm Max Weight on Table up to 1000 lb evenly dist. up to 454 kg evenly dist. T-Slots T-Slot Width 5/8" 16 mm 5/8" 16 mm 5/8" 16 mm Number of T-Slots Center Distance 4.00" mm 4.00" mm 4.92" mm Spindle Taper Size #40 Taper Speed (rpm) Drive System Direct Speed, Belt Drive Max Torque rpm rpm Spindle Max Rating 7.5 hp 5.6 kw Brushless Axis Motors Max Thrust Rating Feedrates Max Rapids X Axis Y Axis Z Axis Max Cutting 2000 lb N ipm m/min ipm m/min ipm m/min ipm m/min Tool Changer Capacity NA 10 NA 10/20 NA 10/20 Tool Type/Taper CT or BT 40 Max Tool Diameter 3.5" 89 mm Max Tool Weight 12 lb 5.4 kg Tool-to-Tool (avg) 5.7 sec General Air Required 4 scfm, 100 psi 113 Lpm, 6.9 bar 1 Add 16" (406 mm) if chip auger is installed. 2 With control swung forward. Additional 36" (914 mm) required to open rear service panel. C E R T I F I E D Specifications subject to change without notice. Not responsible for typographical errors. Actual product appearance may differ. Machines shown with optional equipment. Sept 2015

Rotary International District 5580 District Grant Application Grant #

Rotary International District 5580 District Grant Application Grant # Rotary International District 5580 District Grant Application Grant # Note: Rotarians completing this District Grant Application should submit this form to the appropriate Rotary International District

More information

The Rotary Foundation (TRF) Matching Grant Application Instructions

The Rotary Foundation (TRF) Matching Grant Application Instructions The Rotary Foundation (TRF) Matching Grant Application Instructions a What is a Matching Grant? Matching Grants support international humanitarian service projects. Rotary clubs or districts from two countries

More information

Matching Grant Application The Rotary Foundation (TRF)

Matching Grant Application The Rotary Foundation (TRF) Matching Grant Application The Rotary Foundation (TRF) PROJECT DESCRIPTION Explanation: Matching Grants support the humanitarian service projects of Rotary clubs and districts. In this section, describe

More information

Matching Grant Application The Rotary Foundation (TRF)

Matching Grant Application The Rotary Foundation (TRF) Matching Grant Application The Rotary Foundation (TRF) PROJECT DESCRIPTION Explanation: Matching Grants support the humanitarian service projects of Rotary clubs and districts. In this section, describe

More information

Matching Grant Application The Rotary Foundation (TRF)

Matching Grant Application The Rotary Foundation (TRF) Matching Grant Application The Rotary Foundation (TRF) PROJECT DESCRIPTION Explanation: Matching Grants support the humanitarian service projects of Rotary clubs and districts. In this section, describe

More information

District 5580 World Community Service (WCS) Matching Grant Application Instructions

District 5580 World Community Service (WCS) Matching Grant Application Instructions District 5580 World Community Service (WCS) Matching Grant Application Instructions What is a Matching Grant? Matching Grants support international humanitarian service projects. Rotary clubs or districts

More information

Matching Grant Application The Rotary Foundation (TRF)

Matching Grant Application The Rotary Foundation (TRF) Matching Grant Application The Rotary Foundation (TRF) PROJECT DESCRIPTION Explanation: Matching Grants support the humanitarian service projects of Rotary clubs and districts. In this section, describe

More information

The Rotary Foundation (TRF) Matching Grant Application Instructions

The Rotary Foundation (TRF) Matching Grant Application Instructions The Rotary Foundation (TRF) Matching Grant Application Instructions What is a Matching Grant? Matching Grants support international humanitarian service projects. Rotary clubs or districts from two countries

More information

Matching Grant Application The Rotary Foundation (TRF)

Matching Grant Application The Rotary Foundation (TRF) Matching Grant Application The Rotary Foundation (TRF) PROJECT DESCRIPTION Explanation: Matching Grants support the humanitarian service projects of Rotary clubs and districts. In this section, describe

More information

Matching Grant Application The Rotary Foundation (TRF)

Matching Grant Application The Rotary Foundation (TRF) Matching Grant Application The Rotary Foundation (TRF) PROJECT DESCRIPTION Explanation: Matching Grants support the humanitarian service projects of Rotary clubs and districts. In this section, describe

More information

Project: Click here to enter text.

Project: Click here to enter text. 6250 District Grant Request Application 2018-2019 Rotary Year Project: 1 District Grant Definition & Purpose What is a District Grant? District Grants (DG) match support from local clubs for humanitarian

More information

The Rotary Foundation (TRF) Matching Grants Application For grant requests of US$ 5,000 to US$ 150,000

The Rotary Foundation (TRF) Matching Grants Application For grant requests of US$ 5,000 to US$ 150,000 The Rotary Foundation (TRF) Matching Grants Application For grant requests of US$ 5,000 to US$ 150,000 Rotarians may use this application and attach additional pages as needed or may answer the questions

More information

SUCCESSFUL CAPSTONE DESIGN PROJECT

SUCCESSFUL CAPSTONE DESIGN PROJECT How to sponsor a SUCCESSFUL CAPSTONE DESIGN PROJECT FOR INFORMATION OR TO DISCUSS YOUR PROJECT IDEA, PLEASE CONTACT: Mary I. Frecker, Ph.D. Director, Bernard M. Gordon Learning Factory The Pennsylvania

More information

SUCCESSFUL CAPSTONE DESIGN PROJECT

SUCCESSFUL CAPSTONE DESIGN PROJECT How to sponsor a SUCCESSFUL CAPSTONE DESIGN PROJECT FOR INFORMATION OR TO DISCUSS YOUR PROJECT IDEA, PLEASE CONTACT: Matthew Parkinson Director, Bernard M. Gordon Learning Factory The Pennsylvania State

More information

The Guide To MaTchinG GranTs

The Guide To MaTchinG GranTs The Guide To Matching Grants I can t describe how much we appreciate what you have made here. Our children will grow up remembering the good deeds of Rotarians. community leader stanis bai, ulamona, papua

More information

District 5390 Grant Guidelines

District 5390 Grant Guidelines District 5390 Grant Guidelines District Grants Overview District Grants are funded by The Rotary Foundation (TRF) solely with allocations from the District Designated Funds (DDF). The DDF equals half of

More information

Global Grant Record - GG Grant Title - Status - Approved District Number 5840 (Qualified)

Global Grant Record - GG Grant Title - Status - Approved District Number 5840 (Qualified) OBJECTIVES WELCOME TO THE GLOBAL GRANT APPLICATION Your application has been assigned the reference number GG1527236, which you can use for tracking and when communicating with The Rotary Foundation or

More information

GLOBAL GRANT MANAGEMENT SEMINAR

GLOBAL GRANT MANAGEMENT SEMINAR GLOBAL GRANT MANAGEMENT SEMINAR DISTRICT 6860 April-May 2018 2 Purpose Global Grants Learn Global Grant requirements Learn eligible activities Qualify clubs to receive Global Grant funds 3 Global Grants

More information

District Rotary Year

District Rotary Year GUIDELINES Applications for District Grants are due by May 31, 2016. Only Rotary Clubs certified to administer Rotary Foundation funds (have signed a Memorandum of Understanding and have the appropriate

More information

1 Planning a Global Grant Project

1 Planning a Global Grant Project 1 Planning a Global Grant Project Before applying for a Rotary Foundation global grant, clubs should create a project that is supported by a strong partnership, based on community needs, and designed to

More information

Guide to Implementing the District MOU

Guide to Implementing the District MOU District Rotary Foundation Committee Manual 7 Guide to Implementing the District MOU Rotary Reminder Pilot districts in India have different club and district MOUs and procedures, so these districts should

More information

Leading Rotarians. Responsibilities

Leading Rotarians. Responsibilities 4 Leading Rotarians Ensure your leadership team has leadership skills and develop future leaders in your club by holding a workshop using the publication Leadership Development: Your Guide to Starting

More information

2009 Student Technology Fee Proposal Form

2009 Student Technology Fee Proposal Form 2009 Student Technology Fee Proposal Form Title of Project: ET 308 CAD/CAM Computer Lab Upgrade Department/Organization: Engineering Technology Name(s) of Project Applicant(s) Name Eric McKell MS 9086

More information

2016 Commercial Partner Information

2016 Commercial Partner Information 2016 Commercial Partner Information To provide facilities and training that increase our members skills and allows them to build their dream projects using our precision equipment while fostering a sense

More information

Rotary District 7710 Process Manual. District Grants

Rotary District 7710 Process Manual. District Grants Rotary District 7710 Process Manual The Rotary Foundation offers 2 types of grants within the Six Areas of Focus: District Grants and Global Grants. District grants District grants fund smaller, short-

More information

DISTRICT GRANT APPLICATION DISTRICT 5440

DISTRICT GRANT APPLICATION DISTRICT 5440 DISTRICT GRANT APPLICATION DISTRICT 5440 (TRF MISSION RELATED) GRANT GUIDELINES (effective 1/19/2012): The District goal is to have 100% participation in The Rotary Foundation and we encourage each club

More information

The Rotary Foundation (TRF) - Humanitarian Grants Program. District Grants District Guidelines

The Rotary Foundation (TRF) - Humanitarian Grants Program. District Grants District Guidelines The Rotary Foundation (TRF) - Humanitarian Grants Program District Grants 2013-2014 - District 9520 - Guidelines Index: Page No I. District Grants overview 1 II. District Grants Processes eligibility,

More information

Request for Proposal Hydraulic Rescue Tools. Date Issued: September 28 th, 2016

Request for Proposal Hydraulic Rescue Tools. Date Issued: September 28 th, 2016 Date Issued: September 28 th, 2016 Due Date: 12:00:00 p.m. (noon local time), October 13 th, 2016 Part 1 Introduction The Town of Okotoks is inviting the submission of proposals for the provision of Hydraulic

More information

Welcome to. DISTRICT 9930 District Assembly, Taupo, May GRANT MANAGEMENT SEMINAR For

Welcome to. DISTRICT 9930 District Assembly, Taupo, May GRANT MANAGEMENT SEMINAR For Welcome to DISTRICT 9930 District Assembly, Taupo, May 2017 GRANT MANAGEMENT SEMINAR For 2017-18 PURPOSE To understand the basics about grants To understand about applying for and managing Rotary grants

More information

Global Grant Application GRANT NUMBER STATUS

Global Grant Application GRANT NUMBER STATUS Global Grant Application GRANT NUMBER STATUS GG1863514 Draft Basic Information Grant title WEEP : Women's Education & Empoerment Project Type of Project Humanitarian Project Address community needs and

More information

Rotary District 5160 District Designated Funds District Grant and Global Grant Policy. Table of Contents

Rotary District 5160 District Designated Funds District Grant and Global Grant Policy. Table of Contents 2018-2019 Rotary District 5160 District Designated Funds District Grant and Global Grant Policy Table of Contents PURPOSE STATEMENT......1 OVERVIEW... 1 Definitions (grouped by subject activity)... 2 Areas

More information

International Foundation

International Foundation Lions Lions Clubs Clubs International Foundation International Foundation How to Apply for an LCIF Standard Grant What is an LCIF Standard Grant? An LCIF Standard grant is a matching grant opportunity

More information

DISTRICT Foundation Workshop - Grants

DISTRICT Foundation Workshop - Grants DISTRICT 7600 Foundation Workshop - Grants 2016-2017 Grants Overview References Global Grant 10 Steps District Grant 101 Question and Answer Session 2 GLOBAL VOCATIONAL TRAINING TEAMs (VTT) SCHOLARS DISTRICT

More information

LIONS CLUBS INTERNATIONAL FOUNDATION STANDARD GRANT APPLICATION

LIONS CLUBS INTERNATIONAL FOUNDATION STANDARD GRANT APPLICATION LIONS CLUBS INTERNATIONAL FOUNDATION STANDARD GRANT APPLICATION STANDARD GRANT CRITERIA AND REGULATIONS MISSION STATEMENT AND FUNDING PRIORITIES Standard grants provide capital funding to help establish

More information

ROTARY FOUNDATION GLOBAL GRANT HUMANITARIAN APPLICATION. District : (3) Describe how the project advances the goal of the area(s) of focus.

ROTARY FOUNDATION GLOBAL GRANT HUMANITARIAN APPLICATION. District : (3) Describe how the project advances the goal of the area(s) of focus. ROTARY FOUNDATION GLOBAL GRANT HUMANITARIAN APPLICATION ENGLISH(EN) Global Grant Project Title : YACHANA TECHNICAL INSTITUTE Global Grant Status : Paid Global Grant Tracking Number : 25571 Host and International

More information

District Grant Club Qualification Training

District Grant Club Qualification Training District Grant 2018-19 Club Qualification Training 2 Topics General Overview Critical dates Login to DACdb Details tab Contacts tab Application tab Budget tab Documents tab Signatures Final Report tab

More information

Rotary Awards Directory Rotary Awards Directory. Page 1 of 79

Rotary Awards Directory Rotary Awards Directory. Page 1 of 79 2013- Rotary Awards Directory Page 1 of 79 Table of Contents Overview of Rotary Awards Rotary offers awards to recognize the efforts and contributions of Rotarians, Rotary Clubs, and Non-Rotarians. Eligible

More information

1. Project Description Detroit Lakes KIVA Club. A. What is the purpose of this project?

1. Project Description Detroit Lakes KIVA Club. A. What is the purpose of this project? 1. Project Description Detroit Lakes KIVA Club A. What is the purpose of this project? The Detroit Lakes Breakfast Rotary Club, the Detroit Lakes Noon Rotary Club, and public school students in Detroit

More information

Public Art RFQ. California Air Resources Board. Request for Qualifications Public Art. California Air Resources Board

Public Art RFQ. California Air Resources Board. Request for Qualifications Public Art. California Air Resources Board Public Art RFQ California Air Resources Board Request for Qualifications Public Art California Air Resources Board Southern California Consolidation Project - #140769 4001 Iowa Avenue Riverside, Riverside

More information

Planning Guide

Planning Guide Giles County Technology Center The Career and Technical Education (CTE) programs at Giles County Technology Center offer students career pathways to achieve their goals of employment and further education.

More information

March 13, To All U.S. Conference of Mayors Members:

March 13, To All U.S. Conference of Mayors Members: March 13, 2014 To All U.S. Conference of Mayors Members: On behalf of The U.S. Conference of Mayors, Walmart and the Walmart Foundation, we are writing to invite you to be part of a compelling initiative

More information

Request for Proposal. Purchase of New Mobile Trailer Climbing Wall. No November 23, 2015

Request for Proposal. Purchase of New Mobile Trailer Climbing Wall. No November 23, 2015 Request for Proposal Purchase of New Mobile Trailer Climbing Wall No. 2016-002 November 23, 2015 1 Contents Price Proposal-----------------------------------------------------------------------------------------------------3

More information

The micro and nano precision specialist. SwissNano

The micro and nano precision specialist. SwissNano The micro and nano precision specialist SwissNano SwissNano The SwissNano was designed to meet the demand for small workpieces requiring very high precision. The kinematics of the machine enable it to

More information

Student Technology Fee AY 2017 Tech Initiatives Proposal Form. DUE April 3, 2017

Student Technology Fee AY 2017 Tech Initiatives Proposal Form. DUE April 3, 2017 Student Technology Fee AY 2017 Tech Initiatives Proposal Form DUE April 3, 2017 Project Title: Robotics Kit Replacement Department/Organization: Computer Science Project Applicant(s): Principal Contact

More information

Club Rotary Foundation Committee Manual

Club Rotary Foundation Committee Manual 2010-11 Future Vision Addendum to the Club Rotary Foundation Committee Manual A part of the Club Officers Kit 226E-EN (1109) This is the 2009 edition of the Club Rotary Foundation Committee Manual. It

More information

Carolinas PETS 2018: YOUR Rotary Foundation (Total Time: 60 Minutes) (Final 1/11/17)

Carolinas PETS 2018: YOUR Rotary Foundation (Total Time: 60 Minutes) (Final 1/11/17) Carolinas PETS 2018: YOUR Rotary Foundation (Total Time: 60 Minutes) (Final 1/11/17) Discussion Leader Notes Smile: Plan your engagement plan! (Note: This session has an IMPORTANT Best Practices Grid and

More information

GRANT MANAGEMENT SEMINAR

GRANT MANAGEMENT SEMINAR GRANT MANAGEMENT SEMINAR DISTRICT 5040 Facilitator: Garry Shearer District Foundation Chair PURPOSE Understand how to manage a Rotary grant Learn stewardship expectations Prepare clubs to implement the

More information

Austin County CERT Community Emergency Response Team Participant Application. Please print clearly

Austin County CERT Community Emergency Response Team Participant Application. Please print clearly Class # PARTICIPANT INFORMATION Austin County CERT Community Emergency Response Team Participant Application Please print clearly Last Name First M.I. Date Home Apt / P O Box # City State: TEXAS ZIP Home

More information

ECONOMIC OPPORTUNITY STUDIES

ECONOMIC OPPORTUNITY STUDIES ECONOMIC OPPORTUNITY STUDIES 400 NORTH CAPITOL STREET, SUITE G-80, WASHINGTON, D.C. 20001 Tel. (202) 628 4900 Fax (202) 393 1831 E -mail info@opportunitystudies.org How Many Workers Does the Weatherization

More information

FIRST Tech Challenge Application for Sylvania STEM Center FTC Robotics

FIRST Tech Challenge Application for Sylvania STEM Center FTC Robotics 2017-2018 FIRST Tech Challenge Application for Sylvania STEM Center FTC Robotics What is FIRST Tech Challenge (FTC)? FIRST Tech Challenge is designed for those who want to compete head to head (with robots),

More information

Florida Job Growth Grant Fund Workforce Training Grant Proposal

Florida Job Growth Grant Fund Workforce Training Grant Proposal Florida Job Growth Grant Fund Workforce Training Grant Proposal Proposal Instructions: The Florida Job Growth Grant Fund Proposal (this document) must be completed and signed by an authorized representative

More information

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017 SECTION 26 0800 - COMMISSIONING OF ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. The purpose of this section is to specify the Division 26 responsibilities and participation in the commissioning process.

More information

STEM Academy Project Based Learning

STEM Academy Project Based Learning STEM Academy Project Based Learning LIGHT Awards Program 2015 Laura Beaudrow 1234 Main Street San Francisco, CA 94105 info@lightawards.org Printed On: 7 October 2014 LIGHT Awards Program 2015 1 Application

More information

On-the-Job Training (OJT) Skills Training with a Paycheck

On-the-Job Training (OJT) Skills Training with a Paycheck On-the-Job Training (OJT) Skills Training with a Paycheck What is On-the-Job Training? OJT is. training provided to a WorkOne customer while they are engaged in productive work on a job that provides knowledge

More information

THE ROTARY FOUNDATION of Rotary International 1560 Sherman Avenue Evanston, IL USA

THE ROTARY FOUNDATION of Rotary International 1560 Sherman Avenue Evanston, IL USA THE ROTARY FOUNDATION of Rotary International Evanston, IL 60201-3698 USA 28 March 2006 Host Cosponsor Steve Achard, Project Contact Rotary Club of Fallbrook Village (D - 5340) 304 Shady Glen Drive Fallbrook,

More information

2018 Institutional Support of Research and Creativity (ISRC) and Teaching and Learning with Technology (TLT) Grants Program

2018 Institutional Support of Research and Creativity (ISRC) and Teaching and Learning with Technology (TLT) Grants Program 2018 Institutional Support of Research and Creativity (ISRC) and Teaching and Learning with Technology (TLT) Grants Program The New York Institute of Technology (NYIT) invites faculty to apply to the ISRC

More information

D9650 Rotary Foundation Grant Management Manual

D9650 Rotary Foundation Grant Management Manual D9650 Rotary Foundation Grant Management Manual 2017-18 (Updated Sept 2017) CONTENTS A guide to District Grants 2 Funding Model for D9650 for 2017-18 3 A guide to Global Grants 4 Foundation Areas of Focus

More information

FRANCHISE INFORMATION PACKAGE

FRANCHISE INFORMATION PACKAGE FRANCHISE INFORMATION PACKAGE newcreations.com Why should I buy a New Creations franchise? Profitability, proprietary materials & methods, and superior training. 2 TABLE OF CONTENTS 04 / ABOUT US 05 /

More information

2018 FELLOWSHIP GUIDELINES Accepting Applications May 10, 2018 June 28, 2018

2018 FELLOWSHIP GUIDELINES Accepting Applications May 10, 2018 June 28, 2018 2018 FELLOWSHIP GUIDELINES Accepting Applications May 10, 2018 June 28, 2018 The Prevent Cancer Foundation is the only U.S. nonprofit organization solely devoted to cancer prevention and early detection.

More information

Don Bosco Tech Society

Don Bosco Tech Society Don Bosco Tech Society Skilling India Fr. A M Joseph Executive Director Skilling India MISSION VISION Bridge digital,social and economic divide in India by significantly contributing to the development

More information

REQUEST FOR PROPOSALS

REQUEST FOR PROPOSALS REQUEST FOR PROPOSALS RFP # 17-03-14 MINOR MAINTENANCE AND REPAIRS (LIKE FOR LIKE) NOTE: This RFP replaces RFP #16-10-34 previously cancelled by the District. PART II The Houston Independent School District

More information

THE ROTARY FOUNDATION of Rotary International 1560 Sherman Avenue Evanston, IL USA

THE ROTARY FOUNDATION of Rotary International 1560 Sherman Avenue Evanston, IL USA THE ROTARY FOUNDATION of Rotary International Evanston, IL 60201-3698 USA 08 January 2008 Host Cosponsor Francisco Narvaez Vega, Project Contact Rotary Club of La Puntilla (D - 4400) La Puntilla Avda.

More information

2018 GRANT GUIDELINES Accepting Applications May 10, 2018 June 28, 2018

2018 GRANT GUIDELINES Accepting Applications May 10, 2018 June 28, 2018 2018 GRANT GUIDELINES Accepting Applications May 10, 2018 June 28, 2018 The Prevent Cancer Foundation is the only U.S. nonprofit organization solely devoted to cancer prevention and early detection. Since

More information

Career Technical Education Facilities Program (CTEFP) San Leandro High School CTE Program Plans

Career Technical Education Facilities Program (CTEFP) San Leandro High School CTE Program Plans Career Technical Education Facilities Program (CTEFP) San Leandro High School CTE Program Plans CTEFP Application Deliverables 1. Approved CTE Plan 2. Application Narrative 3. Budget 4. Conceptual Drawing

More information

DMACC Workforce Training Academy Vocational Training Programs

DMACC Workforce Training Academy Vocational Training Programs DMACC Workforce Training Academy Vocational Training Programs Are you looking for a rewarding career but need additional training? DMACC s Workforce Training Academy can help. Certificate classes provide

More information

Overview. Alaska Career and Technical Education Plan: A Call to Action

Overview. Alaska Career and Technical Education Plan: A Call to Action Overview Alaska Career and Technical Education Plan: A Call to Action Strategy 1.0: Make transitions planned and accountable for both successful student progress and systemic cooperation. 1.1. Ensure every

More information

SPECIFICATIONS FOR TENDER # SUPPLY OF HOSPITAL CRITICAL CARE BED FOR WESTERN HEALTH

SPECIFICATIONS FOR TENDER # SUPPLY OF HOSPITAL CRITICAL CARE BED FOR WESTERN HEALTH SPECIFICATIONS FOR TENDER #0171-1203 SUPPLY OF HOSPITAL CRITICAL CARE BED FOR WESTERN HEALTH CLOSING DATE: 3 FEBRUARY 2012 Invitation to Tender for Hospital Critical Care Beds 1.0 General Provisions 1.1

More information

VFD and Pump Incentive Application for Business Customers

VFD and Pump Incentive Application for Business Customers 2017 VFD and Pump Incentive Application for Business Customers A Cash Incentive Energy Efficiency Program brought to you by: Instructions for Use: For complete instructions, please refer to the Terms and

More information

DALTON PUBLIC SCHOOLS REQUEST FOR PROPOSAL. RFP FY18 Drivers Education RFP

DALTON PUBLIC SCHOOLS REQUEST FOR PROPOSAL. RFP FY18 Drivers Education RFP DALTON PUBLIC SCHOOLS PURCHASING DEPARTMENT REQUEST FOR PROPOSAL FOR RFP FY18 Drivers Education RFP RFP NUMBER (FY18 Drivers Education) ISSUED February 5th, 2018 Request for Proposal To: All Proposers

More information

Student Technology Fee AY 2016 Tech Initiatives Proposal Form. DUE April 11, 2016

Student Technology Fee AY 2016 Tech Initiatives Proposal Form. DUE April 11, 2016 Student Technology Fee AY 2016 Tech Initiatives Proposal Form DUE April 11, 2016 Project Title: High Resolution Cameras for Loan Pool Department/Organization: ATUS/ Classroom Services/ Equipment Loan Project

More information

EDUCATE. EMPOWER. TRANSFORM.

EDUCATE. EMPOWER. TRANSFORM. LABYRINTH LEARNING 2010 CATALOG EDUCATE. EMPOWER. TRANSFORM. MAKE TEACHING AND LEARNING EASIER WITH SMART SOLUTIONS FROM LABYRINTH unique instructional design innovative online tools instructor resources

More information

USDA Federal Government Grant Proposal

USDA Federal Government Grant Proposal USDA Federal Government Grant Proposal Scroll down to read the first part of this sample. When purchased, the complete sample is 38 pages long and is written using these Proposal Pack chapters: Cover Sheet,

More information

Student Technology Fee AY 2015 Tech Initiatives Proposal Form. DUE April 2, 2015

Student Technology Fee AY 2015 Tech Initiatives Proposal Form. DUE April 2, 2015 Student Technology Fee AY 2015 Tech Initiatives Proposal Form DUE April 2, 2015 Project Title: WWU MakerSpace Department/Organization: n/a Project Applicant(s): Principal Contact Name Max Smith MS Email:

More information

PROPOSAL SUBMITTALS: Responses to the Request for Proposal (RFP) are to be submitted to:

PROPOSAL SUBMITTALS: Responses to the Request for Proposal (RFP) are to be submitted to: C I T Y O F T U S T I N 3 0 0 C e n t e n n i a l W a y T u s t i n, C a l i f o r n i a 9 2 7 8 0 R E Q U E S T F O R P R O P O S A L S for a Boom Lift PROPOSAL SUBMITTALS: Responses to the Request for

More information

ACTIVE LEARNING CENTER GRANT PROPOSAL

ACTIVE LEARNING CENTER GRANT PROPOSAL ACTIVE LEARNING CENTER GRANT PROPOSAL Please use this Microsoft Word template to apply for the grant. We recommend that you reference the Steelcase Education Active Learning Center Proposal Guide, which

More information

DISTRICT GRANT APPLICATION (MATCHING DISTRICT GRANT or CLUB GRANT)

DISTRICT GRANT APPLICATION (MATCHING DISTRICT GRANT or CLUB GRANT) ROTARY INTERNATIONAL DISTRICT 6490 2014-2015 DISTRICT GRANT APPLICATION (MATCHING DISTRICT GRANT or CLUB GRANT) BEFORE SUBMITTING YOUR GRANT APPLICATION, CHECK ALL THE FOLLOWING REQUIREMENTS GRANT APPLICATION

More information

Florida Job Growth Grant Fund Workforce Training Grant Proposal

Florida Job Growth Grant Fund Workforce Training Grant Proposal Florida Job Growth Grant Fund Workforce Training Grant Proposal Proposal Instructions: The Florida Job Growth Grant Fund Proposal (this document) must be completed and signed by an authorized representative

More information

Request for Proposals (RFP) Moving office furniture from building 3A to building 22 and other CSIR store areas (in building 35 and 36)

Request for Proposals (RFP) Moving office furniture from building 3A to building 22 and other CSIR store areas (in building 35 and 36) Request for Proposals (RFP) Moving office furniture from building 3A to building 22 and other CSIR store areas (in building 35 and 36) RFP No. 816/16/02/2018 Date of Issue Friday, 02 February 2018 Friday,

More information

2018 SUMMER STUDY ABROAD SCHOLARSHIP

2018 SUMMER STUDY ABROAD SCHOLARSHIP PROGRAM OBJECTIVES 2018 SUMMER STUDY ABROAD SCHOLARSHIP Rotary District 6540, comprising of 56 Rotary clubs in Northern Indiana, makes available a scholarship in the amount up to $7,000 to the selected

More information

Grow Manufacturing Initiative. Initiative Host: NoRTEC & NRCD Corporate Sponsor: PG&E

Grow Manufacturing Initiative. Initiative Host: NoRTEC & NRCD Corporate Sponsor: PG&E Grow Manufacturing Initiative Year in Review 2015 Initiative Host: NoRTEC & NRCD Corporate Sponsor: PG&E Grow Manufacturing s main goal is to be the Voice for North State Manufacturing with Three Core

More information

Future Vision: Global Grants and Your Club

Future Vision: Global Grants and Your Club Future Vision: Global Grants and Your Club Thank you for joining us for today s webinar, Future Vision: Global Grants and Your Club. We are glad that you have chosen to join us to learn about the Future

More information

INSTRUCTION BOOKLET. HPNAP Operations Support and Capital Equipment Funds Funding Period: November 1, October 31, 2019

INSTRUCTION BOOKLET. HPNAP Operations Support and Capital Equipment Funds Funding Period: November 1, October 31, 2019 INSTRUCTION BOOKLET FOR HPNAP Operations Support and Capital Equipment Funds Funding Period: November 1, 2018- October 31, 2019 Ten (10) copies of application due at Food Bank of the Southern Tier by Monday,

More information

Prospective Supplier. Date: February 8, Subject: Request for Proposal # Residence Hall Mattresses

Prospective Supplier. Date: February 8, Subject: Request for Proposal # Residence Hall Mattresses To: From: Prospective Supplier Kip Smalligan, Sr Strategic Sourcing Specialist Grand Valley State University Procurement Services Ph 616/331-3211 Fx 616/331-3287 smalligk@gvsu.edu Date: February 8, 2017

More information

RFP FOR AV VENDOR. 18 th Annual National TAP Conference March 22-24, 2018 Gaylord National Resort National Harbor, MD

RFP FOR AV VENDOR. 18 th Annual National TAP Conference March 22-24, 2018 Gaylord National Resort National Harbor, MD RFP FOR AV VENDOR 18 th Annual National TAP Conference March 22-24, 2018 Gaylord National Resort National Harbor, MD POSTED: October 20, 2017 DEADLINE TO SUBMIT: November 6, 2017, by 5:00 p.m. CST *RFP

More information

Introduction and Instructions

Introduction and Instructions Alaska Village Energy Efficiency Program (VEEP) Funding Announcement & Instructions - RFA AEA-14-008 Announcement Date: July 1, 2013 Application Due Date: August 12, 2013 Introduction and Instructions

More information

PAUL HARRIS SOCIETY FREQUENTLY ASKED QUESTIONS

PAUL HARRIS SOCIETY FREQUENTLY ASKED QUESTIONS ENGLISH (EN) PAUL HARRIS SOCIETY FREQUENTLY ASKED QUESTIONS WHAT IS THE PAUL HARRIS SOCIETY? The Paul Harris Society recognizes Rotary members and friends of The Rotary Foundation who contribute $1,000

More information

Thank You for Getting Involved!

Thank You for Getting Involved! Coordinator Guide Thank You for Getting Involved! Thank you for joining Second Harvest Heartland in the fight to end hunger. Your Food & Fund Drive will make a big difference in the lives of our hungry

More information

Refer to section 2.C. for more information on the evaluation criteria.

Refer to section 2.C. for more information on the evaluation criteria. SOLARIZE RALEIGH PILOT PROGRAM DRAFT Request for Proposals from Installers of Residential Solar Photovoltaic Systems Proposed Posting Date: February 4, 2014 I. OPPORTUNITY SUMMARY: The North Carolina Solar

More information

2017 Institutional Support of Research and Creativity (ISRC) and Teaching and Learning with Technology (TLT) Grants Program

2017 Institutional Support of Research and Creativity (ISRC) and Teaching and Learning with Technology (TLT) Grants Program 2017 Institutional Support of Research and Creativity (ISRC) and Teaching and Learning with Technology (TLT) Grants Program The New York Institute of Technology (NYIT) invites faculty to apply to the ISRC

More information

A. General provisions and other electrical systems are specified in other Sections of Division 26.

A. General provisions and other electrical systems are specified in other Sections of Division 26. PART 1: GENERAL 1.01 DESCRIPTION: A. General provisions and other electrical systems are specified in other Sections of Division 26. B. Commissioning is an ongoing process and shall be performed throughout

More information

Universal City Storefront Improvement Program

Universal City Storefront Improvement Program Universal City Storefront Improvement Program To encourage the enhancement of storefronts on commercial, professional, and retail buildings in Universal City. Grant Funds Available Painting Doors Windows

More information

COMPANY PROFILE. Company Profile YOUR STRATEGIC PARTNER IN PRECISION ENGINEERING

COMPANY PROFILE. Company Profile YOUR STRATEGIC PARTNER IN PRECISION ENGINEERING YOUR STRATEGIC PARTNER IN PRECISION ENGINEERING COMPANY PROFILE Company Profile BLOCK 2019, BUKIT BATOK INDUSTRIAL PARK A STREET 23, # 02-258, SINGAPORE 659524 Contact : Louis Loh (+65 9005 9335) Office

More information

FARM ENERGY AND AGRI- PROCESSING APPLICATION (FEAP)

FARM ENERGY AND AGRI- PROCESSING APPLICATION (FEAP) The personal information that you provide on this form and any attachments will be used for the purpose of administering the Farm Energy and Agri- Processing Program. It is collected under the authority

More information

Rutgers Formula Racing

Rutgers Formula Racing Rutgers Formula Racing 118.9 62.0 September 2016 Issue No. 1 In the issue Message from the team sponsor highlight fundraising & outreach meet the team contact us To Sponsors, Friends, Family, and everyone

More information

THE ROTARY FOUNDATION of Rotary International 1560 Sherman Avenue Evanston, IL USA

THE ROTARY FOUNDATION of Rotary International 1560 Sherman Avenue Evanston, IL USA THE ROTARY FOUNDATION of Rotary International Evanston, IL 60201-3698 USA 18 April 2006 Host Cosponsor Agnes Phiri, Project Contact Rotary Club of Blantyre (D - 9210) P Bag 247 MW- Blantyre Malawi Agnes58@yahoo.com

More information

Indian Institute of Information Technology, Design and Manufacturing, Kurnool (IIITDM Kancheepuram Campus) Chennai Tender Document.

Indian Institute of Information Technology, Design and Manufacturing, Kurnool (IIITDM Kancheepuram Campus) Chennai Tender Document. Indian Institute of Information Technology, Design and Manufacturing, Kurnool (IIITDM Kancheepuram Campus) Chennai 600 127 Tender Document For Supply and Installation of CNC Router Machine 1 Date: 09.04.2018

More information

Career Technical Education Demonstration Project Grant Program Request for Engagement

Career Technical Education Demonstration Project Grant Program Request for Engagement Career Technical Education Demonstration Project Grant Program 2016-2018 Request for Engagement Jillian Balow State Superintendent of Public Instruction Wyoming Department of Education Department of Education

More information

IMPORTANT DATES TO REMEMBER. WORKSHOP APPLICATION DEADLINE June 14, 2017

IMPORTANT DATES TO REMEMBER. WORKSHOP APPLICATION DEADLINE June 14, 2017 2018 Creativation Show January 18 22, 2018 IMPORTANT DATES TO REMEMBER WORKSHOP APPLICATION DEADLINE June 14, 2017 BADGE REGISTRATION OPENS June 13,2017 ONLINE MARKETING BEGINS August 22, 2017 PREVIEW

More information

Continuing Professional Development (CPD) Procedure

Continuing Professional Development (CPD) Procedure 1. Purpose Continuing Professional Development () Procedure This procedures and guidelines document is intended to ensure consistency, fairness and business efficiency with respect to the process. It should

More information

smart technologies Neonatal incubator from standard to intensive care

smart technologies Neonatal incubator from standard to intensive care smart technologies Neonatal incubator from standard to intensive care Care of the youngest and most vulnerable patients is our priority in TSE. Protection and support of newborn babies has been our goal

More information